Subprocess output and user-supplied URLs are scrubbed of credentials
before they reach the application log. Adds a shared redaction helper in
core/logging_filters and routes the existing support-bundle sanitizer
through the same pattern.
Timelapse was on, the video never reached the archive, and Scan for Timelapse
found nothing afterwards. Across 247 support bundles this was the norm, not an
edge case: 457 automatic scans scheduled, 262 attached.
The scan looked four times over ~65s. The attempt that found the video was #1
272 times, then 17 / 13 / 13 — flat against the cutoff, not decaying, i.e.
files were still arriving when we stopped. What ran afterwards searched for the
print name inside the filename; Bambu only writes "video_<timestamp>", so it
fired 159 times and matched zero.
The manual Scan had no baseline at all and matched on filename timestamp, FTP
mtime, or "there is only one video" — all reading a clock a LAN-only printer
cannot sync. The reporter's P1S was six and a half days out.
- Poll for minutes instead of ~65s; drop the name-match fallback.
- Persist the print-start baseline on the archive, so the diff survives a
restart mid-print and the manual Scan runs the same comparison. With a
baseline present the clock-based strategies are skipped entirely — they can
only turn an honest "pick one" into a confident wrong answer.
- When several files are new (a previous print's video landing late), exclude
the ones already attached to another archive instead of ordering the
candidates. Ordering could only be done on the printer's clock.
- Delete the video from the printer once archived. Keeps /timelapse to
unclaimed files, which is what makes the diff unambiguous, and stops P1S
cards filling with AVIs.
- Gate that delete on a verified transfer: download_file now compares against
the size from the listing. An FTPS connection closing early does not always
raise, so a partial buffer was being attached as a complete video — which
would also have been the one case where deleting the source lost data.
Bounded twice on purpose: wall-clock deadline plus a derived round cap, since
the deadline stops bounding the loop as soon as the sleeps are shortened.
Per-round logging only speaks when the listing changed — 31 rounds of full
listings would bury the interesting line in the support bundle.
Migration adds print_archives.timelapse_baseline as JSON, spelled the same on
both dialects so a migrated database matches a fresh one.
-----------
fix(finish-photo): add the timelapse frame to the archive after the notification (#2704)
When a print records a timelapse, its last frame is the better finish photo:
the firmware stops recording with the toolhead parked and before the end
G-code drops the bed, where a live grab at that moment catches a lowered
plate. Bambuddy waited 60s for the video and then gave up, because the
print-complete notification blocks on that photo and holding a notification
for minutes is worse than sending it with the live grab.
P1-series printers write MJPEG AVI rather than H.264 MP4 and serve it slowly.
Measured over 261 attaches in the support bundles: P1S median 33s, p90 167s,
worst 546s, while every other model finished inside 26s. So the printers that
most needed the better framing were the ones that never got it.
Keep the notification on the same bound, and keep waiting off to the side.
_capture_finish_photo_from_timelapse now reports whether it ran out of time or
concluded — a video that landed and failed extraction is not worth retrying,
one that never arrived is. On the first, schedule a background task that waits
up to 15 minutes and inserts the extracted frame at the front of the archive's
photo list, where the gallery opens.
The live grab stays on disk: the notification already links to that exact
file, so removing it would leave a broken image in Discord or Telegram.
The length check proves we received what the listing said, not that the file
was finished. The first look happens ~5s after the print ends, while the
printer may still be writing, so a growing file can be listed short, served
short, and pass. Re-list after the download and only accept the video once its
size has stopped changing — a failed re-list counts as not settled, since
"could not check" must not mean "safe to delete".
The finish photo needs a "printing done, toolhead parked, filament unload
not started" moment. stg_cur=22 was meant to be it (#1721) and fires on no
model in the field: across 247 support bundles there is not one
FINISH PHOTO MOMENT (stage-22), including the 2026-06-13..07-08 window where
it was the only pre-FINISH trigger in the code — 104 captures on A1, A1 Mini,
H2C, H2D, P1S, P2S, X1C and X2D, all of them the FINISH fallback.
A replacement can't be designed from the bundles we have. Out of that window
Bambuddy parses only stg_cur and mc_print_sub_stage; every other stage/action
field arrives and is dropped unread. The candidates that sound right
(print_real_action, mc_action, mc_stage) are absent from A1/A1 Mini/P1S
payloads, so none of them can be the universal answer alone.
Dump the raw fields for the window between the last object layer and
gcode_state=FINISH at DEBUG. Opens on the first end-of-print signal (last
layer, progress >= 99, or no remaining time) so a dropped layer_num packet
doesn't lose it, logs only what changed frame to frame, closes on the
transition out of RUNNING, and arms once per print.
Instrumentation only: gated on DEBUG being enabled, read-only against printer
state, wrapped so it cannot break ingest, and capped at 400 frames per print.
The probed fields are stage codes, counters and bitfields — nothing
identifying, and no access code.
A printer with a wrong access code gave no explanation anywhere. The connect
callback's failure branch was a bare `state.connected = False`, discarding the
CONNACK reason code the printer had just sent, so the only trace was paho's
follow-up disconnect -- logged every 30 seconds as "rc=Unspecified error",
which is exactly what a powered-off printer produces. In the report behind this
fix one of three printers had been in that loop for the whole capture, and
neither the log nor the support bundle could say why.
Bambu speaks MQTT 3.1.1, whose CONNACK return codes 4 and 5 paho maps onto
reason codes 134 and 135. Both are now logged with the printer's own reason
string and, for those two, the remedy: the access code is regenerated whenever
LAN Only or Developer Mode is toggled, so it has to be re-read from the screen.
The access code itself is never logged -- it would land in every bundle.
The reason is kept on the client as a stable slug and plumbed through
test_connection into the connection diagnostic, which now distinguishes two
cases it previously conflated. "The printer refused our credentials" is
asserted only when the printer said so; when all Bambuddy knows is that there
is no session, the text hedges and names the alternatives (rebooting, or
already at its limit of simultaneous connections). The old wording claimed the
access code was most likely wrong in both cases.
Frontend needed no change -- ConnectionDiagnostic already renders
`<status>_<reason>` variants with fallback to the plain per-status text, so an
unrecognised slug degrades to today's wording rather than a missing key.
Every slot of the A2L's AMS Lite rendered as "?" in Bambu Studio through the
Virtual Printer while Bambuddy's own AMS card was correct, and a filament set
by hand in Studio reverted about a second later.
The A2L reports its AMS Lite as physical unit id 16 but packs the slot presence
bits at base 24, so bambu_mqtt normalises the id to 6 at the ingest boundary and
every internal reader gets the right bits. The VP bridge is not downstream of
that: BambuMQTTClient._on_message fans raw payload bytes out to raw-message
handlers before parsing, so mqtt_bridge._on_printer_raw does its own json.loads
and still holds id 16. It then called the shared apply_tray_exist_bits, which
computed 16*4 = bits 64-67 -- never set -- concluded all four slots were empty,
and wiped tray_type / tray_color / tray_info_idx / tag_uid / tray_uuid / remain
from the copy sent to the slicer. That runs on every push, which is why a manual
pick could not survive the next 1 Hz cached-as-base report.
apply_tray_exist_bits now folds the unit id through normalize_am_unit_id, so 16
and 6 land on the same bit base whichever id the caller holds. The bridge's
cached ids stay physical on purpose -- Studio addresses the Lite as 16, sending
ams_get_rfid {ams_id: 16} through the VP -- so normalising the cache instead
would have broken the slicer's own command path.
Confirmed from the reporter's debug log, which shows the cleanup clearing slots
at bits 64-67 under the VP's log label. Before #2670 added the
0 <= ams_id <= 15 range guard this wiped the slots; after it, unit 16 fell out
of the guard and the A2L got no empty-slot cleanup at all -- two different wrong
answers, both fixed here.
The Ukrainian locale was authored before #2622 landed and merged dev in
without picking up the five slice.designSettings* keys that came with it, so
check:i18n failed at 5675 leaves against en's 5680. This is invisible on the
PR because ci.yml only triggers for pull requests targeting main, and this one
targets dev - the only checks that ran were the security workflow's.
Adds the five missing keys, following the file's own convention of rendering
"designer" as "автора" as it already does in slice.useEmbeddedHint.
Two values were still English and the parity gate could not see them, because
check 4 only fires on leaves byte-identical to en: profiles.localProfiles.
pressureAdvance and inventory.paProfileTab both read "Pressure Advance (PA)"
where en has "Pressure Advance" and "PA Profile". The added "(PA)" was enough
to walk past the equality test. Both are now translated, the second as a tab
label matching the Russian. Inline mentions of the term in profiles.subtitle
and kProfilesDescription stay in English, which is what ru does too.
failureDetection.mlUrl is translated rather than allow-listed, and the dead
'{{weight}} г' entry is dropped from UK_COGNATES - that list matches against
the English value, so an entry spelled in Ukrainian could never fire, and
since the unit is now localized no entry is needed at all.
Four straight apostrophes normalized to the typographic form used by the
other 186 in the file. Locale count in the README and the two wiki pages
corrected from 11 to 13; it had already been wrong, omitting Russian.
Signing in to Bambu Cloud with an authenticator-app account failed every
time with "Invalid code", whatever the code was. Bambu Lab added double-
submit CSRF protection to the bambulab.com web origin - which is where,
and only where, this service posts the two-factor code. The endpoint
refused the request with 403 "CSRF error: missing_cookie" before it ever
evaluated the code, and Bambuddy reported that refusal as a bad code.
Verified against the live endpoint with a deliberately invalid key: a
bare POST returns missing_cookie; GET /api/csrf mints a bbl_csrf_token
cookie; a POST carrying only the cookie returns missing_header; a POST
carrying the cookie plus an x-bbl-csrf-token header reaches application
logic. Landing on the sign-in page first - the intuitive fix - does not
help, as that page sets only Cloudflare's __cf_bm. Of five header
spellings tried, only x-bbl-csrf-token is accepted, so the tests pin it.
verify_totp now performs that handshake against the same origin it will
post to (bambulab.cn for the China region - a token minted by the global
site is a cookie the .cn endpoint never issued), and declines to submit
the code at all when no token can be obtained rather than burning the
user's 30-second TOTP window on a request that is certain to be refused.
A CSRF refusal now also says the code was never checked instead of
masquerading as a wrong code, which is what sent the reporter chasing
clock drift and leading-zero parsing.
Only TOTP sign-ins were affected. Every other cloud call, the email-code
two-factor path included, goes to api.bambulab.com, which is not gated,
and existing stored tokens were unaffected throughout.
The region-routing test's MockTransport needed teaching about the
handshake: it returns one canned response for every request and set no
cookie, so the fix correctly refused to POST and the test lost the URL it
asserts on. It now mints a token for /api/csrf and additionally checks
the handshake stays on the .cn origin.
Published models often deviate from the stock Bambu profile on purpose -
five walls, 100% infill, a 0.1mm first layer. Re-slicing one for a
different printer discarded all of it: the picked process preset
overrides the file's embedded settings, and that override is precisely
what makes cross-printer re-slicing work, so it cannot just be dropped.
"Slice as designed" (#2611) does not help - it is all-or-nothing and
only offered when the picked printer already matches the design's
target.
The deviation list does not have to be computed. Bambu Studio writes it
into the 3MF as different_settings_to_system, laid out as
[process, *filaments, printer] - verified against real files at 2, 3 and
4 filament slots. The parser refuses any file whose array length
contradicts its own filament count rather than guessing an index, since
reading the printer slot as the process slot would carry the designer's
machine_start_gcode onto a foreign printer.
The slice dialog now lists exactly which print settings the author
changed and what each was set to, with a checkbox per setting. Design
intent - wall count, infill, layer and first-layer height, supports,
seam, brim, ironing - is ticked by default. Printer-specific values -
speeds, accelerations, jerk, fans, temperatures, prime-tower geometry -
are listed with a badge but start unticked: tuned for the author's
machine, they can be merely wrong on the target or outside the range its
profile accepts, which fails the slice outright.
Only ticked keys are sent, and only keys the source actually flags as
changed are applied. Values are written into the outgoing process JSON,
the same mechanism the support carry-over has used since #1881: for a
Standard preset pick that JSON is an inherits stub, so the patch is the
child in the chain and wins over the flattened parent. Process slot
only - filament picks are honoured as chosen.
The wiki's "this is not a settings merge" note under Slice as designed
described the gap this closes; rewritten to point at the new panel.
Translated in all locales; wiki updated. Covered by backend and frontend
tests.
Size S exists for one job: watching a whole fleet on a single screen. It
rendered the printer name, a status pip and a progress bar - every other
block on the card is gated behind the expanded view - so it could not
answer the question that view is for, "which printer finishes first".
Dropping to S to fit more printers meant losing the information you
dropped down to compare.
The compact card now carries one line of metrics under the progress bar
while a print is running: remaining time, ETA in the configured
12/24-hour format, and layer progress. These are the values the Medium
card already shows, rendered with the same formatters and the same ETA
styling so the two sizes read alike. Each value is omitted individually
when the printer does not report it, and the row holds its height when
nothing is printing so cards do not shift as prints start and finish.
Card dimensions and grid density are otherwise unchanged.
Frontend only. Wiki updated. Covered by tests - which required teaching
the new test file to mock localStorage.getItem, since the harness
replaces localStorage with bare vi.fn() stubs and setItem is a no-op;
without that the page falls back to its size-M default and the compact
branch never renders.
When a print reaches a terminal state Bambuddy holds the queue until
someone confirms the build plate is clear. That gate was visible only in
the Web UI: the printer's own MQTT push reports nothing beyond RUNNING,
PAUSE, FAILED, FINISH and IDLE, so an external automation could not tell
"finished" from "finished and still waiting for a human".
The per-printer status topic now carries an awaiting_plate_clear field,
and every transition is additionally published on a new retained topic,
bambuddy/printers/{serial}/plate_clear. Retained, and published from the
flag itself rather than from printer telemetry: a subscriber learns the
state of every printer the moment it connects, and the state stays
correct after Auto Off powers a printer down - telemetry stops there,
which would otherwise leave the status topic frozen at false.
Publishing is edge-triggered. The queue clears the gate on every
dispatch whether or not it was up, and no subscriber should see a
"plate cleared" for a plate that was never dirty. Persistence and the
WebSocket broadcast stay unconditional; they are idempotent and predate
this.
A matching Plate Clear Required notification event was added, off by
default on every provider because it fires after every print at the
same moment as the print-complete alert. Only the rising edge notifies.
Acknowledging still goes through POST /printers/{id}/clear-plate.
Two tests in test_printer_manager_status_broadcast.py asserted
_schedule_async.call_count == 2 for the setter. The new emission makes
it three on a transition, so they now assert that the persist and
broadcast coroutines are actually scheduled - which is the contract
Translated in all locales; wiki updated. Covered by backend and
frontend tests.
A spool created by Quick Add, a CSV import or an RFID scan has no slicer
preset, brand or subtype. Reopening it in Edit Spool demanded all three
before anything could be saved, so changing its storage location, cost
or notes was impossible - and Copy Spool had the same gate with no Quick
Add toggle to waive it. The preset you were then forced to pick auto-
filled material, brand and subtype from the preset name, silently
rewriting a hand-entered manufacturer (Elegoo -> Generic) so the spool
no longer appeared where it had been filed.
Editing and copying now require only what the backend requires: the
material. Preset, brand and subtype stay fully visible and editable -
nothing is hidden the way Quick Add hides it - and the required-field
markers no longer advertise a rule that isn't enforced. Selecting a
preset fills only fields that are still empty or that a previously
selected preset had filled, so values the user (or the saved spool)
provided survive; switching between presets still replaces what the
earlier one contributed.
The brand and material dropdowns also no longer filter themselves down
to the brand/material pairs known to the color catalog and slicer
presets. Elegoo is catalogued only for PLA, which made a real product
like Elegoo ASA look impossible to enter. Both lists now always offer
everything known, with paired entries ranked first under Suggested and
the rest under All, and a spool's own custom brand or material is always
present in its own dropdown. The SpoolBuddy write-tag form shares these
fields and gets the same treatment.
Lastly the Quick Add layout no longer leaks out of create mode: quick-
adding a spool and then opening Edit left the edit form in the reduced
layout with no toggle to leave it, because the toggle is create-only.
Frontend only. Translated in all locales; wiki updated. Covered by
validation and form-interaction tests.
Projects made of many distinct files that each need N prints (e.g. 13
plates x 10 sets = 130 prints) only had aggregate progress. Finding out
"how many times have I printed plate_7?" meant reading the Activity
Timeline line by line, unusable at 130 events.
Projects now take an optional Copies per File target. Every printable
file in the project's linked folders shows an X / N badge with a mini
progress bar (gray not started, amber in progress, green done), and the
progress card gains a Complete Sets bar - the minimum per-file count,
i.e. how many finished assemblies can be shipped right now. Without the
target, printable files show a plain printed-count badge.
Counting matches the aggregate project stats: completed runs only,
served by a new /projects/{id}/file-progress endpoint. Runs attribute
to a file via a new library_file_id stamp on queue-dispatched archives,
falling back to content hash and then filename for historical rows.
Also fixed: files queued from a project-linked File Manager folder now
inherit that project, so their prints count toward project statistics -
previously only prints started from the project page were attributed.
Test-harness fix along the way: the test suite's get_db override never
committed, unlike production get_db, so endpoints relying on the
request-scoped commit silently lost their writes in tests. The override
now mirrors production commit/rollback semantics.
Library folders have no ownership tracking, so folder deletion was
gated entirely behind library:delete_all - a user with
library:delete_own could create folders and delete their own files,
but the emptied folder sat there until an admin removed it.
Users with library:delete_own can now delete folders that are truly
empty: no subfolders and no files, including trashed ones - folder
deletion cascades, so removing a folder that holds another user's
trashed file would silently break trash restore. External folders
(operator-configured mounts) and folders linked to a project or
archive still require library:delete_all even when empty, since
deleting them affects more than the folder itself. The bulk-delete
endpoint applies the same rule instead of skipping all folders for
non-admin users.
The folder tree's Delete entry enables accordingly and shows a
"You can only delete empty folders" hint on non-empty folders. The
backend stays authoritative - a folder that only contains trashed
files is invisible in the tree but still refuses deletion.
The live Obico classification was only visible under Settings ->
Failure Detection, so tracking how detection matched an ongoing print
meant flipping between the Printers screen and Settings.
Each printer card's badge row now shows an AI badge whenever detection
is enabled for that printer, like the other health badges: gray Idle
while no print is being watched, then green Safe, amber Warning, or
red Failure while a print is actively monitored. The tooltip carries
the current smoothed score; clicking jumps to the full detection
status and history in Settings. Printers excluded from the monitored
subset show no badge.
Served by a new lightweight /obico/printer-status endpoint readable
with printer permissions alone - it exposes only the enabled flag, the
monitored-printer set, and per-printer classification, keeping ML URL
and other configuration behind the existing settings-gated endpoint.
Bark is the open-source, account-free iOS push app (self-hostable
via bark-server). Configure with just the device key from the app;
the server URL defaults to the official api.day.app relay and
accepts a self-hosted instance. Optional settings: notification
Group, Sound, and iOS Interruption Level - Time Sensitive breaks
through scheduled summaries, Critical bypasses Silent mode and
Focus, Passive delivers silently.
bark-server can wrap failures in an HTTP 200 body ({"code": 400}),
so the sender checks the body code as well as the HTTP status.
Unknown interruption levels are dropped rather than forwarded.
When an HA notification provider targets a notify service (e.g.
notify.mobile_app_myphone), a new optional Data (JSON) field is
forwarded as the service call's nested "data" object - the same
place HA automations put mobile push options like priority, ttl,
channel, and group. ttl: 0 + priority: high make Android pushes
arrive immediately; channel gives printer alerts their own sound.
JSON rather than key=value lines so numbers stay numbers and nested
options work. Validated on both ends: the UI rejects malformed JSON
before saving, and the sender fails loudly instead of posting a
half-built payload. Only included when configured - the default
persistent_notification.create path is unchanged, as its schema
rejects unknown keys.
The Most Expensive record on the Statistics page ranked prints by
filament cost alone, ignoring the per-print energy cost Bambuddy
already measures via an attached smart plug. It now ranks by
filament + measured energy cost; prints without smart-plug data
compete on filament cost alone, as before.
Filament Trends gains an Energy Over Time chart: kWh per day (per
hour for ranges of a week or less, per week for long ranges), with
the range's total kWh and energy cost in the header. The chart only
renders when the selected range contains measured energy data, so
setups without smart plugs see no change.
The /archives/slim stats feed now carries each run's energy_kwh /
energy_cost from print_log_entries. Translated in all locales.
Covered by backend and frontend tests.
The Edit Spool "PA-Profil" tab and the SpoolBuddy write-tag page fetched a
printer's calibrations with getKProfiles(printer.id), which defaults the nozzle
filter to 0.4. The printer/MQTT layer filters strictly by that diameter, so on
a multi-nozzle printer a same-filament 0.6mm K-profile was never retrieved and
the picker showed only the 0.4mm entry ("1 match"). (The AMS-Slot config dialog
was already fixed in #1899; these two pickers were not.)
Add installedNozzleDiameters(status) and a shared fetchPrinterCalibrations()
that queries every reported nozzle diameter and merges the results, falling
back to 0.4 when the printer hasn't reported nozzle hardware. Each profile row
now shows a nozzle-diameter badge so identically-named profiles are distinct.
Gitea/Forgejo served under a ROOT_URL path prefix (e.g. https://host/gitea)
place repos at /<prefix>/owner/repo. The Gitea backend assumed a host-root
layout: parse_repo_url required exactly two path segments (so subpath URLs
raised "Cannot parse repository URL") and get_api_base dropped the prefix,
yielding https://host/api/v1 instead of https://host/gitea/api/v1.
Treat the final two path segments as owner/repo and keep leading segments as
a base-path prefix; derive the API base as {scheme}://{host}{prefix}/api/v1.
Root-hosted instances are unaffected. Forgejo inherits the fix; GitHub/GitLab
are untouched.
- postcss 8.5.15 -> 8.5.23 (GHSA-r28c-9q8g-f849, source-map path traversal)
- brace-expansion override ^5.0.7 -> ^5.0.8 (GHSA-mh99-v99m-4gvg, DoS)
react-router: pin react-router-dom to exact 7.18.1 (direct dep) and react-router
to 7.18.1 via overrides (transitive). 7.18.1 is the most-patched 7.x -- it clears
14 advisories that older 7.x releases carry, several reachable from a SPA (open-
redirect XSS in Link/useNavigate, route-matching DoS). The one remaining advisory,
GHSA-qwww-vcr4-c8h2, is RSC-mode-only; Bambuddy is a Vite SPA using BrowserRouter
with no RSC runtime (@react-router/server not installed), so the path is
unreachable. The only version that fully clears npm audit is the 8.3.0 major
(no react-router-dom 8.x exists; it needs migrating 50 import sites plus a React
peer bump), deferred as its own change.
Because a version pin can't stop npm from reporting the theoretical 7.11.0
downgrade as fixAvailable, the ci.yml (hard) and security.yml (nightly issue)
audit gates gain a narrow, documented allowlist keyed on the GHSA id. It resolves
the react-router-dom -> react-router advisory chain and stays fail-closed: a
different advisory on react-router still fails the gate, and an isSemVerMajor
guard drops the exemption the moment a non-major fix ships, forcing us to take it.
The Print Queue History tab reported the full count in its header (e.g.
"History (311 items)") but the row builder hard-sliced the list to
items.slice(0, 50) with no control to load the rest, so everything past the
50th finished print was unreachable. The whole history is already loaded
client-side (the queue endpoint has no limit) and sorted -- it just wasn't
drawn.
History now renders progressively: the first page (50) plus a "Show more"
button and a "Showing X of Y" count that loads the next page until the full
list is on screen. The visible count resets to one page only on a deliberate
re-sort or location-filter change -- not on the periodic queue poll, which
produces a fresh array each tick and would otherwise collapse an expanded
view mid-scroll.
Frontend-only; batch grouping and per-row actions unchanged. Two new i18n
keys across all 12 locales. Covered by a test asserting the 50-row cap, the
count label, and that Show more reveals the remainder. Wiki updated.
With LDAP auth in use, the debug log carried the full user DN on successful
auth -- e.g. "(DN: CN=Joe Schmoe,CN=Users,DC=ad,DC=example,DC=com, ...)". A DN's
leaf CN is the user's real name, PII on par with the email address already
redacted, and it passed straight into an uploaded support bundle. The log
sanitizer (shared by the support bundle and the in-app bug report) had no DN
pattern; DNs also leak via ldap3 exception strings and group-mapping logs.
- sanitize_log_content: redact LDAP DNs to [DN] -- a run of >=2 attr=value RDN
components (CN/OU/DC/UID/...). The value class excludes <>;+ (RFC 4514 requires
them escaped in a value) so the final comma-unbounded component doesn't swallow
trailing log text such as "-> GroupName". Ordinary key=value lines are untouched.
- ldap_service: stop logging the raw DN on successful auth (username + group
count suffices), keeping the PII off disk even before bundle sanitization.
Closing an external USB (V4L2) camera view abruptly could leave its ffmpeg
running and holding /dev/videoN open -- LED stuck on, and reopening the view
failed or took 10-30s fighting for exclusive device access. Same class of leak
as #776 (built-in RTSP path), but the external path was never wired into that
fix: external streams registered into none of the _active_streams /
_disconnect_events / spawned-PID registries, so /camera/stop returned
{"stopped": 0} for a live USB stream and the orphan janitor's /proc net matched
only rtsp(s)://bblp: cmdlines. Cleanup ran only via the stream generator's own
finally, which an abrupt disconnect can skip.
- Thread an on_process callback + stop_event through generate_mjpeg_stream into
_stream_usb / _stream_rtsp; register the process before the startup probe so a
process that hangs on a locked device (not just one that exits) is reapable.
- Register external streams into the shared registries under a unique
{printer_id}-ext-{token} id so /camera/stop and cleanup_orphaned_streams find
and kill them; stop_event prevents the reconnect loops from respawning.
- Extend the /proc safety-net scan to also match USB (-f v4l2) ffmpeg, excluding
still-active streams and unrelated ffmpeg.
The slice client only checked the sidecar's HTTP status, not its body. When the
sidecar -- or a reverse proxy in front of it -- returned 200 OK with a body that
wasn't a real 3MF (a stock/misconfigured sidecar, a proxy error page, a truncated
response, or an OrcaSlicer/Bambu Studio CLI crash emitting no output), Bambuddy
wrote that tiny blob to a .gcode.3mf, stored it as a valid sliced file (the
3MF-parse failure was swallowed as "no thumbnail"), and let it be queued and FTP'd
to the printer -- producing the ~28-byte files that "did nothing" and then failed
at print time. Separately, a genuine 413 comes from the proxy in front of the
sidecar rejecting the multi-MB upload (model + profiles), so raising the body
limit on the wrong proxy layer had no effect.
- Factor the duplicated status handling in slice_with_profiles /
slice_without_profiles into one _handle_slice_response.
- When a 3MF export was requested, validate the body is a real ZIP; otherwise
raise SlicerApiServerError with an actionable message instead of persisting
a corrupt file.
- Special-case 413 with a message naming client_max_body_size on the proxy
directly in front of the sidecar (Cloudflare cap noted).
The folder tree's "sort by recent activity" and the file pane's date sort
put external (mapped/NAS) files in a near-random order instead of ls -t's
newest-first. Nothing captured the files' on-disk mtime: the sort keyed off
the DB updated_at/created_at, which for a bulk external scan is the same
scan instant for every row, so a whole block tied and sorted arbitrarily;
only rows Bambuddy had later touched individually looked "partially right."
The tree also bubbled up only immediate child-file activity, so a file added
deep in a subtree never lifted its parent folders.
- Add nullable fs_modified_at to LibraryFile and LibraryFolder (dialect-
branched migration, mirroring the #2615 dispatching_at pattern).
- External scan records each file's and directory's real os.stat().st_mtime
and refreshes it on every re-scan, so a file edited over the mount
re-sorts and existing installs backfill on the next scan.
- list_folders computes each folder's activity as a recursive newest-
descendant roll-up (post-order), so a fresh deep file lifts every ancestor.
- Folder tree sort and the file pane's date sort now use the real mtime,
falling back to created_at for managed uploads with none.
- New toolbar toggle shows/hides each item's last-modified date in the right
pane (grid + list), with strings in all locales.
Store the mtime as naive UTC to match the other timestamp columns so activity
comparisons never mix naive and aware values on either dialect. Covered by
integration tests (mtime capture, re-scan refresh, deep-file recursive bubble,
folder mtime) and a frontend test proving fs_modified_at is preferred over
created_at.
After #2594 every empty-slot clearing path skipped AMS-HT units, so a removed
HT spool never cleared on the printer card while Bambu Studio correctly showed
Empty. Root cause: the HT presence bit is packed as a single consecutive bit in
tray_exist_bits at 16 + (ams_id - 128) (HT-A=16, HT-B=17, ...), not the regular
ams_id*4 position -- so the bitmask cleanup, which skipped id>=128, never
touched it. The HT's state field is firmware-variant (loaded reports 11 on H2D,
9 on the #2594 firmware) and it keeps echoing stale tray_type after removal, so
the bitmask is the only reliable, firmware-independent signal. Confirmed against
a live H2D capture (loaded=0x10f7f, empty=0xf7f) and the OrcaSlicer
DevFilaSystem.cpp reference (is_exists = tray_exist_bits >> (16 + (ams_id-128))).
- apply_tray_exist_bits: handle AMS-HT (128-135) at 16+(ams_id-128) instead of
skipping it; clears an empty HT and, because a loaded HT keeps its bit set,
never wrongly clears one (keeps the #2594 fix intact). Ids outside the known
regular (0-15) and HT (128-135) ranges are left untouched rather than guessed.
- Build the AMS change-hash from the merged state, not the raw payload, so a
removal signalled only by the bitmask (firmware still echoing tray_type) still
flips the hash and fires on_ams_change to unbind the spool_assignment row.
- Emit the exists presence bit in the websocket status serializer (REST already
did) so the card renders "Empty" instead of "?" where state is ambiguous.
In the Print dialog's Filament Mapping, each required filament shows its
name and the grams the job needs, e.g. "Bambu PLA Basic (281.2g)". Name and
grams shared one fixed-width column with truncate on the whole string, so a
long name pushed the "(...g)" off the end and clipped it -- partially on a
wide screen, entirely in mobile portrait. The gram usage is the number that
matters (does the spool have enough left?), so it shouldn't be the part that
gets dropped.
Pin the gram usage (shrink-0, whitespace-nowrap) and let only the name
truncate, with the full name on hover. Applied to both the Specific-Printer
(FilamentMapping) and Any-model (PrinterSelector) panels. Layout only.
Fetching K-profiles probes every nozzle size in turn (extrusion_cali_get
for 0.2/0.4/0.6/0.8mm), and each response echoes the requested diameter at
the top level. _process_message passed every "print" message -- including
these responses -- to _update_state, which treats a top-level
nozzle_diameter as the installed hardware. So the last size probed (0.8)
overwrote the real nozzle in memory; a genuine status push corrected it and
the next K-profile fetch broke it again, which is why it flickered between
0.8, empty and the correct 0.4. Since 1.2.5 the #1899 mismatch guard then
refused to dispatch, failing prints with a bogus "printer has 0.8mm".
Handle extrusion_cali_get responses only via the K-profile parser and skip
_update_state for them, mirroring the existing get_accessories guard. The
nozzle size now comes solely from the real status push. In-memory only --
affected printers self-correct on the next push after updating.
The print queue couldn't be reordered on a phone. In portrait the drag
grip and selection checkbox are hidden below the sm breakpoint, so there
was no reorder affordance at all; in landscape the grip shows but it
carried touch-action: manipulation while the only dnd-kit sensor is a
PointerSensor with an 8px distance, so touch gestures scrolled instead of
starting a drag. Reordering was effectively mouse-only.
Add tap-friendly up/down arrow buttons to pending rows on mobile (shown
below sm, where the drag handle is hidden). They move a row one step among
its siblings -- standalone items, whole batches, and items within a batch,
in both the flat and per-printer layouts -- and persist through the same
POST /queue/reorder path as drag. Arrows appear only in the manual
"position" sort (shortest-job-first off) where position has meaning, are
gated on queue:reorder, and the first row's up / last row's down render
disabled. Also switch the desktop drag handle's touch-action to none so
mouse-style drag works on touch (landscape phones, tablets). Reuses the
existing queue.moveUp / queue.moveDown translations.
The File Manager 3D Preview dialog (ModelViewerModal) rendered plate
thumbnails with the raw thumbnail_url. The plate-thumbnail endpoints are
gated behind a camera stream token passed as ?token= (an <img> can't send
an Authorization header), so with auth enabled the browser fetched without
a token and got 401 "Valid camera stream token required" — broken image
icons for every plate. The Slice dialog's picker (PlatePickerModal) and the
Print modal's PlateSelector already append the token via withStreamToken(),
which is why the same file's thumbnails showed there.
Wrap the thumbnail src in withStreamToken(), matching the other two call
sites. The token is synced app-wide and withStreamToken() is a no-op when
auth is off, so non-auth setups are unchanged.
Follow-up to 0f203ce: force color match now picks the right AMS slot, not
just the right printer. The slot mapper cleared tray_info_idx when applying
an override, so on a printer holding two same-colour PLA spools of different
variants (Basic GFA00 / Matte GFA01 / Silk GFA06) it could map to the wrong
one. It now keeps the variant for force_color_match overrides (both the 3MF
and no-3MF fallback paths) so the matcher pins the matching tray, and falls
back to type+colour when that variant isn't loaded. A manual filament swap
(a preference override) still clears the idx so it matches the swapped-in
spool rather than the old one.
The printer-card queue-compatibility hint applies the same variant rule.
Force color match dispatched onto the wrong PLA sub-variant: a job sliced
for White PLA Matte was treated as an exact match by printers loaded with
White PLA Basic or Silk+, because Bambu reports every variant as
tray_type "PLA" and the distinction lives only in tray_info_idx
(GFA00=Basic, GFA01=Matte, GFA06=Silk).
Two places dropped the field: the VP queue built each force override
without the parsed tray_info_idx, and _get_missing_force_color_slots
compared loaded trays on (type, colour) only.
Carry tray_info_idx into the override and require it to match when both
the override and a candidate tray have one; a blank idx on either side
(custom/third-party spools, older 3MFs) falls back to the historical
type+colour behaviour, so those setups are unaffected.
The bed_levelling/flow_cali/nozzle_offset_cali boolean->tristate migration
builds two UPDATE statements with an f-string interpolating the column
name. Bandit flags these as B608 (SQL injection) at medium severity, which
failed the release-gate scan in test_security.sh.
The interpolated _col only ever iterates the hardcoded _tristate_cols tuple,
never user input, and SQL identifiers can't be passed as bound parameters.
Suppress with `# nosec B608` (matching the existing settings.py convention)
plus an inline rationale. No behavior change.
test_launcher_shutdown_config.py and test_systemd_backup_paths.py read
repo-root launcher/config files (Dockerfile, docker-compose.yml,
deploy/bambuddy.service, install/install.sh, installers/windows/...,
spoolbuddy/install/install.sh). The Docker test image built from
Dockerfile.test copies only backend/, pyproject.toml, gcode_viewer/ and
requirements, so all 15 tests failed in test_docker.sh with "launcher
moved or was removed" — the files simply aren't in the image.
Guard both modules with skipif on frontend/package.json, which is present
in every source checkout but never in the test image. Native runs
(test_backend.sh, every commit) still execute the tests in full and catch
a genuinely moved/deleted launcher; the release-gate Docker run skips them
instead of failing on files it deliberately doesn't ship.
Moves react-router-dom/react-router 7.16.0 -> 7.18.1, off the range
flagged by GHSA-wrjc-x8rr-h8h6 (open redirect via backslash in Link/
useNavigate), GHSA-h8fp-f39c-q6mh (RSC), and GHSA-337j-9hxr-rhxg (SSR
hydration). The latter two need RSC/SSR, neither of which this
client-only SPA uses; the open-redirect one is the only reachable path
(post-login redirect), already guarded by sanitizeRedirectTarget.
Stays within the existing ^7.16.0 caret, no new transitive deps. Rebuilt
the static bundle. npm audit now reports 0 vulnerabilities.
maziggy