mirror of https://github.com/pikvm/pikvm.git
1.9 KiB
1.9 KiB
Pi-KVM v3.3 Plastic Case for 3D printing
When printing the case, you can choose the following options:
- The presence or absence of an OLED screen (used to display the IP address and other information).
- The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).
The case consists of several parts. TODO
добавить ссылки на запчасти https://www.pishop.us/product/5v-cooling-fan/
для всех случаев 6.2 2штуки
для аума по штуке 1мм и 2мм
без аума 2мм 2шт
остальное по 1 шт
Buy options
- Small 5v fan strongly recommended to avoid overheating in the case.
- I2C OLED screen.
The front part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The front part of the case WITHOUT a hole for the OLED |
 |
The front part of the case with a hole for installing the OLED |
The back part
Choose ONE of them.
| Variant | Description |
|---|---|
 |
The back part of the case WITHOUT AUM holes |
 |
The back part of the case for installing the AUM |
Spacers
| Type | Description |
|---|---|
 |
6.2mm spacer, required TWO pieces |
 |
2mm spacer required TWO for AUM or ONE without AUM |
 |
1mm spacer required ONE for AUM only |
 |
Low spacer required ONE |