All filament mapping dropdowns (single-printer, multi-printer, and
"Print to Any" model-based) showed only the base material type (e.g.
"PLA") without distinguishing subtypes like "PLA Basic" vs "PLA Matte",
making entries with different subtypes but same color look identical.
Backend: Add tray_sub_brands to available-filaments response and include
it in the dedup key so different subtypes of the same color appear as
separate entries.
Frontend: Show tray_sub_brands in FilamentMapping, FilamentOverride, and
PrinterSelector dropdowns, falling back to base type when unset. Add
traySubBrands field to LoadedFilament interface.
Multi-plate 3MF files can now be queued in one action via a "Queue All
Plates" toggle in the plate selector (add-to-queue mode only). Each
plate becomes a separate queue entry, individually editable.
Fix: "Clear Plate & Start Next" no longer appears when all pending
queue items are staged (manual_start). The prompt only shows when
there are auto-dispatchable items the scheduler will actually start.
Virtual printers in Queue mode now have an "Auto-dispatch" setting.
When enabled (default), prints start automatically — preserving current
behavior. When disabled, prints are added with manual_start so they
wait for manual dispatch from the queue UI.
home_flag bit 18 was incorrectly interpreted as "wired/ethernet
connection", causing the ethernet badge to always show — even on
printers without an ethernet port (e.g. A1, P1S). This hid the
WiFi signal indicator entirely.
Removed the wired_network field and ethernet badge UI. The WiFi
signal badge now shows correctly whenever the printer reports
signal strength.
home_flag bit 18 was incorrectly interpreted as "wired/ethernet
connection", causing the ethernet badge to always show — even on
printers without an ethernet port (e.g. A1, P1S). This hid the
WiFi signal indicator entirely.
Removed the wired_network field and ethernet badge UI. The WiFi
signal badge now shows correctly whenever the printer reports
signal strength.
* Added "Force Color Match" feature to filament override
* Update settings.py
* Update settings.py
* Label updates for warnings and checkbox case
* Initial plan
* Add noMatchingMaterial i18n translations to all 7 locale files
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Use {{material}} interpolation in noMatchingMaterial; populate from filament_overrides with getColorName
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Updates for PR#625 comments
* Added "Force Color Match" feature to filament override
* Update settings.py
* Update settings.py
* Label updates for warnings and checkbox case
* Initial plan
* Add noMatchingMaterial i18n translations to all 7 locale files
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Use {{material}} interpolation in noMatchingMaterial; populate from filament_overrides with getColorName
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Updates to PrintersPage and QueuePage
* Update QueuePage.tsx
* Rebase to 0.2.2b3
* Fix compile errors with FilamentOverride
* Updates for PR#625 comments
https://github.com/maziggy/bambuddy/pull/625#pullrequestreview-3908738261
* Fix force color match default, loadedFilamentTypes bug, remove dead translations
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
Co-authored-by: MartinNYHC <mz@v8w.de>
All filament mapping dropdowns (single-printer, multi-printer, and
"Print to Any" model-based) showed only the base material type (e.g.
"PLA") without distinguishing subtypes like "PLA Basic" vs "PLA Matte",
making entries with different subtypes but same color look identical.
Backend: Add tray_sub_brands to available-filaments response and include
it in the dedup key so different subtypes of the same color appear as
separate entries.
Frontend: Show tray_sub_brands in FilamentMapping, FilamentOverride, and
PrinterSelector dropdowns, falling back to base type when unset. Add
traySubBrands field to LoadedFilament interface.
Multi-plate 3MF files can now be queued in one action via a "Queue All
Plates" toggle in the plate selector (add-to-queue mode only). Each
plate becomes a separate queue entry, individually editable.
Fix: "Clear Plate & Start Next" no longer appears when all pending
queue items are staged (manual_start). The prompt only shows when
there are auto-dispatchable items the scheduler will actually start.
Virtual printers in Queue mode now have an "Auto-dispatch" setting.
When enabled (default), prints start automatically — preserving current
behavior. When disabled, prints are added with manual_start so they
wait for manual dispatch from the queue UI.
The FTP upload skipped reading the server's "Transfer complete"
confirmation, sending the print command before the file was flushed
to the SD card. Now waits for the 226 response with a 60s timeout.
Checkbox selection + "Delete Selected" button in Settings > Filament
for both Spool Catalog and Color Catalog. Adds POST bulk-delete
endpoints and translations for all 7 locales.
P2S uses hardened steel rods, not carbon fiber. Move P2S from
carbon rod classification to new steel_rod category with its own
"Lubricate Steel Rods" / "Clean Steel Rods" maintenance tasks.
Add {eta} template variable showing wall-clock completion time
(e.g. "15:53" or "3:53 PM") to print_start, print_progress, and
queue_job_started notifications. Respects the user's time_format
setting (12h/24h). The existing {estimated_time} variable continues
to show duration ("1h 23m").
visibility into AMS spool assignments on printer cards without exposing
the full Inventory page (#635). The list_assignments endpoint now
requires this new permission instead of inventory:read. All default
groups (Administrators, Operators, Viewers) include it for backward
compatibility.
Closes#634
The print dispatch progress toast stayed visible forever after the
second print in a session. lastDispatchSummaryRef was never reset
between batches — every single-printer dispatch produced the same
summary key ("first-complete:1:0"), so subsequent completions matched
the stale ref and skipped creating the done toast.
Reset the dedup guard when the dispatch toast is dismissed and when
a new batch starts.
The print dispatch notification disappeared instantly for small files or
closed immediately when the progress bar reached 100%, giving no
confirmation that the job was submitted. The dispatch toast now stays
visible for 3 seconds showing the completion message before auto-
dismissing. For very fast uploads where no progress toast was shown,
a fresh confirmation toast is created instead.
When printing from the file manager, the print modal showed all printers
including busy ones. Selecting a busy printer resulted in a failed send.
The printer selector now fetches live status for each printer and shows
state badges (Idle, Printing, Paused, etc.). In reprint mode, non-available
printers (anything other than IDLE, FINISH, FAILED) are grayed out and
not selectable. "Select all" skips them. Queue/edit modes still allow
selecting busy printers since the job will wait.
Resize PWA icons to match their declared dimensions (192x192, 512x512,
180x180), split discouraged "any maskable" icon purpose, and add mobile
and desktop screenshots to manifest.json for Chrome's richer install UI.
Files added to a project from the archive (status="archived") were
incorrectly counted in completed_prints and parts_progress stats.
Only status="completed" (actually printed) now counts toward completion.
Replace all hardcoded English strings with t() translation calls across
9 components: SettingsPage, SmartPlugCard, AddSmartPlugModal,
SwitchbarPopover, NotificationProviderCard, AddNotificationModal,
NotificationTemplateEditor, NotificationLogViewer, GitHubBackupSettings,
and RestoreModal. Add ~600 new translation keys to all 7 locales
(en, de, ja, fr, it, pt-BR, zh-CN).
All filament mapping dropdowns (single-printer, multi-printer, and
"Print to Any" model-based) showed only the base material type (e.g.
"PLA") without distinguishing subtypes like "PLA Basic" vs "PLA Matte",
making entries with different subtypes but same color look identical.
Backend: Add tray_sub_brands to available-filaments response and include
it in the dedup key so different subtypes of the same color appear as
separate entries.
Frontend: Show tray_sub_brands in FilamentMapping, FilamentOverride, and
PrinterSelector dropdowns, falling back to base type when unset. Add
traySubBrands field to LoadedFilament interface.
Sync all locale files to match EN's 3,054-key structure:
- it: add 485 missing keys, remove 1 stale key
- pt-BR: add 51 missing keys, remove 10 stale keys
- fr: add 47 missing keys
- ja: add 47 missing keys, remove 116 stale keys
- zh-CN: add 25 missing keys, remove 1 stale key
All 655 new keys are properly translated.
Stale keys from past refactors are cleaned up (127 total removed).
The per-printer InlineMappingEditor showed filaments from both nozzles
on H2D printers. The single-printer FilamentMapping dropdown was fixed
in 29e9593 but the multi-printer code path was missed. Added nozzle_id
filtering to both auto-match logic and dropdown options via shared
autoMatchFilament() and filterFilamentsByNozzle() functions in
amsHelpers.ts, with 10 regression tests.
Two lazy-load bugs caused greenlet_spawn errors in the RFID auto-assign
flow:
1. create_spool_from_tray set spool.k_profiles=[] AFTER db.flush(),
but assigning to a relationship on a persistent object triggers a
lazy load (SQLAlchemy loads the current collection before replacing).
Moved initialization to BEFORE db.add().
2. spool.assignments was never initialized or eagerly loaded, so
db.add(SpoolAssignment) triggered a back_populates lazy load
outside the async greenlet. Added assignments=[] in create and
selectinload(Spool.assignments) in get_spool_by_tag.
Also added exc_info=True to error handlers for full tracebacks, and
19 new tests including greenlet regression tests that reproduce the
exact failure.
The install script hardcoded origin/main, so beta testers told to
install from a dev branch silently got the stable release instead.
Add a --branch CLI option and interactive prompt (defaults to main).
Invalid branch names are validated via git ls-remote before any work
is done, showing available branches on failure.
The install script hardcoded origin/main, so beta testers told to
install from a dev branch silently got the stable release instead.
Add a --branch CLI option and interactive prompt (defaults to main).
Fresh installs use git clone --branch, existing installs checkout
and reset to the selected branch.
enum.StrEnum was added in Python 3.11, but the documented minimum is
3.10. Add a compatibility shim in backend/app/core/compat.py that falls
back to (str, Enum) on older versions. Updated all 5 import sites and
lowered pyproject.toml target-version to py310.
Bambu printers only support plain RSA key exchange ciphers
(AES256-GCM-SHA384, AES128-GCM-SHA256), but Python's OpenSSL 3.x
defaults exclude them in favor of forward-secrecy (ECDHE/DHE) only.
Add the RSA ciphers to the client SSL context so the TLS proxy can
connect to the printer's bind port (3002).
Move the toast container from bottom-4 to bottom-20 so toast
notifications and upload progress stack above the bug report bubble
instead of rendering on top of each other.
When the print queue scheduler finds pending items but doesn't start
any, there was no logging to explain why. Added INFO-level summary
after each queue check showing skip reasons (manual_start,
scheduled_future) and busy printer details (state, connected,
plate_cleared). Also added DEBUG-level logging in _is_printer_idle()
for the specific condition that failed.
- Add 12 backend integration tests for AMS labels API (GET/PUT/DELETE,
serial resolution, synthetic key fallback, whitespace handling, validation)
- Add 10 frontend tests for FilamentSlotCircle component (rendering,
border styles, background colors, text contrast inversion)
- Fix ruff W293 trailing whitespace in inventory.py from contributor fix
- Add ams_label model import to test conftest.py
- Update CHANGELOG, README, website features page, and wiki AMS docs
* AMS Labels addition to PrintersPage
* Added database reinitialization for schema migrations on database restore
* Bug fixes and AMS Label persistence updates
* Update database.py to resolve PR conflicts
* PR Comment Resolution
* Resolve conflicts in database.py for PR#570
* Updates to address PR#570 additional comments
* Optimize visibility handling for popup component
* Improve serial key handling in printers.py
Refactor serial key assignment to handle empty AMS serial gracefully.
* Implement error handling in serial number mapping
Add error handling for serial number mapping.
* Add migration to drop old ams_labels table
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
On Windows, process.terminate() on ffmpeg broadcasts CTRL_C_EVENT to
the entire process group, causing uvicorn to shut down. Spawn ffmpeg
with CREATE_NEW_PROCESS_GROUP so cleanup doesn't affect the server.
maziggy