mirror of
https://github.com/maziggy/bambuddy.git
synced 2026-10-03 12:46:49 +02:00
maziggy
b069b5217c
OrcaSlicer's "Send job" flow sat on "Synchronizing device information…"
until it gave up, even though FTP upload worked when the user clicked
"Send job anyway". The virtual printer's MQTT server gated all incoming
command handling on `f"device/{self.serial}/request" in topic` — if the
slicer's cached serial for the VP didn't exactly equal the VP's computed
self.serial (model prefix + per-VP serial_suffix), every get_version,
pushall, and project_file publish was silently dropped. Nothing was
logged past the initial "MQTT publish to …" line, so the slicer never
received a push_status or get_version response on its subscribed
device/{serial}/report topic and hit its sync timeout. Responses were
also unconditionally published on device/{self.serial}/report, so even
when the inbound check happened to pass, replies targeted a topic the
slicer wasn't listening on if its serial had drifted.
Both directions are now serial-adaptive:
- `_handle_publish` accepts any authenticated publish on a
`device/*/request` topic and extracts the serial from the topic itself
rather than comparing against self.serial.
- A per-connection `_client_serials` dict tracks the serial the slicer
actually uses, populated from the first SUBSCRIBE or PUBLISH seen on
each connection and cleared on disconnect/stop.
- `_send_status_report`, `_send_version_response`, `_send_print_response`
now take an optional `serial` parameter (defaulting to self.serial)
so every outgoing publish — including the periodic 1-second status
push — targets the topic the slicer subscribed to.
- The version response's embedded `module[].sn` fields now also carry
the client's serial so the payload is internally consistent with the
topic.
- When the client's serial differs from self.serial an INFO log records
the adaptation so it's visible in future support bundles.
The working case (slicer's cached serial equals self.serial, as in my
own H2D-1 Proxy setup) is bit-for-bit identical to the old behavior —
the new check is strictly more permissive and only affects cases the
old code silently dropped.
Regression tests cover:
- `_extract_serial_from_topic` valid/invalid topic shapes
- mismatched-serial publish → handler runs, response topic and sn field
both use the client's serial
- non-`/request` topics → still rejected
- pushall → status_report routed to the client's subscribed topic
- `_client_serials` cleared on stop()
Bambuddy
Self-hosted print archive and management system for Bambu Lab 3D printers
Features • Screenshots • Quick Start • Documentation • Discord • Contributing
🌐 NEW: Remote Printing with Proxy Mode
Print from anywhere in the world — Bambuddy's new Proxy Mode acts as a secure relay between your slicer and printer:
- 🔒 End-to-end TLS encryption — FTP, file transfer, and camera are transparently proxied with the printer's real TLS certificate
- 🛡️ VPN recommended — Use Tailscale/WireGuard for full data encryption (details)
- 🌍 No cloud dependency — Direct connection through your own Bambuddy server
- 🔑 Uses printer's access code — No additional credentials needed
- ⚡ Full-speed printing — Transparent TCP proxy, only MQTT is decrypted for IP rewriting
Perfect for remote print farms, traveling makers, or accessing your home printer from work.
Why Bambuddy?
- Own your data — All print history stored locally, no cloud dependency
- Works offline — Uses Developer Mode for direct printer control via local network
- Full automation — Schedule prints, auto power-off, get notified when done
- Multi-printer support — Manage your entire print farm from one interface
✨ Features
📦 Print Archive
📊 Monitoring & Control
⏰ Scheduling & Automation
📁 File Manager (Library)
📁 Projects
|
🔔 Notifications
🧵 Spool Inventory
🔧 Integrations
🖨️ Virtual Printer & Remote Printing
🛠️ Maintenance & Support
🔒 Optional Authentication
|
Plus: Configurable slicer (Bambu Studio / OrcaSlicer) • Customizable themes (style, background, accent) • Mobile responsive • Keyboard shortcuts • Multi-language (EN/DE/JA/IT) • Auto updates • Database backup/restore • System info dashboard
🎬 Demo
Click to watch the demo on YouTube
📸 Screenshots
Click to expand screenshots
Real-time printer monitoring with AMS status
Print archive with 3D preview and project assignment
Re-print with AMS filament mapping preview
Built-in timelapse editor with trim, speed, and music
Group related prints into projects
Project detail view with assigned archives
Project timeline and print history
Print scheduling and queue management
Schedule prints for specific date and time
Customizable statistics dashboard
Maintenance tracking per printer
Configure maintenance types and intervals
Bambu Cloud filament profiles
Edit filament preset settings
Pressure advance (K-factor) profiles
Edit K-factor profile settings
General configuration and integrations
Smart plug control and energy monitoring
Multi-provider notification system
API keys and webhook endpoints
Virtual printer configuration
Virtual printer appears in Bambu Studio/Orca Slicer
MQTT debug logging for troubleshooting
Quick power plug control in sidebar
🚀 Quick Start
Requirements
- Python 3.10+ (3.11/3.12 recommended)
- Bambu Lab printer with Developer Mode enabled (see below)
- "Store sent files on external storage" enabled in Bambu Studio/OrcaSlicer
- Same local network as printer
Installation
Docker (Recommended)
Option A: Pre-built image (fastest)
mkdir bambuddy && cd bambuddy
curl -O https://raw.githubusercontent.com/maziggy/bambuddy/main/docker-compose.yml
docker compose up -d
Option B: Build from source
git clone https://github.com/maziggy/bambuddy.git
cd bambuddy
docker compose up -d --build
Open http://localhost:8000 in your browser.
Multi-architecture support: Pre-built images are available for
linux/amd64andlinux/arm64(Raspberry Pi 4/5).
macOS/Windows users: Docker Desktop doesn't support
network_mode: host. Edit docker-compose.yml: comment outnetwork_mode: hostand uncomment theports:section. Printer discovery won't work - add printers manually by IP.
Linux users: If you get "permission denied" errors, either prefix commands with
sudo(e.g.,sudo docker compose up -d) or add your user to the docker group.
Docker Configuration & Commands
Environment Variables:
| Variable | Default | Description |
|---|---|---|
TZ |
UTC |
Your timezone (e.g., America/New_York, Europe/Berlin) |
PORT |
8000 |
Port BamBuddy runs on (with host networking mode) |
DEBUG |
false |
Enable debug logging |
LOG_LEVEL |
INFO |
Log level: DEBUG, INFO, WARNING, ERROR |
Data Persistence:
| Volume | Purpose |
|---|---|
bambuddy.db |
SQLite database with all your print data (not used with PostgreSQL) |
archive/ |
Archived 3MF files and thumbnails |
logs/ |
Application logs |
Updating:
# Pre-built image: just pull the latest
docker compose pull && docker compose up -d
# From source: rebuild after pulling changes
cd bambuddy && git pull && docker compose up -d --build
Daily Beta Builds:
Beta builds with the latest fixes are pushed regularly to the same beta version tag:
# Pull the current beta
docker pull ghcr.io/maziggy/bambuddy:0.2.2b1
# or from Docker Hub
docker pull maziggy/bambuddy:0.2.2b1
Use Watchtower to automatically update when new daily builds are pushed.
Note: Beta builds use version tags like
0.2.2b1— they are never tagged aslatest. Your stable installation won't auto-update to a beta unless you explicitly pull a beta tag.
Useful Commands:
# View logs
docker compose logs -f
# Stop/Start
docker compose down
docker compose up -d
# Shell access
docker compose exec bambuddy /bin/bash
Custom Port:
ports:
- "3000:8000" # Access on port 3000
Reverse Proxy (Nginx):
server {
listen 443 ssl http2;
server_name bambuddy.yourdomain.com;
ssl_certificate /path/to/cert.pem;
ssl_certificate_key /path/to/key.pem;
location / {
proxy_pass http://localhost:8000;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
proxy_read_timeout 86400;
}
}
Note: WebSocket support is required for real-time printer updates.
Network Mode Host (required for printer discovery and camera streaming):
services:
bambuddy:
build: .
network_mode: host
Note: Docker's default bridge networking cannot receive SSDP multicast packets for automatic printer discovery. When using
network_mode: host, Bambuddy auto-detects your network subnet and can discover printers via subnet scanning in the Add Printer dialog.
Manual Installation (Linux/macOS)
# Clone and setup
git clone https://github.com/maziggy/bambuddy.git
cd bambuddy
python3 -m venv venv
source venv/bin/activate
pip install -r requirements.txt
# Run
uvicorn backend.app.main:app --host 0.0.0.0 --port 8000
Open http://localhost:8000 and add your printer!
Need detailed instructions? See the Installation Guide
Enabling Developer Mode
Developer Mode allows third-party software like Bambuddy to control your printer over the local network.
- On printer: Settings → Network → LAN Only Mode → Enable
- Enable Developer Mode (appears after LAN Only Mode is enabled)
- Note the Access Code displayed
- Find IP address in network settings
- Find Serial Number in device info
Note: Developer Mode disables cloud features but provides full local control. Standard LAN Mode (without Developer Mode) only allows read-only monitoring.
Slicer Settings
In Bambu Studio or OrcaSlicer, enable "Store sent files on external storage" so that print files (3MF) are saved to the printer's SD card. Bambuddy needs these files to extract thumbnails and 3D model previews.
- Open Bambu Studio or OrcaSlicer
- Go to the Device tab for your printer
- In Print Options, enable Store Sent Files on External Storage
📚 Documentation
Full documentation available at wiki.bambuddy.cool:
- Installation — All installation methods
- Getting Started — First printer setup
- Features — Detailed feature guides
- Troubleshooting — Common issues & solutions
- API Reference — REST API documentation
🖨️ Supported Printers
| Series | Models |
|---|---|
| X1 | X1, X1 Carbon, X1E |
| H2 | H2D, H2D Pro, H2C, H2S |
| P1 | P1P, P1S |
| P2 | P2S |
| A1 | A1, A1 Mini |
🛠️ Tech Stack
| Component | Technology |
|---|---|
| Backend | Python, FastAPI, SQLAlchemy |
| Frontend | React, TypeScript, Tailwind CSS |
| Database | SQLite (default) or PostgreSQL |
| 3D Viewer | Three.js |
| Communication | MQTT (TLS), FTPS |
🤝 Contributing
Contributions welcome! Here's how to help:
- Test — Report issues with your printer model
- Translate — Add new languages
- Code — Submit PRs for bugs or features
- Document — Improve wiki and guides
# Development setup
git clone https://github.com/maziggy/bambuddy.git
cd bambuddy
# Backend
python3 -m venv venv && source venv/bin/activate
pip install -r requirements.txt
DEBUG=true uvicorn backend.app.main:app --reload
# Frontend (separate terminal)
cd frontend && npm install && npm run dev
See CONTRIBUTING.md for guidelines.
📄 License
AGPL-3.0 License — see LICENSE for details.
🙏 Acknowledgments
- SpoolEase by yanshay — early inspiration for NFC-based spool tracking and AMS inventory concepts
- Bambu Lab for amazing printers
- The reverse engineering community for protocol documentation
- All testers and contributors
If you like Bambuddy and want to support it, you can buy Martin a coffee.
Made with ❤️ for the 3D printing community
Join our Discord •
Report Bug •
Request Feature •
Documentation