* feat(queue): show spool grams left in filament slot mapping
* Bumped version
* Add SpoolBuddy AMS slot config, external slots, and dashboard redesign
- AMS page: external spool slots (Ext/Ext-L/Ext-R), click-to-configure
modal on all slots, temperature/humidity threshold-colored indicators,
nozzle L/R badges for dual-nozzle printers, compact AMS-HT layout
- Dashboard: two-column layout with device status + printers list (left)
and current spool card (right), state-colored scale/NFC icons, dashed
border card styling
- Daemon: suppress redundant scale reports (±2g threshold + stability
state change detection) to prevent weight display bouncing
- TopBar: auto-select online printers only, SpoolBuddy logo
* Fix SpoolBuddy daemon crash when read_tag module is missing
NFCReader.__init__ imported read_tag and instantiated PN5180() outside
the try/except block, so a missing module crashed the entire daemon.
Moved the import inside the existing try/except so the daemon gracefully
skips NFC polling — matching the scale reader's existing behavior.
* Fix SpoolBuddy daemon failing to import hardware drivers
The daemon imports read_tag and scale_diag as bare modules, but they
live in spoolbuddy/scripts/ which isn't on sys.path when systemd runs
the daemon. Added scripts/ to sys.path at startup, resolved relative
to the module file. Also moved the read_tag import inside NFCReader's
try/except (was crashing the daemon instead of skipping gracefully)
and demoted hardware-not-available messages from ERROR to INFO.
* Increase scale moving average window to reduce weight bouncing
5 samples at 100ms (500ms window) wasn't enough to smooth NAU7802 ADC
noise — the averaged value still varied by >2g between 1s report
intervals, and the stability state kept flipping, triggering a report
every cycle. Increased to 20 samples (2s window) so noise is smoothed
before reaching the reporting layer.
* Remove stability flipping as scale report trigger
When ADC noise kept the spread hovering around the 2g stability
threshold, the stable flag toggled every cycle, forcing a report with
a slightly different weight each time. Now only actual weight changes
of >=2g trigger reports. The stable flag is still included in each
report for consumers that need it.
* Fix formatting of option elements in FilamentMapping
* Minor Spoolbuddy frontend improvements
* Updated Spoolbuddy install script to strip down Raspbian
* Updated Spoolbuddy install script
* Add API key auth support to /auth/me for SpoolBuddy kiosk
When Bambuddy auth is enabled, the SpoolBuddy kiosk gets redirected to
the login page because ProtectedRoute requires a user from GET /auth/me,
which only handled JWT tokens. The kiosk daemon already has an API key
but couldn't use it to satisfy the frontend auth check.
- Backend: /auth/me now accepts API keys (Bearer bb_xxx or X-API-Key)
and returns a synthetic admin UserResponse with all permissions
- Frontend: AuthContext reads ?token= from URL on first load, stores in
localStorage, and strips from URL (prevents history/referrer leakage)
- Install script: kiosk URL now includes ?token=${API_KEY}
- Tests: 3 new integration tests (Bearer API key, X-API-Key header,
invalid key rejection)
* SpoolBuddy touch-friendly UI overhaul for 1024x600 kiosk display
Enlarge all interactive elements across 9 SpoolBuddy components to meet
44px minimum tap targets on the RPi touchscreen. Increase nav icons
(20→24px), labels (10→12px), bar heights, section headers, printer
buttons, spool visualizations, fill bars, and status indicators.
Compact the dashboard stats bar and remove the printers card. Add
fullScreen prop to ConfigureAmsSlotModal with two-column layout
(filament list left, K-profile + color right) to eliminate scrolling.
* Updated CI
* Fix naive-vs-aware datetime crash from 0.2.1 timezone migration
The timezone fix (ed36eaf) replaced datetime.utcnow() with
datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's
SQLite DateTime columns strip tzinfo on read, returning naive datetimes.
Any Python-side comparison (subtraction, <, >) between an aware "now"
and a naive DB value raises TypeError.
Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)`
guards at all 8 affected comparison sites:
- maintenance.py: last_performed_at subtraction (500 on /maintenance/overview)
- auth.py: API key expires_at check (2 locations)
- print_scheduler.py: scheduled_time comparison
- smart_plug_manager.py: auto_off_pending_since elapsed calc
- smart_plugs.py: power_alert_last_triggered cooldown
- main.py: last_runtime_update elapsed calc
- archives.py: timelapse completed_at fallback
* Fix naive-vs-aware datetime crash from 0.2.1 timezone migration
The timezone fix (ed36eaf) replaced datetime.utcnow() with
datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's
SQLite DateTime columns strip tzinfo on read, returning naive datetimes.
Any Python-side comparison (subtraction, <, >) between an aware "now"
and a naive DB value raises TypeError.
Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)`
guards at all 9 affected comparison sites:
- maintenance.py: last_performed_at subtraction (2 code paths — days-based
and hours-based intervals both crashed on /maintenance/overview)
- auth.py: API key expires_at check (2 locations)
- print_scheduler.py: scheduled_time comparison
- smart_plug_manager.py: auto_off_pending_since elapsed calc
- smart_plugs.py: power_alert_last_triggered cooldown
- main.py: last_runtime_update elapsed calc
- archives.py: timelapse completed_at fallback
* Fix queue badge showing on printers without matching filament (#486)
The purple queue counter badge in the printer card header used the raw
unfiltered queue item count, so it appeared on ALL printers of the same
model when a job was scheduled for "any [model]" — even printers without
the matching filament color. The PrinterQueueWidget below it (which
shows "Clear Plate & Start") already filtered by filament type + color.
Apply the same filament compatibility filter (type check + color override
check) to the badge count so it only shows on printers that can actually
run the queued jobs.
* Fix Windows install syntax error from LF line endings (#544)
The start_bambuddy.bat launcher had Unix (LF) line endings. When a
user's git is configured with core.autocrlf=false or input, the file
is checked out with LF endings and cmd.exe fails with "the syntax of
the command is incorrect" before reaching the hash check.
Add .gitattributes forcing CRLF for *.bat files so they always get
correct line endings on checkout regardless of git config.
* Add SpoolBuddy tag detection modal and fix NFC reader silent failure
Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen
TagDetectedModal that auto-opens on NFC tag detection. Known spools show
remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with
printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer
"Add to Inventory" and "Link to Spool". Modal stays open on tag removal,
won't re-open for dismissed tags, reopens on re-place after removal.
Daemon: Fix PN5180 NFC reader silently stopping tag detection when the
reader drifts into a stuck state. Add auto-recovery (full hardware reset
after 10 consecutive errors), preventive RF cycling every 60s when idle,
and periodic status logging. Heartbeat now reports actual nfc_ok/scale_ok
from reader instances instead of hardcoded True.
* Add SpoolBuddy tag detection modal and fix NFC reader silent failure
Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen
TagDetectedModal that auto-opens on NFC tag detection. Known spools show
remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with
printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer
"Add to Inventory" and "Link to Spool". Modal stays open on tag removal,
won't re-open for dismissed tags, reopens on re-place after removal.
Daemon: Fix PN5180 NFC reader silently stopping tag detection. The reader
drifts into a stuck state where activate_type_a() returns None without
raising exceptions, making error-based recovery useless. Changed the
preventive idle maintenance from a lightweight RF off/on cycle to a full
hardware reset (RST pin toggle + RF re-init) every 60s — the same reset
that a service restart performs. Also added error-based auto-recovery
after 10 consecutive exceptions, promoted poll errors to WARNING, added
periodic status logging, and fixed heartbeat to report actual nfc_ok/
scale_ok instead of hardcoded True.
* Add SpoolBuddy tag detection modal and fix NFC reader polling
Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen
TagDetectedModal that auto-opens on NFC tag detection. Known spools show
remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with
printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer
"Add to Inventory" and "Link to Spool". Modal stays open on tag removal,
won't re-open for dismissed tags, reopens on re-place after removal.
Daemon: Fix PN5180 NFC reader failing to maintain tag detection. After a
successful SELECT the card stays in ACTIVE state and ignores subsequent
WUPA/REQA, causing immediate false "tag removed" events. Added a brief
RF off/on cycle (13ms) before each poll to force cards back to IDLE
state. Also added a preventive full hardware reset every 60s when idle
to recover from deeper stuck states where activate_type_a() silently
returns None without exceptions. Heartbeat now reports actual nfc_ok/
scale_ok instead of hardcoded True.
* Add SpoolBuddy tag detection modal and fix NFC reader polling
Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen
TagDetectedModal that auto-opens on NFC tag detection. Known spools show
remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with
printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer
"Add to Inventory" and "Link to Spool". Modal stays open on tag removal,
won't re-open for dismissed tags, reopens on re-place after removal.
Daemon: Fix PN5180 NFC reader failing to maintain tag detection. After a
successful SELECT the card stays in ACTIVE state and ignores subsequent
WUPA/REQA. Added a conditional RF off/on cycle (13ms) before each poll,
but only when a tag is present — resets card from ACTIVE to IDLE for
re-selection. The cycle is skipped when idle to avoid degrading reader
state with continuous RF toggling, which prevented new tags from being
detected after removal. Also added a preventive full hardware reset every
60s when idle to recover from deeper stuck states, error-based recovery
after 10 consecutive exceptions, and accurate heartbeat reporting of
NFC/scale health.
* Add SpoolBuddy tag detection modal and fix NFC reader polling
Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen
TagDetectedModal that auto-opens on NFC tag detection. Known spools show
remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with
printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer
"Add to Inventory" and "Link to Spool". Modal stays open on tag removal,
won't re-open for dismissed tags, reopens on re-place after removal.
Daemon: Fix PN5180 NFC reader failing to detect tags. Each
activate_type_a() call returning None corrupts the PN5180 transceive
state, silently preventing all subsequent tag detection. Fixed by
performing a full hardware reset (RST pin toggle + RF re-init) before
every idle poll (~240ms, ~1.8 Hz rate). When a tag is present, a light
RF off/on cycle (13ms) resets the card from ACTIVE to IDLE state for
continuous re-selection. Also added error-based recovery, periodic
status logging, and accurate heartbeat NFC/scale health reporting.
* Fix SpoolBuddy scale tare & calibration not being applied
The tare and calibrate buttons on the Settings page queued commands
but never executed them due to three broken links:
1. Daemon received tare command via heartbeat but never called
scale.tare() — the ScaleReader was available in shared dict
but unused
2. No API endpoint for the daemon to report the new tare offset
back to the backend DB, so tare results were lost
3. Heartbeat updated config but never called
scale.update_calibration(), so ScaleReader kept initial values
Added set-tare endpoint + API client method, and fixed heartbeat
loop to execute tare, persist the result, and propagate calibration
changes to the ScaleReader instance.
* Fix SpoolBuddy scale tare & calibration not being applied
The tare and calibrate buttons on the Settings page queued commands
but never executed them due to three broken links:
1. Daemon received tare command via heartbeat but never called
scale.tare() — the ScaleReader was available in shared dict
but unused
2. No API endpoint for the daemon to report the new tare offset
back to the backend DB, so tare results were lost
3. Heartbeat updated config but never called
scale.update_calibration(), so ScaleReader kept initial values
Added set-tare endpoint + API client method, and fixed heartbeat
loop to execute tare, persist the result, and propagate calibration
changes to the ScaleReader instance. Skip calibration sync on the
heartbeat cycle that delivers a tare command, since the response
predates the tare and would overwrite it with stale values.
* Fix SpoolBuddy scale tare & calibration not being applied
The tare and calibrate buttons on the Settings page queued commands
but never executed them due to four broken links:
1. Daemon received tare command via heartbeat but never called
scale.tare() — the ScaleReader was available in shared dict
but unused
2. No API endpoint for the daemon to report the new tare offset
back to the backend DB, so tare results were lost
3. Heartbeat updated config but never called
scale.update_calibration(), so ScaleReader kept initial values
4. The heartbeat response delivering the tare command still had
pre-tare values, immediately overwriting the new offset to zero
Added set-tare endpoint + API client method, and fixed heartbeat
loop to execute tare, persist the result, propagate calibration
changes to the ScaleReader, and skip calibration sync on the
heartbeat cycle that delivers a tare command.
Also replaced the calibration weight input with a touch-friendly
numpad since the RPi kiosk has no physical keyboard.
* Fix SpoolBuddy scale tare & calibration not being applied
The tare and calibrate buttons on the Settings page queued commands
but never executed them due to five broken links:
1. Daemon received tare command but never called scale.tare()
2. No endpoint to persist tare offset back to backend DB
3. Heartbeat never called scale.update_calibration()
4. Heartbeat response with stale values overwrote new tare to zero
5. set-factor used DB tare_offset (stale/zero), producing wrong
calibration factor — empty scale showed ~5000g
Fixed daemon to execute tare, persist result, and propagate
calibration. Calibration step now captures raw ADC at tare time
and sends it with step 2, making factor computation self-contained.
Replaced calibration weight input with compact touch numpad for
the RPi kiosk's 1024x600 touchscreen (no physical keyboard).
* Fix A1 Mini "unknown" status from non-UTF-8 MQTT payload (#549)
Some firmware versions send MQTT payloads with non-UTF-8 bytes.
UnicodeDecodeError was uncaught, silently dropping the entire message
and leaving printer status as "unknown" with 0°C temps and no AMS.
Fall back to decode(errors="replace") to keep JSON parseable.
* Add H2C dual nozzle variant O1C2 model support (#489)
The H2C dual nozzle variant reports model code O1C2 via MQTT, but only
O1C was recognized. This caused the camera to use the wrong protocol
(chamber image on port 6000 instead of RTSP on port 322), producing a
reconnect loop. Added O1C2 to all model ID maps across 8 files.
* Updated commit message (now includes the test fix):
Fix camera button permissions & ffmpeg process leak (#550)
Camera button on printer card was clickable without camera:view
permission. ffmpeg processes (~240MB each) accumulated after closing
camera streams because: (1) stop endpoint called terminate() without
wait()/kill(), (2) HTTP disconnect detection only ran between frames
so was blocked when the generator was stuck on stdout read, and
(3) no mechanism caught processes orphaned by generator abandonment
or app restarts.
- Add camera:view permission check + tooltip to camera button
- Fix stop endpoint: terminate() → wait(2s) → kill() → wait()
- Add background disconnect monitor (polls every 2s, kills ffmpeg
directly on disconnect)
- Add periodic /proc scan (every 60s) that SIGKILLs any ffmpeg
with rtsps://bblp: not in an active stream
- Add noCamera i18n key to all 6 locales
- Fix camera API test mocks for async wait() and pid attribute
* Fix sidebar navigation not respecting user permissions
Sidebar nav items (Archives, Queue, Stats, Profiles, Maintenance,
Projects, Inventory, Files) were visible to all users regardless of
role permissions — only Settings was gated. Now each item is hidden
when the user lacks the corresponding read permission. Printers
remains always visible as the home page.
Also adds missing inventory:read|create|update|delete to the frontend
Permission type (existed in backend but was absent from the frontend
type definition).
* Uodated issue template
* Updated README
* Fix Windows install syntax error from multi-line for /f command (#544)
The Python hash verification in start_bambuddy.bat used a multi-line
`for /f "usebackq"` with a backtick-delimited command split across
lines. Windows CMD cannot parse line breaks inside backtick-delimited
for /f commands, causing "The syntax of the command is incorrect" at
step 1/6. Removed the entire redundant verification block — the
verify_sha256 subroutine already checks the archive against the
pinned hash. The removed block also had a secondary bug: it always
downloaded the amd64 checksum from python.org even on arm64 systems.
* Separate firmware and software sections in Updates settings card
The Updates card on the Settings page mixed printer firmware and
Bambuddy software update toggles with no visual distinction. Now
groups them into labeled sections ("Printer Firmware" at top,
"Bambuddy Software" below) with a divider between them.
* Fix support package: mask subnet IPs, detect host mode, parse top-level fun, add virtual printers
Four support package improvements:
1. Mask first two octets of subnet IPs in support info
(192.168.1.0/24 → x.x.1.0/24) to avoid leaking private network
addresses.
2. Fix Docker network_mode_hint detection. The old heuristic
(interface count > 2) always reported "bridge" on single-NIC
hosts because get_network_interfaces() excludes Docker
interfaces. Now checks for docker0/br-*/veth* visibility via
socket.if_nameindex() — these are only visible in host mode.
3. Parse MQTT "fun" field at top level of payload (not just inside
"print" key). Some firmware versions send it there, which
explains why developer_mode was null for most users.
4. Add virtual_printers section to support info with mode, model,
enabled/running status, and pending file count.
* Fix virtual printer config changes ignored on running instances
sync_from_db() skipped VPs already in self._instances without checking
if their config had changed. Mode, model, access code, bind IP, remote
interface IP, and target printer changes were silently ignored until
manual toggle off/on or full restart. Now detects config drift and
restarts affected instances.
* Fix queue 500 error when cancelled print exists (#558)
The MQTT completion handler stored "aborted" as the queue item status
when a print was cancelled mid-print, but the response schema only
allows "cancelled". Pydantic validation failed on the invalid status
when listing all queue items, returning 500. Filtering by specific
status excluded the bad row so those still worked.
Normalise "aborted" → "cancelled" before storing. A startup fixup
also converts any existing "aborted" rows in the database.
* Redesign SpoolBuddy dashboard: inline spool cards, full-screen AMS assign modal, filament ID normalization
- Replace TagDetectedModal with inline SpoolInfoCard/UnknownTagCard
in dashboard right panel (known spools show assign/sync/close,
unknown tags show add-to-inventory/link/close)
- Rewrite AssignToAmsModal as full-screen overlay reusing AmsUnitCard,
with AMS-HT and external slot support, single assignSpool API call
- Remove printer selector from assign modal (uses top bar selection)
- Extract filament_id <-> setting_id conversion to shared utility
(backend/app/utils/filament_ids.py), used by inventory + cloud routes
- Normalize slicer_filament in assign_spool to derive proper
tray_info_idx and setting_id for MQTT (was sending setting_id="")
- Rename SpoolBuddy top bar status label "Online" -> "Backend"
- Remove weightStable guard from sync weight button
* Added delete tag button to inventory's edit spool modal
* Fix VP bind server rejecting TLS connections on port 3002 (#559)
BambuStudio uses TLS on port 3002 for certain printer models (e.g. A1
Mini / N1). The bind server only spoke plain TCP on both ports, so the
TLS ClientHello was rejected as "invalid frame" and the slicer could
never discover or connect to the virtual printer.
Port 3002 now uses TLS (reusing the VP's existing certificate), port
3000 remains plain TCP. Also updated proxy-mode to use TLSProxy for
the port 3002 bind proxy instead of raw TCPProxy.
* Fix SpoolBuddy scale calibration lost after reboot
_get_mac_id() used Path.iterdir() to find a network interface for the
device ID, but iteration order is non-deterministic. On different boots
it could pick eth0 (MAC …3100) or wlan0 (MAC …3102), producing a
different device_id each time. Since calibration is stored per device ID
in the backend DB, a new ID meant registering as an uncalibrated device.
Sort interfaces alphabetically so the same one is always selected.
* fix(stats): calculate success rate from completed and failed prints only
Previously divided successful prints by total_prints which includes
cancelled/stopped prints, causing an incorrect percentage.
* feat(stats): add new widgets, shared MetricToggle, and timeframe filtering
Add Print Time of Day, Color Distribution, and Records widgets to the
Stats page. Extract shared MetricToggle component for consistent
weight/prints/time toggles. Add date range filtering to archives and
stats API endpoints. Reorganize widgets into parent cards (Printer Stats
and Filament Trends) and fix Dashboard layout persistence for new widgets.
* test(stats): update StatsPage tests to match current widget structure
Enrich mock archives with full fields, fix failure analysis endpoint,
remove outdated Filament Types test, and add coverage for new widgets
(Records, Printer Stats sub-cards, Filament Trends sub-cards).
* refactor(stats): improve Color Distribution card layout and toggle
Use MetricToggle component with new exclude prop instead of inline
buttons, default to weight-first order, and redesign chart layout
with centered donut, total label, and 2-column legend grid.
* feat(stats): add /archives/slim endpoint and fix dashboard bugs
- Add lightweight GET /archives/slim endpoint with column-level SELECT
(13 fields vs 46), skipping duplicate detection for ~70-80% payload
reduction on the stats dashboard
- Add ArchiveSlim Pydantic schema and TypeScript type
- Switch StatsPage and FilamentTrends to use ArchiveSlim
- Fix critical bug in failure_analysis.py: use effective_days for week
count, separate non-date filters, build fresh week_filter per loop
- Fix busiestDay timezone bug: parse YYYY-MM-DD with split() + local
Date constructor instead of new Date() which creates UTC midnight
- Fix success streak ordering: sort by completed_at || created_at
instead of created_at alone
- Add 6 integration tests for /archives/slim endpoint
* feat(stats): add hourly heatmap for short timeframes and fix timezone bugs
Print Activity now shows an hourly heatmap (hours x days) for timeframes
≤7 days and dynamically adjusts calendar months for longer ranges.
Adds hourly granularity to Filament Trends, persists timeframe selection,
fixes optional chaining in QuickStatsWidget, and fixes UTC/local timezone
mismatches in date key generation. Also hardens the /archives/slim limit
param and fixes empty query string handling in API client.
* Fix SpoolBuddy "Assign to AMS" slot showing empty fields in slicer
The assign_spool endpoint sent wrong MQTT field values for user presets,
causing the slicer's AMS slot detail card to show all fields empty.
Two bugs: (1) cloud API was called with the raw slicer_filament value
including its version suffix (e.g. PFUS9ac902733670a9_07), returning 404;
the silent fallback sent setting_id as tray_info_idx instead of the real
filament_id; (2) no SlotPresetMapping was saved after assignment.
Now strips version suffixes before cloud lookup, resolves the real
filament_id via cloud API (with local preset and generic fallbacks),
includes brand in tray_sub_brands, and saves slot preset mapping.
* Add SpoolBuddy backend + frontend test coverage
21 backend integration tests for all 12 SpoolBuddy API endpoints
(device register/re-register/list, heartbeat status/commands/404/
offline broadcast, NFC tag match/unmatch/removal, scale reading/
weight calculation/missing spool, calibration tare/set-tare/
set-factor/zero-delta/get) and 20 frontend component tests for
WeightDisplay, SpoolInfoCard, UnknownTagCard, and TagDetectedModal.
* Fix printer card losing print info when paused (#562)
The printer card only showed progress bar, print name, ETA, layers,
and cover image when gcode_state was RUNNING. A paused print (state
PAUSE) fell through to the idle display, hiding all print context.
Added PAUSE to the display conditions in both compact and expanded
view modes, and replaced the hardcoded "Printing" status label with
getStatusDisplay() so it correctly shows "Paused".
* Fix num_weeks calculation to ensure at least one week
* Updated README
* Add daily beta build publish script
Automates the full beta release workflow: version bump in config.py,
CHANGELOG date update, git commit + tag, multi-arch Docker build+push
to GHCR and Docker Hub, and GitHub prerelease creation with changelog
notes. Supports --parallel, --ghcr-only, --dockerhub-only, and
--skip-release flags. Documents daily beta builds in README and
DOCKERHUB.md.
* Updated README
* Add daily beta build publish script
Builds multi-arch Docker image from the current APP_VERSION in config.py
and pushes to GHCR + Docker Hub, overwriting the same beta tag. Creates
or updates a GitHub prerelease with changelog notes. Users re-pull the
tag or use Watchtower to get daily updates. Supports --parallel,
--ghcr-only, --dockerhub-only, and --skip-release flags. Documents
daily beta builds in README and DOCKERHUB.md.
* Fix SpoolBuddy tag_type for linked spools + add inventory weight check column
SpoolBuddy's "Link to Spool" used the generic updateSpool API which only
set tag_uid, leaving tag_type and data_origin empty. Now uses linkTagToSpool
with tag_type='generic' and data_origin='nfc_link'.
Added a "Weight Check" inventory column (hidden by default) that compares
each spool's last scale measurement against calculated gross weight with
±50g tolerance. Shows green check for match, yellow warning + sync button
for mismatch. Backend stores last_scale_weight and last_weighed_at on each
spool when weight is synced via SpoolBuddy. Includes edge case handling
when scale weight < core weight. i18n keys added for all 6 locales.
* Fix SpoolBuddy AMS page fill levels, ext-R active bug, and layout
- Show inventory-based fill levels for non-BL spools in AMS slots by
fetching spool assignments and computing fill from weight_used/label_weight,
falling back to AMS remain when no assignment exists
- Fix ext-R slot falsely highlighted as active when idle: tray_now=255
(no tray loaded) matched ext-R's id=255 without a guard
- Improve single-slot card layout: use responsive grid aligned with AMS
card columns, fix vertical stretching with few AMS units
- Remove redundant L/R nozzle badges from ext slots (label already shows
Ext-L/Ext-R)
- Add 16 tests for ext active state logic and fill override fallback
* Updated Spoolbuddy install script
* Add on-screen virtual keyboard for SpoolBuddy kiosk UI
The Raspberry Pi kiosk has no physical keyboard and system-level virtual
keyboards (squeekboard, wvkbd) don't auto-show/hide with labwc/Chromium.
Add a react-simple-keyboard QWERTY keyboard that auto-shows on input
focus, with dark theme, shift/caps/backspace, email keys (@, .), and a
two-phase close that prevents ghost-click passthrough to elements below.
Inputs with data-vkb="false" opt out (e.g. SpoolBuddySettingsPage numpad).
* Spoolbuddy frontend fixes
* Display Controls (brightness + blanking)
Root cause: The daemon used wlopm for screen blanking, but wlopm was never installed. Additionally, the daemon runs as the spoolbuddy system user which has no access to
the Wayland socket, so Wayland-based tools can't work.
Fix in display_control.py:
- Replaced wlopm --off/--on with vcgencmd display_power 0/1 — this is a Raspberry Pi firmware-level command that's pre-installed and works without Wayland socket access
- Added shutil.which("vcgencmd") check at init to avoid repeated failures on non-RPi hardware
- Added explicit PermissionError handling for brightness writes with a helpful message about the video group
Fix in install.sh:
- Added video group to the spoolbuddy service user's groups (was: gpio, spi, i2c → now: gpio, spi, i2c, video), which grants access to both vcgencmd and sysfs backlight
files
Scale Tab Numpad
Root cause: On the 1024x600 kiosk screen (~376px available content height), the weight info card + numpad + action buttons exceeded the space, causing tiny buttons and
overlapping.
Fix in SpoolBuddySettingsPage.tsx:
- Hide the weight info card during weight entry step (calStep !== 'weight'), reclaiming ~70px
- Compact inline weight reading in the step header (small dot + monospace text) so users can still see the live scale value
- Larger numpad buttons: min-h-[56px] with text-lg font size (was no min-height, text-sm)
- Added active:scale-95 for tactile touch feedback
- mt-auto on action buttons to push them to the bottom, preventing overlap
- Removed the wrapping card around the calibration flow to save vertical padding
* Spoolbuddy
1. Device tab — repo URL unlinked
Replaced the <a> tag with a <span> so the GitHub URL is displayed as plain text (no clickable link in kiosk mode).
2. Display controls — moved to frontend
Root cause: The daemon runs as a system user without Wayland access, and the kiosk uses an HDMI display (no sysfs backlight). Neither wlopm, vcgencmd, nor sysfs writes
can work in this setup.
Fix — frontend-controlled display in SpoolBuddyLayout.tsx:
- Brightness: CSS filter: brightness(X) applied to the layout root. Immediate visual dimming that works on any display type.
- Screen blanking: Full-screen black overlay (z-[9999]) shown after the configured inactivity timeout. Touch anywhere to wake.
- Activity tracking: Resets on pointerdown/keydown events AND on WebSocket-driven NFC/scale changes (weight update, tag scan).
- Queries device data every 15s to read the current brightness and blank timeout values.
Daemon display_control.py — Simplified:
- Removed vcgencmd/wlopm/subprocess usage entirely
- _blank/_unblank are now state-tracking no-ops (log only)
- DSI backlight brightness via sysfs is preserved as a bonus for DSI displays
- Updated docstring to explain the architecture
3. Scale tab — redesigned with step indicator
Idle state: Same as before — weight card with tare/calibrate buttons.
Calibration wizard: Two-column layout:
- Left column (~64px): Vertical step indicator with numbered circles, checkmark for completed steps, and a connecting line
- Right column: Live weight bar (with stable/settling indicator), step-specific content (instructions or numpad), and action buttons pinned to bottom via mt-auto
The numpad buttons are min-h-[52px] with text-lg — large enough for touch on 1024x600. The weight info card is hidden during the weight entry step to maximize vertical
space.
* Redesign SpoolBuddy settings page, add language/time format support
- Redesign settings page with tabbed layout (Device, Display, Scale, Updates)
- Add screen blank timeout: blanks after touch inactivity, tap to wake
- Add CSS brightness filter for HDMI displays (no sysfs on HDMI)
- Add backend `language` field to app settings for server-side persistence
- Sync UI language from backend on kiosk load (separate Chromium instance)
- Top bar clock respects user's time format setting (system/12h/24h)
- Add SpoolBuddy settings translations for all 6 languages (en/de/fr/ja/it/pt-BR)
- Disable Chromium swipe-to-navigate in kiosk install script
- Add `video` group for DSI backlight access
* Add printer status badges, remove SpoolBuddy inventory page
- Add printer status badges to dashboard left column (green/gray
online/offline dots, compact wrapping pills, overflow-hidden)
- Remove SpoolBuddy inventory page — inventory management belongs
in the main Bambuddy frontend, not the kiosk
- Remove inventory nav item from bottom nav (now 3 tabs)
- Replace "Add to Inventory" navigate with quick-add modal that
creates a basic PLA spool entry via API, with a hint to use
the main Bambuddy UI for full spool details instead
* Add SpoolBuddy NFC tag writing with OpenTag3D format
Write NTAG213/215/216 tags for third-party spools via the SpoolBuddy
kiosk UI. New "Write" page with three workflows: existing spool, new
spool creation, and tag replacement. Backend encodes 133-byte OpenTag3D
NDEF payloads (material, color, brand, weight, temp). Daemon writes
page-by-page via PN5180 NTAG WRITE command with read-back verification.
Write commands flow through heartbeat polling with WebSocket status
updates. Includes 39 new tests and translations for all 6 languages.
* Fix K-profile greenlet error on auto-created RFID spools
create_spool_from_tray() didn't eagerly load the k_profiles
relationship, so auto_assign_spool() triggered a lazy load in async
context when iterating spool.k_profiles. Set k_profiles=[] on new
spools since they can never have K-profiles yet.
* Fix spurious error notifications from print_error status codes
Some firmware sends non-zero print_error values (e.g. 0x03000002 →
0300_0002) during normal printing as status/phase indicators. The
parser treated any non-zero value as a real error, triggering
notifications. All known real errors have codes >= 0x4000 (fatal,
warning, prompt ranges). Now skips print_error values where the
low 16 bits are below 0x4000.
Also fix K-profile greenlet error on auto-created RFID spools by
eagerly setting k_profiles=[] after flush in create_spool_from_tray().
* Updated docker-publish-daily-beta.sh
* Added Simplified Chinese translation zh-CN (Issue #571)
* Add customizable low stock threshold, add low stock filter (#531)
* feat(queue): show spool grams left in filament slot mapping
* Bumped version
* Add SpoolBuddy AMS slot config, external slots, and dashboard redesign
- AMS page: external spool slots (Ext/Ext-L/Ext-R), click-to-configure
modal on all slots, temperature/humidity threshold-colored indicators,
nozzle L/R badges for dual-nozzle printers, compact AMS-HT layout
- Dashboard: two-column layout with device status + printers list (left)
and current spool card (right), state-colored scale/NFC icons, dashed
border card styling
- Daemon: suppress redundant scale reports (±2g threshold + stability
state change detection) to prevent weight display bouncing
- TopBar: auto-select online printers only, SpoolBuddy logo
* Fix SpoolBuddy daemon crash when read_tag module is missing
NFCReader.__init__ imported read_tag and instantiated PN5180() outside
the try/except block, so a missing module crashed the entire daemon.
Moved the import inside the existing try/except so the daemon gracefully
skips NFC polling — matching the scale reader's existing behavior.
* Fix SpoolBuddy daemon failing to import hardware drivers
The daemon imports read_tag and scale_diag as bare modules, but they
live in spoolbuddy/scripts/ which isn't on sys.path when systemd runs
the daemon. Added scripts/ to sys.path at startup, resolved relative
to the module file. Also moved the read_tag import inside NFCReader's
try/except (was crashing the daemon instead of skipping gracefully)
and demoted hardware-not-available messages from ERROR to INFO.
* Increase scale moving average window to reduce weight bouncing
5 samples at 100ms (500ms window) wasn't enough to smooth NAU7802 ADC
noise — the averaged value still varied by >2g between 1s report
intervals, and the stability state kept flipping, triggering a report
every cycle. Increased to 20 samples (2s window) so noise is smoothed
before reaching the reporting layer.
* Remove stability flipping as scale report trigger
When ADC noise kept the spread hovering around the 2g stability
threshold, the stable flag toggled every cycle, forcing a report with
a slightly different weight each time. Now only actual weight changes
of >=2g trigger reports. The stable flag is still included in each
report for consumers that need it.
* Fix formatting of option elements in FilamentMapping
* Make low stock threshold editable
* Add new filter for low spools
* Update bug report template to require additional fields
* Added toast for invalid imputs with locales, updated inputb field restrictions
* Minor Spoolbuddy frontend improvements
* Updated test_backend.sh
* Updated Spoolbuddy install script to strip down Raspbian
* Updated Spoolbuddy install script
* Add API key auth support to /auth/me for SpoolBuddy kiosk
When Bambuddy auth is enabled, the SpoolBuddy kiosk gets redirected to
the login page because ProtectedRoute requires a user from GET /auth/me,
which only handled JWT tokens. The kiosk daemon already has an API key
but couldn't use it to satisfy the frontend auth check.
- Backend: /auth/me now accepts API keys (Bearer bb_xxx or X-API-Key)
and returns a synthetic admin UserResponse with all permissions
- Frontend: AuthContext reads ?token= from URL on first load, stores in
localStorage, and strips from URL (prevents history/referrer leakage)
- Install script: kiosk URL now includes ?token=${API_KEY}
- Tests: 3 new integration tests (Bearer API key, X-API-Key header,
invalid key rejection)
* SpoolBuddy touch-friendly UI overhaul for 1024x600 kiosk display
Enlarge all interactive elements across 9 SpoolBuddy components to meet
44px minimum tap targets on the RPi touchscreen. Increase nav icons
(20→24px), labels (10→12px), bar heights, section headers, printer
buttons, spool visualizations, fill bars, and status indicators.
Compact the dashboard stats bar and remove the printers card. Add
fullScreen prop to ConfigureAmsSlotModal with two-column layout
(filament list left, K-profile + color right) to eliminate scrolling.
* Minor changes, CSS fixes
* Refactor usageFilter state to remove 'lowstock' option for clarity
* Move var saving to API, add test coverage
* fix: threshold validation and cleanup
* Change test input from '150' to '0'
---------
Co-authored-by: tridev <c.tripod@gmx.ch>
Co-authored-by: MartinNYHC <mz@v8w.de>
* Add i18n keys for printer card drag-drop print overlay
PR #569 introduces drag-drop printing on printer cards with
inline fallback strings for common.uploading, common.uploadFailed,
printers.dropToPrint, and printers.cannotPrint. Add these keys
to all 7 locale files so they render in the correct language.
* [Feature]: Printer Page - Add a print button & Drop zone on the printer card (#569)
* Add printer card print flow with drag-drop and reusable LibraryUploadModal
Extract inline upload modal from FileManagerPage into a reusable
LibraryUploadModal component. Add a Print button and drag-drop zone
to printer cards that upload files to the library and open PrintModal
with the printer pre-selected. Only .gcode/.gcode.3mf files are
accepted for printing. PrintModal hides printer selector when a
printer is provided via initialSelectedPrinterIds prop.
* Add printer compatibility check for drag-drop and upload-to-print flows
Validates sliced_for_model from file metadata against the target printer model
before opening the print modal, preventing users from printing with incompatible files.
* Improve FileUploadModal: auto-close on success, inline errors, file validation, and i18n
- Close modal automatically after successful upload instead of showing summary
- Show printer compatibility errors inline in the modal instead of closing
- Add validateFile and accept props to restrict file types for print flow
- Add onFileUploaded error return to prevent modal close on incompatible files
- Internationalize all hardcoded error/warning strings across 6 locales
* Clean up incompatible files from library and fix print button i18n
- Delete uploaded file from library when printer compatibility check fails
in both drag-drop and modal upload flows
- Fix print button tooltip to use existing common.print i18n key
- Fix accept attribute to use .gcode,.3mf for proper browser support
* Add printer information modal accessible from card 3-dot menu
Replace inline IP/serial display at bottom of printer card with a
dedicated "Printer Information" modal opened via the card menu. The
modal shows model, status, state, IP address (copyable), serial number
(copyable), WiFi signal, firmware, developer mode, nozzle count, SD
card, auto-archive, total print hours, location, and added date, along
with the printer image. Includes full i18n support across all 6 locales
and accessibility attributes (role="dialog", aria-modal).
* Extract getPrinterImage and getWifiStrength into shared printer utils
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
* Post work PR #569
* Fix AMS slot modal infinite scroll loop on Windows
Inline callback refs on preset buttons called scrollIntoView on every
re-render, creating a scroll → re-render → scrollIntoView loop on
Windows. Replace with a useEffect + data attribute approach that only
scrolls when the selected preset actually changes.
* Add energy cost to archive card (#573)
* Add energy cost to archive card
* Replace Disc3 icon with Coins in ArchivesPage
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
* Revert "Merge pull request #578 from aneopsy/fix-ams-slot"
This reverts commit d4aa77f502, reversing
changes made to 82178f8abd.
* Reverted commit d4aa77f502
* Remove obsolete slicer_binary_path setting from database
The slicer_binary_path key was left in the settings table from earlier
slicer integration research but is no longer referenced anywhere in the
codebase. Add a startup migration step that deletes orphaned settings
keys so they don't persist in backups.
* Add Hungarian Forint (HUF) currency for filament cost tracking
Closes#579 — adds HUF with symbol "Ft" to the supported currencies
list so Hungarian users can track filament costs in their local currency.
* Fix AMS slot showing wrong material for "Support for" profiles
Profiles like "PLA Support for PETG PETG Basic @Bambu Lab H2D" have
filament_type PETG, but both the frontend and backend name parsers
found "PLA" first (iterating material types in order). The MQTT command
sent tray_type=PLA and tray_info_idx=GFL99 (PLA generic), so the
slicer displayed PLA instead of PETG.
- Frontend parsePresetName(): detect "X Support for Y" pattern, extract
material after "Support for"
- Frontend ConfigureAmsSlotModal: prefer corrected parsed material over
stored localPreset.filament_type for tray_type, tray_info_idx, and
temperature fallback
- Backend _parse_material_from_name(): same "Support for" handling for
future profile imports
- Backend assign_spool: prioritize spool.material over lp.filament_type
for generic filament ID lookup
* Improve FTP upload progress and widen print modal
FTP upload: reduce chunk size from 1MB to 64KB for smooth progress bar
updates (~1s intervals instead of 20+ second gaps). Skip voidresp() for
all printer models — H2D delays the 226 response by 30+ seconds after
data transfer, causing a hang at 100%. Add transfer speed and TLS
handshake timing to logs for diagnosing slow connections.
Print/Schedule modal: widen from max-w-lg (512px) to max-w-2xl (672px)
to accommodate long filament profile names like "PLA Support for PETG
PETG Basic @Bambu Lab H2D 0.4 nozzle".
* Fix archive card showing "Source" badge for sliced .3mf files
The isSlicedFile() check only matched .gcode or .gcode.3mf extensions,
so archives from .3mf prints (the standard Bambu slicer output) showed
a "SOURCE" badge instead of "GCODE". Since .3mf can be either sliced or
a raw CAD export, now checks the archive's total_layers and
print_time_seconds metadata to distinguish them. Also passes the
original filename when creating archives from file manager prints.
* Refactor date and currency utility functions
- Extract shared detectSystemDateFormat() helper to eliminate
duplicated system locale detection in date.ts
- Derive SUPPORTED_CURRENCIES from CURRENCY_SYMBOLS map instead
of maintaining a duplicate hardcoded list
- Consolidate redundant time-parsing regex paths into one
- Use applyTimeFormat() consistently in formatETA()
- Add exhaustive switch default for type safety
* Consolidate duplicate utility functions into shared modules
Extract repeated helper functions from components into shared utils
(colors.ts, date.ts, file.ts) to reduce duplication:
- isLightColor, parseFilamentColor, hexToColorName → utils/colors.ts
- formatMediaTime, formatDurationFromHours → utils/date.ts
- formatFileSize guard hardened for NaN/negative → utils/file.ts
- formatBytes (ToastContext), formatTime (Timelapse*) deduplicated
Functions with subtly different behavior are intentionally kept local
(formatFilament, formatStorageSize, formatBytes, formatUptime,
formatDateTime, formatDate, formatTimeAgo) to preserve exact UI output.
* Fix spurious 0300_0002 error notification via HMS array path (#583)
The previous fix only filtered status codes (< 0x4000) from the
print_error field. Firmware can also send the same false positive
through the hms array in MQTT, which had no such filter. Apply the
same < 0x4000 check to the HMS parser so status/phase indicators
are skipped regardless of which MQTT field carries them.
* Add SSDP model codes to firmware check mapping (#584)
The firmware check only mapped display names (e.g., "H2D Pro") to
API keys but not raw SSDP device codes (e.g., "O1E", "O2D"). If a
printer's model was stored as the raw SSDP code, the firmware check
either failed or matched the wrong model — H2D Pro matched against
H2D firmware, showing a false update-available badge.
Add all known SSDP device codes to MODEL_TO_API_KEY so firmware
versions resolve correctly regardless of how the model was stored.
* Show ethernet indicator instead of WiFi signal for wired printers (#585)
Parse home_flag bit 18 (0x00040000) from MQTT to detect ethernet
connections. When set, the printer card shows a green "Ethernet"
badge with a cable icon instead of WiFi signal strength in dBm.
The printer info modal also displays "Ethernet" instead of WiFi
signal details.
* Post work PR #581
* Add in-app bug reporting with relay, debug log collection, and privacy controls
Floating bug report button submits issues via bambuddy.cool relay (no GitHub
token needed locally). Collects 30s debug logs with printer push_all, sanitizes
all sensitive data, uploads logs as files to GitHub. Screenshot upload/paste/drag
with JPEG compression. Translated into all 7 languages. Includes 21 tests.
* [Fix]: AMS slot modal infinite scroll loop on Windows (#580)
* Fix AMS slot modal not scrolling to preselected filament
The scroll useEffect fired before the loading spinner was replaced
by the preset list, so the DOM element didn't exist yet. The ref
guard was then set, preventing any retry once buttons appeared.
- Move isLoading computation before the scroll effect and add it
as a dependency so the effect re-runs when loading completes
- Gate scroll on !isLoading so it only runs when buttons exist
- Only mark scrolledToRef after the element is actually found
- Use requestAnimationFrame to scroll after browser layout
- Use block:'center' so the selected item is clearly visible
Preselect filament for printer-configured AMS slots
When an AMS slot was configured directly on the printer (no
savedPresetId), the modal didn't preselect the filament even though
it was in the list. Add a third fallback that matches trayInfoIdx
against the full filteredPresets list (cloud and builtin sources).
* Restore scrolledToRef lost during merge
The useRef import, scrolledToRef declaration, and its reset were
dropped during the 0.2.2b1 merge, causing a ReferenceError in the
scroll-to-preselected-filament effect.
* Fix preset scroll loop and wire up useEffect scroll logic
- Remove inline ref callbacks with scrollIntoView on both preset
button lists (fullscreen + standard) to stop the infinite scroll
loop on Windows
- Add data-preset-id attribute so the existing useEffect/querySelector
scroll logic can actually find the elements
- Replace filteredPresets dependency with builtinFilaments in the
selection useEffect to prevent search keystrokes from overriding
manual preset selection
* Adjust scroll behavior in ConfigureAmsSlotModal
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
* Housekeeping
---------
Co-authored-by: tridev <c.tripod@gmx.ch>
Co-authored-by: AneoPsy <paultevatheis@gmail.com>
Co-authored-by: Keybored <78739882+Keybored02@users.noreply.github.com>
Fix camera button permissions & ffmpeg process leak (#550)
Camera button on printer card was clickable without camera:view
permission. ffmpeg processes (~240MB each) accumulated after closing
camera streams because: (1) stop endpoint called terminate() without
wait()/kill(), (2) HTTP disconnect detection only ran between frames
so was blocked when the generator was stuck on stdout read, and
(3) no mechanism caught processes orphaned by generator abandonment
or app restarts.
- Add camera:view permission check + tooltip to camera button
- Fix stop endpoint: terminate() → wait(2s) → kill() → wait()
- Add background disconnect monitor (polls every 2s, kills ffmpeg
directly on disconnect)
- Add periodic /proc scan (every 60s) that SIGKILLs any ffmpeg
with rtsps://bblp: not in an active stream
- Add noCamera i18n key to all 6 locales
- Fix camera API test mocks for async wait() and pid attribute
The H2C dual nozzle variant reports model code O1C2 via MQTT, but only
O1C was recognized. This caused the camera to use the wrong protocol
(chamber image on port 6000 instead of RTSP on port 322), producing a
reconnect loop. Added O1C2 to all model ID maps across 8 files.
Some firmware versions send MQTT payloads with non-UTF-8 bytes.
UnicodeDecodeError was uncaught, silently dropping the entire message
and leaving printer status as "unknown" with 0°C temps and no AMS.
Fall back to decode(errors="replace") to keep JSON parseable.
The SQLite WAL was never checkpointed during container shutdown, leaving
uncommitted data (including schema migrations) in the -wal file. On
restart, partial WAL recovery could cause inconsistent query results,
making the queue appear empty until a filter was applied. Add
PRAGMA wal_checkpoint(TRUNCATE) and engine.dispose() to the lifespan
shutdown handler.
The print scheduler had two code paths for queue items: model-based
(target_model set) and printer-specific (printer_id set). Only the
model-based path computed ams_mapping before starting the print. VP
queue items assigned to a specific printer went through the
printer-specific path with null ams_mapping, causing the printer to
default to the first AMS slot regardless of what the 3MF required.
Add _compute_ams_mapping_for_printer() call to the printer-specific
path, matching the existing model-based behavior.
When a virtual printer auto-queued a file, PrintQueueItem was created
without plate_id. The scheduler defaulted to plate_id=1, generating
MQTT path "Metadata/plate_1.gcode". For multi-plate 3MF files sliced
on a different plate, the printer couldn't find the gcode and returned
HMS error 0500_4003. Extract plate index from the 3MF's slice_info.config
before creating the queue item.
When scheduling a print to "Any {model}", a redundant "Target Model"
dropdown appeared even though the G-code is already sliced for a
specific printer model. Changing it would lead to print failures.
Hide the dropdown when slicedForModel is known — the tab label already
communicates the target. The dropdown still appears as a fallback for
legacy files without model metadata.
Add weight_locked flag to spools that auto-sets when weight_used is
explicitly updated via the API. Both the MQTT AMS remain% auto-sync and
the manual force-sync endpoint skip locked spools. Usage tracker delta
tracking is unaffected. Users can re-enable AMS sync by setting
weight_locked to false.
Queue endpoints now return filament_type, filament_color, layer_height,
nozzle_diameter, and sliced_for_model from the archive or library file.
Previously this data was only available via the archive API.
Virtual printer "print_queue" mode created queue items with no printer
assignment. Now sets target_model from the VP's SSDP model code (e.g.
P1S, X1C) for "Any Printer" scheduling, or uses target_printer_id if
configured.
Settings page auto-save onSuccess overwrote localSettings with the
server response, discarding characters typed during the save request.
Removed the stale state overwrite so in-progress input is preserved.
When scheduling a print to "any printer" with a filament color override,
the scheduler picked a printer with the correct filament type but wrong
color. _find_idle_printer_for_model() used color matching only for
ranking candidates, not filtering — a printer with 0 color matches was
still selected if it had the right types.
Now requires at least 1 color match when filament overrides specify
colors. Printers with 0 matches are skipped and reported in the
"waiting for filament" reason instead of being treated as candidates.
Three independent code paths wrote to archive.cost with conflicting
strategies, causing the same model to produce different prices on each
reprint (e.g. £0.77, £1.54, £2.03).
- Remove add_reprint_cost (Path 3) — redundant cost accumulation that
double-counted on top of usage tracker
- Fix usage tracker (Path 2) — compute cost from current session's
results only, not a SUM of all historical SpoolUsageHistory rows
- Remove _reprint_archives tracking set from main.py
- Update test mocks to match simplified query pattern
archive.cost now always reflects the cost of a single print.
All backend timestamps used datetime.now() (server local time) or the
deprecated datetime.utcnow(). The frontend's parseUTCDate() assumes
timestamps without timezone indicators are UTC and appends 'Z', so
stored timestamps were off by the timezone offset when the container's
timezone wasn't UTC.
Backend: replaced datetime.now() and datetime.utcnow() with
datetime.now(timezone.utc) across 16 files (~80 call sites) for all
database fields and DB comparisons. Cosmetic timestamps (filenames,
user-facing local time formatting) intentionally left as local time.
Frontend: replaced 13 new Date(backendTimestamp) calls with
parseUTCDate() across 8 files to correctly interpret UTC timestamps.
The bed cooldown monitor was defined at the end of on_print_complete,
after an early return that exits when no archive is found. Prints
started from BambuStudio or the printer's touchscreen have no archive,
so the function returned before the bed cooldown task was ever created.
Moved the bed cooldown block (function def + task creation) to before
the archive_id early-return so it fires for all completed prints.
Also hardened the temperature dict check from truthiness to isinstance.
External spool assignments (ams_id=255) were silently deleted on every
AMS change because _find_tray_in_ams_data only searches AMS units, not
vt_tray. Now looks up external assignments in the printer's vt_tray data
instead, and preserves assignments when vt_tray hasn't arrived yet.
H2D firmware reports stg_cur=74 during print preparation, which was
not in the STAGE_NAMES lookup table (sourced from BambuStudio, which
only goes up to 66). This caused "Unknown stage (74)" to display on
the printer card. Also adds stage 77 ("Preparing AMS") which exists
in BambuStudio source but was missing from the lookup.
When scheduling a print to "any printer" (model-based assignment),
users can now override the 3MF's original filament choices per slot.
The override dropdown shows compatible filaments loaded across all
printers of the selected model, filtered by type and nozzle (H2D).
The scheduler matches against overridden type/color instead of the
original 3MF values, preferring printers with exact color matches.
Backend:
- New GET /printers/available-filaments endpoint (aggregates loaded
filaments across printers of a model, includes extruder_id for
dual-nozzle nozzle-aware filtering)
- New filament_overrides JSON column on print_queue table
- Scheduler applies overrides before AMS mapping, clears tray_info_idx
on overridden slots so color matching takes priority
- Printer selection prefers printers with most override color matches
Frontend:
- New FilamentOverride component with per-slot override dropdowns
- Type-filtered options (PLA slots only show PLA)
- Nozzle-aware filtering (H2D: only shows filaments on correct extruder)
- Integrated into PrintModal for model-based queue mode
Tests:
- 11 backend unit tests (color match counting, override application)
- 12 frontend tests (rendering, type/nozzle filtering, interactions)
i18n: All 6 locales (en, de, fr, it, ja, pt-BR)
SpoolBuddy turns a Raspberry Pi 4B with a PN5180 NFC reader and
NAU7802 scale into a filament management station that integrates
with Bambuddy via REST API and WebSocket.
Backend: SpoolBuddyDevice model, 10 REST endpoints (/spoolbuddy/*),
6 WebSocket broadcast types, background offline-detection watchdog.
RPi daemon: asyncio service with concurrent NFC polling (300ms,
MIFARE Classic + Bambu HKDF key derivation), scale reading (10 SPS,
5-sample moving average, stability detection), and 10s heartbeat
with exponential backoff reconnect.
Frontend: kiosk-optimized 1024x600 UI at /spoolbuddy with Dashboard
(live weight + NFC spool detection), AMS Overview, Inventory,
Printers, and Settings pages. useSpoolBuddyState reducer hook
driven by WebSocket CustomEvents.
i18n: all 6 locales (en, de, fr, it, ja, pt-BR).
When the 3MF source file wasn't downloaded from the printer (e.g. FTP
failure on P2S), archive.file_path was null. The finish photo capture
silently skipped because it derived the save directory from file_path.
Now falls back to archive/{id}/ directory and logs a warning.
The rename endpoint updated `filename` but not `file_metadata.print_name`,
which the UI uses as the primary display name. Since print_name is extracted
from the 3MF at upload, it always took precedence over the renamed filename.
Now also updates print_name in file metadata when present.
The MQTT "fun" field is an integer in the JSON payload, but the
parser used int(value, 16) which requires a string. This raised
TypeError on every message, silently swallowed by the except clause,
so developer_mode was never set.
Two bugs caused spool assignments to always configure AMS slots with
generic Bambu filament IDs (e.g. GFB99 "Generic ABS") instead of the
spool's actual slicer preset:
1. PFUS* IDs (cloud-synced custom presets) were blanket-rejected and
replaced with generic IDs in both assign_spool and configure_ams_slot
2. Generic fallback IDs (GFB99, GFL99, etc.) were treated as "good"
presets by the slot-reuse logic, making them sticky once set
New priority: spool's own slicer_filament > slot's non-generic preset
(same material) > generic fallback.
Parse the MQTT "fun" field bit 0x20000000 to detect whether connected
printers have Developer LAN Mode enabled. Show a persistent orange
warning banner when any printer lacks it, since newer firmware silently
rejects MQTT write commands without developer mode.
- Parse fun field into developer_mode on PrinterState
- Add /printers/developer-mode-warnings lightweight polling endpoint
- Include developer_mode in printer status API and support bundle
- Orange banner with affected printer names and wiki link
- Translations for all 6 locales (en, de, fr, it, ja, pt-BR)
- 7 backend + 4 frontend tests
When FTP download of a 3MF fails (e.g. BambuStudio-initiated prints),
the fallback archive has file_path="". Path.exists() on
settings.base_dir / "" resolves to the base directory itself and
returns True, so ZipFile() then fails with [Errno 21] Is a directory.
Replace .exists() with .is_file() across all 15 archive route checks
and 1 in main.py. Add file_path truthiness guard for finish photo
capture to prevent saving photos under the base directory.
P2S firmware sends local slot IDs (0-3) in tray_now, not global tray
IDs, when multiple AMS units are connected. The UI highlighted the
wrong AMS unit (e.g., AMS-A instead of AMS-B). Usage tracking was
unaffected because it uses the MQTT mapping field.
Added disambiguation in _handle_ams_data for single-nozzle printers
with ams_exist_bits indicating >1 AMS: cross-references tray_now with
the MQTT mapping field (snow-encoded) to resolve the correct global
tray ID. Falls back to raw value when no mapping is available or
ambiguous. No behavior change for single-AMS printers or dual-nozzle
(H2D) printers.
Add Quick Add mode to the spool form for simplified entry (material +
color + weight only), and a quantity field (1-100) for creating multiple
identical spools at once. Stock spools (no slicer profile) are computed
rather than stored — any spool without slicer_filament shows an amber
"Stock" badge. New filter chips (All/Stock/Configured) on the inventory
page. Backend bulk endpoint creates N spools in one transaction.
Backend:
- SpoolBulkCreate schema with quantity validation (1-100)
- POST /inventory/spools/bulk endpoint
Frontend:
- Quick Add toggle in SpoolFormModal (create mode only)
- Quantity field in FilamentSection (both modes)
- bulkCreateSpools API method and bulkCreateMutation
- Stock column (hidden by default) and stock filter chips
- Inline error rendering moved into FilamentSection
- CellCtx extended with t() for translatable cell content
Tests:
- 13 backend tests (schema validation + endpoint logic)
- 10 frontend tests (validateForm quickAdd + UI behavior)
i18n: 6 locales (en, de, fr, it, ja, pt-BR)
Docs: CHANGELOG, README, website features, wiki inventory
Three bugs allowed uploaded gcode files to survive on the printer's SD
card, causing firmware restarts to auto-start old prints hours later.
1. The post-print cleanup retry loop always broke after attempt 1
regardless of delete success — delete_file_async returns False on
failure instead of raising, so the except-based retry never fired.
2. When start_print() failed after uploading, the file was never cleaned
up since on_print_complete never fires for prints that never started.
3. Cleanup failures were logged at DEBUG level, invisible in production.
When a spool runs empty mid-print and the AMS auto-switches to a backup,
the entire print weight was attributed to the original spool. Track tray
changes during the print via tray_change_log on PrinterState, then split
the 3MF weight across trays using per-layer gcode segment boundaries at
print completion. Falls back to linear layer-ratio splitting when gcode
data is unavailable.
When a print was started from BambuStudio (not Bambuddy), the
auto-archive has an empty file_path. The photo save code uses
base_dir / Path("").parent which resolves correctly, but the
serve/upload/delete endpoints used (base_dir / "").parent which
goes one directory level too high — returning 404 despite the
photo existing on disk.
ntfy servers with attachments disabled reject thumbnail uploads with
"attachments not allowed" (HTTP 400 / code 40014), causing the entire
notification to fail. Now automatically retries without the image so
the notification still gets delivered.
Infrastructure/auth HMS error codes like 0500_0007 (MQTT command
verification failed) triggered false-alarm printer error notifications
even though they don't indicate actual print problems.
- Add suppress list for non-actionable error codes: 0500_0007 (MQTT
auth failure), 0500_4001 (cloud connection failure), 0500_400E
(print cancelled by user)
- Skip suppressed codes in the notification loop so they are still
tracked in HMS state and shown in the UI, but don't fire notifications
The log sanitizer only used regex patterns, missing arbitrary user-chosen
strings (printer names, usernames). Tasmota smart plug credentials were
logged verbatim in URLs by httpx.
- Make _sanitize_log_content() database-aware: query Printer names/serials,
User usernames, and Bambu Cloud email for exact-string replacement
(longest-first, skip <3 chars to prevent over-redaction)
- Fix serial regex leaking first 3 chars (remove capture group partial
redaction), add case-insensitive flag
- Move Tasmota credentials from URL-embedded (http://user:pass@host) to
httpx auth= parameter so they never appear in logs
- Add URL credentials regex as defense-in-depth for user:pass@ in logs
- Add 'username' and 'path' to settings sensitive_keys filter (catches
smtp_username, slicer_binary_path in support-info.json)
When sending notifications with image attachments (progress/error
events), the message body was placed in an HTTP Message header. Messages
containing newlines (e.g. "Printer: file.stl\nRemaining: 4h 52m") were
rejected by httpx since HTTP headers cannot contain newline characters.
Escape newlines to literal \n which ntfy renders as line breaks.
* Adding the energy cost from 2 to 3 decimal precision
* Complying with pr
* Complying with PR
* Complying with PR
* Fix energy cost display precision in ProjectDetailPage
* Change energy cost formatting to two decimal places
* Change decimal precision for energy cost display
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
MartinNYHC