In Spoolman mode, Assign Spool and Add to Inventory on the SpoolBuddy
kiosk took the tag UID from the live reader state, which is cleared when
the spool leaves the reader. Lifting it while a dialog was open made the
link fail, and quick-add left an untagged spool behind. Use the tag on
the card, as local inventory already does.
The daemon took tray_uuid from tag blocks 4-5, which hold the filament
type, so every spool of one type sent the same value and the kiosk never
saved it. Read block 9, which both tags of a spool share and the AMS
reports as tray_uuid. Save it on kiosk quick-add and link in local and
Spoolman mode, and give spools added before the fix their tray_uuid when
their exact tag UID is scanned again. Drop any tray_uuid that is not a v4
UUID, so daemons that are not updated yet keep matching by tag UID.
Block 9 read based on #1200 by @Keybored02.
Co-Authored-By: Keybored02 <Keybored02@users.noreply.github.com>
After an RTSP session dropped, ffmpeg could keep writing the same JPEG
indefinitely with no connection to the printer left (two hours at ~29 fps
on a P2S), and every check that counts frames saw a healthy stream. The
stream now restarts ffmpeg after 20 s without a changed frame, on the
existing reconnect path, while viewers stay attached. If the first frame
after the restart is the same picture again, the camera really shows a
still scene (a dark, idle chamber): it is then only re-checked every
5 minutes until the picture changes.
OrcaSlicer's Sync filaments finds a slot's preset by the slot's filament
ID alone. The Configure dialog looked up an Orca profile's ID in the
browser and quietly sent the generic for the material when that came back
empty, so Orca custom filaments reached the slicer as Generic and the log
showed nothing. configure now resolves the ID on the server from
orca_profile_id, follows inherits to the parent profile or the Bambu
filament it was copied from, logs the outcome and reports a fallback,
which the dialog shows as a warning.
Slot presets also store the filament ID they were written with, so the
slot card and the Configure dialog stop showing a preset once the slot is
changed from OrcaSlicer's Device tab or the printer.
Re-configuring a slot for another filament no longer carries over the old
filament's active K-profile, which switched the slot back to the old
filament.
The File Manager and G-code viewer were sized to 100vh-64px on lg+,
subtracting a top bar that only exists in the compact layout, which
left a 64px empty band under both pages. Use lg:h-screen instead.
The frame an external link opens in can't navigate the Bambuddy
window, so links like Bambuddy Orders' "In Bambuddy" did nothing.
The framed page can now post bambuddy:navigate with a path; it is
accepted only from the frame, from the link's origin, and for a path
inside Bambuddy. The theme message announces canNavigate.
After an RTSP session dropped, ffmpeg could keep writing the same JPEG
indefinitely with no connection to the printer left (two hours at ~29 fps
on a P2S), and every check that counts frames saw a healthy stream. The
stream now restarts ffmpeg after 20 s without a changed frame, on the
existing reconnect path, while viewers stay attached. If the first frame
after the restart is the same picture again, the camera really shows a
still scene (a dark, idle chamber): it is then only re-checked every
5 minutes until the picture changes.
OrcaSlicer's Sync filaments finds a slot's preset by the slot's filament
ID alone. The Configure dialog looked up an Orca profile's ID in the
browser and quietly sent the generic for the material when that came back
empty, so Orca custom filaments reached the slicer as Generic and the log
showed nothing. configure now resolves the ID on the server from
orca_profile_id, follows inherits to the parent profile or the Bambu
filament it was copied from, logs the outcome and reports a fallback,
which the dialog shows as a warning.
Slot presets also store the filament ID they were written with, so the
slot card and the Configure dialog stop showing a preset once the slot is
changed from OrcaSlicer's Device tab or the printer.
Re-configuring a slot for another filament no longer carries over the old
filament's active K-profile, which switched the slot back to the old
filament.
The File Manager and G-code viewer were sized to 100vh-64px on lg+,
subtracting a top bar that only exists in the compact layout, which
left a 64px empty band under both pages. Use lg:h-screen instead.
maziggy