mirror of
https://github.com/maziggy/bambuddy.git
synced 2026-09-30 03:01:21 +02:00
b9bd3128268e95aa93df5852b0a88888475b262d
4230
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 maziggy
|
b9bd312826 |
fix(slicer): keep protocol-handler download tokens valid for their whole TTL (issue #3029)
The Slice and Open in Slicer actions mint a short-lived token and put it in the URL, because a protocol handler cannot carry an Authorization header. That token was spent by the first request to reach the endpoint, which made the handoff depend on the slicer fetching the URL exactly once. Nothing guarantees that: Bambu Studio's downloader retries three times after a failed attempt, transfers get resumed, on-access scanners fetch. The first request won and the slicer was handed a 403. verify_slicer_download_token takes a keyword-only single_use flag. The default still consumes via DELETE...RETURNING; single_use=False verifies with a SELECT and leaves the row for the rest of its five-minute TTL. The stored row is the same either way, so the endpoint decides, not the mint. The three protocol-handler downloads pass single_use=False: a library file, an archive's sliced 3MF, an archive's source 3MF. Resource binding and expiry are untouched. The two browser downloads keep consuming, because what they hand over is itself consumed -- the prepared printer bundle is deleted the moment it has been streamed. Also: add "/source-dl/" to PUBLIC_API_PATTERNS. Those patterns match by substring and the source 3MF route's segment is source-dl, which does not contain "/dl/", so with auth enabled the middleware rejected the slicer's header-less request before the route's token check ran. Open source 3MF in slicer could never work on an install with authentication on. |
||
|
maziggy
|
816f073a9e |
fix(auth): decouple media routes from the camera stream token (issue #3025)
Thirteen routes with nothing to do with a camera took the camera stream
token as their credential -- library and archive thumbnails, plate
previews and plate thumbnails, timelapses, print photos, archive QR
codes, project covers, print-log thumbnails, printer covers and
external-link icons. A browser cannot put an Authorization header on an
<img src>, so these need a credential that fits in the URL, and the
camera token was the only one that existed. Minting one costs
camera:view, so a user granted library access to their own files got a
grid of broken images until they were also handed the live camera.
Adds a media token: minted by POST /auth/media-token behind plain
authentication, and identified -- it records the principal the way the
websocket token does rather than being anonymous the way the camera
token is. Each route now gates on the permission and ownership rules of
the resource it serves, through the same _ensure_*_visible helpers its
header-authenticated siblings already use. The three camera routes keep
the camera token, and require_camera_stream_token_if_auth_enabled now
documents that it is for those only.
The media dependencies accept ordinary Authorization / X-API-Key headers
as well as ?token=, delegating that path to the existing checkers, so
API-key scope rules and the per-printer allowlist are unchanged.
Long-lived camera_stream, camwall and overlay tokens are deliberately
not accepted on the media routes -- those are handed to kiosks, walls
and Home Assistant to display video. The cam wall, streaming overlay and
kiosk views use only the three camera routes and are unaffected.
Frontend: withMediaToken alongside withStreamToken, and
useStreamTokenSync fetches a media token for every signed-in user while
asking for a camera token only when the user can mint one, which also
stops the 403 that fired on every page load for everyone else.
Also fixed, same class:
- /printers/{id}/files/plate-thumbnail/{i} is rendered in an <img> but
had a header-only guard, so the file manager's plate thumbnails 401'd
whenever auth was enabled. It now takes a media token too.
- getProjectCoverImageUrl returned a URL ending in ?token=, and the
project edit dialog appended its own ?v= cache-buster after it, so the
second ? landed inside the token value. The version is now a parameter
applied before the token.
Tests: 15 integration tests for the token boundary, permission
enforcement and per-row scoping; 10 frontend tests for the URL split and
the two-query hook. test_cover_image_get_uses_stream_token_gate is
renamed and repointed at the media gate -- what it pins, that the
credential has to fit in a URL, is unchanged.
|
||
|
maziggy
|
93eeb05264 |
fix(auth): let the sidebar read install flags without settings:read (issue #3023)
cost_centers:read_own exists so a non-admin can see their own wallet, balance and cost-centre spend, and the Finance page honoured it -- typing the URL worked and rendered their balance. The sidebar never offered the entry. It decides whether to show Finance by reading billing_enabled from GET /settings, which requires SETTINGS_READ. A non-admin gets 403 there, so the value arrived undefined, `undefined !== true` held, and the entry was hidden from precisely the users the permission was written for. The permission map and the route guard were both already right; only discovery was broken. Three more fields came from that same 403, and one of them failed the other way up. The Notifications gate tests `=== false`, which undefined never satisfies, so an administrator who switched user notifications off still left the entry showing to the non-admins it governs. Nobody reported that one, and no administrator could have reproduced either: administrators can read /settings. The remaining two were quieter -- the sponsor prompt fell back to EUR whatever the install uses, and the update check ran where it had been turned off. SETTINGS_READ cannot be the price of knowing whether billing is on. It also grants sight of the SMTP, LDAP and MQTT credentials, which is the reason /settings/ui-preferences exists at all. So: a second endpoint, GET /settings/ui-flags, carrying those four fields and asking only that the caller be signed in, via the existing require_auth_if_enabled. Layout drops its /settings query altogether, which closes the class rather than the two instances that happened to be visible. Deliberately not four more fields on /ui-preferences. That endpoint is served to anyone at all on the recorded grounds that its contents are "public defaults that ship with the app" (test_route_auth_coverage.py), and its field set is pinned by a test written to make anyone adding to it stop and think. These fields are not defaults -- they say how this deployment is configured -- so they get their own endpoint at their own trust level instead of stretching that charter to fit them. require_auth_if_enabled also keeps the auth-disabled case that /ui-preferences was ungated for: "works when there is no auth" and "readable by anyone" are different statements, and conflating them is what put a settings read in front of a permission that never needed one. Twelve tests. Backend pins that the operator can read the flags, that the same operator still gets 403 from /settings, that an anonymous caller is refused when auth is on, that it answers when auth is off, the exact field set, that no credential ever appears, and that the public endpoint did not quietly gain these fields. Frontend pins Finance visible for cost_centers:read_own with /settings returning 403, and Notifications hidden when the flag is off -- each waiting on a positive signal before asserting an absence, so the negative cases cannot pass before the query resolves. Reported by @lonix, who traced it to the queryKey and the route gate. |
||
|
maziggy
|
09b4584d5f |
fix(queue): say when an unscheduled item runs instead of calling it ASAP (issue #3018)
The print dialog offers ASAP, Queue and Schedule. ASAP and Queue differ only in where the item is inserted, and neither is stored on the item -- scheduleType is a frontend-only concept, and grep finds no "asap" anywhere in the backend. So the queue's time column had nothing to read but scheduled_time, and labelled every unscheduled item "ASAP": the name of the one mode the user may well have chosen against. Someone who picked Queue then watched their row appear as ASAP and start immediately, and concluded Bambuddy had overridden them. Two reporters wrote that same sentence thirteen months apart, and #2557 was closed as A2L-specific after the first of them -- kilrah replied there with an X1C before filing this. The column answers when an item runs, so it now says that. The key is renamed whenFree rather than just retranslated: left called asap, the next translator puts ASAP back. The dispatch is unchanged, because it was right. A print scheduled for later does not reserve the printer until then; an unscheduled item behind it uses the idle printer rather than leaving an X1C dark until 6 AM. Two of the new tests pin that, so it does not get "fixed" later on the strength of a report like this one. What genuinely could not answer the question was the queue's own log. Its per-printer line called every entry in busy_printers "not available" -- but that set holds both printers that cannot take work and printers the pass has just claimed for some, which are opposite facts. It also read printer state at logging time rather than at the decision, so #3018's bundle carries Queue: printer 1 not available — connected=True, state=IDLE, ... Launching 1 upload(s) (pool 0/4 in flight) Starting queue item 18 a printer reported unavailable, evidence that it was available, and a dispatch to it, in three consecutive lines. It is the first line anyone greps for "why did my item not go out". Each of the nine sites that removes a printer from a pass now records why, and the summary reports a claim as a reservation and everything else as an obstruction with its reason. The live fields stay, since a bundle reader wants them next, but are labelled as read now rather than offered as the cause. print_scheduler.py:1210 already documented that these two meanings differ -- the dispatching_printers snapshot exists for it. This carries that distinction into the log. |
||
|
maziggy
|
6564c74071 |
fix(archives): report a refused FTPS handshake as the printer, not the slicer (issue #2780)
The Archives banner picks its wording from a priority list of the causes it knows. REASON_FTPS_COOLOFF was added by #2957 and never put in that list, so an install whose empty archives all came from a printer refusing the TLS handshake matched nothing, got reason: null, and fell to the original wording: the slicer did not leave the .gcode.3mf on the card, switch on "Store sent files on external storage", here is installation step 4. Every clause of that is wrong for this cause. The slicer did write the file -- reason he read the whole thing as Bambuddy being broken. The setting was already on. And there is nothing on his side to change: the printer's file service answered port 990 with something that is not TLS, so no lookup ever ran and where the file went was never tested. It is #2899's mistake -- an error message describing a cause that was ruled out before it was printed -- in a surface that did not get that pass. The slug now leads the list rather than joining the end of it. The other three describe an install working as configured and each ends in something the operator can change; this one reports a fault nobody can yet explain, which is both the more urgent thing to say and the thing that produces a useful report. The banner also dismisses one-shot into localStorage, so a reason ranked below another is not deferred to next time -- it is never shown to that user again. Ranking it first cannot bury a permanent cause in exchange: a successful recovery clears the row's markers (#2957), so a row still carrying this slug is one whose retry failed too, days after the print. New wording in all fourteen languages says the printer refused the connection, that this is not a slicer setting and not something the operator did, that Bambuddy comes back for the file when the five-minute pause clears so a brief episode fills itself in, and that a card still empty means the refusal outlasted the retry. It links to the handshake entry in the troubleshooting guide instead of to the installation guide. The client's getNo3MFWarning type still declared the old three-slug union, which made all three new comparisons provably dead -- caught by tsc, not by any test. Four tests. One pins the slug reaching the banner, one pins it outranking the three settled causes, one pins those three keeping their order behind it, and one asserts the rendered wording carries no slicer advice at all. Also corrects the wiki page these reports are pointed at. It said to power-cycle the printer; the reporter who prompted that advice power-cycled both of his and the failure continued unchanged, and bambu_ftp.py has carried the retraction in a comment since. The page now states what was actually measured -- that a version mismatch reports itself differently, that every printer probed refuses TLS 1.3 and completes on 1.2 so there is no version to fall back from, and that three P2S units failed while three more on the same switch never did -- says plainly that the trigger is unknown, and names the one cleartext-probe line worth collecting. |
||
|
maziggy
|
10f0900fbc |
feat(ftp): log how every FTP session closes (issue #3009)
disconnect() and _abandon_connection() logged nothing, at any level. A session closed cleanly and a socket genuinely abandoned therefore produced identical output -- none -- and the only way to tell them apart was to read the source. That is how #3009 was filed. Its trace shows a print completion opening two FTP connections, deleting one file, and then nothing until the printer was powered off 21 minutes later, read as connections left open and offered as a mechanism for the 0500-C010 SD-card error that #645 has been chasing since April. The two connections are the post-print SD cleanup in main.py walking its candidate filenames, each through delete_file_async, which closes in a finally; running that against the mock FTPS server shows the server logging "FTP session closed (disconnect)" for both the 250 and the 550, holding zero sessions afterwards. Nothing in a support bundle could have shown that. Both close paths now log one DEBUG line: the printer, whether QUIT was acknowledged or the socket had to be dropped without it, why, and how long the session was held. Every connect in a debug log now has a matching close. The duration comes from a stamp taken when the control socket opens rather than after login, so a session that dies during login is accounted for too; where no socket was ever established the line says "held unknown" rather than claiming a number. The four connect() failure paths pass their own reason, so a close line stands on its own next to the warning above it. Nine tests, seven of which fail against the unlogged version. The other two assert silence -- a bare disconnect(), and a connect skipped by the handshake cool-off -- where no socket was opened and a close line would pair with no connect. |
||
|
maziggy
|
f3b1c59169 |
fix(orca-cloud): close the HTTP client when an authenticated build fails
OrcaCloudService owns an httpx client from construction, and every path in _build_authenticated_service after that point can raise: no stored refresh token, a rejected refresh, an unreachable Orca, and the token-rotation write. On success the caller closes the client. On failure nobody is ever handed it, so all four paths leaked one into the connection pool. That went unnoticed while the only callers were routes, where the trigger is a person retrying a broken sign-in a handful of times. It stopped being harmless in |
||
|
maziggy
|
9434875fa1 |
fix(ams): resolve a custom filament's own id from every preset source (issue #3003)
A custom filament profile reaches an AMS slot as itself through exactly one field, tray_info_idx, and every source we can read that id from was reading it from the wrong place or not reading it at all. Bambu Cloud returns a preset's own filament_id either on the response envelope or inside the preset JSON under `setting`, and only the envelope was read. Presets of the second shape fell through to the base_id branch and reached the slicer as the Bambu filament they inherit from. filament_type next door already handled both spreads; filament_id now does too. Orca Cloud was absent from the resolver entirely. A spool stores the bare profile UUID, which matched no branch and fell through normalize_slicer_filament -- a function that passes anything it does not recognise straight through -- so a 36-character UUID went into the field. Orca profiles carry their own filament_id in the slicer JSON that OrcaProfileDetail already exposes under `setting`, so the lookup is the same one the Bambu branch does. It is best-effort: no pairing, a dead token or a missing orca_cloud:auth permission degrades to the fallback rather than failing the assignment, and it passes clear_on_auth_failure=False because a background caller cannot tell a real revocation from a lost refresh-rotation race. configure_ams_slot sent the cloud setting_id as tray_info_idx when it found no real filament id. That field is 8 characters on the printer -- exactly the width of a local preset id, less than half a cloud one. Measured on the reporter's A1: sent PFUS9ddc938fe3ab8f, the tray read back PFUS9DDC, acknowledged as a success. The slot then resolved to nothing, so the slicer showed Generic anyway and the calibration table, keyed by the same field, lost the slot. It now falls back to the slot's existing filament id or the generic for the material, and the route's guard was aligned with the resolver's so both refuse the same four shapes from one shared definition. This reverses the contract #1053 pinned. Six tests asserted that the PFUS belonged in tray_info_idx; the A1 capture shows it never worked, so they were rewritten with the measurement in their docstrings. Verified against 874 AMS trays across twelve models in the support archive: 92 already carry a custom "P" + 7 hex filament id, which is what confirms the mechanism works and this is a lookup failure rather than a platform limit. No tray on any model carries a setting_id, so a profile with no filament_id of its own still cannot be told apart from its base. |
||
|
maziggy
|
5ab0a4cb11 | fix(ui): make hover:text-white theme-aware so light-theme labels survive hover (issue #1909) | ||
|
maziggy
|
f879dd552a | Updated BACKERS | ||
|
maziggy
|
4b857d9e06 |
(security): Bumped fflate to 0.8.3 for a denial-of-service advisory reachable through three's compressed-format loaders (GHSA-px8p-9vwx-vf98, #3034)
|
||
|
MartinNYHC
|
3fb41a709a | Merge pull request #3034 from maziggy/dependabot/npm_and_yarn/frontend/npm_and_yarn-c46cce24cb | ||
|
maziggy
|
abf75e836b | deps(frontend): bump browserslist and @humanfs/node for dev-scope advisories | ||
|
maziggy
|
8f7f18b3c2 |
deps(frontend): move the Tiptap stack to 3.31.1
GHSA-cp6q-959q-f8rh: @tiptap/core's mergeAttributes() copies keys out of Object.entries() with plain bracket assignment, so an own __proto__ key from JSON hits the legacy prototype setter rather than writing a property. The result carries an attacker-controlled prototype while Object.keys() and own-property checks show nothing, and ProseMirror's DOMSerializer.renderSpec() enumerates attribute objects with for...in -- so inherited src and onerror land on a rendered <img> and execute. Medium, CVSS 4.0 6.4, fixed in 3.30.4. Not reachable here. The advisory needs an untrusted object arriving at mergeAttributes(), or a custom or dynamic extension that preserves the attribute object. Nothing under frontend/src calls mergeAttributes or defines an extension, and RichTextEditor builds a fixed schema from StarterKit plus six stock extensions whose HTMLAttributes are static literals. Content crosses as an HTML string rather than JSON, so no own __proto__ key reaches an attrs object at all -- the DOM parser only fills attributes the schema declares -- and every read-only render is sanitized. Lockfile only: package.json already declared ^3.11.1, so the patched line was inside the range and only the stale lock held 3.19.0. No overrides entry needed. @tiptap/pm has narrowed its dependency set, so prosemirror-markdown, prosemirror-menu, prosemirror-collab, prosemirror-schema-basic, prosemirror-trailing-node, markdown-it and linkify-it leave the tree -- 16 packages, none imported by this repo. That retires the reachability note carried for linkify-it in 1.2.5. eslint, build with the Safari 16 baseline check, i18n parity and 3514 frontend tests across 256 files all pass. npm audit --omit=dev, which is what CI gates on, reports zero vulnerabilities. |
||
|
maziggy
|
e0a2398783 |
ci: balance the backend test shards by measured time, not test count
Backend Tests (shard 1/4) timed out after 10 minutes on
|
||
|
maziggy
|
e03271215b | Updated BACKERS | ||
|
maziggy
|
0dfcff5925 |
Keep the RTSPS proxy's handler set off the server object (issue #3001)
asyncio's Server has a __dict__ and uvloop's, a Cython cdef class, does not, so the attribute added in 1.2.5.4 raised AttributeError under uvloop. Every RTSP camera failed before opening a socket, which is the diagnostic's capture_exception at 0 ms. Our own unit files all pin --loop asyncio for #1896 and were never affected. The reports come from units we do not write: the Proxmox VE Helper-Scripts LXC pins no loop, and installs predating that fix never gained the flag because update.sh does not rewrite unit files. The loop is not ours to assume, so fix the code rather than add another flag. The set moves to a module-level WeakKeyDictionary, keyed weakly so an abandoned proxy retires its own entry rather than leaking one and later handing a new server a dead one's handlers. Pinned on a real uvloop loop and, for hosts without uvloop, against a __slots__ server; conftest builds its loop from the default policy, so nothing in the suite had ever run the branch that broke. Also routes the two external-camera teardowns through close_tls_proxy, which #2968 introduced and left them out of. ----- Say so at startup when running on uvloop (issue #3001) An install on the wrong loop had no way to find out it was. #3001 was loud enough to notice; the #1896 upload truncation it is also exposed to is silent, and shows up as a print failing from a file that was corrupt on arrival. One WARNING in the lifespan naming the loop, the risk and the flag to add. A warning and not a refusal: uvicorn has already chosen its loop by the time any application code runs, and a server that answers requests beats one that will not boot. Asks the running loop what it is rather than whether uvloop imports -- uvicorn[standard] installs uvloop everywhere, so its presence says nothing -- and matches on the module name so the question never imports uvloop on a host without it. ----- Repair a service file written before the --loop asyncio pin (issue #3001) install.sh has pinned the loop since #1896, but nothing has ever rewritten an existing service file, so every native install created between 2025-11-28 (when uvicorn[standard] brought uvloop into the venv) and 2026-07-05 still runs on uvloop no matter how often it is updated. Both update scripts now add the flag themselves while the service is stopped, so it takes effect on the same restart -- systemd via sed, launchd via PlistBuddy, each backing the file up first and inserting nothing but the flag. Refuses to edit and explains instead when the shape is not a plain single-line uvicorn unit: a wrapper script, a continued ExecStart, several of them, a read-only file, or a service with drop-ins, since a drop-in may be what defines ExecStart and editing the fragment would change nothing while reporting success. A deliberate --loop uvloop is left alone. Reads the effective ExecStart from systemd rather than the file, so it is idempotent. |
||
|
maziggy
|
3f1ed85791 | Housekeeping | ||
|
maziggy
|
49c948d01a |
Pin the TLS floor on the cleartext-probe test's context
CodeQL reports the context as allowing TLS 1.0 and 1.1, and it is right about the mechanism: create_default_context() leaves minimum_version at MINIMUM_SUPPORTED, which is the build's floor rather than a guarantee. That is the reason every context in backend/app pins it, the reason bambu_ftp.py carries a comment saying so, and the reason this same file already pins it for the TLS-1.3 case further down. Line 127 was the one that did not. The floor cannot change what the test measures. The fixture answers with a plain FTP banner and speaks no TLS, so the handshake still fails as WRONG_VERSION_NUMBER, which is the assertion this test exists to make. |
||
|
maziggy
|
9d35a4e8c6 |
Mark four test-side bandit false positives
The PR gate reported four new alerts, all in test code. A fixture's /tmp/x.3mf is a column value the migration under test UPDATEs, not a path anything opens. Two f-string statements interpolate column names from a literal list declared two lines above, with the id bound - a column name cannot be a bind parameter, which is why it is written into the string at all. The two joins move onto their own lines because a trailing marker would have taken line 64 past the 120-character limit. The fourth is a near miss rather than a finding: the line below it already carries the marker, as do four other wildcard sites in the same file. The wildcard is what that test exists to assert about. |
||
|
maziggy
|
f918b4b1f3 | Merge remote-tracking branch 'origin/main' into 1.2.5.4 | ||
|
maziggy
|
c5f552921e | Updated CHANGELOG | ||
|
maziggy
|
909b9cb135 | Updated CHANGELOG | ||
|
maziggy
|
0eb8d4b22f |
Mark the failure-reason migration's table name for bandit too
The line carried a noqa for ruff's S608 but nothing bandit reads, so the same rule was silent in one tool and reported as a medium SQL-injection finding in the other. Nothing is interpolated but `table`, which the loop takes from a literal tuple on the next line; the key and the label list are both bound parameters. A table name cannot be one, which is why it is written into the string at all. |
||
|
maziggy
|
9755e08077 |
Decide whether a 3MF is sliced by looking inside it (issue #2993)
An archive that showed the green GCODE badge could re-import into the
File Manager as a source-only project with no Print button, seemingly at
random.
Nothing was ever lost from the file. The download serves the stored
bytes verbatim and the G-code was still in the zip; the two sides simply
asked different questions. Archives looked inside the file. The library
looked at the filename. So a sliced 3MF stored as Foo.3mf rather than
Foo.gcode.3mf earned the badge and lost the Print button, and which one
you got depended on how the print had reached the printer -- a slicer's
LAN send names it .gcode.3mf, a per-plate export or a cloud-dispatched
print does not.
Both sides now ask one shared predicate about the zip itself, and every
route into the library classifies on content. Only the central directory
is read, and only when the name has not already settled it, so ingest
costs nothing extra -- the external scan opens each 3MF for its
thumbnail regardless. Rows already stored are re-checked once, internal
ones only: an external row points at a mount that may be slow or absent,
and startup is the worst place to discover that.
The Slice action moves with it. Its refusal to slice an output was as
name-bound as the Print gate, and without that a file that correctly
gained a Print button would have offered to re-slice its own G-code.
|
||
|
maziggy
|
f616a6bca9 |
Show the spool that is in the AMS slot, not the one that was
Pull a Bambu ABS Orange out of A1, put a PLA Matte Dark Blue in, and the
slot card still read "Bambu ABS" against the new colour until the page
was reloaded.
Three things stood between the swap and a correct card.
The RFID auto-assign rewrites the slot's slot_preset_mappings row and
then broadcast an event that refreshed everything except the query that
reads it. Only the manual assign path invalidated that one.
Those queries then sat behind the 3s cascade debounce, which exists for
print completion, where one event fans out across half the app. A swap
touches one slot and the user is standing at the printer looking at the
card; worse, the timer restarts on every further event, so a busy moment
could defer it indefinitely. Slot changes now invalidate immediately.
And the card trusted the stored preset over live telemetry outright.
That priority is why a hand-picked preset name stays on a slot, but it
also let a cached row outrank what the printer was reporting. The row is
now skipped when it names a different official Bambu filament than the
tray does, so the card is right from the status push alone. User and
local presets carry ids that genuinely cannot be compared and are left
exactly as they were.
Spoolman mode was the worse half of the same bug: its AMS sync writes
the same row but announced nothing at all, so there was no event to
refresh on. It now reports each slot it changed or cleared.
|
||
|
maziggy
|
2b3fe10a64 |
Let sub-project groups be collapsed on the Projects page (issue #2991)
A project with sub-projects drew every one of them expanded, at every
level, with nothing to shut. Over a three-level hierarchy and a couple of
hundred archives that makes the page one long scroll.
Each group's caption is now a chevron that folds that group, and a
Collapse pill next to the status filter tabs sets the default for the
page and is remembered across reloads. A shut group takes one grid cell
rather than a full-width row, so folding a deep tree actually gets the
page back.
The count on the caption is of the cards nested there, not the parent
card's badge: the API counts sub-projects across every status on purpose,
so under the Active filter the badge can legitimately say 2 where one
card unfolds. A count that disagrees with what unfolds is worse than no
count at all.
|
||
|
maziggy
|
049afea980 |
Refuse a same-named 3MF that contradicts the running print (issue #2957)
When a print's own 3MF cannot be fetched the usage tracker borrows one from the
library or a previous archive, matching on the filename stem. That is far weaker
evidence than it looks: Bambu Studio writes the printer-side filename from the
project's Title metadata, so every plate of a project reaches the printer under
one name however the file was renamed on disk.
The reporter's single-filament job was handed a previous archive's three-filament
plate. Three spools were debited for material that was never extruded, and
nothing on the archive said the numbers were someone else's.
A candidate is now rejected when it positively contradicts the print - a
different plate, or a filament count the slicer's ams_mapping disagrees with -
and the accepted one is logged with both expectations. Only on a contradiction:
the plate needs firmware that echoes it and the count needs a print command
Bambuddy saw, and refusing everything uncorroborated would retire the fallback
recovery this same issue asked for.
The count is scoped to one plate or not compared at all. Unscoped, the filament
reader collects every <filament> in the file, and that sum against one plate's
count would reject every multi-plate library upload on exactly the firmwares
that cannot tell us the plate.
-----
Give a download the time the file needs, and one printer at a time (issue #2957)
ftp_timeout is handed to every download as both the socket inactivity timeout
and the whole-transfer deadline, which makes its 30s default a cap on how big a
file a printer may serve. The reporter measured one 5.4 MB 3MF at 45s off a worn
P1S SD card and 25s off a new one, and a 15.15 MB 3MF at 105s. None of those
links were broken - they were slow, which is what the inactivity timeout exists
to tell apart.
download_to_file already asks for SIZE. It now reports it, and the total
deadline follows the file at the 25 KB/s floor _upload_deadline has used since
do, so #2572's cap on the executor queue wait is untouched. Capped at 300s for a
reason that is not about FTP: on_print_start holds a pooled DB connection across
its whole 3MF hunt.
Downloads also take turns per printer now. He watched Bambu Studio lose its own
connection while Bambuddy pulled a 12 MB 3MF, and a later log caught two
Bambuddy downloads of the same file overlapping at print start. The gate is
soft - whoever cannot have it within 30s goes anyway, because a print losing its
3MF to queueing is worse than the contention, and a soft gate cannot deadlock.
It is also meaningful for the first time. The 90s cap on a multi-path lookup
returned while its worker kept walking the remaining paths, still on the
printer's socket; that walk is now cancelled and waited out before the printer
is handed on.
-----
Look in the shared 3MF cache again before each cover retry (issue #2957)
The cover endpoint and the print-start archive flow share a cache so whichever
fetches the 3MF first hands it to the other (#972). The cover consulted it once
on the way in, then retried for up to two and a half minutes without looking
again.
In the reporter's log the archive flow published the file 42 seconds into that
sequence and the cover's third attempt still pulled its own 5,250,969-byte copy,
off a printer that was mid-print on the same SD card.
A file picked up that way is left alone rather than re-registered under this
endpoint's own name or deleted on the way out. It is the archive flow's.
|
||
|
maziggy
|
0eafe312c6 |
Repair the bed temperature on archives written before the fix (issue #2989)
The forward fix reads the array the fitted plate points at, but only for
archives made after it. Everything already in the library stays blank, and
preheat keeps falling back to the keep-warm bed temperature whenever one of
those jobs is reprinted from the queue - 0 of 455 real 3MFs had resolved.
A one-shot pass re-reads the 3MF already on disk, gated by a settings flag the
way #2614's repair is: the rows it cannot fill are exactly the ones it would
reopen every boot. It fills NULLs only. Nothing recorded is overwritten, an
archive whose file is gone stays NULL, and a corrupted 3MF is skipped rather
than failing startup.
The plate mapping moves to threemf_tools.bed_temperature_from_config so the
ingest path and the repair cannot read a 3MF differently - the same drift
move.
_extract_settings_from_content is deleted. Nothing called it anywhere in the
repo, and it carried the old bed_temperature mapping this issue fixed.
|
||
|
maziggy
|
20627b2188 |
Log ffmpeg's error instead of its build banner
ffmpeg opens every run with ~20 lines of version and build banner and prints
its diagnosis last, so the stderr[:200] eight of the nine call sites used kept
the banner and threw the error away. The reporter's twelve capture failures all
read "ffmpeg version 7.1.4 ... configuration: --prefix=/usr --extra-version=",
identical on every install; the exit code was the only usable byte.
The banner-stripping summariser written for #925 lived private to the camera
route. It now lives in backend/app/utils/ffmpeg_output.py and every ffmpeg and
ffprobe stderr goes through it. Two things the scattered copies also got wrong:
four logged the input URL unmasked, publishing a printer access code or camera
password, and four called a bare .decode() on bytes ffmpeg copies stream
fragments into.
-----
Delete the files a no-3MF archive owns, without taking a printer folder
Both delete paths derived the directory from file_path, which such an archive
does not have, so they removed nothing and logged it at ERROR under a SECURITY
banner. That was true when the archive was an empty row and stopped being true
once one could hold a timelapse and finish photos in <archive_dir>/<id>/ and an
uploaded source in archive/no_source/<id>/.
The two are cleaned up by different means, because <archive_dir>/<id> shares a
namespace with the per-printer folders: a normal archive lives at
<archive_dir>/<printer_id>/<timestamp>_<name>/, so archive/1 is printer 1's
folder and also the directory the shared helper hands archive id 1. Ids come
from unrelated sequences, so the first few archives collide with the printers
on every install, and an rmtree there takes every print that printer made --
measured on a scratch tree. no_source/<id> is a level deeper under a name no
printer id can take and is removed whole; the id-named directory gives up only
its photos subdirectory and the video the row records, then goes only if that
left it empty. The depth guard moves from one to two for the same reason: a
file_path that lost a path component could point the delete at a printer
folder, and no archive directory has been one level deep since the first
commit.
Hard delete had its own copy of these rules, which the helper's docstring says
it exists to prevent, and it had diverged -- it skipped the print-log thumbnail
cleanup whenever a guard tripped.
-----
Stop the RTSPS proxy leaving a handler behind at shutdown
asyncio.start_server keeps only a weak reference to the connection callback's
task, so a handler still awaiting its forwarders could be collected while
pending -- "Task was destroyed but it is pending!", at ERROR with a traceback
into camera.py, once every few hundred snapshots. Teardown had the matching
gap: server.close() leaves established connections running, so the close waited
on a handler that only finishes when the peer drops, and ffmpeg has already
been reaped by then.
Handlers are held for as long as they run and cancelled at shutdown, which is
Server.close_clients() by hand -- that landed in 3.13 and Bambuddy supports
3.10. Both the snapshot path and the streaming endpoint share the shutdown.
|
||
|
maziggy
|
ff9b956156 |
Read the bed temperature from the plate the project is sliced for (issue #2989)
BambuStudio writes no bed_temperature key. It stores a per-filament array per
plate type and names the fitted plate in curr_bed_type; bed_temperature is the
Orca/Prusa spelling, so the lookup matched nothing and every archive from a
Bambu slice stored NULL - 0 of 455 real 3MFs resolved. Preheat then fell back
to the keep-warm bed temperature on jobs that had one all along.
Plate names and the plate-to-key mapping are BambuStudio's own get_bed_temp_key
and get_bed_temp_1st_layer_key. First-layer value preferred, highest entry in
the per-filament array taken, an all-zero array left unrecorded.
|
||
|
maziggy
|
ffc55b6a6e |
Skip the manual K calibration line as an internal printer job (issue #2957 follow-up)
Manual flow dynamics has two shapes and each reports under its own name with
no auto_ prefix. pa_pattern_calib_mode was already filtered; pa_line_calib_mode
was not, so it still swept FTP for a 3MF that cannot exist and wrote a no-3MF
archive named after the calibration.
|
||
|
maziggy
|
597b2b44f1 | Updated BACKERS | ||
|
maziggy
|
2e405afcd1 |
Decide whether a 3MF is sliced by looking inside it (issue #2993)
An archive that showed the green GCODE badge could re-import into the File Manager as a source-only project with no Print button, seemingly at random. Nothing was ever lost from the file. The download serves the stored bytes verbatim and the G-code was still in the zip; the two sides simply asked different questions. Archives looked inside the file. The library looked at the filename. So a sliced 3MF stored as Foo.3mf rather than Foo.gcode.3mf earned the badge and lost the Print button, and which one you got depended on how the print had reached the printer -- a slicer's LAN send names it .gcode.3mf, a per-plate export or a cloud-dispatched print does not. Both sides now ask one shared predicate about the zip itself, and every route into the library classifies on content. Only the central directory is read, and only when the name has not already settled it, so ingest costs nothing extra -- the external scan opens each 3MF for its thumbnail regardless. Rows already stored are re-checked once, internal ones only: an external row points at a mount that may be slow or absent, and startup is the worst place to discover that. The Slice action moves with it. Its refusal to slice an output was as name-bound as the Print gate, and without that a file that correctly gained a Print button would have offered to re-slice its own G-code. |
||
|
maziggy
|
7363d5fd33 |
Show the spool that is in the AMS slot, not the one that was
Pull a Bambu ABS Orange out of A1, put a PLA Matte Dark Blue in, and the slot card still read "Bambu ABS" against the new colour until the page was reloaded. Three things stood between the swap and a correct card. The RFID auto-assign rewrites the slot's slot_preset_mappings row and then broadcast an event that refreshed everything except the query that reads it. Only the manual assign path invalidated that one. Those queries then sat behind the 3s cascade debounce, which exists for print completion, where one event fans out across half the app. A swap touches one slot and the user is standing at the printer looking at the card; worse, the timer restarts on every further event, so a busy moment could defer it indefinitely. Slot changes now invalidate immediately. And the card trusted the stored preset over live telemetry outright. That priority is why a hand-picked preset name stays on a slot, but it also let a cached row outrank what the printer was reporting. The row is now skipped when it names a different official Bambu filament than the tray does, so the card is right from the status push alone. User and local presets carry ids that genuinely cannot be compared and are left exactly as they were. Spoolman mode was the worse half of the same bug: its AMS sync writes the same row but announced nothing at all, so there was no event to refresh on. It now reports each slot it changed or cleared. |
||
|
maziggy
|
a70047c75d |
Let sub-project groups be collapsed on the Projects page (issue #2991)
A project with sub-projects drew every one of them expanded, at every level, with nothing to shut. Over a three-level hierarchy and a couple of hundred archives that makes the page one long scroll. Each group's caption is now a chevron that folds that group, and a Collapse pill next to the status filter tabs sets the default for the page and is remembered across reloads. A shut group takes one grid cell rather than a full-width row, so folding a deep tree actually gets the page back. The count on the caption is of the cards nested there, not the parent card's badge: the API counts sub-projects across every status on purpose, so under the Active filter the badge can legitimately say 2 where one card unfolds. A count that disagrees with what unfolds is worse than no count at all. |
||
|
maziggy
|
7c10412f99 |
Refuse a same-named 3MF that contradicts the running print (issue #2957)
When a print's own 3MF cannot be fetched the usage tracker borrows one from the library or a previous archive, matching on the filename stem. That is far weaker evidence than it looks: Bambu Studio writes the printer-side filename from the project's Title metadata, so every plate of a project reaches the printer under one name however the file was renamed on disk. The reporter's single-filament job was handed a previous archive's three-filament plate. Three spools were debited for material that was never extruded, and nothing on the archive said the numbers were someone else's. A candidate is now rejected when it positively contradicts the print - a different plate, or a filament count the slicer's ams_mapping disagrees with - and the accepted one is logged with both expectations. Only on a contradiction: the plate needs firmware that echoes it and the count needs a print command Bambuddy saw, and refusing everything uncorroborated would retire the fallback recovery this same issue asked for. The count is scoped to one plate or not compared at all. Unscoped, the filament reader collects every <filament> in the file, and that sum against one plate's count would reject every multi-plate library upload on exactly the firmwares that cannot tell us the plate. ----- Give a download the time the file needs, and one printer at a time (issue #2957) ftp_timeout is handed to every download as both the socket inactivity timeout and the whole-transfer deadline, which makes its 30s default a cap on how big a file a printer may serve. The reporter measured one 5.4 MB 3MF at 45s off a worn P1S SD card and 25s off a new one, and a 15.15 MB 3MF at 105s. None of those links were broken - they were slow, which is what the inactivity timeout exists to tell apart. download_to_file already asks for SIZE. It now reports it, and the total deadline follows the file at the 25 KB/s floor _upload_deadline has used since do, so #2572's cap on the executor queue wait is untouched. Capped at 300s for a reason that is not about FTP: on_print_start holds a pooled DB connection across its whole 3MF hunt. Downloads also take turns per printer now. He watched Bambu Studio lose its own connection while Bambuddy pulled a 12 MB 3MF, and a later log caught two Bambuddy downloads of the same file overlapping at print start. The gate is soft - whoever cannot have it within 30s goes anyway, because a print losing its 3MF to queueing is worse than the contention, and a soft gate cannot deadlock. It is also meaningful for the first time. The 90s cap on a multi-path lookup returned while its worker kept walking the remaining paths, still on the printer's socket; that walk is now cancelled and waited out before the printer is handed on. ----- Look in the shared 3MF cache again before each cover retry (issue #2957) The cover endpoint and the print-start archive flow share a cache so whichever fetches the 3MF first hands it to the other (#972). The cover consulted it once on the way in, then retried for up to two and a half minutes without looking again. In the reporter's log the archive flow published the file 42 seconds into that sequence and the cover's third attempt still pulled its own 5,250,969-byte copy, off a printer that was mid-print on the same SD card. A file picked up that way is left alone rather than re-registered under this endpoint's own name or deleted on the way out. It is the archive flow's. |
||
|
maziggy
|
b0ecb8fd88 |
Repair the bed temperature on archives written before the fix (issue #2989)
The forward fix reads the array the fitted plate points at, but only for archives made after it. Everything already in the library stays blank, and preheat keeps falling back to the keep-warm bed temperature whenever one of those jobs is reprinted from the queue - 0 of 455 real 3MFs had resolved. A one-shot pass re-reads the 3MF already on disk, gated by a settings flag the way #2614's repair is: the rows it cannot fill are exactly the ones it would reopen every boot. It fills NULLs only. Nothing recorded is overwritten, an archive whose file is gone stays NULL, and a corrupted 3MF is skipped rather than failing startup. The plate mapping moves to threemf_tools.bed_temperature_from_config so the ingest path and the repair cannot read a 3MF differently - the same drift move. _extract_settings_from_content is deleted. Nothing called it anywhere in the repo, and it carried the old bed_temperature mapping this issue fixed. |
||
|
maziggy
|
d4477e9b71 |
Log ffmpeg's error instead of its build banner
ffmpeg opens every run with ~20 lines of version and build banner and prints its diagnosis last, so the stderr[:200] eight of the nine call sites used kept the banner and threw the error away. The reporter's twelve capture failures all read "ffmpeg version 7.1.4 ... configuration: --prefix=/usr --extra-version=", identical on every install; the exit code was the only usable byte. The banner-stripping summariser written for #925 lived private to the camera route. It now lives in backend/app/utils/ffmpeg_output.py and every ffmpeg and ffprobe stderr goes through it. Two things the scattered copies also got wrong: four logged the input URL unmasked, publishing a printer access code or camera password, and four called a bare .decode() on bytes ffmpeg copies stream fragments into. ----- Delete the files a no-3MF archive owns, without taking a printer folder Both delete paths derived the directory from file_path, which such an archive does not have, so they removed nothing and logged it at ERROR under a SECURITY banner. That was true when the archive was an empty row and stopped being true once one could hold a timelapse and finish photos in <archive_dir>/<id>/ and an uploaded source in archive/no_source/<id>/. The two are cleaned up by different means, because <archive_dir>/<id> shares a namespace with the per-printer folders: a normal archive lives at <archive_dir>/<printer_id>/<timestamp>_<name>/, so archive/1 is printer 1's folder and also the directory the shared helper hands archive id 1. Ids come from unrelated sequences, so the first few archives collide with the printers on every install, and an rmtree there takes every print that printer made -- measured on a scratch tree. no_source/<id> is a level deeper under a name no printer id can take and is removed whole; the id-named directory gives up only its photos subdirectory and the video the row records, then goes only if that left it empty. The depth guard moves from one to two for the same reason: a file_path that lost a path component could point the delete at a printer folder, and no archive directory has been one level deep since the first commit. Hard delete had its own copy of these rules, which the helper's docstring says it exists to prevent, and it had diverged -- it skipped the print-log thumbnail cleanup whenever a guard tripped. ----- Stop the RTSPS proxy leaving a handler behind at shutdown asyncio.start_server keeps only a weak reference to the connection callback's task, so a handler still awaiting its forwarders could be collected while pending -- "Task was destroyed but it is pending!", at ERROR with a traceback into camera.py, once every few hundred snapshots. Teardown had the matching gap: server.close() leaves established connections running, so the close waited on a handler that only finishes when the peer drops, and ffmpeg has already been reaped by then. Handlers are held for as long as they run and cancelled at shutdown, which is Server.close_clients() by hand -- that landed in 3.13 and Bambuddy supports 3.10. Both the snapshot path and the streaming endpoint share the shutdown. |
||
|
maziggy
|
c001f596bf |
Read the bed temperature from the plate the project is sliced for (issue #2989)
BambuStudio writes no bed_temperature key. It stores a per-filament array per plate type and names the fitted plate in curr_bed_type; bed_temperature is the Orca/Prusa spelling, so the lookup matched nothing and every archive from a Bambu slice stored NULL - 0 of 455 real 3MFs resolved. Preheat then fell back to the keep-warm bed temperature on jobs that had one all along. Plate names and the plate-to-key mapping are BambuStudio's own get_bed_temp_key and get_bed_temp_1st_layer_key. First-layer value preferred, highest entry in the per-filament array taken, an all-zero array left unrecorded. |
||
|
maziggy
|
164382b38b |
Skip the manual K calibration line as an internal printer job (issue #2957 follow-up)
Manual flow dynamics has two shapes and each reports under its own name with no auto_ prefix. pa_pattern_calib_mode was already filtered; pa_line_calib_mode was not, so it still swept FTP for a 3MF that cannot exist and wrote a no-3MF archive named after the calibration. |
||
|
maziggy
|
27ecdeb7b9 | Updated BACKERS | ||
|
maziggy
|
880c7bfe79 | Updated BACKERS | ||
|
maziggy
|
f1096c13eb | Updated CHANGELOG | ||
|
MartinNYHC
|
029c3ac4b7 | Updated CHANGELOG | ||
|
MartinNYHC
|
8cce10b60a |
Skip the manual K calibration the way the automatic one is skipped
Bambuddy already recognises the printer's automatic pressure-advance run,
auto_pa_line_calib_mode, and leaves no archive and sends no notification
for it. Started by hand rather than automatically before a print, the
same calibration reports under a different name: it prints a pattern
where the automatic one prints a line, and carries no auto_ prefix, so
pa_pattern_calib_mode matched nothing.
It arrives exactly the way the automatic one does -- a bare subtask name
with no /usr/ path -- so it hit the same outcome the module was written
to prevent: an FTP sweep for a 3MF that cannot exist, six candidate names
across five directories with retries, and then a no-3MF archive named
after the calibration, on a printer in the middle of calibrating.
One entry on INTERNAL_JOB_NAMES covers it. That set is the single place
both the print-start and print-complete callbacks consult, so archiving,
the 3MF sweep and the notifications are all handled by the one line.
Matching stays exact after normalising path, suffix and case. The
negative cases are extended alongside the positive ones, so a file
somebody deliberately named pa_pattern_calib_mode_v2.3mf is still
archived as the print it is.
The manual PA *line* method, if it reports its own name, is not covered
here -- the list is deliberately limited to names that have actually been
observed rather than ones that seem likely.
|
||
|
MartinNYHC
|
9b83e8eba4 |
Send AMS tray colours as uppercase hex (issue #2987)
Assigning a spool to an AMS slot unassigned it again seconds later, and
the slot's colour changed at the same time. It presented as Bambu Studio
and Bambuddy fighting over the slot. The reporter's log shows Bambuddy
losing to itself.
P1S firmware 01.10.00.00 reads every lowercase hex letter in an AMS
tray_color as a zero, and hides it completely: the command response
echoes back the value that was sent and reports result "success", so
only the next AMS push says what was really stored. The spool-assign
path sent spool.rgba verbatim and that column stores lowercase. From the
bundle:
sent 09ff00ff -> AMS reports 09000000
sent ff5100ff -> AMS reports 00510000
sent 090000FF -> AMS reports 090000FF
That is the visible colour change, and it is also what deleted the
assignment. The auto-unlink sweep asks whether the slot still matches
the spool assigned to it; the mangled colour no longer did, so the
assignment Bambuddy had made four seconds earlier was removed.
colors_similar('09000000', '09FF00FF') is False, which is the whole of
it.
Re-assigning could not recover, because the Configure Slot dialog seeds
its colour from whatever the printer currently reports. It wrote the
mangled colour back and cemented it, which is the loop the report
describes in its steps 4 and 5.
Colours are now uppercased where the command is assembled rather than in
each of the four routes that configure a slot. A caller that forgets is
exactly how this arrived. Nothing else changes: no padding, no invented
alpha, no six-to-eight widening, and tray_type and tray_sub_brands keep
their case, where it carries meaning -- "PLA Matte" is a product line,
"PLA MATTE" is not.
Two paths deliberately left alone. The developer-mode probe re-sends the
colour the printer itself just reported so that the probe is inert;
uppercasing there would turn it into a write. And the Virtual Printer
forwards the slicer's own command verbatim -- Studio could in principle
hit the same firmware bug, but nothing here evidences that it sends
lowercase, and rewriting a slicer payload inside a transparent proxy is
not a change to make on a hunch.
Two more defects from the same log.
A spool with a brand and no subtype was configured with the string
"None" in its name: the branded branch interpolated spool.subtype
without checking it while the unbranded branch guarded it, so
"Sunlu PLA Matte None" went on the wire and into Studio's display.
And the FTP log is readable again. A 426 whose bytes Bambuddy has
already verified against the printer is how Bambu FTPS normally ends a
transfer, not a fault, so it drops from WARNING to INFO. It fired 54
times in this one bundle, every one followed by a completed upload, and
it was burying the 26 TLS handshake failures in the same log that
actually cost the reporter two prints. A 426 whose bytes do not verify
is still an error and still fails the upload.
The handshake failures themselves are printer-side FTPS cool-off under
load and are not touched here.
|
||
|
MartinNYHC
|
450f9a6f20 |
Derive the chamber target from the trays the print loads (issue #2886)
Preheat took the maximum chamber target across every loaded AMS tray,
with no reference to the job. The reporter's P2S holds PETG Pro, PLA,
ASA and PETG; the ASA row of the filament map says 45C, so a PLA-only
plate was dispatched with chamber_target=45C, the bed driven to 90C to
reach it, and the full 900s max-wait plus 300s soak burned before the
upload started. Every time -- a P2S has no chamber heater and its
chamber tops out around 33C, so the wait can only ever end on the
timeout. Their log carries fifteen of these.
The intent was never in doubt. The resolution order documented one
screen above _derive_chamber_target reads "PLA-only print derives 0 ->
chamber phase auto-skips", but it was implemented as PLA-only AMS
rather than PLA-only print, and only misfires on a mixed load.
The derivation now reads the trays the item's ams_mapping names -- the
same array the print command puts on the wire, [-1, -1, -1, 1] in their
case, addressing exactly the PLA slot -- so the ASA two slots over
contributes nothing and the stage skips outright. Multi-material prints
are unaffected: the maximum is still taken, across the trays the plate
actually loads, so an ASA the print does use is still binding.
An item whose mapping is missing or still unresolved keeps the
whole-unit scan. That is the only signal left, and narrowing to nothing
would disable preheat for prints that need it -- the failure mode worth
avoiding here is the silent one.
The bed hold between jobs is gated on the same derivation and was
holding beds at 90C for the same wrong reason. It now reads the next
item's mapping too, where that item has one.
The external spool is no longer invisible to this. The scan only ever
looked at raw_data['ams'], so an ASA print fed from the external feed
derived 0 and got no preheat at all; a mapping naming 254/255 is now
honoured. An item with no mapping still derives from the AMS alone, so
nothing starts preheating that did not before.
Tray addressing matches _build_loaded_filaments, which is what produced
the ids in the mapping being read back: ams_id * 4 + tray_id, the bare
unit id for an AMS-HT from 128, and the firmware's own vt_tray id for
an external feed. Ids are coerced because this firmware reports them as
strings.
|
||
|
MartinNYHC
|
21fd476668 |
Ask Spoolman which extra fields it has, once (issue #2983)
Bambuddy checked whether one of its four custom spool fields existed with
GET /field/spool/{name}. Spoolman has never served that. Its API declares
only POST and DELETE at that path -- confirmed against the live server's
own OpenAPI document -- so the probe answered 405 Method Not Allowed
every time and the check could not succeed on any version.
Every call therefore fell through to POST /field/spool/{name}, and that
endpoint is an upsert rather than a create. It answers 200 whether or not
the field is already there, so a field the user had renamed, retyped or
given a default to in Spoolman's own UI was reset to Bambuddy's version
of it, and an untrue "Created Spoolman extra field" was logged beside it.
The reporter's log carried 60 of those lines over three days -- once per
field per client init, which is every restart and every settings save.
Existence now comes from GET /field/spool, the listing endpoint, matched
on each row's `key`. Matching on `key` rather than the display `name` is
the part that fixes the overwrite: a renamed field is the same field, and
reading it as a missing one is what re-created it. A field that already
exists is now left completely alone.
The listing is read once per client and banked, so registering all four
fields costs one request instead of four, and a client that has already
looked makes none at all. Only a successful read is banked -- a client
that could not reach the listing asks again for the next field it has not
seen, so one transient failure does not leave it posting blind, and
overwriting, for the rest of its life.
An unreadable listing still falls back to attempting the POST. Registration
is best-effort by contract: it must not turn a write that might still
succeed into one that never happens, so an unexpected Spoolman build is no
worse off than before.
Measured against Spoolman 0.23.1: a field renamed to "Bambu RFID Tag"
survives a full registration pass that previously reset it, the pass makes
one GET and one POST for the single genuinely-missing field where it used
to make four POSTs, and a second pass on the same client makes no requests
at all.
The fake in test_spoolman_extra_field_registration_2903 modelled the
per-field path as a working probe, which is the assumption this bug was
built on; it now answers 405 as the real server does, and its assertions
follow the listing. 18 new tests cover the rest, 10 of which fail against
the old code.
|
||
|
MartinNYHC
|
112e58e5b9 |
Match slicer presets on what they declare, not what they are named (issue #2982)
The internal slicer picked PETG for a PLA plate and an A1 process for a
P1S. Both come from the sidecar's bundled-profile listing, fixed in the
sidecar repo; this is the consuming half plus the hardening that keeps an
older sidecar degrading rather than breaking.
Standard-tier presets now carry the compatible_printers the sidecar
reports. That list is the only truthful account of which printer a preset
belongs to, because the bundle ships no process preset named after a P1S,
an X1, an X1E or an H2D Pro -- all ten of the P1S's are named "@BBL X1C"
and name the P1S only in that list. Reading the printer out of the preset
NAME therefore made a P1S look like it had no compatible process at all:
all 198 hid behind "Show all" and the auto-pick fell through to an
alphabetically-first 0.06mm Fine @BBL A1 0.2 nozzle the CLI refused. A
P1S now gets 0.20mm Standard @BBL X1C and 73 filaments instead of 4. An
older sidecar reports nothing here, which leaves the name matcher in
place -- degraded as before, not broken.
Material is now a hard partition in the filament pre-pick rather than a
+10 bonus. A preset stating a different material than the plate asks for
is the wrong preset, not a worse one: wrong nozzle temperature, wrong bed
temperature, wrong flow. A preset stating NO material stays eligible --
unknown is not wrong, and 32 shipped profiles genuinely have none. The
same rule reaches the retain path, which held a slot on
printer-compatibility alone and so cemented a wrong-material pick through
every re-pick. A preset the user chose themselves is exempt: printing
PETG on a plate a designer labelled PLA is a legitimate thing to do, and
this rule exists to correct the auto-pick, not to overrule the user.
Two more, both found while tracing this and neither reported:
Among process presets equally valid for the selected printer, the one
nearest a 0.2mm layer height now wins. Within a tier the list is
alphabetical and Bambu's naming puts the finest height first, so every
slice that did not name its own process silently got 0.08mm Extra Fine on
an X1 Carbon and 0.06mm Fine on an A1 mini -- correct presets, nobody's
default. Ties break toward the coarser, faster height; a name with no
readable height is still pickable when it is the only candidate; a
process the 3MF named still wins outright.
H2DP is aliased to H2D Pro, the same shape as the A1M rename in #1649 --
the bundle spells the model one way in preset names and another in the
printer preset, so an H2D Pro classified all 198 processes as another
printer's. Deliberately narrow: H2DP and a plain H2D are different
machines and must not collapse.
A dropdown the printer filter would empty now shows the unfiltered list
instead. That state was reachable for four printer models and told the
user nothing; a visible preset for the wrong printer can be changed, an
empty dropdown cannot.
Verified against live Orca 2.4.2 and BambuStudio 02.08.02.61 sidecars
over the real 1156- and 1792-profile trees: every one of the eight
printer models tested now auto-picks a 0.20mm process for its own
printer, a PLA plate draws a PLA preset and a PETG plate a PETG one.
Each change was confirmed to fail its tests when reverted.
|