v3.3 case

pages/3d_printing.md

@@ -12,4 +12,5 @@
 | https://www.thingiverse.com/thing:4915627 | ZeroW + CSI case |
 
 # V3 cases
+* [v3.3 (Kickstarter) model](../stl/v3.3/README.md)
 * [v3.2 model](../stl/v3.2/README.md)

pages/v3.md

@@ -39,7 +39,7 @@ To use Pi-KVM v3, you will need the following things, which are NOT included in
 </details>
    
 # Installation
-0. Print [a plastic case](../stl/v3.2/README.md) if you want it
+0. Print a plastic case if you want it ([v3.3](../stl/v3.3/README.md) for the Kickstarter model, [v3.2](../stl/v3.2/README.md) for the pre-release).
 1. Build the device:
     * [Device with or without the 3D-printed case](https://www.youtube.com/watch?v=-SRL92VJ870)
     * [With the metal case](https://www.youtube.com/watch?v=jdqiwHKQcD4) (+ [AUM option](https://youtu.be/GGMufHuqyp0))

stl/v3.2/README.md

@@ -4,7 +4,7 @@ When printing the case, you can choose the following options:
 - The presence or absence of holes for the AUM v3.3 (Advanced USB Module, most likely you don't have it).
 
 ## Buy options
-* [Small 5v fan](https://www.pishop.us/product/5v-cooling-fan) **strongly recommended** to avoid overheating in the case.
+* [Small 5v fan](https://www.amazon.com/GeeekPi-Raspberry-30x30x7mm-Brushless-Retroflag/dp/B07C9C99RM) **strongly recommended** to avoid overheating in the case.
 * [I2C OLED screen](https://www.amazon.com/Pieces-Display-Module-SSD1306-Screen/dp/B08TLXYKS6).
 
 ## Building

stl/v3.3/README.md

@@ -0,0 +1,29 @@
+# Pi-KVM v3.3 Plastic Case for 3D printing
+When printing the case, you can choose the following options:
+- The presence or absence of an OLED screen (used to display the IP address and other information).
+
+## Buy options
+* [Small 5v fan](https://www.amazon.com/GeeekPi-Raspberry-30x30x7mm-Brushless-Retroflag/dp/B07C9C99RM) **strongly recommended** to avoid overheating in the case.
+* [I2C OLED screen](https://www.amazon.com/Pieces-Display-Module-SSD1306-Screen/dp/B08TLXYKS6).
+
+## Building
+See [this](https://www.youtube.com/watch?v=-SRL92VJ870) video.
+
+# The front part
+**Choose ONE of them.**
+| Variant | Description |
+|---------|-------------|
+| <img src="case_a_no_oled.png" width=200 /> | [The front part](case_a_no_oled.stl) of the case **WITHOUT a hole** for the OLED |
+| <img src="case_a.png" width=200 /> | [The front part](case_a.stl) of the case with a hole **for installing the OLED** |
+
+# The back part
+| Variant | Description |
+|---------|-------------|
+| <img src="case_b.png" width=200 /> | [The back part](case_b.stl) of the case **for installing the AUM** |
+
+# Spacers
+| Type | Description |
+|------|-------------|
+| <img src="spacer_6.2mm.png" width=200 /> | [6.2mm spacer](spacer_6.2mm.stl), required **TWO** pieces |
+| <img src="spacer_1mm.png" width=200 /> | [1mm spacer](spacer_1mm.stl) required **TWO** pieces |
+| <img src="low_spacer.png" width=200 /> | [Low spacer](low_spacer.stl) required **ONE** piece |