The /filaments/ endpoint manages material type definitions (cost, temps,
density) but shares its name with the UI's "Filament" page which shows
the spool inventory (/inventory/spools/). This caused users to expect
the API to return their spool inventory.
Rename to /filament-catalog/ to make the distinction clear. No frontend
behavior change — these API methods are defined but unused in the UI.
On dual-nozzle printers (H2C, H2D Pro) with multiple AMS units, usage
tracking attributed filament consumption to the wrong spools. The MQTT
mapping field — a snow-encoded array mapping slicer slots to physical
AMS trays — was preserved in state but never parsed.
Add _decode_mqtt_mapping() to convert snow encoding (ams_hw_id * 256 +
slot) to bambuddy global tray IDs. Insert as priority 2 in the mapping
resolution chain, after print_cmd ams_mapping but before queue/tray_now
fallbacks. Works for all printer models and print sources.
AMS-HT trays (IDs 128-135) are single-slot units, but the snow_slot
computation used `snow_tray % 4 if snow_tray < 128 else -1`, yielding
-1 for AMS HT. This caused a misleading "slot mismatch" debug log on
every MQTT update despite producing the correct tray_now value. Now
returns slot 0 for AMS-HT IDs (128-135), matching the firmware's
tray_now=0 for these single-slot units.
P2S (and X1C) with multiple AMS units incorrectly entered the H2D
dual-nozzle tray_now disambiguation code path, causing warning log
spam. The check `tray_now <= 3` matched any printer loading from
AMS 0. Now uses a persistent `_is_dual_nozzle` flag detected from
device.extruder.info (>= 2 entries), which only dual-nozzle printers
(H2D, H2D Pro) report. Flag is set early in message processing so
it's available before AMS data is parsed.
After clicking "Clear Plate & Start Next", refreshing the page showed
the button again because the frontend determined the state purely from
the printer's FINISH/FAILED status. The backend already tracked a
plate_cleared flag in memory but never exposed it to the frontend.
- Add plate_cleared field to PrinterStatus schema and API response
- Pass plateCleared prop to PrinterQueueWidget
- Skip clear plate UI when plate is already acknowledged
- Add 2 tests for plateCleared=true behavior
Recent BambuStudio/OrcaSlicer updates require a bind/detect handshake on
port 3000 before connecting via MQTT/FTP. Without this, slicers cannot
discover or connect to the virtual printer in any mode.
- Add BindServer for server modes (immediate/review/print_queue)
- Add TCPProxy for raw TCP forwarding (proxy mode)
- Update Dockerfile (EXPOSE 3000) and docker-compose.yml (bridge port)
- Add 10 new tests for BindServer protocol and integration
Some printer MQTT brokers (e.g. P1S) reject subscriptions to the request
topic by killing the TCP connection, causing a disconnect loop. The request
topic subscription for ams_mapping capture is now fail-safe with two
detection paths:
- SUBACK rejection: on_subscribe callback detects failure code 0x80
- Broker kills connection: on_disconnect detects disconnect within 10s of
unconfirmed subscription attempt
After detection, the request topic is disabled for that printer and
reconnection succeeds with only the report topic. Printers that support
the request topic (e.g. X1E, H2D) get ams_mapping capture; printers that
don't (e.g. P1S) gracefully degrade to tray_now-based tracking.
When the auto-scan attached the wrong timelapse (e.g. from a different
print), there was no way to fix it — the file couldn't be removed and
re-scanning was disabled once a timelapse was attached.
The queue item status update (printing → completed/failed) was placed
after `if not archive_id: return` in on_print_complete. When archive
lookup failed (app restart mid-print, manual deletion), the function
returned early and the queue item stayed stuck in "printing" forever.
Over multiple print cycles, stale items accumulated — showing double
the actual printer count in the "Printing" stat and completed prints
remaining in the "Currently Printing" section.
Move the entire queue item status update block (status transition,
MQTT relay, queue-completed notification, auto-power-off) to before
the archive_id early return, matching the pattern used for SD card
cleanup.
The SD card file cleanup (which prevents phantom prints on power cycle)
was placed after the archive_id early-return in on_print_complete. Users
with auto-archiving disabled never reached the cleanup code, so ghost
prints persisted on every reboot.
- Move cleanup before the archive_id check so it always runs
- Add retry loop (3 attempts, 2s delay) for printers that briefly lock
the filesystem after a print ends
- Try both .3mf and .gcode extensions
Reported by @DIYofThings in #374.
Subscribe to the MQTT request topic (device/{serial}/request) to intercept
print commands from any source (BambuStudio, OrcaSlicer, Bambu Handy, or
Bambuddy itself). Captures ams_mapping from project_file commands and passes
it through print start/complete callbacks. Fixes wrong tray attribution on
H2D Pro when prints are started from external slicers.
Usage tracking works on X1E but fails on H2D Pro — the wrong tray
is identified, attributing usage to the wrong spool. The root cause
is unknown because we don't know what MQTT mapping data each printer
model reports.
Adds INFO-level logging at print start and completion:
- state.raw_data["mapping"] (unknown format, preserved but never parsed)
- tray_now, last_loaded_tray values
- All raw_data keys containing "map" (discovery)
- Per-AMS-tray summary: tray_type, tray_color, tray_now, tray_tar
This enables comparing MQTT behavior across printer models without
requiring DEBUG mode, so testers can send normal logs.
Three fixes for inventory spool usage not updating after prints:
1. Store ams_mapping from print command (reprint, library print, queue)
so the usage tracker maps 3MF slots to the actual physical trays
the user selected, not the default slicer mapping.
2. Track last_loaded_tray on printer state — the last valid tray_now
(0-253) seen during printing. On H2D printers, tray_now is always
255 in AMS data; the real tray resolves via snow field ~44s after
print start but reverts to "unloaded" at completion. The fallback
chain is: tray_now_at_start > current tray_now > last_loaded_tray.
3. Use color similarity (Euclidean RGB distance, threshold 50) instead
of exact hex match for auto-unlink fingerprint checks. RFID sensors
report slightly different shades across reads (e.g. distance ~43.6
for the same spool), causing false assignment unlinks after prints.
The "Next in queue" widget on the printer card only checked
archive_name/archive_id, so file-manager-sourced queue items
displayed "Archive #null". Now falls back to library_file_name
and library_file_id, matching the Queue page display logic.
When a print was queued from the file manager (library_file_id path),
the scheduler never created an archive or called register_expected_print().
This forced on_print_start to re-download the 3MF via FTP, and if that
failed, a fallback archive with no file was created — breaking 3MF-based
filament usage tracking entirely. The queue item's archive_id also stayed
NULL, so the usage tracker couldn't find the AMS slot mapping.
Now the scheduler creates an archive from the library file before uploading,
sets item.archive_id, and the existing register_expected_print() call fires
since archive is no longer None.
Add a "Clear Errors" button to the HMS error modal that sends
clean_print_error via MQTT and locally clears hms_errors for
immediate UI feedback. Useful for dismissing stale print_error
values that persist after print cancellation or transient events.
The small 208px image panel in the skip objects modal made it hard to
distinguish object markers when parts are close together. Clicking the
image now opens a fullscreen lightbox overlay (up to 600px) with the
same markers at a proportionally smaller size, solving the overlap
problem. Close via X button, Escape key, or backdrop click. Escape
cascades correctly — closes lightbox first, then the modal.
- Add progress bar, time remaining, ETA, and layer count to currently printing item
- Remove duplicate formatDuration & formatETA functions, now imported from utils/dates
- Remove formatTime (duplicate of formatDuration)
- Update formatETA to support optional i18n translation
- Update translation: common.tomorrow
When scheduling a multi-plate file from the file manager, the modal
allowed submission without selecting a plate. Now auto-selects the
first plate by default and enforces plate selection for both archive
and library files.
MartinNYHC