`_match_kprofile` ends in a single-candidate fallback, and the per-nozzle
loop called it once per entry with no record of which live profiles were
already taken. Two backup entries sharing a `filament_id` and matching on
neither `setting_id` nor `name` both resolved to the same live profile, both
got the same `cali_idx`, and both went into the batch — so the second
overwrote the first on the printer while the tally counted two restored.
Reachable in the ordinary way: the user deletes one of a pair after the
backup, and the delete-then-add re-key this code already reasons about is
exactly what strips the `setting_id` match.
Fix: thread a `claimed` set of slot ids through the loop; a live profile can
only stand in for one entry. A displaced entry falls through to
`cali_idx: -1` — add-as-new is the safe outcome — and folds into the
existing `kprofilesUnmatched` note rather than earning a new code.
The single-candidate fallback is still judged against every candidate rather
than the unclaimed ones. Two live profiles for one filament are ambiguous
whether or not another entry has taken one, and narrowing to "available"
would turn a guess the code deliberately refuses into a match.
Tests: 2 regression (the displaced entry is added rather than aliased, and
keeps its own setting_id) + 2 controls (two genuine matches keep their own
slots; a claimed slot does not make an ambiguous pair matchable). Both
regressions confirmed failing against the pre-fix service.
The pager computed `seen = (page - 1) * 1000 + len(entries)`, taking the
requested `per_page` as fact. Gitea clamps `per_page` to
`MAX_RESPONSE_ITEMS`, which defaults to 50. So on a default install page 1
returns 50 entries and sets `seen` to 50, then page 2 sets it to 1050 —
which clears any `total_count` under 1050. The loop returns `success: true`
holding the first 100 entries of a much larger tree.
The restore then reads every missing path as "category not present in this
commit" and skips it silently, which is precisely the failure this override
was written to prevent. Same class as the GitLab pager fix, in the one
direction that got left behind.
Fix: accumulate `seen += len(entries)`. A genuinely over-cap tree still
hard-fails rather than truncating; the cap is a page count, not a file
count, because the page size is the server's choice.
Test: a 120-entry tree served 50 at a time reaches its last entry, in three
requests. Confirmed failing against the pre-fix backend — it stopped after
two pages and reported 100 entries as the whole tree.
`created_by_id` and `deleted_at` both went into the archive `fields` dict
unconditionally, via `entry.get(...)`. A backup commit taken before the
collector wrote those keys carries neither, so `.get` yielded None for both
and the overwrite branch — a blanket `setattr` over every key — wrote NULL
over a live owner.
That is exactly the failure carrying `created_by_id` was added to fix, only
now inflicted on rows that were fine: `_ensure_archive_visible` fails closed
on a NULL owner, so the archive 404s for the person who owns it. It emitted
no note either, because `archivesOwnerCleared` only fires for an id that
isn't in `valid_users`, not for an absent key — and the row still counted as
restored. `deleted_at` had the mirror problem: an old commit silently
un-deleted, since `archivesUndeleted` reads the same absent value.
Absent is not the same as explicitly null. Both keys now only enter `fields`
when the entry actually carries them, so an old commit leaves the column
alone on overwrite and a current one can still say "this archive has no
owner" or "this archive is live". Same shape as the tag-column rule: don't
clear what the backup doesn't know about.
Behaviour change to an existing test, called out deliberately:
`test_overwrite_undeletes_a_locally_deleted_archive_and_says_so` now has to
put `deleted_at: None` in the entry to mean it.
Tests: 2 regression (owner and deleted_at both left alone by a key-less
entry) + 2 controls (an explicit null is still honoured, with its note).
Both regressions confirmed failing against the pre-fix service.
The three remaining review items, all in the read path.
E1 — four provider calls where two would do. preview() called list_commits
twice: once inside _resolve_ref to turn HEAD into a SHA, once more at limit=20
purely to find the entry describing that same SHA. And list_tree's recursive
tree GET was thrown away, so fetch_files immediately fetched the identical tree
again to map path -> blob SHA. _resolve_ref now returns the entry it already
has, and list_tree returns its blob_shas map for fetch_files to take as an
optional argument. GitLab reads files by path and ignores it.
E2 — `commit: null` for a ref outside the 20 most recent. Two causes, and the
second is the one that actually bit: REF_PATTERN accepts a 7-character ref while
providers return the full 40, so the exact `==` in the scan never matched an
abbreviated SHA *even when the commit was in the window*. Fixed by prefix
comparison, plus a get_commit(ref) on the GitHub and GitLab backends for the
genuinely-outside-the-window case. Gitea and Forgejo inherit GitHub's. Still
best-effort: it is a subject line and a date, so a failed lookup renders the
preview without them rather than failing it.
E7 — the two tree readers disagreed, and each was wrong in the other's
direction. GitHub's recursive trees endpoint is not paginated and signals
overflow with truncated=true, which _blob_shas_at hard-fails on. Gitea and
Forgejo *do* page that endpoint, and inherited that single GET unchanged — so a
large backup repo returned only the first page and every category beyond it
looked absent from the commit. GiteaBackend now has its own paging
_blob_shas_at. GitLab had the mirror-image bug the review did not name: at its
50-page cap it exited through the while condition and returned success: True
with a silently partial path list. Both now fail loudly, which is what the
GitHub version was always doing.
Both halves of E7 are the same failure the module already refuses to allow: a
restore that skips categories and calls it "not present in this backup commit".
24 new or changed tests, all failing against this commit's parent.
Four of the review's smaller items.
E6, the substantive one. tag_uid and tray_uuid are both in the overwrite setattr
loop, so a spool matched on one key got the backup's *other* key written onto it.
Neither column has a unique constraint (models/spool.py, and no unique index in
the migrations), so nothing errors — a duplicate tag simply appears, after which
_find_spool's .scalars().first() is non-deterministic and an AMS tag lookup
resolves to an arbitrary one of the two spools. The same loop could also clear a
tag the user had scanned since the backup was taken, when the backup entry held
None.
_find_spool now reports which key matched, and _guard_tag_overwrite drops a tag
column from the write when the incoming value is empty and the local row has one
(the backup predates the scan, so the local tag is the newer fact) or when
another local spool already holds it. Announced in the tally the way the archive
un-delete case already announces itself, rather than done silently — the
spoolTagKept locale key landed with the rest of the i18n block last commit.
E5. The Restore button is hidden without github:restore. All three endpoints are
gated on it server-side, so the modal 403s on its first preview; offering the
button is offering an action that cannot work. Button only — the card stays
visible, since configuring backups is a separate permission — and hasPermission
returns true with auth off, so a single-user instance is unaffected.
E3. models/github_backup.py: the trigger comment said manual/scheduled; this PR
added a third value.
E4. ha_token_from_env: recommending no change, with the reasoning recorded as a
test rather than left in a review thread. It is built only in the settings GET
response, is absent from AppSettingsUpdate, and is therefore never a Settings
row — it cannot reach a backup, so an allowlist entry would be dead code. Worse,
a name-shaped exception to a belt-and-braces denylist is a live hole: an
attacker-authored settings/app_settings.json could get a *token*-named row
written by choosing that name.
4 unit tests and 1 frontend test that fail against this commit's parent, plus 4
controls: a free tag is still written, an unchanged tag is not reported as kept,
an insert is unaffected, and the button still shows with auth disabled.
A German user got a translated modal with "Not present in this backup commit" in
the middle of it. Every tally note and preview caveat was a server-built English
sentence rendered verbatim.
Follows the backup.pathCheck contract already in use one card down in the same
component, deliberately rather than inventing a second convention: the server
sends a `code` plus typed `params` and carries the English along as the
fallback, and the client renders
`t(`...${code}`, { ...params, defaultValue: message })`. The defaultValue arm is
what keeps a newer backend's unfamiliar code readable instead of printing the
raw key — covered by its own test.
Shapes:
- notes: list[str] -> list[GitHubRestoreNote] {code, params, message}. Breaking,
but the field is unreleased in this same PR.
- GitHubRestorePreviewCategory gains detail_code / detail_params; `detail` stays
as the English fallback.
- _CategoryTally.note(code, message, **params), deduped on (code, params) rather
than on the rendered text, so two offline printers both keep their names. The
20-note cap is unchanged.
28 new leaves across 13 locales: 20 notes.* and 8 details.*. `noData` collapses
the four per-category "No X data in this backup" strings into one, since the
category heading already renders beside it. Counts use single-form {{count}} in
the existing "N record(s)" style rather than i18next plural suffixes — nothing in
this block uses _one/_other and the parity script has extra rules for them.
Parity holds at 5737 leaves in all 13 locales.
Deliberately out of scope, and worth saying so rather than leaving it to look
like an oversight: result.message, the commit-picker subject lines and the HTTP
error strings stay English. Those also originate in the provider backends, so
code-ifying them widens the diff well past the restore service.
spoolTagKept is added here with the rest of the locale churn but is not emitted
until the next commit, so the 13-locale change lands once.
Two buttons labelled "Restore" were visible in the same viewport — this card's
and the Local Backup card's — with different destinations. The modal title
disambiguated them; the buttons did not.
backup.restoreFromGit.button only. The Local Backup card's t('backup.restore') is
unchanged, and each locale's new value follows the wording that locale already
uses in the modal title rather than being a literal translation of the English.
One correction to the review's aside: this does not simplify
GitHubRestoreModal.test.tsx. The /Restore$/ + confirmButtons[length - 1] idiom
there is not caused by the card button — the modal is rendered standalone in
those tests — but by the modal's own footer action and its confirm dialog both
reading t('backup.restore'). Left alone as out of scope.
Neither _collect_archives nor _restore_archives touched created_by_id, so every
restored archive row landed NULL. That column is not attribution, it is what the
access check runs on: _ensure_archive_visible (api/routes/archives.py) fails
closed on NULL — a 404 for any caller without archives:read_all — and the list
paths filter created_by_id == user.id. On a multi-user instance the tally
therefore reported archives restored while the person who owns them could
neither list nor open them.
Same shape as the deleted_at fix, and the same remedy: the collector records the
key next to deleted_at, the restore mirrors the printer_id/project_id pattern
exactly — one hoisted select(User.id), a membership test per row, an unknown id
coerced to None rather than failing the row, and one de-duplicated note. It is in
the overwrite setattr loop too, so overwrite keeps meaning "make local match the
backup". Additive on the backup side, so older backups still restore; they just
cannot know the owner.
Clearing the id is not silent-safe, so the note says what it costs: those
archives are visible only to users with archives:read_all until an admin
reassigns them.
Caveat recorded in a comment and raised in the PR, not decided here: this is the
one place the module reuses a raw backup id, against its own rule. Validating it
means a *stale* id clears rather than pointing somewhere wrong, but a live id
belonging to a different person on a different instance would still collide.
Collecting username and resolving on that would close it.
6 unit tests and 1 integration test that all fail against the parent commit,
plus 2 controls that pass either way — a backup with no created_by_id key still
restores, and a second operator still gets a 404.
A settings restore refuses to write anything credential-shaped, but wrote the
switches that depend on those credentials like any other key. Restoring the two
halves apart is not a partial restore, it is a downgrade.
The sharp case is Prometheus. /api/v1/metrics is on PUBLIC_API_ROUTES and its
only gate is `if token:`, so an empty or absent token means no authentication at
all. prometheus_token matches the `token` hint and is refused; prometheus_enabled
is an ordinary key and was written. On an instance that never enabled Prometheus
there is no local token row, so overwrite-*off* alone was enough to publish the
whole metrics body to anyone who could reach the port. The new integration test
shows exactly that: 200 with a full unauthenticated body before, 404 after.
Four more pairs are the same shape and break an integration rather than open one:
ldap_enabled/ldap_bind_password, mqtt_enabled/mqtt_password, ha_enabled/ha_token
(with an HA_TOKEN env arm, since get_homeassistant_settings prefers the
environment over the row), and virtual_printer_enabled/virtual_printer_access_code
— the last largely vestigial post-migration, included for consistency.
A toggle is refused only when all five hold: the payload value is truthy, the
backup carried a non-empty companion credential, that credential is denylisted,
this instance has no usable value for it, and the toggle is not already on
locally. The second condition is what keeps the rule honest — an anonymous MQTT
broker and an anonymous LDAP bind are legitimate configs that pass empty
credentials straight through, and without it both would be false positives. With
it, the rule fires only when the restore would produce a config weaker than both
the backup and the local instance. A present-but-blank prometheus_token row
counts as unusable, since that is precisely the `if token:` hole.
The rule needs the payload *and* local database state, which the old static
_count_items could not see, so preview and restore now share one classifier:
_plan_settings() runs a single SELECT over both halves of every candidate pair
before anything enters the session, and returns the three refusal buckets.
preview() takes the session the route already has. _is_skipped_setting_key is
gone rather than having its docstring corrected as asked: a name is no longer
enough to decide, so the union predicate had no caller left.
Also implements the review's third ruling — the tally counts what the preview
counted, and refusals live in the notes. Two `skipped += 1` increments are
dropped (blocked, protected) and the companion refusal adds none; the value-is-
None and overwrite-off skips stay, because they depend on the run's flags, which
the preview cannot see. restored + skipped + failed now equals the item count the
user was shown — off by three before.
Behaviour change called out for review: test_credential_keys_are_never_restored
and test_auth_settings_are_never_restored asserted skipped == 2 and 4; both are
now 0, which is the point of the ruling.
16 new unit tests plus 2 integration tests. Nine of them are controls, because
over-refusal is the real risk of this change — the anonymous-broker and
anonymous-bind guards are load-bearing, not decoration.
Two smaller restore-path fixes from the same review.
The modal's footer counted `selected` raw while the checkboxes rendered
`selected && isAvailable`. Switching commits keeps `selected` on purpose (it is
only pruned once the new preview lands), so for as long as the new commit's
preview was in flight — with the category list replaced by its spinner — the
footer still read "2 selected" over an enabled Restore button, and clicking it
restored the newly-picked commit with the previous commit's categories, none of
which the user had seen an item count for. The count and the POST body now come
from one `selectedCategories` memo gated on availability, exactly as the
checkboxes are, so both go empty until the preview lands.
Restoring Spool inventory without Print archives leaves archive_id_map empty,
so every usage -> archive link is nulled even where the archive exists locally.
It can't be resolved here (the archives payload isn't fetched for a category
that wasn't selected) and a later archives-only restore won't repair it either,
since the usage dedupe key doesn't include archive_id and those rows read as
already-present. So it gets a note naming the remedy while the user can still
redo the run with both categories ticked.
Carries the rebuilt bundle (index-C2LOlVCR.js -> index-C16HJNOV.js).
The relay reads its broker config once, when configure() is called — which is
why the settings PUT handler reconfigures it after writing those rows
(api/routes/settings.py:246). The restore wrote the rows and stopped there, so
the relay stayed on the pre-restore broker until the next backend restart while
the UI showed the restored values: the one way a settings restore could look
applied without being applied.
_restore_settings now reports the keys it actually wrote, and run_restore
reconfigures the relay from the committed rows when any of them is an mqtt_ one.
Three details worth keeping:
* it runs after the commit, because configure() drops the connection and
rebuilds it — not something to do on values a later failure could roll back;
* it is keyed on written, not merely present: a key skipped for overwrite=off
or by the credential blocklist must not trigger a reconnect;
* mqtt_password is never restorable, so configure() gets the row already in the
database and an unchanged broker keeps working.
A broker that refuses the new config is noted on the settings tally ("restart
Bambuddy") rather than failing the restore, matching the PUT handler's
best-effort handling of the same call.
_apply ran archives and spools first, which autoflushes their INSERTs and so
opens SQLite's single write transaction, then called _restore_kprofiles —
which awaits get_kprofiles per printer per nozzle at timeout=5.0 with
max_retries=3, i.e. up to ~15 s each against a printer that ignores the
request. The commit only came afterwards, in run_restore. busy_timeout is 15 s
(core/database.py:21), so a restore covering a couple of unresponsive printers
held the writer past it and unrelated writes elsewhere in the app failed with
"database is locked".
Commit the database categories before the MQTT phase starts. The K-profile
work is not in that transaction anyway — it leaves over MQTT — so the only
thing lost is rolling those categories back when a K-profile send fails, and
that rollback was never the right behaviour: extrusion_cali_set has already
reached the printer by then, so undoing the database half would just make the
two disagree.
_collect_settings exports every Settings row minus two credential keys, so
auth_enabled / advanced_auth_enabled / local_login_enabled / setup_completed
all travel in a backup, and none of them are credential-shaped enough for
_SECRET_KEY_HINTS to catch. Writing them back was the one part of a settings
restore that changed who can reach the instance rather than how it behaves:
* auth_enabled=false — from any backup taken before auth was turned on —
disabled authentication. core.auth caches only the enabled=True result, on
a 30 s TTL, precisely so staleness fails closed; set_auth_enabled pairs its
write with invalidate_auth_enabled_cache(). The restore did neither, so it
left the stored value the open one.
* local_login_enabled=false walked straight past the #1589 refusals in
update_settings (no enabled OIDC provider / no OIDC link on the caller),
which exist to stop exactly that lockout.
* /github-backup/restore is gated on GITHUB_RESTORE alone, so honouring these
keys made that permission a way to rewrite auth config without
SETTINGS_UPDATE.
Flipping an existing row needed overwrite_existing, so the odds were lower
than the severity. Both refusals now share _is_skipped_setting_key so the
preview's item count still matches what a restore writes, and the skipped
keys get their own note pointing at the auth UI rather than being folded in
with the credential ones.
The Ukrainian locale landed on dev in #2695, after this branch was cut,
so uk.ts was missing the 23 restoreFromGit keys the rest of this branch
adds to the other twelve. check-i18n-parity.mjs auto-discovers the
locales directory, so it would have failed on the merge.
All 13 locales are now at parity (5699 leaves each). Terminology follows
what uk.ts already uses for the local-backup restore path — "Відновити"
for restore, "резервну копію" for backup.
Restoring K-profiles addressed extrusion_cali_set at the cali_idx recorded in
the backup. If that slot no longer existed on the printer the write was
silently dropped and the restore still reported the profile restored.
Not an edge case: Bambuddy's own K-profile editor is what re-keys the slot.
On a single-nozzle printer an edit is delete-then-add, so any edit between
backup and restore reproduces it.
Found testing on an X1E. Backup held cali_idx 8151; an edit through the UI
re-keyed the profile to 4606; the restore published cali_idx 8151, the printer
ignored it, and the tally read "1 restored" while the k-value stayed put.
Resending the identical payload with cali_idx 4606 applied, isolating the
stale index as the cause.
Fix mirrors the natural-key matching spools and archives already use, which
the module docstring already promised but scoped to spool.id and
print_archives.id. Before writing, read the live profiles for the nozzle and
match on filament_id + setting_id, falling back to filament_id + name, then to
the sole candidate for that filament. Send that profile's current cali_idx;
where nothing matches send -1 so the printer adds a new profile instead of
addressing a dead slot, and say so in the tally. A failed read degrades to
adding rather than aborting.
Also corrects the tally note. The printer does acknowledge extrusion_cali_set
-- it answers with a result/reason pair -- so "published without
acknowledgement" was false. It reports "fail" on writes that land, though, so
the note now says the acknowledgement is unreliable rather than absent.
Consuming result is left to a follow-up.
Re-verified on the same X1E: perturbed to k=0.061, restored from the commit
carrying the stale slot, payload went out with cali_idx 4606 and the printer
read back 0.027.
Restoring App Settings from the Backup tab silently reverted almost everything
it reported restoring.
GitHubRestoreModal invalidated ['settings'] on success. SettingsPage — which
renders the modal — keeps a `localSettings` copy of its form state alongside a
debounced effect that PATCHes it back whenever the server copy differs. The
refetch made the two differ, the effect cannot tell "server changed" from "user
edited", and 500 ms later it wrote the pre-restore values back over the restore.
75 of the ~80 keys in a backup sit in that save payload, so a restore reporting
"77 restored, 0 failed" left only the five auth/internal flags behind. The
backend was correct throughout: the same restore driven against the API with no
browser open applies cleanly.
Since the Restore button lives on the Settings page, this was the default path
rather than an edge case.
Fixed inside the modal rather than in SettingsPage: that debounce's own comments
show it was tuned to avoid resetting text fields mid-typing, and widening this
change into it risks that. So ['settings'] is no longer invalidated, and every
exit path (footer Close, header X, overlay click, Escape) now reloads instead of
closing when settings were among the restored categories, since leaving the page
mounted is what arms the overwrite. The ['spools'] and ['archives']
invalidations are unchanged — SettingsPage is the only page carrying this kind
of whole-payload auto-save.
The root cause is left for a follow-up: any future feature that writes settings
server-side will be reverted the same way.
Found by manual end-to-end testing against a private test repo, which also
confirmed the natural-key id remapping and the overwrite-off behaviour working
as designed.
Tests: 3 new frontend tests — the settings query is never invalidated, a
settings restore reloads rather than closing, and a non-settings restore still
closes normally. The first two fail against the pre-fix component. Full frontend
suite green (186 files / 2459 tests), i18n parity unchanged, eslint clean.
The Git backup feature was push-only: there was no equivalent of the local
backup's Restore button, so recovering meant hand-downloading JSON files from
the repository. This adds the read side.
Providers gain list_commits / list_tree / fetch_files on the GitProviderBackend
ABC. GitHub implements them against the Git Data API and Gitea/Forgejo inherit
that unchanged; GitLab overrides for its own REST shape, including tree
pagination and subgroup path encoding. fetch_files is batched so the path ->
blob SHA lookup happens once per restore rather than once per file, and uses the
blobs API rather than contents because contents silently inlines only the first
1 MB.
The new GitHubRestoreService resolves HEAD to a concrete SHA up front, so a
preview and the restore that follows act on the same commit even if a scheduled
backup lands in between. Categories are applied archives -> spools -> settings
-> kprofiles: archives first because spool usage history references archive_id,
K-profiles last because they leave the database and publish over MQTT.
Restores never reuse the backup's primary keys. spool.id and print_archives.id
are bare autoincrement columns, so ids from an old backup very likely belong to
unrelated rows today; rows are matched on natural keys (tag_uid, then
tray_uuid, then a descriptive composite for spools; content_hash or filename
plus started_at for archives), inserted without an explicit id, and an
old_id -> new_id map rewrites the foreign keys in spool usage history.
created_at is carried across on insert so restoring the same backup twice
matches instead of duplicating. Dangling printer/project links are cleared and
reported rather than failing the row.
Settings restore re-applies the collector's credential denylist on the read
side, plus a pattern guard, because a backup taken before that denylist existed
can still contain secrets. Restored archives are metadata-only: the 3MF and
thumbnail bytes are not in a Git backup and print_archives.file_path is NOT
NULL, so inserted rows get an empty path and the UI says so.
Backup and restore take a mutex against each other; both write the same tables
and talk to the same printers. Restores are logged as GitHubBackupLog rows with
trigger="restore", which needs no migration and surfaces them in the existing
History card.
Cloud profiles are deliberately not a restore category. The collector never
actually writes cloud_profiles/*.json - it reads a "setting" list key the Bambu
Cloud API does not return - and the preset list it would write carries no
setting payload. Filed separately.
Permission github:restore already existed and is granted to Administrators, so
no permission changes were needed.
Tests: 125 new backend tests (provider reads across all four providers, the
per-category appliers, the API endpoints) and 13 frontend tests. Full suites
pass with no regressions; the 35 backend failures on Windows are byte-identical
with and without this branch.
Switching a card from M to XL made it wider, enlarged the printer name
and the thumbnail, and left everything else where it was. The AMS slot
labels, temperatures, filament names, status text and every small button
stayed pinned between 8 and 11 pixels -- under the smallest size used
anywhere else in the app -- so a full-width card carried the same tiny
text as the compact one. Browser zoom does not answer this: it enlarges
the whole page and so preserves the very disparity being reported.
The card root now carries ten custom properties derived from cardSize,
and the 200 fixed sizes in its subtree reference them: text-[10px]
becomes text-[length:var(--pc-t10,10px)], w-3 h-3 becomes
w-[var(--pc-i3,0.75rem)]. L draws the body 20% larger and XL 40%,
icons included, so the controls grow with the text instead of staying
fiddly to hit.
Custom properties rather than an em-based root font-size. Setting
font-size on the card would silently reshape any text that declares no
size of its own, and would break for portalled content. Each converted
class names its old fixed value as the fallback, so anything rendering
outside a card root is untouched -- which is what leaves the portalled
temperature popover exactly as it is. Its four sites stay fixed on
purpose, as does the page chrome; the conversion was scoped from the
function declarations rather than line numbers, and afterwards only
those four intended sites still hold a literal px value.
S and M stay at 1.0. S is the dense fleet view where density is the
point and M is the default, so an existing install looks identical until
the user reaches for a size that is already asking for more room -- the
same control the request asked this to follow.
The AMS-HT card needed separate work, because its temperature and
humidity readings sit beside the slot rather than under it. That single
slot was the only growable item on its row, so it took every spare pixel
and pushed the readings hard against the card's edge; it is now capped
at roughly two ordinary slots, which keeps them clear at any card width.
The card itself is capped at one full AMS card's width, so a unit that
wraps onto a line of its own no longer stretches that slot across the
whole card.
The AMS slot minimums are deliberately NOT scaled. Raising them was
tried and reverted: those cards already grow to fill their row, so
3.5rem is a floor they sit well above, and raising it only cost a unit
its place on the row -- which is what pushed the AMS-HT onto a line by
itself and exposed the stretching above. A test pins them at 3.5rem at
XL so this reads as a decision rather than a missed spot.
Switching a card from M to XL made it wider, enlarged the printer name
and the thumbnail, and left everything else where it was. The AMS slot
labels, temperatures, filament names, status text and every small button
stayed pinned between 8 and 11 pixels -- under the smallest size used
anywhere else in the app -- so a full-width card carried the same tiny
text as the compact one. Browser zoom does not answer this: it enlarges
the whole page and so preserves the very disparity being reported.
The card root now carries ten custom properties derived from cardSize,
and the 200 fixed sizes in its subtree reference them: text-[10px]
becomes text-[length:var(--pc-t10,10px)], w-3 h-3 becomes
w-[var(--pc-i3,0.75rem)]. L draws the body 20% larger and XL 40%,
icons included, so the controls grow with the text instead of staying
fiddly to hit.
Custom properties rather than an em-based root font-size. Setting
font-size on the card would silently reshape any text that declares no
size of its own, and would break for portalled content. Each converted
class names its old fixed value as the fallback, so anything rendering
outside a card root is untouched -- which is what leaves the portalled
temperature popover exactly as it is. Its four sites stay fixed on
purpose, as does the page chrome; the conversion was scoped from the
function declarations rather than line numbers, and afterwards only
those four intended sites still hold a literal px value.
S and M stay at 1.0. S is the dense fleet view where density is the
point and M is the default, so an existing install looks identical until
the user reaches for a size that is already asking for more room -- the
same control the request asked this to follow.
Wiki notes the scaling in the card-size table and why it differs from
browser zoom. Tests pin the variable values at every size, including
that S and M still emit the pre-change sizes.
An external spool holder that never gets used still takes a full card's
width in the Filaments row, next to the AMS units that are actually in
use. An eye icon at the right-hand end of that row's header now hides
it, and clicking it again brings it back -- the affordance stays in
place rather than moving to a settings page, so the choice is
discoverable and reversible where it applies.
Per printer rather than global. A global flag would suit a toolbar
button, but an icon on the card that silently rearranged every other
card would surprise; it is keyed by printer id in one localStorage
entry, the same shape as printerCollapsedSections, and sits alongside
the other browser-local printer-page view preferences.
The toggle is offered only when the printer has at least one AMS. On a
machine with no AMS the external spool is the entire filament section,
so hiding it would leave an empty row with no control to undo it. The
icon and the hide condition read the same canHideExternalSpool, so a
preference stored before an AMS was unplugged cannot blank the row
either -- the spool reappears instead.
The store lives in a new utils/printerCardPrefs.ts rather than in the
9,157-line page. It re-reads before writing so two cards toggled in one
session cannot clobber each other's entry, deletes the key instead of
storing false, and treats a malformed or unavailable localStorage as
"nothing hidden" so a private-mode browser cannot throw out of a render.
Every pop-up notification auto-dismissed after three seconds regardless
of what it said. That suits "Settings saved" -- a confirmation of
something the user just did, skimmed rather than read -- but errors and
warnings are a different kind of message. They carry a reason, often one
relayed from the printer or the backend, and they run to a couple of
lines. Three seconds was not enough to finish reading one, and there is
no notification history to go back to once it slides away.
Errors and warnings now hold for six seconds; success and info keep the
three-second default. The duration was a bare literal in showToast and
is now derived from the toast type, with the long window expressed as
twice the base so the two cannot drift apart if the base is retuned.
showPersistentToast never had an auto-dismiss timer and is untouched, as
is the background dispatch toast -- its timer measures "the summary has
stopped changing" rather than reading time. Manual dismissal is
unchanged for every type.
The overlay at /overlay/{printer} draws live print data over a
full-screen camera view for OBS, a wall display or any browser source.
It has been tunable since it shipped -- which fields, what size, what
frame rate -- but only through query parameters documented in the wiki,
and temperatures were not among the fields on offer. The request asked
for temperatures first and for the field set to be selectable in the web
UI; this addresses both.
Nozzle, bed and chamber readings join the list. The target is drawn only
while the heater is still climbing, so a settled hotend reads "220°C"
for the rest of the print instead of the noisier "220 / 220°C" -- 219.6
against a target of 220 rounds to the same number, and repeating it says
nothing. Both nozzles appear on a dual-nozzle machine. They are drawn
whether or not a print is running, because a preheating printer is
exactly when they are worth watching, and each reading appears only when
the printer genuinely reports one: chamber temperature stays absent on
P1 and A1 models, which publish a chamber_temper with no sensor behind
it, so the overlay never puts a measurement on screen that does not
exist. Labels reuse the heater chart's strings rather than inventing a
second vocabulary for the same three things.
The feed sends an allow-list rather than the temperatures dict. That
dict doubles as the MQTT client's working memory -- derived heater flags
and private target-set timestamps live alongside the readings -- and an
overlay token is a narrower grant than a login, so it gets exactly what
the overlay draws and does not pick up fields as the dict grows. The
same chamber-sensor gate the full status payload already applies is
applied here. The integration test that asserts the payload's exact key
set, which exists to catch that surface widening silently, is updated
deliberately.
Temperatures are not in the default field set, so an overlay URL already
pasted into a scene renders identically after upgrading.
Settings -> API Keys -> Streaming Overlay now builds the URL: printer,
field checkboxes, size, frame rate, camera toggle, an optional token,
and a copy button. It persists nothing and calls nothing new -- the URL
is the configuration, which keeps a scene reproducible by copy-paste and
lets two displays show different fields off one token. Fields are
emitted in the overlay's own top-to-bottom order rather than click
order, and parameters left at their default are omitted, so the same
selection always produces the same URL. The preview alongside it stays
off until asked for: an always-live iframe would hold a subscriber on
the printer's single camera connection for as long as the settings tab
stayed open.
The preview needed one narrow security-header change. Every SPA route
sent frame-ancestors 'none', which is stricter than the SAMEORIGIN in
X-Frame-Options beside it and refuses even a same-origin frame, so the
preview showed Firefox's "another site has embedded it" page instead of
the overlay. The overlay path now sends 'self', mirroring /gcode-viewer,
which admits a framer only on this origin -- Bambuddy's own UI. Every
other path keeps 'none', and embedding the overlay from another host
still requires TRUSTED_FRAME_ORIGINS.
Starting the dryer on an AMS 2 Pro holding two PETG and two PLA spools
and picking PLA showed "PLA @ 45°C" for about a minute and then switched
to "PETG @ 65°C" for the remaining twelve hours.
Bambu never echoes back which filament or temperature a cycle is
running, so the badge reads the target cached when the command went out,
and that cache had been dropped. Between accepting the command and
settling its countdown the firmware publishes one update with the
remaining time at zero while the unit is still in its Checking phase --
the reporter's log has 720, then 0, then 719, and four seconds later the
same unit's info hex decodes to dry_status 2, Drying. The falling-edge
detector read that zero as the cycle ending. Losing the cached target
left the badge to guess from the first loaded slot, which was PETG, and
its RFID-recommended 65°C. The same false ending fired
on_drying_complete, so anyone with smart-plug auto-off-after-drying
switched on had power scheduled to cut one minute into a twelve-hour
dry; the reporter had it off, which is the only reason this reads as a
cosmetic bug.
A remaining time of zero now ends a cycle only when the unit is not also
reporting an active phase. dry_status comes from the same info hex
already parsed a few lines above, so this costs nothing to check.
Stopping and Error are deliberately not treated as active -- those
should end it -- and a unit that reports no phase at all still ends its
cycles, so the gate can only ever suppress on positive evidence that the
cycle is live. A suppressed edge leaves the remembered dry_time alone,
exactly as the #1462 absent-value skip does, so the push that really
ends the cycle still sees a non-zero previous.
The fallback guess is tightened to match. On a mixed unit the first tray
is evidence of nothing, and naming a temperature the cycle is not using
is worse than naming none, so it now answers only when every loaded
spool is the same filament and otherwise leaves the badge showing the
countdown alone. Both the websocket and REST status builders carried
their own copy of that loop; they now share one helper, which also takes
the temperature from the first slot that carries an RFID one rather than
giving up when slot 1 holds a third-party spool.
Printing a multi-plate file in different quantities per plate meant
queueing each plate separately and tracking the counts by hand: one
shared Quantity field cannot say "plate 1 once, plate 2 twice, plate 3
three times". Each selected plate now carries its own quantity, and the
submission becomes an order on a new Batches tab.
The point is the distinction the old flat batch could not express.
print_batch_plates stores how many runs of each plate were wanted,
separately from what was queued, so a run that fails, is cancelled or is
skipped does not satisfy a target -- the order goes on saying it owes a
print instead of quietly under-delivering. Queue remaining re-queues
exactly what is missing, for the whole order or one plate, by cloning
the most recent item for that plate: that inherits the printer or model
target, AMS mapping, filament overrides and print options along with the
validation they already passed, rather than re-serialising twenty fields
through a template that would drift from the model the first time
someone adds a column. Clones append to the end of the relevant
printer's queue and take the same advisory lock the add-to-queue route
does; positions are per-printer sequences, not global.
Cost is measured, not estimated. print_log_entries gains queue_item_id,
set where the queue item is already in scope, so each run's material and
energy are attributed through the item that produced them -- an
unrelated reprint of the same archive never lands in an order's total,
and a multi-plate order gets each plate's own cost rather than the whole
file's via the plate-scoped estimate from #2614. Before any run has
completed there is no honest figure, so cost reads as unknown instead of
a fabricated 0.00.
The Batches tab wires up GET /queue/batches, which has been unreferenced
since the batch MVP shipped, along with six locale keys that were
translated and never used. It is a separate tab because an order
outlives the queue that produced it: once its runs finish they leave the
active queue, so Queue and History each hold half the picture.
completed was not a reachable status before now, so every batch created
since April is still marked active however long ago its last print
finished -- 73 of them on the development install. A startup pass closes
out the finished ones: those whose runs all completed become completed,
and groupings whose items were all cancelled become cancelled, which is
what they are. Not applied to orders, which state their intent
independently of their runs and still owe the work. Only batches with
nothing queued or printing are considered, and repeating the pass also
catches an order whose last run landed while the process was down.
Batches with neither items nor targets are no longer listed at all --
empty shells left when a grouping's items went with their source
archive.
Dispatch applies the same source-file gates as POST /queue/. It creates
queue items, so without them it would be a weaker door to the same
outcome; the archive and library-file checks move into shared helpers
so a third route cannot drift from them.
Dispatching to an X2D with two AMS units mid-drying failed silently: the
file uploaded, the printer accepted it and stayed idle. The watchdog waits
for an active state or HMS_MQTT_VERIFY_FAILED, and a drying refusal is
neither, so it timed out, re-uploaded the whole 3MF twice more, and closed
with advice about the printer screen and the SD card. Studio, asked
directly, said it could not start the job because of the drying.
Latch the AMS dry_time telemetry across both watchdog phases and name the
units in the give-up message, plus an INFO log on every failed window so
the correlation reaches a support bundle from the first attempt.
Detection only, no gate. These models support drying CONTINUING through a
print (supports_drying_while_printing covers X2D from 01.01.00.00), so
drying is not incompatible with printing and stopping it before every
dispatch would tear down cycles the hardware is happy to run. One of the
two units was also drying without its external PSU, which would make this a
power budget problem at start-of-print calibration rather than a drying one
-- dry_sf_reason 1/8 exist for exactly that. The message names both
possibilities rather than asserting one.
Also correct _sync_drying_state's docstring, which claimed to adopt drying
it did not start; it only prunes. Behaviour unchanged -- populating it would
let the scheduler stop a cycle the user started by hand.
The Virtual Printer binds 990 and 322, below 1024, which a service running
as a normal user may not do without CAP_NET_BIND_SERVICE. Without it the
rest of Bambuddy works and only the VP is dead -- sockets never open, the
slicer never finds the printer, and the sole trace is one journal line.
332a7c6ac added the line to install/install.sh in March under the heading
"Fix install.sh missing AmbientCapabilities". Three other places define the
same unit and none of them got it: the manual template, the combined
Bambuddy + SpoolBuddy installer, and the unit the wiki tells you to paste.
The wiki additionally claimed the capability was always included.
Also diagnose it. The VP diagnostic reported only that nothing was listening
on 990, which reads identically to a port conflict. It now checks CapEff for
the capability and names it as the cause -- but stays quiet when the port is
answering (an iptables REDIRECT is the documented alternative and that host
works) and when the capability is held (the port is down for another reason
and blaming this would misdirect). Skips where there is no procfs rather
than putting a systemd instruction in front of a macOS user.
Configuring a slot publishes ams_filament_setting and the printer answers
with a verdict. The answer was received and dropped at DEBUG, so a refusal
left no trace at the level support bundles are collected at: the reporter
saw six Configure Slot attempts on an X1C all return success, all read back
by the #2582 verification as holding the previous profile, and no record of
what the printer said about any of them.
Promote a non-success response to INFO with result, reason, ams_id and
tray_id. Refusals only -- unlike extrusion_cali_set (#2718) and
ams_filament_drying (#1447) this command is not rare, since every spool
assignment and K-profile re-apply sends one, so promoting each ack would
bury the interesting line.
The developer-mode probe is excluded: it sends this same command to the
external slot expecting a refusal on P1 firmware, so promoting it would
put an alarming line in every P1 bundle on every reconnect. Matched by
sequence id, which user commands cannot collide with -- they publish a
hardcoded "0".
Diagnostics only; no change to which commands are sent or how they are built.
Printer status, query invalidations and the message queue all ran their
work inside requestAnimationFrame. A hidden tab gets no rendering
opportunities, so the browser holds those callbacks instead of merely
throttling them: the socket stayed open, messages kept arriving, and
every cache write parked in a pending frame until the tab was shown
again — at which point they all ran at once. The tab-title progress
reads ['printerStatus', id] and nothing else, so it simply froze.
The frames came in with the print-completion freeze fix, where the
load-bearing part was the coalescing (100ms throttle, 3s debounce,
500ms stagger). That is untouched; the frames only deferred each write
by ~16ms and are gone. Not made visibility-aware on purpose — a frame
scheduled just before hiding would fire after the writes that took the
hidden path and clobber newer status with older.
The six rAF stubs in the tests ran frames synchronously, which is why
nothing caught this. Replaced with coverage that stubs rAF to never
fire, as a hidden tab does.
The floating disc is pinned bottom-right, which is where most controls
live — it covered ~83% of the Profiles scroll-to-top button at the same
z-index, and being viewport-fixed it also sits on card action buttons
that scroll under it. Below the sidebar-compact breakpoint the trigger
moves into the top bar; at 1144px and up nothing changes.
Not a hide switch: the bubble is the only entry to the report form, and
that form runs the printer diagnostic, the log scan and the debug
capture. Hiding it yields reports with nothing attached.
The panel stays at the Layout root — the header is a fixed z-40
stacking context and would bury a nested z-50 panel under every modal.
Also fixes the panel hanging 16px off-screen on phones: w-full resolves
against the viewport, so right-4 pushed its left edge negative.
The Color column was missing from the page's sort-extractor map, so its
header ignored clicks. Sorts by family first — rainbow, then browns,
then neutrals light to dark — with the hue sort running inside each.
The issue asked for a straight hue/saturation/lightness sort. Measured
against a real 30-spool inventory that puts Titan Gray (hue 210, sat
0.04) among the blues and a warm grey next to the reds, and splits the
oranges around brown. Neutrals order by lightness because their hue is
noise.
Families come from the classifier that already names colours missing
from the catalog, so the Color and Color Name columns cannot disagree.
The printed command only works from the directory holding the compose
file, which is the thing the user came to the page not knowing. Adds a
copy button, a saved Compose directory setting, BAMBUDDY_COMPOSE_DIR,
and best-effort detection from a bind mount's host path.
Compose records the directory on every container it creates, but reading
that label needs the Docker socket mounted in — root-equivalent access
for a convenience string. The mountinfo guess is a prefill only: its root
field is relative to the mounted device, so a compose dir on its own
mount loses that prefix, and nothing in the container can detect it.
The field is restricted to path characters. It is the one setting whose
purpose is to be pasted into a root shell, so "/opt/bambuddy; rm -rf /"
would otherwise render as a plausible update command.
The list and update endpoints serialised field by field and never named
cost / energy_kwh / energy_cost, so values Bambuddy had been recording
all along went out as nulls. Both now validate from the ORM row, which
removes the chance to omit a field rather than patching the three that
were missing.
Adds a Filament Used column plus a Columns picker for Cost, Energy,
Energy Cost and Finished, persisted per browser.
Also fixes the log view being unreachable with zero archives: the empty
state ran before the view check, hiding a log that outlives the archives
it refers to.
---
Sort the Print Log by any column (#2636)
Adds sort_by / sort_dir to the print-log endpoint, driven by clickable
column headers. Server-side because paging is: ordering the rows the
client holds would sort one page rather than the log.
Empty values are held last in both directions — Postgres sorts NULLs
high and SQLite low, so the same click would otherwise open on blanks
on one backend and values on the other. id DESC breaks ties so paging
through a low-cardinality sort can't repeat or skip a row.
Both are per-slice checkboxes, off by default, forwarded as the sidecar's
orient / arrange form fields. An unticked box is sent by omission: the
sidecar treats any present value as truthy, so a literal "false" would
have arranged every slice.
Arrange unions with the #1493 cross-class decision rather than replacing
it, and the per-plate slice-all loop is now keyed on the arrange flag
itself — the project-wide collapse belongs to --arrange, not to the
cross-class case. The loop also covers the embedded-settings path, whose
crash-retry is suppressed there since a single --slice 0 retry would
return one consolidated plate.
The edit dialog offered a printer picker and target-model dropdown for
an item with alternatives. Saving left a row with variants AND a
printer_id, and the scheduler's fixed-printer branch wins that race, so
it dispatched a row whose library_file_id is still null and failed in
the upload. PATCH now refuses printer/model changes on such an item —
comparing against the current value, since the dialog re-sends
target_model unchanged — and the route eager-loads variants, without
which the guard could not see them and every PATCH response dropped the
alternatives from its payload.
Names come from a shared helper now. A cross-model item holds neither
archive_id nor library_file_id until dispatch, so five separate inlined
fallbacks all rendered "File #null"; they now read "x1c.gcode.3mf +1
more".
The queue also grouped these under "Any H2D" — the first candidate
mirrored onto the row — filing a job under a printer it might never run
on. It groups as "Any H2D / X1C", matching the row beneath it.
Selecting several sliced files and pressing Print now creates one queue
item carrying all of them, instead of hiding the Print button the moment
a second file is selected. The printer picker is replaced by the ordered
candidate list, since choosing these files is already the answer to
"which printer" and the only question left is which is preferred.
Per-candidate configuration is the plate only. Model-based assignment
sends no AMS mapping — the printer is unknown until dispatch, where the
scheduler derives it — so a per-candidate mapping editor would collect
choices it then discards. Filament overrides stay shared: "this job
needs PETG" holds for every slice of the same job.
Adds Group as versions for durable grouping, a versions badge counting
the whole group rather than the rows on screen, and a queue card label
naming every model a pending item is waiting on.
Adds /library/variant-groups for declaring that several sliced files are
the same job for different printers, and a variants payload on queue
creation that turns such a set into one queue item with a candidate per
file.
The candidate set is validated as a set: one file per printer model, each
file sliced for the model it is offered as, and at least one model with
an active printer. A cross-model item deliberately holds no file of its
own, because print_queue.library_file_id is ON DELETE CASCADE and would
destroy the whole job when a single alternative is deleted.
Fixes internal printer-model codes never being resolved on queue create
and update: normalize_printer_model returns unknown input unchanged, so
the or-chain never reached the code map and a "C13" target matched no
printer and waited forever.
Skips candidates whose file is trashed or missing. Library deletes are
soft, and SQLite runs with PRAGMA foreign_keys off, so neither case is
covered by the schema; the hard-delete paths now also drop the rows.
Adds library_files.variant_target_model so a user can say which printer
a file without slicer metadata is for, kept out of file_metadata so the
assertion is never mistaken for parsed data.
Adds print_queue_variants: the candidate files a queue item may run, each
with its own model, plate, AMS mapping and nozzle mapping. The scheduler
walks them in priority order and takes the first whose model has an idle
printer, then folds that candidate onto the queue row before the
selection commit — so upload, archive creation, print history and reprint
keep seeing an ordinary single-file item.
Candidates are ordered least-attempted first, so a printer that accepts
the file and never starts hands the job to the alternative on the next
lap instead of spending the item's whole retry budget on the machine
that is wedged. The item-level DISPATCH_MAX_ATTEMPTS bound is unchanged.
An item whose candidate files have all been deleted is held pending with
an actionable reason rather than failing deep in the upload, and waiting
notifications name the job and every model it is waiting on.
Adds file_variant_groups plus variant_group_id / variant_position on
library_files, so a set of files that are the same job sliced for
different printers can be resolved to whichever printer frees up first.
Backfills groups from the sliced_from_library_file_id provenance that
slice_and_persist and the pipeline runner have been writing into
file_metadata since they shipped, and which nothing has ever read.
Only sources with two or more children carrying distinct
sliced_for_model values are grouped: a single candidate is not a
choice, and two slices for the same printer give the resolver no basis
to prefer one.
The param was a bare bool, so /docs showed an undocumented boolean on
both upload routes. #2609 is about external integrations, and the
interactive docs are where those callers look — a docstring only reaches
someone reading the source. Wraps both in Query(False, description=...),
matching how this file documents its other query params.
Also records why these two routes take the flag per-request while the FTP
review flow and virtual-printer dispatch derive it from the VP-scoped
virtual_printer_archive_name_source setting, and drops the db_session
fixture the four new tests requested but never used.
Every field that takes a chamber target stopped at 60: the per-filament
chamber map and per-print override in Preheat & Heat Soak, the chamber
quick-select presets, and the printer-card chamber control. 60 is the
X1E's ceiling and the X1E was the only heated-chamber model when that
limit was written; the H2 series and X2D heat to 65, so the top of their
range was unreachable.
The ceiling now lives in one constant per side (MAX_CHAMBER_TEMP_C in
backend/app/utils/printer_models.py and frontend/src/utils/printer.ts)
rather than as a literal at each call site. X1E firmware clamps a higher
request to its own maximum, so a shared ceiling is safe.
Also fixes a live bug at PrintersPage.tsx:7985: parsePresetTriple was
bounded to 60 there, and it rejects the whole triple on any out-of-range
entry, so a saved 65 preset would have silently reverted the printer
card to the defaults while Settings still showed 65.
Maintainer review on #2610 flagged that upload-bulk would diverge from
upload if only the single-file route got the flag. Applies to every
file in the batch, same default-off behavior.
verify_totp fetches a CSRF token from the bambulab.com web origin before
posting the code (#2696) and returns early when it cannot get one. These
tests patch only post, so the pre-flight GET went out for real: it succeeded
wherever bambulab.com was reachable and returned a tokenless 403 on a CI
runner, where six tests then asserted on a post that never happened.
Stub the handshake for the module. It is covered end to end, no-token path
included, in tests/unit/test_cloud_totp_csrf.py.
unbounded repetition the match was quadratic in the subject length: on a run
of scheme-legal characters the engine restarted at every offset and consumed
to the end before failing to find "://". ffmpeg echoes the configured camera
URL into its stderr and the whole blob reaches the pattern before any
truncation, so the subject length is attacker-influenced.
jmoore-skild