The hook is mounted globally in WebSocketProvider, so refetchInterval on its
per-printer status queries added one request per printer every 30s on every
page. The Printers page already runs that fallback on the same query key, and
useWebSocket writes ['printerStatus', id] straight into the cache, so the poll
bought nothing outside the Printers page and cost a request per printer per
tab everywhere else.
Also captures document.title at mount instead of restoring to a hardcoded
'Bambuddy', so the default no longer has to be kept in sync with index.html.
jsdom has no canvas backend, so getContext('2d') logged a "Not implemented"
jsdomError with a full React stack on every run of the hook's tests, and the
favicon branch bailed on the null context and went untested. Stubbing
getContext/toDataURL removes the noise and lets the ring code run, so the
favicon swap and the restore-on-toggle-off path are now asserted.
Telegram groups with Topics enabled always received notifications in the
General topic, since only Bot Token and Chat ID were configurable. Splitting
notifications per printer meant running a separate chat for each one.
The Telegram provider now takes an optional Forum Topic ID - the last number
in a topic's link, t.me/c/1234567890/25 - and routes its messages there. Left
empty, nothing changes.
The value is coerced to an int once in _send_telegram and attached to both the
sendMessage JSON body and the sendPhoto form data. That ordering matters:
Telegram rejects a string message_thread_id in the JSON body while accepting
one in the multipart call, so passing the raw form value through would have
worked for thumbnail notifications and 400'd for plain-text ones. A
non-numeric value is rejected in the form and again server-side before any
request goes out.
No migration - provider config is a JSON blob.
Adds Forum Topic ID plus help text to the Telegram section of the provider
dialog, translated in all 13 locales. Backend tests cover omitted / blank /
int-typed / non-numeric values and both send paths; frontend tests cover the
field being optional, absent for other providers, round-tripping on save, and
blocking save on a bad value.
Optional and off by default, toggled under Settings -> Appearance. When enabled, the browser tab shows the soonest-finishing print's percentage plus a green progress-
ring favicon, updated live over the existing WebSocket. The preference is stored per-browser in localStorage.
Adds the usePrintProgressTitle hook (with tests), a ThemeContext preference, the Settings toggle, i18n strings for all locales, and a README entry.
The uk locale was inserted before ru in i18n/index.ts - in the import block,
the resources map and availableLanguages. Locales are appended to those lists
as they land (tr, then ru on 2026-07-19, then uk on 2026-07-28), and
SettingsPage renders availableLanguages in array order, so the picker showed
Ukrainian above Russian while every other entry followed the order it was
added.
Moves uk to the end of all three lists. SUPPORTED_LNGS is sorted
alphabetically and already had uk in the correct position, so it is unchanged.
Frontend-only, no behaviour change beyond the picker's row order.
Subprocess output and user-supplied URLs are scrubbed of credentials
before they reach the application log. Adds a shared redaction helper in
core/logging_filters and routes the existing support-bundle sanitizer
through the same pattern.
Timelapse was on, the video never reached the archive, and Scan for Timelapse
found nothing afterwards. Across 247 support bundles this was the norm, not an
edge case: 457 automatic scans scheduled, 262 attached.
The scan looked four times over ~65s. The attempt that found the video was #1
272 times, then 17 / 13 / 13 — flat against the cutoff, not decaying, i.e.
files were still arriving when we stopped. What ran afterwards searched for the
print name inside the filename; Bambu only writes "video_<timestamp>", so it
fired 159 times and matched zero.
The manual Scan had no baseline at all and matched on filename timestamp, FTP
mtime, or "there is only one video" — all reading a clock a LAN-only printer
cannot sync. The reporter's P1S was six and a half days out.
- Poll for minutes instead of ~65s; drop the name-match fallback.
- Persist the print-start baseline on the archive, so the diff survives a
restart mid-print and the manual Scan runs the same comparison. With a
baseline present the clock-based strategies are skipped entirely — they can
only turn an honest "pick one" into a confident wrong answer.
- When several files are new (a previous print's video landing late), exclude
the ones already attached to another archive instead of ordering the
candidates. Ordering could only be done on the printer's clock.
- Delete the video from the printer once archived. Keeps /timelapse to
unclaimed files, which is what makes the diff unambiguous, and stops P1S
cards filling with AVIs.
- Gate that delete on a verified transfer: download_file now compares against
the size from the listing. An FTPS connection closing early does not always
raise, so a partial buffer was being attached as a complete video — which
would also have been the one case where deleting the source lost data.
Bounded twice on purpose: wall-clock deadline plus a derived round cap, since
the deadline stops bounding the loop as soon as the sleeps are shortened.
Per-round logging only speaks when the listing changed — 31 rounds of full
listings would bury the interesting line in the support bundle.
Migration adds print_archives.timelapse_baseline as JSON, spelled the same on
both dialects so a migrated database matches a fresh one.
-----------
fix(finish-photo): add the timelapse frame to the archive after the notification (#2704)
When a print records a timelapse, its last frame is the better finish photo:
the firmware stops recording with the toolhead parked and before the end
G-code drops the bed, where a live grab at that moment catches a lowered
plate. Bambuddy waited 60s for the video and then gave up, because the
print-complete notification blocks on that photo and holding a notification
for minutes is worse than sending it with the live grab.
P1-series printers write MJPEG AVI rather than H.264 MP4 and serve it slowly.
Measured over 261 attaches in the support bundles: P1S median 33s, p90 167s,
worst 546s, while every other model finished inside 26s. So the printers that
most needed the better framing were the ones that never got it.
Keep the notification on the same bound, and keep waiting off to the side.
_capture_finish_photo_from_timelapse now reports whether it ran out of time or
concluded — a video that landed and failed extraction is not worth retrying,
one that never arrived is. On the first, schedule a background task that waits
up to 15 minutes and inserts the extracted frame at the front of the archive's
photo list, where the gallery opens.
The live grab stays on disk: the notification already links to that exact
file, so removing it would leave a broken image in Discord or Telegram.
The length check proves we received what the listing said, not that the file
was finished. The first look happens ~5s after the print ends, while the
printer may still be writing, so a growing file can be listed short, served
short, and pass. Re-list after the download and only accept the video once its
size has stopped changing — a failed re-list counts as not settled, since
"could not check" must not mean "safe to delete".
The finish photo needs a "printing done, toolhead parked, filament unload
not started" moment. stg_cur=22 was meant to be it (#1721) and fires on no
model in the field: across 247 support bundles there is not one
FINISH PHOTO MOMENT (stage-22), including the 2026-06-13..07-08 window where
it was the only pre-FINISH trigger in the code — 104 captures on A1, A1 Mini,
H2C, H2D, P1S, P2S, X1C and X2D, all of them the FINISH fallback.
A replacement can't be designed from the bundles we have. Out of that window
Bambuddy parses only stg_cur and mc_print_sub_stage; every other stage/action
field arrives and is dropped unread. The candidates that sound right
(print_real_action, mc_action, mc_stage) are absent from A1/A1 Mini/P1S
payloads, so none of them can be the universal answer alone.
Dump the raw fields for the window between the last object layer and
gcode_state=FINISH at DEBUG. Opens on the first end-of-print signal (last
layer, progress >= 99, or no remaining time) so a dropped layer_num packet
doesn't lose it, logs only what changed frame to frame, closes on the
transition out of RUNNING, and arms once per print.
Instrumentation only: gated on DEBUG being enabled, read-only against printer
state, wrapped so it cannot break ingest, and capped at 400 frames per print.
The probed fields are stage codes, counters and bitfields — nothing
identifying, and no access code.
A printer with a wrong access code gave no explanation anywhere. The connect
callback's failure branch was a bare `state.connected = False`, discarding the
CONNACK reason code the printer had just sent, so the only trace was paho's
follow-up disconnect -- logged every 30 seconds as "rc=Unspecified error",
which is exactly what a powered-off printer produces. In the report behind this
fix one of three printers had been in that loop for the whole capture, and
neither the log nor the support bundle could say why.
Bambu speaks MQTT 3.1.1, whose CONNACK return codes 4 and 5 paho maps onto
reason codes 134 and 135. Both are now logged with the printer's own reason
string and, for those two, the remedy: the access code is regenerated whenever
LAN Only or Developer Mode is toggled, so it has to be re-read from the screen.
The access code itself is never logged -- it would land in every bundle.
The reason is kept on the client as a stable slug and plumbed through
test_connection into the connection diagnostic, which now distinguishes two
cases it previously conflated. "The printer refused our credentials" is
asserted only when the printer said so; when all Bambuddy knows is that there
is no session, the text hedges and names the alternatives (rebooting, or
already at its limit of simultaneous connections). The old wording claimed the
access code was most likely wrong in both cases.
Frontend needed no change -- ConnectionDiagnostic already renders
`<status>_<reason>` variants with fallback to the plain per-status text, so an
unrecognised slug degrades to today's wording rather than a missing key.
The hook is mounted globally in WebSocketProvider, so refetchInterval on its
per-printer status queries added one request per printer every 30s on every
page. The Printers page already runs that fallback on the same query key, and
useWebSocket writes ['printerStatus', id] straight into the cache, so the poll
bought nothing outside the Printers page and cost a request per printer per
tab everywhere else.
Also captures document.title at mount instead of restoring to a hardcoded
'Bambuddy', so the default no longer has to be kept in sync with index.html.
jsdom has no canvas backend, so getContext('2d') logged a "Not implemented"
jsdomError with a full React stack on every run of the hook's tests, and the
favicon branch bailed on the null context and went untested. Stubbing
getContext/toDataURL removes the noise and lets the ring code run, so the
favicon swap and the restore-on-toggle-off path are now asserted.
Telegram groups with Topics enabled always received notifications in the
General topic, since only Bot Token and Chat ID were configurable. Splitting
notifications per printer meant running a separate chat for each one.
The Telegram provider now takes an optional Forum Topic ID - the last number
in a topic's link, t.me/c/1234567890/25 - and routes its messages there. Left
empty, nothing changes.
The value is coerced to an int once in _send_telegram and attached to both the
sendMessage JSON body and the sendPhoto form data. That ordering matters:
Telegram rejects a string message_thread_id in the JSON body while accepting
one in the multipart call, so passing the raw form value through would have
worked for thumbnail notifications and 400'd for plain-text ones. A
non-numeric value is rejected in the form and again server-side before any
request goes out.
No migration - provider config is a JSON blob.
Adds Forum Topic ID plus help text to the Telegram section of the provider
dialog, translated in all 13 locales. Backend tests cover omitted / blank /
int-typed / non-numeric values and both send paths; frontend tests cover the
field being optional, absent for other providers, round-tripping on save, and
blocking save on a bad value.
Optional and off by default, toggled under Settings -> Appearance. When enabled, the browser tab shows the soonest-finishing print's percentage plus a green progress-ring favicon, updated live over the existing WebSocket. The preference is stored per-browser in localStorage.
Adds the usePrintProgressTitle hook (with tests), a ThemeContext preference, the Settings toggle, i18n strings for all locales, and a README entry.
The uk locale was inserted before ru in i18n/index.ts - in the import block,
the resources map and availableLanguages. Locales are appended to those lists
as they land (tr, then ru on 2026-07-19, then uk on 2026-07-28), and
SettingsPage renders availableLanguages in array order, so the picker showed
Ukrainian above Russian while every other entry followed the order it was
added.
Moves uk to the end of all three lists. SUPPORTED_LNGS is sorted
alphabetically and already had uk in the correct position, so it is unchanged.
Frontend-only, no behaviour change beyond the picker's row order.
Subprocess output and user-supplied URLs are scrubbed of credentials
before they reach the application log. Adds a shared redaction helper in
core/logging_filters and routes the existing support-bundle sanitizer
through the same pattern.
Timelapse was on, the video never reached the archive, and Scan for Timelapse
found nothing afterwards. Across 247 support bundles this was the norm, not an
edge case: 457 automatic scans scheduled, 262 attached.
The scan looked four times over ~65s. The attempt that found the video was #1
272 times, then 17 / 13 / 13 — flat against the cutoff, not decaying, i.e.
files were still arriving when we stopped. What ran afterwards searched for the
print name inside the filename; Bambu only writes "video_<timestamp>", so it
fired 159 times and matched zero.
The manual Scan had no baseline at all and matched on filename timestamp, FTP
mtime, or "there is only one video" — all reading a clock a LAN-only printer
cannot sync. The reporter's P1S was six and a half days out.
- Poll for minutes instead of ~65s; drop the name-match fallback.
- Persist the print-start baseline on the archive, so the diff survives a
restart mid-print and the manual Scan runs the same comparison. With a
baseline present the clock-based strategies are skipped entirely — they can
only turn an honest "pick one" into a confident wrong answer.
- When several files are new (a previous print's video landing late), exclude
the ones already attached to another archive instead of ordering the
candidates. Ordering could only be done on the printer's clock.
- Delete the video from the printer once archived. Keeps /timelapse to
unclaimed files, which is what makes the diff unambiguous, and stops P1S
cards filling with AVIs.
- Gate that delete on a verified transfer: download_file now compares against
the size from the listing. An FTPS connection closing early does not always
raise, so a partial buffer was being attached as a complete video — which
would also have been the one case where deleting the source lost data.
Bounded twice on purpose: wall-clock deadline plus a derived round cap, since
the deadline stops bounding the loop as soon as the sleeps are shortened.
Per-round logging only speaks when the listing changed — 31 rounds of full
listings would bury the interesting line in the support bundle.
Migration adds print_archives.timelapse_baseline as JSON, spelled the same on
both dialects so a migrated database matches a fresh one.
-----------
fix(finish-photo): add the timelapse frame to the archive after the notification (#2704)
When a print records a timelapse, its last frame is the better finish photo:
the firmware stops recording with the toolhead parked and before the end
G-code drops the bed, where a live grab at that moment catches a lowered
plate. Bambuddy waited 60s for the video and then gave up, because the
print-complete notification blocks on that photo and holding a notification
for minutes is worse than sending it with the live grab.
P1-series printers write MJPEG AVI rather than H.264 MP4 and serve it slowly.
Measured over 261 attaches in the support bundles: P1S median 33s, p90 167s,
worst 546s, while every other model finished inside 26s. So the printers that
most needed the better framing were the ones that never got it.
Keep the notification on the same bound, and keep waiting off to the side.
_capture_finish_photo_from_timelapse now reports whether it ran out of time or
concluded — a video that landed and failed extraction is not worth retrying,
one that never arrived is. On the first, schedule a background task that waits
up to 15 minutes and inserts the extracted frame at the front of the archive's
photo list, where the gallery opens.
The live grab stays on disk: the notification already links to that exact
file, so removing it would leave a broken image in Discord or Telegram.
The length check proves we received what the listing said, not that the file
was finished. The first look happens ~5s after the print ends, while the
printer may still be writing, so a growing file can be listed short, served
short, and pass. Re-list after the download and only accept the video once its
size has stopped changing — a failed re-list counts as not settled, since
"could not check" must not mean "safe to delete".
The finish photo needs a "printing done, toolhead parked, filament unload
not started" moment. stg_cur=22 was meant to be it (#1721) and fires on no
model in the field: across 247 support bundles there is not one
FINISH PHOTO MOMENT (stage-22), including the 2026-06-13..07-08 window where
it was the only pre-FINISH trigger in the code — 104 captures on A1, A1 Mini,
H2C, H2D, P1S, P2S, X1C and X2D, all of them the FINISH fallback.
A replacement can't be designed from the bundles we have. Out of that window
Bambuddy parses only stg_cur and mc_print_sub_stage; every other stage/action
field arrives and is dropped unread. The candidates that sound right
(print_real_action, mc_action, mc_stage) are absent from A1/A1 Mini/P1S
payloads, so none of them can be the universal answer alone.
Dump the raw fields for the window between the last object layer and
gcode_state=FINISH at DEBUG. Opens on the first end-of-print signal (last
layer, progress >= 99, or no remaining time) so a dropped layer_num packet
doesn't lose it, logs only what changed frame to frame, closes on the
transition out of RUNNING, and arms once per print.
Instrumentation only: gated on DEBUG being enabled, read-only against printer
state, wrapped so it cannot break ingest, and capped at 400 frames per print.
The probed fields are stage codes, counters and bitfields — nothing
identifying, and no access code.
A printer with a wrong access code gave no explanation anywhere. The connect
callback's failure branch was a bare `state.connected = False`, discarding the
CONNACK reason code the printer had just sent, so the only trace was paho's
follow-up disconnect -- logged every 30 seconds as "rc=Unspecified error",
which is exactly what a powered-off printer produces. In the report behind this
fix one of three printers had been in that loop for the whole capture, and
neither the log nor the support bundle could say why.
Bambu speaks MQTT 3.1.1, whose CONNACK return codes 4 and 5 paho maps onto
reason codes 134 and 135. Both are now logged with the printer's own reason
string and, for those two, the remedy: the access code is regenerated whenever
LAN Only or Developer Mode is toggled, so it has to be re-read from the screen.
The access code itself is never logged -- it would land in every bundle.
The reason is kept on the client as a stable slug and plumbed through
test_connection into the connection diagnostic, which now distinguishes two
cases it previously conflated. "The printer refused our credentials" is
asserted only when the printer said so; when all Bambuddy knows is that there
is no session, the text hedges and names the alternatives (rebooting, or
already at its limit of simultaneous connections). The old wording claimed the
access code was most likely wrong in both cases.
Frontend needed no change -- ConnectionDiagnostic already renders
`<status>_<reason>` variants with fallback to the plain per-status text, so an
unrecognised slug degrades to today's wording rather than a missing key.
Every slot of the A2L's AMS Lite rendered as "?" in Bambu Studio through the
Virtual Printer while Bambuddy's own AMS card was correct, and a filament set
by hand in Studio reverted about a second later.
The A2L reports its AMS Lite as physical unit id 16 but packs the slot presence
bits at base 24, so bambu_mqtt normalises the id to 6 at the ingest boundary and
every internal reader gets the right bits. The VP bridge is not downstream of
that: BambuMQTTClient._on_message fans raw payload bytes out to raw-message
handlers before parsing, so mqtt_bridge._on_printer_raw does its own json.loads
and still holds id 16. It then called the shared apply_tray_exist_bits, which
computed 16*4 = bits 64-67 -- never set -- concluded all four slots were empty,
and wiped tray_type / tray_color / tray_info_idx / tag_uid / tray_uuid / remain
from the copy sent to the slicer. That runs on every push, which is why a manual
pick could not survive the next 1 Hz cached-as-base report.
apply_tray_exist_bits now folds the unit id through normalize_am_unit_id, so 16
and 6 land on the same bit base whichever id the caller holds. The bridge's
cached ids stay physical on purpose -- Studio addresses the Lite as 16, sending
ams_get_rfid {ams_id: 16} through the VP -- so normalising the cache instead
would have broken the slicer's own command path.
Confirmed from the reporter's debug log, which shows the cleanup clearing slots
at bits 64-67 under the VP's log label. Before #2670 added the
0 <= ams_id <= 15 range guard this wiped the slots; after it, unit 16 fell out
of the guard and the A2L got no empty-slot cleanup at all -- two different wrong
answers, both fixed here.
Every slot of the A2L's AMS Lite rendered as "?" in Bambu Studio through the
Virtual Printer while Bambuddy's own AMS card was correct, and a filament set
by hand in Studio reverted about a second later.
The A2L reports its AMS Lite as physical unit id 16 but packs the slot presence
bits at base 24, so bambu_mqtt normalises the id to 6 at the ingest boundary and
every internal reader gets the right bits. The VP bridge is not downstream of
that: BambuMQTTClient._on_message fans raw payload bytes out to raw-message
handlers before parsing, so mqtt_bridge._on_printer_raw does its own json.loads
and still holds id 16. It then called the shared apply_tray_exist_bits, which
computed 16*4 = bits 64-67 -- never set -- concluded all four slots were empty,
and wiped tray_type / tray_color / tray_info_idx / tag_uid / tray_uuid / remain
from the copy sent to the slicer. That runs on every push, which is why a manual
pick could not survive the next 1 Hz cached-as-base report.
apply_tray_exist_bits now folds the unit id through normalize_am_unit_id, so 16
and 6 land on the same bit base whichever id the caller holds. The bridge's
cached ids stay physical on purpose -- Studio addresses the Lite as 16, sending
ams_get_rfid {ams_id: 16} through the VP -- so normalising the cache instead
would have broken the slicer's own command path.
Confirmed from the reporter's debug log, which shows the cleanup clearing slots
at bits 64-67 under the VP's log label. Before #2670 added the
0 <= ams_id <= 15 range guard this wiped the slots; after it, unit 16 fell out
of the guard and the A2L got no empty-slot cleanup at all -- two different wrong
answers, both fixed here.
Review feedback on #2691: `state` is bit-packed like its sibling `range`
(end << 16 | start), and Bambu Studio decodes it with
get_flag_bits(state, 0, 8). Masking with & 0xFF before clamping means a
packed value decodes to the real percentage instead of clamping to 100.
Also moves the uses_exhaust_fan_label import to the top of printers.py with
the other imports.
Tests: packed value (60 << 16 | 45) decodes to 45, and plain 0-100 values
round-trip unchanged.
Place the left auxiliary fan badge before the right-hand auxiliary badge so
the row reads part cooling -> left aux -> aux -> chamber/exhaust, matching
the printer's physical left-to-right arrangement.
Adds a test asserting the rendered badge order.
The fan-speed endpoint always reported 'Chamber fan set to N%', so on
P2S/X2D — where the printer card labels that fan 'Exhaust' — clicking
Exhaust produced a toast saying Chamber fan.
Adds uses_exhaust_fan_label() to printer_models so the badge label and the
API response share one source of truth, and uses it to pick 'Exhaust fan'
vs 'Chamber fan' in the response message.
Tests: helper coverage for P2S/X2D (incl. internal codes N7/N6), other
enclosed models, and unknown/missing model; API test asserting the message
matches the badge label per model.
The P2S/X2D have two fans bambuddy didn't fully handle. On the P2S both are
add-on kits; on the X2D they ship from the factory.
1. Left auxiliary part cooling fan — not shown or controllable. It is reported
ONLY as device.airduct part id 10 (raw id 160 >> 4; FAN_REMOTE_COOLING_1 in
Bambu Studio's DevFan::ParseV3_0) and is never mirrored into a flat
big_fanX_speed field, which is why it was invisible. This is the gap
identified in #2576, where the single 'Auxiliary' fan (big_fan1 / M106 P2)
only reaches the right-hand aux fan.
2. Chamber exhaust fan — shown on every P2S labelled 'Chamber Fan'. On P2S/X2D
Bambu's firmware/UI (and Bambu Studio's FAN_CHAMBER_0_IDX) call it 'Exhaust',
and it is a kit on the P2S rather than built in.
Both are now detected from device.airduct.parts, which lists only the fans that
physically exist, so each tile appears only when the hardware is present.
- bambu_mqtt: parse airduct part 10 -> left_aux_fan_speed (None when absent) and
part 3 presence -> exhaust_fan_present; set_fan_speed() accepts index 10 plus a
set_left_aux_fan() helper
- schema / status route / printer_manager broadcast / mqtt_relay expose both fields
- POST /printers/{id}/fan-speed accepts fan=aux2 -> M106 P10, the command Bambu's
official P2S machine profiles use
- frontend: 'Left Auxiliary Fan' tile shown when reported; big_fan2 tile labelled
'Exhaust' and presence-gated on P2S/X2D, unchanged 'Chamber Fan' elsewhere
- i18n: leftAuxiliary + exhaust for all 12 locales
Verified fan -> field map on a live P2S (fw 01.02.00.00), stable across cooling
and heating airduct modes:
Part cooling -> cooling_fan_speed / airduct id 1 (built in)
Aux -> big_fan1_speed / airduct id 2 (built in)
Exhaust -> big_fan2_speed / airduct id 3 (kit)
Left aux -> airduct id 10 only (kit; forced off in heating by mode config)
Tests: airduct id-10 parsing (raw 160 -> id 10, not literal 160), id-3 presence,
base-P2S absence, diff-push survival, clamping, malformed entries, M106 P10
emission, invalid-index rejection; fan-speed API aux2->10 mapping; frontend tile
presence and labelling per model/kit.
The Ukrainian locale was authored before #2622 landed and merged dev in
without picking up the five slice.designSettings* keys that came with it, so
check:i18n failed at 5675 leaves against en's 5680. This is invisible on the
PR because ci.yml only triggers for pull requests targeting main, and this one
targets dev - the only checks that ran were the security workflow's.
Adds the five missing keys, following the file's own convention of rendering
"designer" as "автора" as it already does in slice.useEmbeddedHint.
Two values were still English and the parity gate could not see them, because
check 4 only fires on leaves byte-identical to en: profiles.localProfiles.
pressureAdvance and inventory.paProfileTab both read "Pressure Advance (PA)"
where en has "Pressure Advance" and "PA Profile". The added "(PA)" was enough
to walk past the equality test. Both are now translated, the second as a tab
label matching the Russian. Inline mentions of the term in profiles.subtitle
and kProfilesDescription stay in English, which is what ru does too.
failureDetection.mlUrl is translated rather than allow-listed, and the dead
'{{weight}} г' entry is dropped from UK_COGNATES - that list matches against
the English value, so an entry spelled in Ukrainian could never fire, and
since the unit is now localized no entry is needed at all.
Four straight apostrophes normalized to the typographic form used by the
other 186 in the file. Locale count in the README and the two wiki pages
corrected from 11 to 13; it had already been wrong, omitting Russian.
Signing in to Bambu Cloud with an authenticator-app account failed every
time with "Invalid code", whatever the code was. Bambu Lab added double-
submit CSRF protection to the bambulab.com web origin - which is where,
and only where, this service posts the two-factor code. The endpoint
refused the request with 403 "CSRF error: missing_cookie" before it ever
evaluated the code, and Bambuddy reported that refusal as a bad code.
Verified against the live endpoint with a deliberately invalid key: a
bare POST returns missing_cookie; GET /api/csrf mints a bbl_csrf_token
cookie; a POST carrying only the cookie returns missing_header; a POST
carrying the cookie plus an x-bbl-csrf-token header reaches application
logic. Landing on the sign-in page first - the intuitive fix - does not
help, as that page sets only Cloudflare's __cf_bm. Of five header
spellings tried, only x-bbl-csrf-token is accepted, so the tests pin it.
verify_totp now performs that handshake against the same origin it will
post to (bambulab.cn for the China region - a token minted by the global
site is a cookie the .cn endpoint never issued), and declines to submit
the code at all when no token can be obtained rather than burning the
user's 30-second TOTP window on a request that is certain to be refused.
A CSRF refusal now also says the code was never checked instead of
masquerading as a wrong code, which is what sent the reporter chasing
clock drift and leading-zero parsing.
Only TOTP sign-ins were affected. Every other cloud call, the email-code
two-factor path included, goes to api.bambulab.com, which is not gated,
and existing stored tokens were unaffected throughout.
The region-routing test's MockTransport needed teaching about the
handshake: it returns one canned response for every request and set no
cookie, so the fix correctly refused to POST and the test lost the URL it
asserts on. It now mints a token for /api/csrf and additionally checks
the handshake stays on the .cn origin.
Signing in to Bambu Cloud with an authenticator-app account failed every
time with "Invalid code", whatever the code was. Bambu Lab added double-
submit CSRF protection to the bambulab.com web origin - which is where,
and only where, this service posts the two-factor code. The endpoint
refused the request with 403 "CSRF error: missing_cookie" before it ever
evaluated the code, and Bambuddy reported that refusal as a bad code.
Verified against the live endpoint with a deliberately invalid key: a
bare POST returns missing_cookie; GET /api/csrf mints a bbl_csrf_token
cookie; a POST carrying only the cookie returns missing_header; a POST
carrying the cookie plus an x-bbl-csrf-token header reaches application
logic. Landing on the sign-in page first - the intuitive fix - does not
help, as that page sets only Cloudflare's __cf_bm. Of five header
spellings tried, only x-bbl-csrf-token is accepted, so the tests pin it.
verify_totp now performs that handshake against the same origin it will
post to (bambulab.cn for the China region - a token minted by the global
site is a cookie the .cn endpoint never issued), and declines to submit
the code at all when no token can be obtained rather than burning the
user's 30-second TOTP window on a request that is certain to be refused.
A CSRF refusal now also says the code was never checked instead of
masquerading as a wrong code, which is what sent the reporter chasing
clock drift and leading-zero parsing.
Only TOTP sign-ins were affected. Every other cloud call, the email-code
two-factor path included, goes to api.bambulab.com, which is not gated,
and existing stored tokens were unaffected throughout.
The region-routing test's MockTransport needed teaching about the
handshake: it returns one canned response for every request and set no
cookie, so the fix correctly refused to POST and the test lost the URL it
asserts on. It now mints a token for /api/csrf and additionally checks
the handshake stays on the .cn origin.
Published models often deviate from the stock Bambu profile on purpose -
five walls, 100% infill, a 0.1mm first layer. Re-slicing one for a
different printer discarded all of it: the picked process preset
overrides the file's embedded settings, and that override is precisely
what makes cross-printer re-slicing work, so it cannot just be dropped.
"Slice as designed" (#2611) does not help - it is all-or-nothing and
only offered when the picked printer already matches the design's
target.
The deviation list does not have to be computed. Bambu Studio writes it
into the 3MF as different_settings_to_system, laid out as
[process, *filaments, printer] - verified against real files at 2, 3 and
4 filament slots. The parser refuses any file whose array length
contradicts its own filament count rather than guessing an index, since
reading the printer slot as the process slot would carry the designer's
machine_start_gcode onto a foreign printer.
The slice dialog now lists exactly which print settings the author
changed and what each was set to, with a checkbox per setting. Design
intent - wall count, infill, layer and first-layer height, supports,
seam, brim, ironing - is ticked by default. Printer-specific values -
speeds, accelerations, jerk, fans, temperatures, prime-tower geometry -
are listed with a badge but start unticked: tuned for the author's
machine, they can be merely wrong on the target or outside the range its
profile accepts, which fails the slice outright.
Only ticked keys are sent, and only keys the source actually flags as
changed are applied. Values are written into the outgoing process JSON,
the same mechanism the support carry-over has used since #1881: for a
Standard preset pick that JSON is an inherits stub, so the patch is the
child in the chain and wins over the flattened parent. Process slot
only - filament picks are honoured as chosen.
The wiki's "this is not a settings merge" note under Slice as designed
described the gap this closes; rewritten to point at the new panel.
Translated in all locales; wiki updated. Covered by backend and frontend
tests.
Size S exists for one job: watching a whole fleet on a single screen. It
rendered the printer name, a status pip and a progress bar - every other
block on the card is gated behind the expanded view - so it could not
answer the question that view is for, "which printer finishes first".
Dropping to S to fit more printers meant losing the information you
dropped down to compare.
The compact card now carries one line of metrics under the progress bar
while a print is running: remaining time, ETA in the configured
12/24-hour format, and layer progress. These are the values the Medium
card already shows, rendered with the same formatters and the same ETA
styling so the two sizes read alike. Each value is omitted individually
when the printer does not report it, and the row holds its height when
nothing is printing so cards do not shift as prints start and finish.
Card dimensions and grid density are otherwise unchanged.
Frontend only. Wiki updated. Covered by tests - which required teaching
the new test file to mock localStorage.getItem, since the harness
replaces localStorage with bare vi.fn() stubs and setItem is a no-op;
without that the page falls back to its size-M default and the compact
branch never renders.
When a print reaches a terminal state Bambuddy holds the queue until
someone confirms the build plate is clear. That gate was visible only in
the Web UI: the printer's own MQTT push reports nothing beyond RUNNING,
PAUSE, FAILED, FINISH and IDLE, so an external automation could not tell
"finished" from "finished and still waiting for a human".
The per-printer status topic now carries an awaiting_plate_clear field,
and every transition is additionally published on a new retained topic,
bambuddy/printers/{serial}/plate_clear. Retained, and published from the
flag itself rather than from printer telemetry: a subscriber learns the
state of every printer the moment it connects, and the state stays
correct after Auto Off powers a printer down - telemetry stops there,
which would otherwise leave the status topic frozen at false.
Publishing is edge-triggered. The queue clears the gate on every
dispatch whether or not it was up, and no subscriber should see a
"plate cleared" for a plate that was never dirty. Persistence and the
WebSocket broadcast stay unconditional; they are idempotent and predate
this.
A matching Plate Clear Required notification event was added, off by
default on every provider because it fires after every print at the
same moment as the print-complete alert. Only the rising edge notifies.
Acknowledging still goes through POST /printers/{id}/clear-plate.
Two tests in test_printer_manager_status_broadcast.py asserted
_schedule_async.call_count == 2 for the setter. The new emission makes
it three on a transition, so they now assert that the persist and
broadcast coroutines are actually scheduled - which is the contract
Translated in all locales; wiki updated. Covered by backend and
frontend tests.
A spool created by Quick Add, a CSV import or an RFID scan has no slicer
preset, brand or subtype. Reopening it in Edit Spool demanded all three
before anything could be saved, so changing its storage location, cost
or notes was impossible - and Copy Spool had the same gate with no Quick
Add toggle to waive it. The preset you were then forced to pick auto-
filled material, brand and subtype from the preset name, silently
rewriting a hand-entered manufacturer (Elegoo -> Generic) so the spool
no longer appeared where it had been filed.
Editing and copying now require only what the backend requires: the
material. Preset, brand and subtype stay fully visible and editable -
nothing is hidden the way Quick Add hides it - and the required-field
markers no longer advertise a rule that isn't enforced. Selecting a
preset fills only fields that are still empty or that a previously
selected preset had filled, so values the user (or the saved spool)
provided survive; switching between presets still replaces what the
earlier one contributed.
The brand and material dropdowns also no longer filter themselves down
to the brand/material pairs known to the color catalog and slicer
presets. Elegoo is catalogued only for PLA, which made a real product
like Elegoo ASA look impossible to enter. Both lists now always offer
everything known, with paired entries ranked first under Suggested and
the rest under All, and a spool's own custom brand or material is always
present in its own dropdown. The SpoolBuddy write-tag form shares these
fields and gets the same treatment.
Lastly the Quick Add layout no longer leaks out of create mode: quick-
adding a spool and then opening Edit left the edit form in the reduced
layout with no toggle to leave it, because the toggle is create-only.
Frontend only. Translated in all locales; wiki updated. Covered by
validation and form-interaction tests.
maziggy