Every choice in Settings → Camera → Streaming Overlay was lost on reload
or when leaving the page. They are now kept in local storage, checked
like an imported URL when read back; the token is never stored. A Reset
choices link restores the defaults.
A "Settings saved" toast confirms each change once the edits settle.
A printer kept dark between uses showed a black live view and sent black
notification photos (#1655). Settings → Camera can turn the light on for
all printers or for selected ones, for the live view, notification
photos, the finish photo and the snapshot API that Home Assistant uses,
and turns it off 15 seconds after the last use. It only turns off a
light it turned on, and switching the light by hand hands it back.
Snapshots wait an adjustable delay after the light comes on. Timelapse,
the Obico check and the in-print frame bank don't switch it, since they
would make it flash.
The camera card no longer lists every printer: external cameras are
added from a searchable printer picker and only those printers are
listed, so large farms get a short page.
External cameras (General) and camera tokens plus the Streaming Overlay
builder (API Keys) move to a new Camera tab. Old links to the tokens or
the builder, /camera-tokens included, open it. API Keys is hidden from a
user who may see nothing on it. The settings menu keeps General first and
sorts the other tabs by their label in the interface language.
Also lets the Connected Apps fields shrink so Add app stays inside its
card, and fixes the pt-BR camera button label.
The 3MF pass skipped a tray once it had charged it, so a second slicer
filament mapped to the same tray was never deducted, and a single-filament
print that switched trays and came back lost its last segment. Deduplicate
by slicer slot instead. Trays covered before the pass, and trays only
guessed by position that were already charged, are still skipped; charged
trays are still reported to the remain% fallback.
The page is opened from the Printers page and is not in the sidebar, so
the browser's back button was the only way out. Add a "Back to Printers"
link above the title, translated in all locales.
Track a last-seen time per fault instead of one set per printer, with a
10-minute window. Faults seen before the print resumes, starts or
finishes are forgotten as soon as they are gone, so a fixed runout that
recurs is still reported.
In Spoolman mode, Assign Spool and Add to Inventory on the SpoolBuddy
kiosk took the tag UID from the live reader state, which is cleared when
the spool leaves the reader. Lifting it while a dialog was open made the
link fail, and quick-add left an untagged spool behind. Use the tag on
the card, as local inventory already does.
The daemon took tray_uuid from tag blocks 4-5, which hold the filament
type, so every spool of one type sent the same value and the kiosk never
saved it. Read block 9, which both tags of a spool share and the AMS
reports as tray_uuid. Save it on kiosk quick-add and link in local and
Spoolman mode, and give spools added before the fix their tray_uuid when
their exact tag UID is scanned again. Drop any tray_uuid that is not a v4
UUID, so daemons that are not updated yet keep matching by tag UID.
Block 9 read based on #1200 by @Keybored02.
Co-Authored-By: Keybored02 <Keybored02@users.noreply.github.com>
After an RTSP session dropped, ffmpeg could keep writing the same JPEG
indefinitely with no connection to the printer left (two hours at ~29 fps
on a P2S), and every check that counts frames saw a healthy stream. The
stream now restarts ffmpeg after 20 s without a changed frame, on the
existing reconnect path, while viewers stay attached. If the first frame
after the restart is the same picture again, the camera really shows a
still scene (a dark, idle chamber): it is then only re-checked every
5 minutes until the picture changes.
OrcaSlicer's Sync filaments finds a slot's preset by the slot's filament
ID alone. The Configure dialog looked up an Orca profile's ID in the
browser and quietly sent the generic for the material when that came back
empty, so Orca custom filaments reached the slicer as Generic and the log
showed nothing. configure now resolves the ID on the server from
orca_profile_id, follows inherits to the parent profile or the Bambu
filament it was copied from, logs the outcome and reports a fallback,
which the dialog shows as a warning.
Slot presets also store the filament ID they were written with, so the
slot card and the Configure dialog stop showing a preset once the slot is
changed from OrcaSlicer's Device tab or the printer.
Re-configuring a slot for another filament no longer carries over the old
filament's active K-profile, which switched the slot back to the old
filament.
The File Manager and G-code viewer were sized to 100vh-64px on lg+,
subtracting a top bar that only exists in the compact layout, which
left a 64px empty band under both pages. Use lg:h-screen instead.
The frame an external link opens in can't navigate the Bambuddy
window, so links like Bambuddy Orders' "In Bambuddy" did nothing.
The framed page can now post bambuddy:navigate with a path; it is
accepted only from the frame, from the link's origin, and for a path
inside Bambuddy. The theme message announces canNavigate.
maziggy