mirror of https://github.com/pikvm/pikvm.git
25 lines
1.0 KiB
Markdown
25 lines
1.0 KiB
Markdown
---
|
|
title: Configure DIP switches
|
|
description: How to configure DIP switches on PiKVM V4 Mini and Plus
|
|
---
|
|
|
|
# Configure DIP switches
|
|
|
|
PiKVM V4 Mini and Plus have a pair of dual in-line package (DIP) switches on the right side to control low-level settings of the Pi board.
|
|
|
|
|
|
|
|
The left switch **[1]**:
|
|
: When pulled down (**ON** state), the advanced backpower protection is used. On the default state is **OFF** (up), "diode protection" is used. This is required for debugging at the request of technical support. Under normal conditions, it is not necessary to change the mode.
|
|
|
|
The right switch **[2]**:
|
|
: When pulled down (**ON** state), the Power Delivery chip is activated on the USB OTG port. The default state is **OFF** (up).
|
|
|
|
To change the position of switches:
|
|
|
|
1. Turn the PiKVM off.
|
|
2. Change the position of the switched.
|
|
3. Turn the PiKVM on.
|
|
|
|
!!! warning
|
|
Do not do that change the state of the DIP switched while the device is turned on. **This may cause irreparable damage.** |