1531 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
MartinNYHC	b3a91d7314	Revert "v0.2.2b1 (#602)" (#603) ... This reverts commit 3dd1ffb485. v0.2.2-b2 v0.2.2b3	2026-03-04 14:26:54 +01:00
4 people	3dd1ffb485	v0.2.2b1 (#602) ... * feat(queue): show spool grams left in filament slot mapping * Bumped version * Add SpoolBuddy AMS slot config, external slots, and dashboard redesign - AMS page: external spool slots (Ext/Ext-L/Ext-R), click-to-configure modal on all slots, temperature/humidity threshold-colored indicators, nozzle L/R badges for dual-nozzle printers, compact AMS-HT layout - Dashboard: two-column layout with device status + printers list (left) and current spool card (right), state-colored scale/NFC icons, dashed border card styling - Daemon: suppress redundant scale reports (±2g threshold + stability state change detection) to prevent weight display bouncing - TopBar: auto-select online printers only, SpoolBuddy logo * Fix SpoolBuddy daemon crash when read_tag module is missing NFCReader.__init__ imported read_tag and instantiated PN5180() outside the try/except block, so a missing module crashed the entire daemon. Moved the import inside the existing try/except so the daemon gracefully skips NFC polling — matching the scale reader's existing behavior. * Fix SpoolBuddy daemon failing to import hardware drivers The daemon imports read_tag and scale_diag as bare modules, but they live in spoolbuddy/scripts/ which isn't on sys.path when systemd runs the daemon. Added scripts/ to sys.path at startup, resolved relative to the module file. Also moved the read_tag import inside NFCReader's try/except (was crashing the daemon instead of skipping gracefully) and demoted hardware-not-available messages from ERROR to INFO. * Increase scale moving average window to reduce weight bouncing 5 samples at 100ms (500ms window) wasn't enough to smooth NAU7802 ADC noise — the averaged value still varied by >2g between 1s report intervals, and the stability state kept flipping, triggering a report every cycle. Increased to 20 samples (2s window) so noise is smoothed before reaching the reporting layer. * Remove stability flipping as scale report trigger When ADC noise kept the spread hovering around the 2g stability threshold, the stable flag toggled every cycle, forcing a report with a slightly different weight each time. Now only actual weight changes of >=2g trigger reports. The stable flag is still included in each report for consumers that need it. * Fix formatting of option elements in FilamentMapping * Minor Spoolbuddy frontend improvements * Updated Spoolbuddy install script to strip down Raspbian * Updated Spoolbuddy install script * Add API key auth support to /auth/me for SpoolBuddy kiosk When Bambuddy auth is enabled, the SpoolBuddy kiosk gets redirected to the login page because ProtectedRoute requires a user from GET /auth/me, which only handled JWT tokens. The kiosk daemon already has an API key but couldn't use it to satisfy the frontend auth check. - Backend: /auth/me now accepts API keys (Bearer bb_xxx or X-API-Key) and returns a synthetic admin UserResponse with all permissions - Frontend: AuthContext reads ?token= from URL on first load, stores in localStorage, and strips from URL (prevents history/referrer leakage) - Install script: kiosk URL now includes ?token=${API_KEY} - Tests: 3 new integration tests (Bearer API key, X-API-Key header, invalid key rejection) * SpoolBuddy touch-friendly UI overhaul for 1024x600 kiosk display Enlarge all interactive elements across 9 SpoolBuddy components to meet 44px minimum tap targets on the RPi touchscreen. Increase nav icons (20→24px), labels (10→12px), bar heights, section headers, printer buttons, spool visualizations, fill bars, and status indicators. Compact the dashboard stats bar and remove the printers card. Add fullScreen prop to ConfigureAmsSlotModal with two-column layout (filament list left, K-profile + color right) to eliminate scrolling. * Updated CI * Fix naive-vs-aware datetime crash from 0.2.1 timezone migration The timezone fix (ed36eaf) replaced datetime.utcnow() with datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's SQLite DateTime columns strip tzinfo on read, returning naive datetimes. Any Python-side comparison (subtraction, <, >) between an aware "now" and a naive DB value raises TypeError. Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)` guards at all 8 affected comparison sites: - maintenance.py: last_performed_at subtraction (500 on /maintenance/overview) - auth.py: API key expires_at check (2 locations) - print_scheduler.py: scheduled_time comparison - smart_plug_manager.py: auto_off_pending_since elapsed calc - smart_plugs.py: power_alert_last_triggered cooldown - main.py: last_runtime_update elapsed calc - archives.py: timelapse completed_at fallback * Fix naive-vs-aware datetime crash from 0.2.1 timezone migration The timezone fix (ed36eaf) replaced datetime.utcnow() with datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's SQLite DateTime columns strip tzinfo on read, returning naive datetimes. Any Python-side comparison (subtraction, <, >) between an aware "now" and a naive DB value raises TypeError. Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)` guards at all 9 affected comparison sites: - maintenance.py: last_performed_at subtraction (2 code paths — days-based and hours-based intervals both crashed on /maintenance/overview) - auth.py: API key expires_at check (2 locations) - print_scheduler.py: scheduled_time comparison - smart_plug_manager.py: auto_off_pending_since elapsed calc - smart_plugs.py: power_alert_last_triggered cooldown - main.py: last_runtime_update elapsed calc - archives.py: timelapse completed_at fallback * Fix queue badge showing on printers without matching filament (#486) The purple queue counter badge in the printer card header used the raw unfiltered queue item count, so it appeared on ALL printers of the same model when a job was scheduled for "any [model]" — even printers without the matching filament color. The PrinterQueueWidget below it (which shows "Clear Plate & Start") already filtered by filament type + color. Apply the same filament compatibility filter (type check + color override check) to the badge count so it only shows on printers that can actually run the queued jobs. * Fix Windows install syntax error from LF line endings (#544) The start_bambuddy.bat launcher had Unix (LF) line endings. When a user's git is configured with core.autocrlf=false or input, the file is checked out with LF endings and cmd.exe fails with "the syntax of the command is incorrect" before reaching the hash check. Add .gitattributes forcing CRLF for *.bat files so they always get correct line endings on checkout regardless of git config. * Add SpoolBuddy tag detection modal and fix NFC reader silent failure Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen TagDetectedModal that auto-opens on NFC tag detection. Known spools show remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer "Add to Inventory" and "Link to Spool". Modal stays open on tag removal, won't re-open for dismissed tags, reopens on re-place after removal. Daemon: Fix PN5180 NFC reader silently stopping tag detection when the reader drifts into a stuck state. Add auto-recovery (full hardware reset after 10 consecutive errors), preventive RF cycling every 60s when idle, and periodic status logging. Heartbeat now reports actual nfc_ok/scale_ok from reader instances instead of hardcoded True. * Add SpoolBuddy tag detection modal and fix NFC reader silent failure Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen TagDetectedModal that auto-opens on NFC tag detection. Known spools show remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer "Add to Inventory" and "Link to Spool". Modal stays open on tag removal, won't re-open for dismissed tags, reopens on re-place after removal. Daemon: Fix PN5180 NFC reader silently stopping tag detection. The reader drifts into a stuck state where activate_type_a() returns None without raising exceptions, making error-based recovery useless. Changed the preventive idle maintenance from a lightweight RF off/on cycle to a full hardware reset (RST pin toggle + RF re-init) every 60s — the same reset that a service restart performs. Also added error-based auto-recovery after 10 consecutive exceptions, promoted poll errors to WARNING, added periodic status logging, and fixed heartbeat to report actual nfc_ok/ scale_ok instead of hardcoded True. * Add SpoolBuddy tag detection modal and fix NFC reader polling Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen TagDetectedModal that auto-opens on NFC tag detection. Known spools show remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer "Add to Inventory" and "Link to Spool". Modal stays open on tag removal, won't re-open for dismissed tags, reopens on re-place after removal. Daemon: Fix PN5180 NFC reader failing to maintain tag detection. After a successful SELECT the card stays in ACTIVE state and ignores subsequent WUPA/REQA, causing immediate false "tag removed" events. Added a brief RF off/on cycle (13ms) before each poll to force cards back to IDLE state. Also added a preventive full hardware reset every 60s when idle to recover from deeper stuck states where activate_type_a() silently returns None without exceptions. Heartbeat now reports actual nfc_ok/ scale_ok instead of hardcoded True. * Add SpoolBuddy tag detection modal and fix NFC reader polling Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen TagDetectedModal that auto-opens on NFC tag detection. Known spools show remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer "Add to Inventory" and "Link to Spool". Modal stays open on tag removal, won't re-open for dismissed tags, reopens on re-place after removal. Daemon: Fix PN5180 NFC reader failing to maintain tag detection. After a successful SELECT the card stays in ACTIVE state and ignores subsequent WUPA/REQA. Added a conditional RF off/on cycle (13ms) before each poll, but only when a tag is present — resets card from ACTIVE to IDLE for re-selection. The cycle is skipped when idle to avoid degrading reader state with continuous RF toggling, which prevented new tags from being detected after removal. Also added a preventive full hardware reset every 60s when idle to recover from deeper stuck states, error-based recovery after 10 consecutive exceptions, and accurate heartbeat reporting of NFC/scale health. * Add SpoolBuddy tag detection modal and fix NFC reader polling Frontend: Replace inline SpoolInfoCard/UnknownTagCard with full-screen TagDetectedModal that auto-opens on NFC tag detection. Known spools show remaining weight, fill bar, and offer "Assign to AMS" (new sub-modal with printer selector + AMS slot grid) and "Sync Weight". Unknown tags offer "Add to Inventory" and "Link to Spool". Modal stays open on tag removal, won't re-open for dismissed tags, reopens on re-place after removal. Daemon: Fix PN5180 NFC reader failing to detect tags. Each activate_type_a() call returning None corrupts the PN5180 transceive state, silently preventing all subsequent tag detection. Fixed by performing a full hardware reset (RST pin toggle + RF re-init) before every idle poll (~240ms, ~1.8 Hz rate). When a tag is present, a light RF off/on cycle (13ms) resets the card from ACTIVE to IDLE state for continuous re-selection. Also added error-based recovery, periodic status logging, and accurate heartbeat NFC/scale health reporting. * Fix SpoolBuddy scale tare & calibration not being applied The tare and calibrate buttons on the Settings page queued commands but never executed them due to three broken links: 1. Daemon received tare command via heartbeat but never called scale.tare() — the ScaleReader was available in shared dict but unused 2. No API endpoint for the daemon to report the new tare offset back to the backend DB, so tare results were lost 3. Heartbeat updated config but never called scale.update_calibration(), so ScaleReader kept initial values Added set-tare endpoint + API client method, and fixed heartbeat loop to execute tare, persist the result, and propagate calibration changes to the ScaleReader instance. * Fix SpoolBuddy scale tare & calibration not being applied The tare and calibrate buttons on the Settings page queued commands but never executed them due to three broken links: 1. Daemon received tare command via heartbeat but never called scale.tare() — the ScaleReader was available in shared dict but unused 2. No API endpoint for the daemon to report the new tare offset back to the backend DB, so tare results were lost 3. Heartbeat updated config but never called scale.update_calibration(), so ScaleReader kept initial values Added set-tare endpoint + API client method, and fixed heartbeat loop to execute tare, persist the result, and propagate calibration changes to the ScaleReader instance. Skip calibration sync on the heartbeat cycle that delivers a tare command, since the response predates the tare and would overwrite it with stale values. * Fix SpoolBuddy scale tare & calibration not being applied The tare and calibrate buttons on the Settings page queued commands but never executed them due to four broken links: 1. Daemon received tare command via heartbeat but never called scale.tare() — the ScaleReader was available in shared dict but unused 2. No API endpoint for the daemon to report the new tare offset back to the backend DB, so tare results were lost 3. Heartbeat updated config but never called scale.update_calibration(), so ScaleReader kept initial values 4. The heartbeat response delivering the tare command still had pre-tare values, immediately overwriting the new offset to zero Added set-tare endpoint + API client method, and fixed heartbeat loop to execute tare, persist the result, propagate calibration changes to the ScaleReader, and skip calibration sync on the heartbeat cycle that delivers a tare command. Also replaced the calibration weight input with a touch-friendly numpad since the RPi kiosk has no physical keyboard. * Fix SpoolBuddy scale tare & calibration not being applied The tare and calibrate buttons on the Settings page queued commands but never executed them due to five broken links: 1. Daemon received tare command but never called scale.tare() 2. No endpoint to persist tare offset back to backend DB 3. Heartbeat never called scale.update_calibration() 4. Heartbeat response with stale values overwrote new tare to zero 5. set-factor used DB tare_offset (stale/zero), producing wrong calibration factor — empty scale showed ~5000g Fixed daemon to execute tare, persist result, and propagate calibration. Calibration step now captures raw ADC at tare time and sends it with step 2, making factor computation self-contained. Replaced calibration weight input with compact touch numpad for the RPi kiosk's 1024x600 touchscreen (no physical keyboard). * Fix A1 Mini "unknown" status from non-UTF-8 MQTT payload (#549) Some firmware versions send MQTT payloads with non-UTF-8 bytes. UnicodeDecodeError was uncaught, silently dropping the entire message and leaving printer status as "unknown" with 0°C temps and no AMS. Fall back to decode(errors="replace") to keep JSON parseable. * Add H2C dual nozzle variant O1C2 model support (#489) The H2C dual nozzle variant reports model code O1C2 via MQTT, but only O1C was recognized. This caused the camera to use the wrong protocol (chamber image on port 6000 instead of RTSP on port 322), producing a reconnect loop. Added O1C2 to all model ID maps across 8 files. * Updated commit message (now includes the test fix): Fix camera button permissions & ffmpeg process leak (#550) Camera button on printer card was clickable without camera:view permission. ffmpeg processes (~240MB each) accumulated after closing camera streams because: (1) stop endpoint called terminate() without wait()/kill(), (2) HTTP disconnect detection only ran between frames so was blocked when the generator was stuck on stdout read, and (3) no mechanism caught processes orphaned by generator abandonment or app restarts. - Add camera:view permission check + tooltip to camera button - Fix stop endpoint: terminate() → wait(2s) → kill() → wait() - Add background disconnect monitor (polls every 2s, kills ffmpeg directly on disconnect) - Add periodic /proc scan (every 60s) that SIGKILLs any ffmpeg with rtsps://bblp: not in an active stream - Add noCamera i18n key to all 6 locales - Fix camera API test mocks for async wait() and pid attribute * Fix sidebar navigation not respecting user permissions Sidebar nav items (Archives, Queue, Stats, Profiles, Maintenance, Projects, Inventory, Files) were visible to all users regardless of role permissions — only Settings was gated. Now each item is hidden when the user lacks the corresponding read permission. Printers remains always visible as the home page. Also adds missing inventory:read|create|update|delete to the frontend Permission type (existed in backend but was absent from the frontend type definition). * Uodated issue template * Updated README * Fix Windows install syntax error from multi-line for /f command (#544) The Python hash verification in start_bambuddy.bat used a multi-line `for /f "usebackq"` with a backtick-delimited command split across lines. Windows CMD cannot parse line breaks inside backtick-delimited for /f commands, causing "The syntax of the command is incorrect" at step 1/6. Removed the entire redundant verification block — the verify_sha256 subroutine already checks the archive against the pinned hash. The removed block also had a secondary bug: it always downloaded the amd64 checksum from python.org even on arm64 systems. * Separate firmware and software sections in Updates settings card The Updates card on the Settings page mixed printer firmware and Bambuddy software update toggles with no visual distinction. Now groups them into labeled sections ("Printer Firmware" at top, "Bambuddy Software" below) with a divider between them. * Fix support package: mask subnet IPs, detect host mode, parse top-level fun, add virtual printers Four support package improvements: 1. Mask first two octets of subnet IPs in support info (192.168.1.0/24 → x.x.1.0/24) to avoid leaking private network addresses. 2. Fix Docker network_mode_hint detection. The old heuristic (interface count > 2) always reported "bridge" on single-NIC hosts because get_network_interfaces() excludes Docker interfaces. Now checks for docker0/br-*/veth* visibility via socket.if_nameindex() — these are only visible in host mode. 3. Parse MQTT "fun" field at top level of payload (not just inside "print" key). Some firmware versions send it there, which explains why developer_mode was null for most users. 4. Add virtual_printers section to support info with mode, model, enabled/running status, and pending file count. * Fix virtual printer config changes ignored on running instances sync_from_db() skipped VPs already in self._instances without checking if their config had changed. Mode, model, access code, bind IP, remote interface IP, and target printer changes were silently ignored until manual toggle off/on or full restart. Now detects config drift and restarts affected instances. * Fix queue 500 error when cancelled print exists (#558) The MQTT completion handler stored "aborted" as the queue item status when a print was cancelled mid-print, but the response schema only allows "cancelled". Pydantic validation failed on the invalid status when listing all queue items, returning 500. Filtering by specific status excluded the bad row so those still worked. Normalise "aborted" → "cancelled" before storing. A startup fixup also converts any existing "aborted" rows in the database. * Redesign SpoolBuddy dashboard: inline spool cards, full-screen AMS assign modal, filament ID normalization - Replace TagDetectedModal with inline SpoolInfoCard/UnknownTagCard in dashboard right panel (known spools show assign/sync/close, unknown tags show add-to-inventory/link/close) - Rewrite AssignToAmsModal as full-screen overlay reusing AmsUnitCard, with AMS-HT and external slot support, single assignSpool API call - Remove printer selector from assign modal (uses top bar selection) - Extract filament_id <-> setting_id conversion to shared utility (backend/app/utils/filament_ids.py), used by inventory + cloud routes - Normalize slicer_filament in assign_spool to derive proper tray_info_idx and setting_id for MQTT (was sending setting_id="") - Rename SpoolBuddy top bar status label "Online" -> "Backend" - Remove weightStable guard from sync weight button * Added delete tag button to inventory's edit spool modal * Fix VP bind server rejecting TLS connections on port 3002 (#559) BambuStudio uses TLS on port 3002 for certain printer models (e.g. A1 Mini / N1). The bind server only spoke plain TCP on both ports, so the TLS ClientHello was rejected as "invalid frame" and the slicer could never discover or connect to the virtual printer. Port 3002 now uses TLS (reusing the VP's existing certificate), port 3000 remains plain TCP. Also updated proxy-mode to use TLSProxy for the port 3002 bind proxy instead of raw TCPProxy. * Fix SpoolBuddy scale calibration lost after reboot _get_mac_id() used Path.iterdir() to find a network interface for the device ID, but iteration order is non-deterministic. On different boots it could pick eth0 (MAC …3100) or wlan0 (MAC …3102), producing a different device_id each time. Since calibration is stored per device ID in the backend DB, a new ID meant registering as an uncalibrated device. Sort interfaces alphabetically so the same one is always selected. * fix(stats): calculate success rate from completed and failed prints only Previously divided successful prints by total_prints which includes cancelled/stopped prints, causing an incorrect percentage. * feat(stats): add new widgets, shared MetricToggle, and timeframe filtering Add Print Time of Day, Color Distribution, and Records widgets to the Stats page. Extract shared MetricToggle component for consistent weight/prints/time toggles. Add date range filtering to archives and stats API endpoints. Reorganize widgets into parent cards (Printer Stats and Filament Trends) and fix Dashboard layout persistence for new widgets. * test(stats): update StatsPage tests to match current widget structure Enrich mock archives with full fields, fix failure analysis endpoint, remove outdated Filament Types test, and add coverage for new widgets (Records, Printer Stats sub-cards, Filament Trends sub-cards). * refactor(stats): improve Color Distribution card layout and toggle Use MetricToggle component with new exclude prop instead of inline buttons, default to weight-first order, and redesign chart layout with centered donut, total label, and 2-column legend grid. * feat(stats): add /archives/slim endpoint and fix dashboard bugs - Add lightweight GET /archives/slim endpoint with column-level SELECT (13 fields vs 46), skipping duplicate detection for ~70-80% payload reduction on the stats dashboard - Add ArchiveSlim Pydantic schema and TypeScript type - Switch StatsPage and FilamentTrends to use ArchiveSlim - Fix critical bug in failure_analysis.py: use effective_days for week count, separate non-date filters, build fresh week_filter per loop - Fix busiestDay timezone bug: parse YYYY-MM-DD with split() + local Date constructor instead of new Date() which creates UTC midnight - Fix success streak ordering: sort by completed_at || created_at instead of created_at alone - Add 6 integration tests for /archives/slim endpoint * feat(stats): add hourly heatmap for short timeframes and fix timezone bugs Print Activity now shows an hourly heatmap (hours x days) for timeframes ≤7 days and dynamically adjusts calendar months for longer ranges. Adds hourly granularity to Filament Trends, persists timeframe selection, fixes optional chaining in QuickStatsWidget, and fixes UTC/local timezone mismatches in date key generation. Also hardens the /archives/slim limit param and fixes empty query string handling in API client. * Fix SpoolBuddy "Assign to AMS" slot showing empty fields in slicer The assign_spool endpoint sent wrong MQTT field values for user presets, causing the slicer's AMS slot detail card to show all fields empty. Two bugs: (1) cloud API was called with the raw slicer_filament value including its version suffix (e.g. PFUS9ac902733670a9_07), returning 404; the silent fallback sent setting_id as tray_info_idx instead of the real filament_id; (2) no SlotPresetMapping was saved after assignment. Now strips version suffixes before cloud lookup, resolves the real filament_id via cloud API (with local preset and generic fallbacks), includes brand in tray_sub_brands, and saves slot preset mapping. * Add SpoolBuddy backend + frontend test coverage 21 backend integration tests for all 12 SpoolBuddy API endpoints (device register/re-register/list, heartbeat status/commands/404/ offline broadcast, NFC tag match/unmatch/removal, scale reading/ weight calculation/missing spool, calibration tare/set-tare/ set-factor/zero-delta/get) and 20 frontend component tests for WeightDisplay, SpoolInfoCard, UnknownTagCard, and TagDetectedModal. * Fix printer card losing print info when paused (#562) The printer card only showed progress bar, print name, ETA, layers, and cover image when gcode_state was RUNNING. A paused print (state PAUSE) fell through to the idle display, hiding all print context. Added PAUSE to the display conditions in both compact and expanded view modes, and replaced the hardcoded "Printing" status label with getStatusDisplay() so it correctly shows "Paused". * Fix num_weeks calculation to ensure at least one week * Updated README * Add daily beta build publish script Automates the full beta release workflow: version bump in config.py, CHANGELOG date update, git commit + tag, multi-arch Docker build+push to GHCR and Docker Hub, and GitHub prerelease creation with changelog notes. Supports --parallel, --ghcr-only, --dockerhub-only, and --skip-release flags. Documents daily beta builds in README and DOCKERHUB.md. * Updated README * Add daily beta build publish script Builds multi-arch Docker image from the current APP_VERSION in config.py and pushes to GHCR + Docker Hub, overwriting the same beta tag. Creates or updates a GitHub prerelease with changelog notes. Users re-pull the tag or use Watchtower to get daily updates. Supports --parallel, --ghcr-only, --dockerhub-only, and --skip-release flags. Documents daily beta builds in README and DOCKERHUB.md. * Fix SpoolBuddy tag_type for linked spools + add inventory weight check column SpoolBuddy's "Link to Spool" used the generic updateSpool API which only set tag_uid, leaving tag_type and data_origin empty. Now uses linkTagToSpool with tag_type='generic' and data_origin='nfc_link'. Added a "Weight Check" inventory column (hidden by default) that compares each spool's last scale measurement against calculated gross weight with ±50g tolerance. Shows green check for match, yellow warning + sync button for mismatch. Backend stores last_scale_weight and last_weighed_at on each spool when weight is synced via SpoolBuddy. Includes edge case handling when scale weight < core weight. i18n keys added for all 6 locales. * Fix SpoolBuddy AMS page fill levels, ext-R active bug, and layout - Show inventory-based fill levels for non-BL spools in AMS slots by fetching spool assignments and computing fill from weight_used/label_weight, falling back to AMS remain when no assignment exists - Fix ext-R slot falsely highlighted as active when idle: tray_now=255 (no tray loaded) matched ext-R's id=255 without a guard - Improve single-slot card layout: use responsive grid aligned with AMS card columns, fix vertical stretching with few AMS units - Remove redundant L/R nozzle badges from ext slots (label already shows Ext-L/Ext-R) - Add 16 tests for ext active state logic and fill override fallback * Updated Spoolbuddy install script * Add on-screen virtual keyboard for SpoolBuddy kiosk UI The Raspberry Pi kiosk has no physical keyboard and system-level virtual keyboards (squeekboard, wvkbd) don't auto-show/hide with labwc/Chromium. Add a react-simple-keyboard QWERTY keyboard that auto-shows on input focus, with dark theme, shift/caps/backspace, email keys (@, .), and a two-phase close that prevents ghost-click passthrough to elements below. Inputs with data-vkb="false" opt out (e.g. SpoolBuddySettingsPage numpad). * Spoolbuddy frontend fixes * Display Controls (brightness + blanking) Root cause: The daemon used wlopm for screen blanking, but wlopm was never installed. Additionally, the daemon runs as the spoolbuddy system user which has no access to the Wayland socket, so Wayland-based tools can't work. Fix in display_control.py: - Replaced wlopm --off/--on with vcgencmd display_power 0/1 — this is a Raspberry Pi firmware-level command that's pre-installed and works without Wayland socket access - Added shutil.which("vcgencmd") check at init to avoid repeated failures on non-RPi hardware - Added explicit PermissionError handling for brightness writes with a helpful message about the video group Fix in install.sh: - Added video group to the spoolbuddy service user's groups (was: gpio, spi, i2c → now: gpio, spi, i2c, video), which grants access to both vcgencmd and sysfs backlight files Scale Tab Numpad Root cause: On the 1024x600 kiosk screen (~376px available content height), the weight info card + numpad + action buttons exceeded the space, causing tiny buttons and overlapping. Fix in SpoolBuddySettingsPage.tsx: - Hide the weight info card during weight entry step (calStep !== 'weight'), reclaiming ~70px - Compact inline weight reading in the step header (small dot + monospace text) so users can still see the live scale value - Larger numpad buttons: min-h-[56px] with text-lg font size (was no min-height, text-sm) - Added active:scale-95 for tactile touch feedback - mt-auto on action buttons to push them to the bottom, preventing overlap - Removed the wrapping card around the calibration flow to save vertical padding * Spoolbuddy 1. Device tab — repo URL unlinked Replaced the <a> tag with a <span> so the GitHub URL is displayed as plain text (no clickable link in kiosk mode). 2. Display controls — moved to frontend Root cause: The daemon runs as a system user without Wayland access, and the kiosk uses an HDMI display (no sysfs backlight). Neither wlopm, vcgencmd, nor sysfs writes can work in this setup. Fix — frontend-controlled display in SpoolBuddyLayout.tsx: - Brightness: CSS filter: brightness(X) applied to the layout root. Immediate visual dimming that works on any display type. - Screen blanking: Full-screen black overlay (z-[9999]) shown after the configured inactivity timeout. Touch anywhere to wake. - Activity tracking: Resets on pointerdown/keydown events AND on WebSocket-driven NFC/scale changes (weight update, tag scan). - Queries device data every 15s to read the current brightness and blank timeout values. Daemon display_control.py — Simplified: - Removed vcgencmd/wlopm/subprocess usage entirely - _blank/_unblank are now state-tracking no-ops (log only) - DSI backlight brightness via sysfs is preserved as a bonus for DSI displays - Updated docstring to explain the architecture 3. Scale tab — redesigned with step indicator Idle state: Same as before — weight card with tare/calibrate buttons. Calibration wizard: Two-column layout: - Left column (~64px): Vertical step indicator with numbered circles, checkmark for completed steps, and a connecting line - Right column: Live weight bar (with stable/settling indicator), step-specific content (instructions or numpad), and action buttons pinned to bottom via mt-auto The numpad buttons are min-h-[52px] with text-lg — large enough for touch on 1024x600. The weight info card is hidden during the weight entry step to maximize vertical space. * Redesign SpoolBuddy settings page, add language/time format support - Redesign settings page with tabbed layout (Device, Display, Scale, Updates) - Add screen blank timeout: blanks after touch inactivity, tap to wake - Add CSS brightness filter for HDMI displays (no sysfs on HDMI) - Add backend `language` field to app settings for server-side persistence - Sync UI language from backend on kiosk load (separate Chromium instance) - Top bar clock respects user's time format setting (system/12h/24h) - Add SpoolBuddy settings translations for all 6 languages (en/de/fr/ja/it/pt-BR) - Disable Chromium swipe-to-navigate in kiosk install script - Add `video` group for DSI backlight access * Add printer status badges, remove SpoolBuddy inventory page - Add printer status badges to dashboard left column (green/gray online/offline dots, compact wrapping pills, overflow-hidden) - Remove SpoolBuddy inventory page — inventory management belongs in the main Bambuddy frontend, not the kiosk - Remove inventory nav item from bottom nav (now 3 tabs) - Replace "Add to Inventory" navigate with quick-add modal that creates a basic PLA spool entry via API, with a hint to use the main Bambuddy UI for full spool details instead * Add SpoolBuddy NFC tag writing with OpenTag3D format Write NTAG213/215/216 tags for third-party spools via the SpoolBuddy kiosk UI. New "Write" page with three workflows: existing spool, new spool creation, and tag replacement. Backend encodes 133-byte OpenTag3D NDEF payloads (material, color, brand, weight, temp). Daemon writes page-by-page via PN5180 NTAG WRITE command with read-back verification. Write commands flow through heartbeat polling with WebSocket status updates. Includes 39 new tests and translations for all 6 languages. * Fix K-profile greenlet error on auto-created RFID spools create_spool_from_tray() didn't eagerly load the k_profiles relationship, so auto_assign_spool() triggered a lazy load in async context when iterating spool.k_profiles. Set k_profiles=[] on new spools since they can never have K-profiles yet. * Fix spurious error notifications from print_error status codes Some firmware sends non-zero print_error values (e.g. 0x03000002 → 0300_0002) during normal printing as status/phase indicators. The parser treated any non-zero value as a real error, triggering notifications. All known real errors have codes >= 0x4000 (fatal, warning, prompt ranges). Now skips print_error values where the low 16 bits are below 0x4000. Also fix K-profile greenlet error on auto-created RFID spools by eagerly setting k_profiles=[] after flush in create_spool_from_tray(). * Updated docker-publish-daily-beta.sh * Added Simplified Chinese translation zh-CN (Issue #571) * Add customizable low stock threshold, add low stock filter (#531) * feat(queue): show spool grams left in filament slot mapping * Bumped version * Add SpoolBuddy AMS slot config, external slots, and dashboard redesign - AMS page: external spool slots (Ext/Ext-L/Ext-R), click-to-configure modal on all slots, temperature/humidity threshold-colored indicators, nozzle L/R badges for dual-nozzle printers, compact AMS-HT layout - Dashboard: two-column layout with device status + printers list (left) and current spool card (right), state-colored scale/NFC icons, dashed border card styling - Daemon: suppress redundant scale reports (±2g threshold + stability state change detection) to prevent weight display bouncing - TopBar: auto-select online printers only, SpoolBuddy logo * Fix SpoolBuddy daemon crash when read_tag module is missing NFCReader.__init__ imported read_tag and instantiated PN5180() outside the try/except block, so a missing module crashed the entire daemon. Moved the import inside the existing try/except so the daemon gracefully skips NFC polling — matching the scale reader's existing behavior. * Fix SpoolBuddy daemon failing to import hardware drivers The daemon imports read_tag and scale_diag as bare modules, but they live in spoolbuddy/scripts/ which isn't on sys.path when systemd runs the daemon. Added scripts/ to sys.path at startup, resolved relative to the module file. Also moved the read_tag import inside NFCReader's try/except (was crashing the daemon instead of skipping gracefully) and demoted hardware-not-available messages from ERROR to INFO. * Increase scale moving average window to reduce weight bouncing 5 samples at 100ms (500ms window) wasn't enough to smooth NAU7802 ADC noise — the averaged value still varied by >2g between 1s report intervals, and the stability state kept flipping, triggering a report every cycle. Increased to 20 samples (2s window) so noise is smoothed before reaching the reporting layer. * Remove stability flipping as scale report trigger When ADC noise kept the spread hovering around the 2g stability threshold, the stable flag toggled every cycle, forcing a report with a slightly different weight each time. Now only actual weight changes of >=2g trigger reports. The stable flag is still included in each report for consumers that need it. * Fix formatting of option elements in FilamentMapping * Make low stock threshold editable * Add new filter for low spools * Update bug report template to require additional fields * Added toast for invalid imputs with locales, updated inputb field restrictions * Minor Spoolbuddy frontend improvements * Updated test_backend.sh * Updated Spoolbuddy install script to strip down Raspbian * Updated Spoolbuddy install script * Add API key auth support to /auth/me for SpoolBuddy kiosk When Bambuddy auth is enabled, the SpoolBuddy kiosk gets redirected to the login page because ProtectedRoute requires a user from GET /auth/me, which only handled JWT tokens. The kiosk daemon already has an API key but couldn't use it to satisfy the frontend auth check. - Backend: /auth/me now accepts API keys (Bearer bb_xxx or X-API-Key) and returns a synthetic admin UserResponse with all permissions - Frontend: AuthContext reads ?token= from URL on first load, stores in localStorage, and strips from URL (prevents history/referrer leakage) - Install script: kiosk URL now includes ?token=${API_KEY} - Tests: 3 new integration tests (Bearer API key, X-API-Key header, invalid key rejection) * SpoolBuddy touch-friendly UI overhaul for 1024x600 kiosk display Enlarge all interactive elements across 9 SpoolBuddy components to meet 44px minimum tap targets on the RPi touchscreen. Increase nav icons (20→24px), labels (10→12px), bar heights, section headers, printer buttons, spool visualizations, fill bars, and status indicators. Compact the dashboard stats bar and remove the printers card. Add fullScreen prop to ConfigureAmsSlotModal with two-column layout (filament list left, K-profile + color right) to eliminate scrolling. * Minor changes, CSS fixes * Refactor usageFilter state to remove 'lowstock' option for clarity * Move var saving to API, add test coverage * fix: threshold validation and cleanup * Change test input from '150' to '0' --------- Co-authored-by: tridev <c.tripod@gmx.ch> Co-authored-by: MartinNYHC <mz@v8w.de> * Add i18n keys for printer card drag-drop print overlay PR #569 introduces drag-drop printing on printer cards with inline fallback strings for common.uploading, common.uploadFailed, printers.dropToPrint, and printers.cannotPrint. Add these keys to all 7 locale files so they render in the correct language. * [Feature]: Printer Page - Add a print button & Drop zone on the printer card (#569) * Add printer card print flow with drag-drop and reusable LibraryUploadModal Extract inline upload modal from FileManagerPage into a reusable LibraryUploadModal component. Add a Print button and drag-drop zone to printer cards that upload files to the library and open PrintModal with the printer pre-selected. Only .gcode/.gcode.3mf files are accepted for printing. PrintModal hides printer selector when a printer is provided via initialSelectedPrinterIds prop. * Add printer compatibility check for drag-drop and upload-to-print flows Validates sliced_for_model from file metadata against the target printer model before opening the print modal, preventing users from printing with incompatible files. * Improve FileUploadModal: auto-close on success, inline errors, file validation, and i18n - Close modal automatically after successful upload instead of showing summary - Show printer compatibility errors inline in the modal instead of closing - Add validateFile and accept props to restrict file types for print flow - Add onFileUploaded error return to prevent modal close on incompatible files - Internationalize all hardcoded error/warning strings across 6 locales * Clean up incompatible files from library and fix print button i18n - Delete uploaded file from library when printer compatibility check fails in both drag-drop and modal upload flows - Fix print button tooltip to use existing common.print i18n key - Fix accept attribute to use .gcode,.3mf for proper browser support * Add printer information modal accessible from card 3-dot menu Replace inline IP/serial display at bottom of printer card with a dedicated "Printer Information" modal opened via the card menu. The modal shows model, status, state, IP address (copyable), serial number (copyable), WiFi signal, firmware, developer mode, nozzle count, SD card, auto-archive, total print hours, location, and added date, along with the printer image. Includes full i18n support across all 6 locales and accessibility attributes (role="dialog", aria-modal). * Extract getPrinterImage and getWifiStrength into shared printer utils --------- Co-authored-by: MartinNYHC <mz@v8w.de> * Post work PR #569 * Fix AMS slot modal infinite scroll loop on Windows Inline callback refs on preset buttons called scrollIntoView on every re-render, creating a scroll → re-render → scrollIntoView loop on Windows. Replace with a useEffect + data attribute approach that only scrolls when the selected preset actually changes. * Add energy cost to archive card (#573) * Add energy cost to archive card * Replace Disc3 icon with Coins in ArchivesPage --------- Co-authored-by: MartinNYHC <mz@v8w.de> * Revert "Merge pull request #578 from aneopsy/fix-ams-slot" This reverts commit d4aa77f502, reversing changes made to 82178f8abd. * Reverted commit d4aa77f502 * Remove obsolete slicer_binary_path setting from database The slicer_binary_path key was left in the settings table from earlier slicer integration research but is no longer referenced anywhere in the codebase. Add a startup migration step that deletes orphaned settings keys so they don't persist in backups. * Add Hungarian Forint (HUF) currency for filament cost tracking Closes #579 — adds HUF with symbol "Ft" to the supported currencies list so Hungarian users can track filament costs in their local currency. * Fix AMS slot showing wrong material for "Support for" profiles Profiles like "PLA Support for PETG PETG Basic @Bambu Lab H2D" have filament_type PETG, but both the frontend and backend name parsers found "PLA" first (iterating material types in order). The MQTT command sent tray_type=PLA and tray_info_idx=GFL99 (PLA generic), so the slicer displayed PLA instead of PETG. - Frontend parsePresetName(): detect "X Support for Y" pattern, extract material after "Support for" - Frontend ConfigureAmsSlotModal: prefer corrected parsed material over stored localPreset.filament_type for tray_type, tray_info_idx, and temperature fallback - Backend _parse_material_from_name(): same "Support for" handling for future profile imports - Backend assign_spool: prioritize spool.material over lp.filament_type for generic filament ID lookup * Improve FTP upload progress and widen print modal FTP upload: reduce chunk size from 1MB to 64KB for smooth progress bar updates (~1s intervals instead of 20+ second gaps). Skip voidresp() for all printer models — H2D delays the 226 response by 30+ seconds after data transfer, causing a hang at 100%. Add transfer speed and TLS handshake timing to logs for diagnosing slow connections. Print/Schedule modal: widen from max-w-lg (512px) to max-w-2xl (672px) to accommodate long filament profile names like "PLA Support for PETG PETG Basic @Bambu Lab H2D 0.4 nozzle". * Fix archive card showing "Source" badge for sliced .3mf files The isSlicedFile() check only matched .gcode or .gcode.3mf extensions, so archives from .3mf prints (the standard Bambu slicer output) showed a "SOURCE" badge instead of "GCODE". Since .3mf can be either sliced or a raw CAD export, now checks the archive's total_layers and print_time_seconds metadata to distinguish them. Also passes the original filename when creating archives from file manager prints. * Refactor date and currency utility functions - Extract shared detectSystemDateFormat() helper to eliminate duplicated system locale detection in date.ts - Derive SUPPORTED_CURRENCIES from CURRENCY_SYMBOLS map instead of maintaining a duplicate hardcoded list - Consolidate redundant time-parsing regex paths into one - Use applyTimeFormat() consistently in formatETA() - Add exhaustive switch default for type safety * Consolidate duplicate utility functions into shared modules Extract repeated helper functions from components into shared utils (colors.ts, date.ts, file.ts) to reduce duplication: - isLightColor, parseFilamentColor, hexToColorName → utils/colors.ts - formatMediaTime, formatDurationFromHours → utils/date.ts - formatFileSize guard hardened for NaN/negative → utils/file.ts - formatBytes (ToastContext), formatTime (Timelapse*) deduplicated Functions with subtly different behavior are intentionally kept local (formatFilament, formatStorageSize, formatBytes, formatUptime, formatDateTime, formatDate, formatTimeAgo) to preserve exact UI output. * Fix spurious 0300_0002 error notification via HMS array path (#583) The previous fix only filtered status codes (< 0x4000) from the print_error field. Firmware can also send the same false positive through the hms array in MQTT, which had no such filter. Apply the same < 0x4000 check to the HMS parser so status/phase indicators are skipped regardless of which MQTT field carries them. * Add SSDP model codes to firmware check mapping (#584) The firmware check only mapped display names (e.g., "H2D Pro") to API keys but not raw SSDP device codes (e.g., "O1E", "O2D"). If a printer's model was stored as the raw SSDP code, the firmware check either failed or matched the wrong model — H2D Pro matched against H2D firmware, showing a false update-available badge. Add all known SSDP device codes to MODEL_TO_API_KEY so firmware versions resolve correctly regardless of how the model was stored. * Show ethernet indicator instead of WiFi signal for wired printers (#585) Parse home_flag bit 18 (0x00040000) from MQTT to detect ethernet connections. When set, the printer card shows a green "Ethernet" badge with a cable icon instead of WiFi signal strength in dBm. The printer info modal also displays "Ethernet" instead of WiFi signal details. * Post work PR #581 * Add in-app bug reporting with relay, debug log collection, and privacy controls Floating bug report button submits issues via bambuddy.cool relay (no GitHub token needed locally). Collects 30s debug logs with printer push_all, sanitizes all sensitive data, uploads logs as files to GitHub. Screenshot upload/paste/drag with JPEG compression. Translated into all 7 languages. Includes 21 tests. * [Fix]: AMS slot modal infinite scroll loop on Windows (#580) * Fix AMS slot modal not scrolling to preselected filament The scroll useEffect fired before the loading spinner was replaced by the preset list, so the DOM element didn't exist yet. The ref guard was then set, preventing any retry once buttons appeared. - Move isLoading computation before the scroll effect and add it as a dependency so the effect re-runs when loading completes - Gate scroll on !isLoading so it only runs when buttons exist - Only mark scrolledToRef after the element is actually found - Use requestAnimationFrame to scroll after browser layout - Use block:'center' so the selected item is clearly visible Preselect filament for printer-configured AMS slots When an AMS slot was configured directly on the printer (no savedPresetId), the modal didn't preselect the filament even though it was in the list. Add a third fallback that matches trayInfoIdx against the full filteredPresets list (cloud and builtin sources). * Restore scrolledToRef lost during merge The useRef import, scrolledToRef declaration, and its reset were dropped during the 0.2.2b1 merge, causing a ReferenceError in the scroll-to-preselected-filament effect. * Fix preset scroll loop and wire up useEffect scroll logic - Remove inline ref callbacks with scrollIntoView on both preset button lists (fullscreen + standard) to stop the infinite scroll loop on Windows - Add data-preset-id attribute so the existing useEffect/querySelector scroll logic can actually find the elements - Replace filteredPresets dependency with builtinFilaments in the selection useEffect to prevent search keystrokes from overriding manual preset selection * Adjust scroll behavior in ConfigureAmsSlotModal --------- Co-authored-by: MartinNYHC <mz@v8w.de> * Housekeeping --------- Co-authored-by: tridev <c.tripod@gmx.ch> Co-authored-by: AneoPsy <paultevatheis@gmail.com> Co-authored-by: Keybored <78739882+Keybored02@users.noreply.github.com>	2026-03-04 14:22:21 +01:00
maziggy	662cedef5d	Updated README	2026-03-01 18:29:28 +01:00
maziggy	1271e79717	Updated README	2026-03-01 18:11:36 +01:00
maziggy	b2bf8c7100	Updated README	2026-02-28 15:25:00 +01:00
MartinNYHC	f56882642f	Merge pull request #555 from maziggy/0.2.1.1 ... v0.2.1.1 Just one day ago after the last release, but I decided to make life a little better for those of you guys who are just received their new H2C :) What happened? Recent H2C deliveries from Bambu Lab ship with an updated internal model identifier: O1C2 instead of the previously known O1C. Bambuddy only recognized O1C, so these newer H2C units were not properly identified. Also included some fixes. - Fix sidebar navigation not respecting user permissions - Fix camera button permissions & ffmpeg process leak (#550) - Fix A1 Mini "unknown" status from non-UTF-8 MQTT payload (#549) - Fix Windows install syntax error from LF line endings (#544) - Fix queue badge showing on printers without matching filament (#486) - Fix naive-vs-aware datetime crash from 0.2.1 timezone migration v0.2.1.1	2026-02-28 15:16:46 +01:00
MartinNYHC	2c99b631fa	Merge branch 'main' into 0.2.1.1	2026-02-28 15:04:45 +01:00
maziggy	9ee4bd51e4	Sync	2026-02-28 14:59:04 +01:00
maziggy	51ac1b1d35	Bumped version	2026-02-28 14:45:32 +01:00
maziggy	cca4e6fab2	Uodated issue template	2026-02-28 14:39:18 +01:00
maziggy	f2f43b98a3	Fix sidebar navigation not respecting user permissions ... Sidebar nav items (Archives, Queue, Stats, Profiles, Maintenance, Projects, Inventory, Files) were visible to all users regardless of role permissions — only Settings was gated. Now each item is hidden when the user lacks the corresponding read permission. Printers remains always visible as the home page. Also adds missing inventory:read|create|update|delete to the frontend Permission type (existed in backend but was absent from the frontend type definition).	2026-02-28 14:39:10 +01:00
maziggy	90b9523998	Updated commit message (now includes the test fix): ... Fix camera button permissions & ffmpeg process leak (#550) Camera button on printer card was clickable without camera:view permission. ffmpeg processes (~240MB each) accumulated after closing camera streams because: (1) stop endpoint called terminate() without wait()/kill(), (2) HTTP disconnect detection only ran between frames so was blocked when the generator was stuck on stdout read, and (3) no mechanism caught processes orphaned by generator abandonment or app restarts. - Add camera:view permission check + tooltip to camera button - Fix stop endpoint: terminate() → wait(2s) → kill() → wait() - Add background disconnect monitor (polls every 2s, kills ffmpeg directly on disconnect) - Add periodic /proc scan (every 60s) that SIGKILLs any ffmpeg with rtsps://bblp: not in an active stream - Add noCamera i18n key to all 6 locales - Fix camera API test mocks for async wait() and pid attribute	2026-02-28 14:38:45 +01:00
maziggy	240eeb4f5d	Add H2C dual nozzle variant O1C2 model support (#489) ... The H2C dual nozzle variant reports model code O1C2 via MQTT, but only O1C was recognized. This caused the camera to use the wrong protocol (chamber image on port 6000 instead of RTSP on port 322), producing a reconnect loop. Added O1C2 to all model ID maps across 8 files.	2026-02-28 14:38:11 +01:00
maziggy	5df2b82673	Fix A1 Mini "unknown" status from non-UTF-8 MQTT payload (#549) ... Some firmware versions send MQTT payloads with non-UTF-8 bytes. UnicodeDecodeError was uncaught, silently dropping the entire message and leaving printer status as "unknown" with 0°C temps and no AMS. Fall back to decode(errors="replace") to keep JSON parseable.	2026-02-28 14:36:56 +01:00
maziggy	abd20056ae	Fix Windows install syntax error from LF line endings (#544) ... The start_bambuddy.bat launcher had Unix (LF) line endings. When a user's git is configured with core.autocrlf=false or input, the file is checked out with LF endings and cmd.exe fails with "the syntax of the command is incorrect" before reaching the hash check. Add .gitattributes forcing CRLF for *.bat files so they always get correct line endings on checkout regardless of git config.	2026-02-28 14:36:25 +01:00
maziggy	d3bae07edf	Fix queue badge showing on printers without matching filament (#486) ... The purple queue counter badge in the printer card header used the raw unfiltered queue item count, so it appeared on ALL printers of the same model when a job was scheduled for "any [model]" — even printers without the matching filament color. The PrinterQueueWidget below it (which shows "Clear Plate & Start") already filtered by filament type + color. Apply the same filament compatibility filter (type check + color override check) to the badge count so it only shows on printers that can actually run the queued jobs.	2026-02-28 14:36:12 +01:00
maziggy	b1cc3462ed	Fix naive-vs-aware datetime crash from 0.2.1 timezone migration ... The timezone fix (ed36eaf) replaced datetime.utcnow() with datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's SQLite DateTime columns strip tzinfo on read, returning naive datetimes. Any Python-side comparison (subtraction, <, >) between an aware "now" and a naive DB value raises TypeError. Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)` guards at all 9 affected comparison sites: - maintenance.py: last_performed_at subtraction (2 code paths — days-based and hours-based intervals both crashed on /maintenance/overview) - auth.py: API key expires_at check (2 locations) - print_scheduler.py: scheduled_time comparison - smart_plug_manager.py: auto_off_pending_since elapsed calc - smart_plugs.py: power_alert_last_triggered cooldown - main.py: last_runtime_update elapsed calc - archives.py: timelapse completed_at fallback	2026-02-28 14:35:02 +01:00
maziggy	233e84c03a	Fix naive-vs-aware datetime crash from 0.2.1 timezone migration ... The timezone fix (ed36eaf) replaced datetime.utcnow() with datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's SQLite DateTime columns strip tzinfo on read, returning naive datetimes. Any Python-side comparison (subtraction, <, >) between an aware "now" and a naive DB value raises TypeError. Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)` guards at all 8 affected comparison sites: - maintenance.py: last_performed_at subtraction (500 on /maintenance/overview) - auth.py: API key expires_at check (2 locations) - print_scheduler.py: scheduled_time comparison - smart_plug_manager.py: auto_off_pending_since elapsed calc - smart_plugs.py: power_alert_last_triggered cooldown - main.py: last_runtime_update elapsed calc - archives.py: timelapse completed_at fallback	2026-02-28 14:34:55 +01:00
maziggy	105beb0929	Updated CI	2026-02-28 14:34:46 +01:00
maziggy	b5a5462816	Uodated issue template	2026-02-28 13:10:48 +01:00
maziggy	aeed41684b	Fix naive-vs-aware datetime crash from 0.2.1 timezone migration ... The timezone fix (ed36eaf) replaced datetime.utcnow() with datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's SQLite DateTime columns strip tzinfo on read, returning naive datetimes. Any Python-side comparison (subtraction, <, >) between an aware "now" and a naive DB value raises TypeError. Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)` guards at all 9 affected comparison sites: - maintenance.py: last_performed_at subtraction (2 code paths — days-based and hours-based intervals both crashed on /maintenance/overview) - auth.py: API key expires_at check (2 locations) - print_scheduler.py: scheduled_time comparison - smart_plug_manager.py: auto_off_pending_since elapsed calc - smart_plugs.py: power_alert_last_triggered cooldown - main.py: last_runtime_update elapsed calc - archives.py: timelapse completed_at fallback v0.2.1	2026-02-27 17:45:58 +01:00
maziggy	0d0223cb52	Fix naive-vs-aware datetime crash from 0.2.1 timezone migration ... The timezone fix (ed36eaf) replaced datetime.utcnow() with datetime.now(timezone.utc) across ~80 call sites, but SQLAlchemy's SQLite DateTime columns strip tzinfo on read, returning naive datetimes. Any Python-side comparison (subtraction, <, >) between an aware "now" and a naive DB value raises TypeError. Add `if value.tzinfo is None: value = value.replace(tzinfo=timezone.utc)` guards at all 8 affected comparison sites: - maintenance.py: last_performed_at subtraction (500 on /maintenance/overview) - auth.py: API key expires_at check (2 locations) - print_scheduler.py: scheduled_time comparison - smart_plug_manager.py: auto_off_pending_since elapsed calc - smart_plugs.py: power_alert_last_triggered cooldown - main.py: last_runtime_update elapsed calc - archives.py: timelapse completed_at fallback	2026-02-27 17:38:47 +01:00
maziggy	efccaadd6d	Updated CI	2026-02-27 14:54:08 +01:00
MartinNYHC	eee901fc20	Merge pull request #536 from maziggy/0.2.1 ... # Bambuddy v0.2.1 ## New Features - **Multiple Virtual Printers** — Run multiple virtual printers per installation, each with a dedicated bind IP and fully independent FTP, MQTT, SSDP, and Bind servers. Full CRUD API and React UI for creating, editing, and deleting instances. Supports all four modes, any of the 11 printer models, per-instance TLS certificates, and individual network interface override. - **Background Print Dispatch** ([#112](https://github.com/maziggy/bambuddy/issues/112)) — Printing from archives and the file manager now runs in the background. FTP uploads are decoupled from API request latency, so the UI responds immediately. Real-time progress via WebSocket with per-job upload bars, status badges, and a cancel button. - **Filament Cost Tracking** ([#452](https://github.com/maziggy/bambuddy/issues/452)) — Track per-spool filament costs and see cost breakdowns for every print. Archive cards display total cost, the print modal shows a real-time cost preview, and the inventory table includes a sortable cost/kg column. A global default filament cost setting provides a fallback. Contributed by @Keybored02. - **Filament Override for Model-Based Queue** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — When scheduling to "any printer", you can now override the 3MF's original filament choices. The scheduler matches against overridden type and color, preferring printers with exact color matches. - **Bulk Spool Addition & Stock Spools** ([#480](https://github.com/maziggy/bambuddy/issues/480)) — Quick Add mode for inventorying filament without a slicer profile. Quantity field creates up to 100 identical spools in one transaction. Stock spools shown with an amber badge. New grouping toggle collapses identical unused spools into expandable rows. - **Developer LAN Mode Detection** — Automatically detects printers without Developer LAN Mode enabled and shows a persistent warning banner with affected printer names and a link to Bambu Lab's documentation. - **Clear Plate Permission** ([#446](https://github.com/maziggy/bambuddy/issues/446)) — New `printers:clear_plate` permission so users can confirm plate clears without needing full `printers:control`. - **Full-Page Group Permission Editor** ([#446](https://github.com/maziggy/bambuddy/issues/446)) — Replaced the cramped permission modal with a dedicated full-page editor featuring a 2-column grid, search/filtering, and bulk actions. - **External Materials & Brands in Spool Form** ([#455](https://github.com/maziggy/bambuddy/issues/455)) — The spool form now allows using custom materials and brands not in the Bambu filament catalog when adding or editing spools. - **Energy Cost 3-Decimal Precision** ([#416](https://github.com/maziggy/bambuddy/issues/416)) — Energy cost values now support 3 decimal places (e.g., €0.123/kWh) instead of 2, for more accurate cost tracking in regions with fractional energy pricing. - **Include Beta Updates Setting** — New toggle to opt in to beta/prerelease update notifications. Default: off (stable only). - **Virtual Printer Dual Bind/Detect Ports** ([#445](https://github.com/maziggy/bambuddy/issues/445)) — The slicer bind/detect handshake now listens on both ports 3000 and 3002 for compatibility across BambuStudio/OrcaSlicer versions. ## Fixed ### Print Queue & Scheduling - **Queue Empty After Container Restart** ([#523](https://github.com/maziggy/bambuddy/issues/523)) — SQLite WAL not checkpointed on shutdown. Now runs `PRAGMA wal_checkpoint(TRUNCATE)` before exit. - **Queue Stuck on "Busy" for "Any Model" Jobs** ([#435](https://github.com/maziggy/bambuddy/issues/435)) — Queue API now uses OR logic to also return unassigned items whose `target_model` matches the printer's model. - **Queue "Any Model" Jobs Stuck in "Waiting" After Plate Clear** ([#435](https://github.com/maziggy/bambuddy/issues/435)) — MQTT raw AMS data returned IDs as strings; fixed type casting. - **"Queue to Any Printer" Ignores Filament Color Override** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — Now requires at least 1 color match when filament overrides specify colors. - **"Clear Plate & Start Next" Ignores Filament Override Color** ([#486](https://github.com/maziggy/bambuddy/issues/486)) — Frontend now checks override colors, mirroring the backend's color matching logic. - **"Clear Plate & Start Next" Shown on Printers Without Correct Filament** ([#527](https://github.com/maziggy/bambuddy/issues/527)) — Widget now filters queue items by filament compatibility. - **Virtual Printer Queue Sends Wrong Plate ID** ([#529](https://github.com/maziggy/bambuddy/issues/529)) — `plate_id` was always `1`; now extracts plate index from 3MF's `slice_info.config`. - **Virtual Printer Queue Ignores AMS Mapping** ([#529](https://github.com/maziggy/bambuddy/issues/529)) — Scheduler now computes AMS mapping for all queue items that lack one. - **Virtual Printer Queue Mode Doesn't Assign Printer** ([#518](https://github.com/maziggy/bambuddy/issues/518)) — Now assigns the VP's target printer or falls back to model-based scheduling. - **Unnecessary Target Model Selector on "Any" Tab** ([#528](https://github.com/maziggy/bambuddy/issues/528)) — Dropdown hidden when sliced model is known. - **Print Queue Shows UUID Hash Instead of Filename** ([#438](https://github.com/maziggy/bambuddy/issues/438)) — Library files now display the original human-readable name. - **SD Card Cleanup After Print Never Runs** ([#374](https://github.com/maziggy/bambuddy/issues/374)) — Used wrong printer object type; fixed to use DB query. - **Phantom Prints From Lingering SD Card Files** ([#477](https://github.com/maziggy/bambuddy/issues/477)) — Fixed retry loop, added cleanup on `start_print()` failure. ### AMS & Filament - **AMS History Chart Shows Wrong Time Range** ([#535](https://github.com/maziggy/bambuddy/issues/535)) — X axis now pinned to the full requested time range. - **Manual Spool Weight Overwritten by AMS Auto-Sync** ([#525](https://github.com/maziggy/bambuddy/issues/525)) — Added `weight_locked` flag for manual weight entries. - **AMS Slot Auto-Config Falls Back to Generic Instead of Spool's Preset** — Fixed PFUS*/P* custom preset handling and "sticky" generic ID reuse. - **PCTG Filament Misidentified as PC** ([#478](https://github.com/maziggy/bambuddy/issues/478)) — Reordered material parser; added PCTG to all material type arrays. - **External Spool Mapping Inverted on H2C** ([#492](https://github.com/maziggy/bambuddy/issues/492)) — Now uses `active_extruder` on dual-nozzle printers. - **External Spool Assignments Lost on Restart** ([#493](https://github.com/maziggy/bambuddy/issues/493)) — Now looks up external assignments in `vt_tray` data. - **Filament Fill Level Wrong / Missing for External Spools** ([#496](https://github.com/maziggy/bambuddy/issues/496)) — Fixed priority chain, removed misleading gray fallback bar, added AMS remain fallback for external spools. - **Wrong AMS Unit Displayed With Dual AMS on P2S** ([#420](https://github.com/maziggy/bambuddy/issues/420)) — Now cross-references `tray_now` with MQTT mapping field for multi-AMS printers. - **H2D Tray Disambiguation Produces Bogus IDs for AMS-HT** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — Fixed AMS-HT global tray ID computation across multiple code paths. - **Usage Tracking Wrong Spool on Multi-AMS Printers** ([#364](https://github.com/maziggy/bambuddy/issues/364)) — Now decodes MQTT mapping field from snow encoding for universal spool resolution. - **Spool Usage Lost When Spool Runs Empty Mid-Print** ([#459](https://github.com/maziggy/bambuddy/issues/459)) — Snapshots assignments at print start; splits weight across trays using per-layer gcode data. - **Spool Form Allows Empty Brand & Subtype** ([#417](https://github.com/maziggy/bambuddy/issues/417)) — Brand and Subtype now mandatory. ### Printing & Archives - **Inconsistent Print Cost on Reprints** ([#505](https://github.com/maziggy/bambuddy/issues/505)) — Removed redundant cost paths; now computes from current session only. - **Finish Photo Not Captured When Archive Has No Source 3MF** ([#484](https://github.com/maziggy/bambuddy/issues/484)) — Falls back to `archive/{id}/` directory. - **Finish Photo Not Shown for BambuStudio Prints** ([#474](https://github.com/maziggy/bambuddy/issues/474)) — Fixed path resolution for empty `file_path`. - **Archive Endpoints Crash With "Is a directory"** ([#475](https://github.com/maziggy/bambuddy/issues/475)) — Replaced `.exists()` with `.is_file()` across 15 locations. - **File Manager Rename Doesn't Update Displayed Name** ([#460](https://github.com/maziggy/bambuddy/issues/460)) — Rename now also updates `print_name` in file metadata. - **"Open in Slicer" Fails for Special Characters** — Sanitizes `/`, `\`, `?`, `#` to `_` in slicer download URLs. - **"Open in Slicer" Fails When Auth Enabled** ([#421](https://github.com/maziggy/bambuddy/issues/421)) — Added short-lived, single-use download tokens with platform-specific URL formats. - **Non-Actionable HMS Errors Triggering Notifications** ([#470](https://github.com/maziggy/bambuddy/issues/470)) — Suppresses MQTT auth failures, cloud connection failures, and user cancellations. - **ntfy Notifications Fail With "Illegal header value"** ([#466](https://github.com/maziggy/bambuddy/issues/466)) — Escapes newlines in HTTP headers; retries without image when attachments disabled. - **Print Bed Cooled Notification Never Triggers** ([#497](https://github.com/maziggy/bambuddy/issues/497)) — Moved bed cooldown monitor before archive lookup early-return. - **K-Profile Response Race Condition Crash** ([#462](https://github.com/maziggy/bambuddy/issues/462)) — Fixed TOCTOU race between MQTT callback and asyncio thread. ### Permissions & UI - **"Power Off Printer" Not Gated by Control Permission** ([#500](https://github.com/maziggy/bambuddy/issues/500)) — Checkbox now disabled for users without `printers:control`. - **Created Admin Users Can't See Settings Button** ([#503](https://github.com/maziggy/bambuddy/issues/503)) — Now uses `hasPermission('settings:read')` instead of hardcoded role check. - **Settings Text Fields Reset While Typing** — Removed stale state overwrite from auto-save handler. - **Spool Form Profile Dropdown Truncates Long Names** ([#534](https://github.com/maziggy/bambuddy/issues/534)) — Removed inline filament codes; widened modal. ### Timestamps & Dates - **Timestamps Off by Timezone Offset in Non-UTC Containers** ([#504](https://github.com/maziggy/bambuddy/issues/504)) — Replaced `datetime.now()` / `datetime.utcnow()` with `datetime.now(timezone.utc)` across 16 files (~80 call sites). Fixed 13 frontend `new Date()` calls. - **Inventory Date Format Ignores Settings** ([#463](https://github.com/maziggy/bambuddy/issues/463)) — Now respects date format setting. - **Inventory Location Shows Garbled Characters for AMS-HT Slots** ([#463](https://github.com/maziggy/bambuddy/issues/463)) — Now uses shared `formatSlotLabel()` utility. ### Docker & Infrastructure - **FTP Proxy Cannot Bind to Port 990 in Docker** — `cap_add: NET_BIND_SERVICE` didn't reliably propagate with the `user:` directive. Now sets file capabilities via `setcap` in the Dockerfile. - **Support Bundle Leaking Personal Data** ([#473](https://github.com/maziggy/bambuddy/issues/473)) — Now queries DB for sensitive values; uses httpx `auth` parameter for smart plug credentials; redacts serial numbers fully. - **IP Addresses Not Redacted From Support Bundle** — Added IPv4 regex that preserves firmware version strings. ### AMS Mapping & Dual-Nozzle (H2D/H2C) - **7 AMS Mapping Fixes** — Hard nozzle filter, external spool extruder, `ams_extruder_map` race condition, `group_id` priority, dual-nozzle detection, AMS-HT `globalTrayId`, dropdown nozzle filter. - **Nozzle Mapping Uses Wrong Source in 3MF** — Now uses `group_id` as primary source instead of `filament_nozzle_map`. - **H2D Tray Disambiguation Triggers on Single-Nozzle Printers** — Now uses persistent `_is_dual_nozzle` flag. - **Cancelled Print Usage Tracking Uses Stale Progress** — Now captures last valid progress/layer during printing. - **Developer Mode Detection Always Reports Null** — Fixed `int(value, 16)` TypeError on integer MQTT field. ### Other - **Wrong Documentation Link for "Lubricate Carbon Rods" on P2S** ([#490](https://github.com/maziggy/bambuddy/issues/490)) - **"Unknown stage (74)" on H2D** — Mapped stage 74 ("Preparing") and 77 ("Preparing AMS"). - **Color Tooltip Clipped Behind Adjacent Swatches** — Added z-index. - **PAUSED State Never Matched** ([#447](https://github.com/maziggy/bambuddy/issues/447)) — Removed dead `PAUSED` checks; printer only sends `PAUSE`. ## Improved - **Queue API Returns More Print Metadata** ([#524](https://github.com/maziggy/bambuddy/issues/524)) — Endpoints now include `filament_type`, `filament_color`, `layer_height`, `nozzle_diameter`, and `sliced_for_model`. - **Filament Catalog API Renamed** ([#427](https://github.com/maziggy/bambuddy/issues/427)) — `/api/v1/filaments/` → `/api/v1/filament-catalog/` for clarity. - **Clear Plate Dot Indicator on Sidebar** — Yellow dot on Printers icon when plate clear is needed. - **Inventory Sidebar Always Visible** — Shows Spoolman iframe or internal inventory based on mode. - **Queue Page Mobile Responsiveness** — Improved layout for mobile devices. - **Storage Size Formatting & Overdue Queue Items** — UI polish and i18n fixes. - **Brazilian Portuguese Translation** — Full translation contributed by @wreuel. - **H2D Pro Printer Image** — Added H2D Pro image and model mapping. Contributed by @cimdDev. - **Native Updater Script** — Systemd-based updater with backup and safety checks. Contributed by @uefigs139. - **Docker Install iptables Option** — Option to add iptables port redirect during Docker install. Contributed by @wreuel. - **Frontend Pre-Commit Hooks** ([#458](https://github.com/maziggy/bambuddy/issues/458)) — TypeScript type checking and ESLint on staged frontend files. - **Show Remaining Spool Weight** — Displays remaining weight instead of used weight. Contributed by @Keybored02. ## Community Contributors Thank you to everyone who contributed to this release: - **@Keybored02** — Filament cost tracking, remaining weight display, spool form fixes - **@wreuel** — Brazilian Portuguese translation, Docker iptables install option - **@cimdDev** — H2D Pro printer image - **@uefigs139** — Native updater script - **@aneopsy** — Queue page mobile responsiveness, page refactoring, UI improvements	2026-02-27 10:44:36 +01:00
maziggy	f8b2ebd695	Added # nosec B108 suppressions for virtual printer tests	2026-02-27 10:41:38 +01:00
MartinNYHC	e8c0bae7c8	Merge branch 'main' into 0.2.1	2026-02-27 10:36:44 +01:00
maziggy	5cdeb4207c	Updated CHANGELOG	2026-02-27 10:28:55 +01:00
maziggy	d91d95a1ec	Fix FTP proxy port 990 permission denied in Docker ... cap_add: NET_BIND_SERVICE in docker-compose.yml doesn't reliably propagate to the Python process when combined with the user: directive (depends on ambient capability support in the container runtime). Set the file capability directly on the Python binary via setcap in the Dockerfile, which the kernel honors regardless of runtime config.	2026-02-27 10:25:48 +01:00
maziggy	55c332d91a	Housekeeping	2026-02-27 10:05:03 +01:00
maziggy	6e2788517c	Updated test_backend.sh	2026-02-27 09:48:31 +01:00
maziggy	94d0f55e1c	Fix AMS history chart showing wrong time range (#535) ... The chart X axis used dataMin/dataMax domain, compressing the view to only the data present. A 6h view with 1.5h of data looked like 1.5h. Pin the X axis to the full selected time range, pad data edges so the line extends to both ends, and connect through nulls for a continuous line.	2026-02-27 08:44:24 +01:00
maziggy	ad6108c8a7	Fix "Clear Plate" button shown on printers without matching filament color (#486) ... When a print was queued to "any printer" with a filament color override (e.g., white PETG), the "Clear Plate & Start Next" button appeared on printers that had the right type but wrong color. The backend scheduler already rejected color mismatches, but the frontend only checked filament types. Now passes loaded type+color pairs from AMS status to the widget and filters against filament_overrides, mirroring the backend's _count_override_color_matches() logic.	2026-02-27 08:03:21 +01:00
maziggy	2c8fbf3e33	Fix queue empty after restart by checkpointing WAL on shutdown (#523) ... The SQLite WAL was never checkpointed during container shutdown, leaving uncommitted data (including schema migrations) in the -wal file. On restart, partial WAL recovery could cause inconsistent query results, making the queue appear empty until a filter was applied. Add PRAGMA wal_checkpoint(TRUNCATE) and engine.dispose() to the lifespan shutdown handler.	2026-02-27 07:41:03 +01:00
maziggy	4f5a9f4b95	Fix spool form profile dropdown truncating long preset names (#534) ... Long filament profile names were cut off because inline filament ID codes consumed horizontal space in the dropdown. Remove the codes from dropdown items (selected code still shown below the input) and widen the modal from max-w-lg to max-w-xl.	2026-02-27 07:30:03 +01:00
maziggy	2284a76381	Fix VP queue mode missing AMS mapping for printer-specific items (#529) ... The print scheduler had two code paths for queue items: model-based (target_model set) and printer-specific (printer_id set). Only the model-based path computed ams_mapping before starting the print. VP queue items assigned to a specific printer went through the printer-specific path with null ams_mapping, causing the printer to default to the first AMS slot regardless of what the 3MF required. Add _compute_ams_mapping_for_printer() call to the printer-specific path, matching the existing model-based behavior.	2026-02-27 07:24:59 +01:00
maziggy	a6d326f8fa	Fix VP queue mode sending wrong plate_id → HMS 0500_4003 (#529) ... When a virtual printer auto-queued a file, PrintQueueItem was created without plate_id. The scheduler defaulted to plate_id=1, generating MQTT path "Metadata/plate_1.gcode". For multi-plate 3MF files sliced on a different plate, the printer couldn't find the gcode and returned HMS error 0500_4003. Extract plate index from the 3MF's slice_info.config before creating the queue item.	2026-02-26 10:00:33 +01:00
maziggy	f4f09ccc2d	Hide unnecessary target model selector on "Any" tab (#528) ... When scheduling a print to "Any {model}", a redundant "Target Model" dropdown appeared even though the G-code is already sliced for a specific printer model. Changing it would lead to print failures. Hide the dropdown when slicedForModel is known — the tab label already communicates the target. The dropdown still appears as a fallback for legacy files without model metadata.	2026-02-26 09:13:06 +01:00
maziggy	20c291d678	Fix "Clear Plate & Next" shown on printers without correct filament (#527) ... The "Clear Plate & Start Next" button appeared on ALL printers of a model when a job was queued via "Queue to Any X", even printers without the required filament loaded. Clicking it started a print that fails. PrinterQueueWidget now filters queue items by filament compatibility — each item's required_filament_types must all be present in the printer's loaded filaments (AMS + external spools). If no compatible items exist, the widget is hidden entirely. Matching is type-only (not color) and case-insensitive, consistent with the backend scheduler. When filament data is unavailable, no filtering is applied (graceful degradation).	2026-02-26 08:57:39 +01:00
maziggy	37d9b4c841	Fix manual spool weight overwritten by AMS auto-sync (#525) ... Add weight_locked flag to spools that auto-sets when weight_used is explicitly updated via the API. Both the MQTT AMS remain% auto-sync and the manual force-sync endpoint skip locked spools. Usage tracker delta tracking is unaffected. Users can re-enable AMS sync by setting weight_locked to false.	2026-02-26 08:42:19 +01:00
maziggy	fa87e24968	Add print metadata to queue API response (#524) ... Queue endpoints now return filament_type, filament_color, layer_height, nozzle_diameter, and sliced_for_model from the archive or library file. Previously this data was only available via the archive API.	2026-02-26 08:15:38 +01:00
maziggy	1973a5bead	Fix virtual printer queue mode not assigning printer (#518), settings text fields resetting mid-typing ... Virtual printer "print_queue" mode created queue items with no printer assignment. Now sets target_model from the VP's SSDP model code (e.g. P1S, X1C) for "Any Printer" scheduling, or uses target_printer_id if configured. Settings page auto-save onSuccess overwrote localSettings with the server response, discarding characters typed during the save request. Removed the stale state overwrite so in-progress input is preserved.	2026-02-26 08:06:56 +01:00
maziggy	c770f842f2	Fix "Queue to Any Printer" ignoring filament color override (#486) ... When scheduling a print to "any printer" with a filament color override, the scheduler picked a printer with the correct filament type but wrong color. _find_idle_printer_for_model() used color matching only for ranking candidates, not filtering — a printer with 0 color matches was still selected if it had the right types. Now requires at least 1 color match when filament overrides specify colors. Printers with 0 matches are skipped and reported in the "waiting for filament" reason instead of being treated as candidates.	2026-02-26 07:44:43 +01:00
maziggy	6317e7adce	Updated README	2026-02-26 07:26:35 +01:00
MartinNYHC	3c86bdd27f	Merge pull request #517 from maziggy/maziggy-patch-1 ... Make version check mandatory in bug report template	2026-02-24 17:50:36 +01:00
MartinNYHC	18f43e46ac	Make version check mandatory in bug report template	2026-02-24 17:50:20 +01:00
MartinNYHC	a6a01eb11b	Merge pull request #516 from maziggy/maziggy-patch-1 ... Make 'latest version' field required in bug report	2026-02-24 17:49:36 +01:00
MartinNYHC	a5ccdf561a	Make 'latest version' field required in bug report	2026-02-24 17:49:20 +01:00
maziggy	8e39b12c5d	Updated .github/ISSUE_TEMPLATE/bug_report.yml	2026-02-24 16:49:32 +01:00
maziggy	60f1be8935	Updated .github/ISSUE_TEMPLATE/bug_report.yml	2026-02-24 16:49:13 +01:00
maziggy	59be1b0d4d	Updated .github/ISSUE_TEMPLATE/bug_report.yml	2026-02-24 16:48:12 +01:00