* feat: extend repeat op for vulkan
* feat: add repeat_f16 vulkan pipeline
* fix: ensure same dst and src types
* fix: use type_size instead of data types
* fix: use int16 and int32 for repeat shader op
* chore: rename repeat_f* to repeat_i*
* chore: rename repeat vulkan pipelines
* ggml-zendnn: fixed naming of matmul function
* ggml-zendnn: fixed naming of mul_mat_id function
* ggml-zendnn: fixed print in mul_mat_id
---------
Co-authored-by: plotnikov.v10 <plotnikov.v10@wb.ru>
* vulkan: add CONV_SHAPE_64x128 for medium-K conv2d
* vulkan: skip conv2d bounds checks when shapes align with tile sizes
* vulkan: use WG_SIZE=128 for CONV_SHAPE_64x32 conv2d
* vulkan: stage cm2 conv2d accumulator through shmem before global store
* vulkan: add coopmat1 conv2d path
* fallback when using too much shared memory. clean up comments
* Require 16x16x16 and subgroup size 32 or 64
* check whether shared memory is sufficient before overwriting conv2d params with coopmat1 values
* hexagon: add support for CONCAT with optimized concat_2d_transposed
qwen3.5 models are quite heavy on the CONCAT with large and transposed src1.
* hex-concat: use fastdiv in generic version
* hex-concat: make checks for transposed a bit more readable
* hex-concat: reoder dma ops for better pipelining
* hex-cont/cpy: optimize CPY and CONT ops
The primary change is to avoid scalar divs in the inner loops.
We were calling hvx_copy_uu(... type_size) where type_size is non a constexpr.
This causes runtime divs by that value which is normally just 4 or 2 (f32/f16).
* hex-get-rows: optimize GET_ROWS for large rows
We now use DMA for larger rows and also split them into chunks to improve perf for Qwen3.5 and other models
that do lots of GET_ROWS with huge (2MB+ rows).
Also bump the DMA queue depth now that we can take advantage of it.
* hex-concat: unroll the inner loops of concat_2d
* hex-concat: more updates to concat_2d to improve perf a bit further
* hex-cpy: fixed n_rows per thread checks in the copy ops
* hmx-fa: fix alignment issues while computing dma sizes
* hex-set-rows: add early returns for idle threads
* hvx-rope: minor optimization to replace loops with fastdiv logic
* hex-rope: replace scalar tail processing with HVX
* hex-rope: optimize rope cache init with HVX
Add hvx-utils sin/cos helpers that use an aprox method (similar to rsqrt, inverse, etc)
Use the helpers to optimize ROPE.
* ggml-webgpu: Add MMVQ path for Q4/Q8/Q2_K/Q4_K
* Fix to editorconfig checking pass
* Remove mul-mat-legacy pipeline
* Fix to use vendor name as is and add dot_product/vendor to shader_lib_ctx
* Only run webgpu CI on my fork
* Add webgpu only workflow
* refactor batch_compute_passes to a per-thread variable, and submit individual passes when it is set to false and no GPU profiling is enabled
* restore build.yml
This commit adds an ignore for bindings-ruby and bindings-go in
build.yml as these are handled by separate .yml file (separate jobs)
and don't need to trigger a full CI build.
* ci : add on push/pull_request paths ruby job
This commit adds paths to bindings-ruby to only build if changes where
made to bindings/ruby or to include/whisper.h.
* ci : add additional paths [no ci]
This commit re-enables the arm64 docker images builds which were removed
in Commit 9366544991
("ci : fix arm builds"). It also uses ubuntu-24.04-arm as the runner
which enables us to avoid QEMU.
Resolves: https://github.com/ggml-org/whisper.cpp/issues/2859
* ci : set GGML_NATIVE=OFF for bindings-java
This commit attempts to address an issue with the bindings-java job
which is currently failing.
I've not been able to reproduce this locally my windows machine and I
suspect that what might be happning is that windows job compiles on a
runner where it has different CPU features, for example AVX512 and when
this dll is used on a different runner that does not have that feature
it will crash.
Refs: https://github.com/ggml-org/whisper.cpp/actions/runs/26496174929/job/78059073255?pr=3829
* ci : also disable BMI2
* docs : add AGENTS.md and CONTRIBUTING.md [no ci]
This commit add AGENTS.md and CONTRIBUTING.md which are based on the
same files in llama.cpp. They have been modified slightly to fit with
whisper.cpp.
The motivation for this is to clarify the contribution policy in
whisper.cpp so that contributers can have a better understanding of the
expectations and requirements for contributing to the project.
* cli : merge tokens split across UTF-8 boundaries in JSON output
When a multi-byte UTF-8 codepoint (most commonly a CJK character, 3 bytes)
is split across multiple whisper tokens, the -ojf/--output-json-full
writer emitted each token's partial bytes as its own JSON string, producing
invalid UTF-8 that chokes downstream parsers.
Merge adjacent tokens in output_json whenever the accumulated text still
ends on an incomplete UTF-8 sequence. The merged entry keeps the first
token's id/p/t_dtw and extends t1 to the last absorbed token, which
matches how segment text is assembled elsewhere.
Refs #1798
* fix: address review — add braces for consistency, use full issue URL
- Add braces to if/else chain for codebase consistency
- Use full URL for issue #1798 reference
Review: @danbev
---------
Co-authored-by: texasich <texasich@users.noreply.github.com>
Co-authored-by: texasich <texasich@gmail.com>
* TP: fix ggml context size calculation, memory leak
* move split state cache back into the context
* revert to constant ggml context size for cgraphs
* increase headroom for statically allocated tensors
* remove obsolete include
* ggml: implement `gguf_init_from_buffer`
* test: `gguf_init_from_buffer`
* fix: memory breakdown for a model loaded with `no_alloc` from a file is consistent with being loaded from a buffer
* fix: use `GGML_UNUSED`
Co-authored-by: Copilot <copilot@github.com>
* fix: remove `total_size` from `gguf_reader`
* fix: file offset calculation, rename `offset` to `data_offset`
Co-authored-by: Copilot <copilot@github.com>
* refactor: extract model loader bug fixes to another PR
* feat: add `gguf_init_from_callback`
* fix: always require a max expected size
* fix: change `gguf_reader_callback_t`'s `output` type to `void *`, change `max_expected_size` and offsets to `uint64_t`
* fix: harden against offset overflow in buffer read
* fix: remove seek behavior from the callback
* feat: `max_chunk_read == 0` means `SIZE_MAX`
* fix: seeking in a gguf file with no tensors
---------
Co-authored-by: Copilot <copilot@github.com>
- Use OpenMP to parallelize iq2xs_init_impl and iq3xs_init_impl.
- Move the OpenMP detection from ggml-cpu to ggml-base.
- Update OpenMP dependencies in ggml-config.cmake.in.
- change `k_copy_src1_to_contiguous` so that uses a precomputed contiguous mapping where all rows "owned" by an expert are in one slice with a know starts and ends
- switch the `O(n_as * n_routed_rows)` contraption to a counting sort-based procedure with `O(n_as + n_routed_rows)` complexity
* SYCL: add BF16 to DMMV kernel path for ~4x token generation speedup
BF16 models had no dedicated token generation kernel — they fell through
to the generic full-GEMM path, resulting in ~14% memory bandwidth
utilization on Intel Arc GPUs. This adds BF16 support to the DMMV
(dequantize mul-mat-vec) path, matching the existing F16 implementation.
Fixes#20478
* SYCL: fix BF16 DMMV out-of-bounds when ncols % 64 != 0
The qk=1 kernel (used for F16 and BF16) iterates with stride
2*GGML_SYCL_DMMV_X (= 64 on Intel targets where WARP_SIZE=16). When
ncols is a multiple of DMMV_X (32) but not of 2*DMMV_X (64), the last
warp iteration accesses elements at col >= ncols, producing NaN for the
final row and wrong values for interior rows.
Fix: tighten can_use_dequantize_mul_mat_vec to require ne[0] %
(2*DMMV_X) == 0 for F16/BF16 types, and update the ASSERT in the BF16
launcher to match. Quantized types use block-structured kernels with
different access patterns and keep the existing DMMV_X check.
Verified: test-backend-ops MUL_MAT passes 913/913 on Intel Arc Pro B70.
Previously failing: m=128/129 n=1 k=1056 cases (NaN and ERR > 0.0005).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* vulkan: fuse snake activation (mul, sin, sqr, mul, add)
Add snake.comp shader with F32 / F16 / BF16 pipelines and
ggml_vk_snake_dispatch_fused. The matcher recognizes the naive 5 op
decomposition emitted by audio decoders (BigVGAN, Vocos) for snake
activation y = x + sin(a*x)^2 * inv_b and rewrites it to a single
elementwise kernel.
test_snake_fuse from the CUDA PR now also compares CPU naive vs
Vulkan fused across F32 / F16 / BF16.
* vulkan: address jeffbolznv review for fused snake activation
Rename T / C to ne0 / ne1 in the shader and push constants to match
the standard naming convention used across the Vulkan backend.
Tighten ggml_vk_can_fuse_snake: require x and dst to be contiguous
(the shader uses idx = i0 + i1 * ne0) and require a / inv_b to be
tightly packed on the broadcast dim (the shader reads data_a[i1]).
* vulkan: tighten snake fusion type checks for all operands (address jeffbolznv review)
* vulkan: reject snake fusion when ne[2] or ne[3] > 1 (address jeffbolznv review)
* vulkan: address 0cc4m review for fused snake activation
snake.comp is renamed to follow the ggml DATA_A_* / A_TYPE convention.
A_TYPE now applies to the activation tensor data_a instead of the
broadcast multiplier, and the bindings become data_a (A_TYPE), data_b
(float), data_c (float) and data_d (D_TYPE). A header at the top of
the shader maps each buffer to its role in y = x + sin(b * x)^2 * c.
On the C++ side, ggml_vk_can_fuse_snake reuses the existing snake_pattern
constant instead of duplicating the op list, sin_node is extracted as a
named local alongside the other chain nodes, and the broadcast operands
a and inv_b are now required to be GGML_TYPE_F32 to match the hardcoded
float bindings on data_b and data_c (the previous a->type == x->type
would silently reject any future BF16 or F16 chain once the supports_op
gate for SIN / SQR is lifted). ggml_vk_snake_dispatch_fused gets an
explicit GGML_TYPE_F32 case and GGML_ABORT on default in place of the
silent f32 fallback, and a stale comment about data_a[i1] / data_inv_b[i1]
is refreshed to match the new binding names.
* metal : fix GGML_OP_SET kernel threads
* tests : extend test_cpy to support different src/dst shapes
Extend test_cpy to support different source and destination tensor shapes
for CPY operations (reshaping), where the total number of elements must match.
- Renamed ne -> ne_src, added ne_dst parameter (default: use src shape)
- Added 50 new reshaping test cases covering 1D<->2D<->3D<->4D conversions
- Tests exercise 1024 boundary, small shapes, and large dimensionality changes
- Fixed dangling reference bug (storing & to temporary std::array)
- Updated all existing test calls with permute/transpose args for compatibility
Assisted-by: llama.cpp:local pi
* metal : optimize concat kernel with row batching for small widths
When ne0 < 256, batch multiple rows into a single threadgroup to improve
occupancy. This avoids underutilizing the GPU when processing narrow tensors.
- Dispatch nth = min(256, ne0) threads per group
- Calculate nrptg (rows per threadgroup) to fill up to 256 threads
- Update kernel index calculation to handle the row batching
- Add boundary check for i1 >= ne1
Assisted-by: llama.cpp:local pi
* tests : clean-up
* tests : refactor CPY shape tests to use dimension permutations
Replace 75 hardcoded test cases with a loop over permutations of
{3, 5, 7, 32} (total elements: 3360). Each src permutation is tested
against canonical sorted and reverse dst, skipping identical shapes.
Covers F32, F16, and Q4_0 (when both src and dst ne0 == 32).
Assisted-by: llama.cpp:local pi
* hexagon: remove gathers and better handling of vtcm in ssm-conv
* hexagon: relax ssm-conv gating requirements
* hexagon: add new prefill ssm-conv backend test
* hexagon: remove trailing white space
* hex-rope: uninline rope_cache_init, otherwise it breaks after rebaseing with SSM_CONV changes
---------
Co-authored-by: Max Krasnyansky <maxk@qti.qualcomm.com>
* opencl: refactor initialization
* opencl: refactor GPU identification
* opencl: rename for consistency
* opencl: cache global mem size in dev_ctx
* opencl: adjust log level
* opencl: load argsort and flash_attn kernels in supports_op
* argsort kernel must be built for supports_op for querying the max
workgroups
* flash_attn kernel has many variants, only load them when needed
l8bloom
Oliver Simons
Winston Ma
Vladislav
Jeff Bolz
Max Krasnyansky
Alexey Kopytko
Masashi Yoshimura
Nikhil Jain
Johannes Gäßler
forforever73
Aman Gupta
Daniel Bevenius
texasich
Georgi Gerganov
Gilad S
Kaihui-AMD
shaofeiqi
Yiwei Shao
dskwe
Shawn Gu
karavayev
Katostrofik
Sachin Sharma
Pascal
Chen Yuan
Matt Corallo
Todor Boinovski
lhez
Daniele