After an RTSP session dropped, ffmpeg could keep writing the same JPEG
indefinitely with no connection to the printer left (two hours at ~29 fps
on a P2S), and every check that counts frames saw a healthy stream. The
stream now restarts ffmpeg after 20 s without a changed frame, on the
existing reconnect path, while viewers stay attached. If the first frame
after the restart is the same picture again, the camera really shows a
still scene (a dark, idle chamber): it is then only re-checked every
5 minutes until the picture changes.
OrcaSlicer's Sync filaments finds a slot's preset by the slot's filament
ID alone. The Configure dialog looked up an Orca profile's ID in the
browser and quietly sent the generic for the material when that came back
empty, so Orca custom filaments reached the slicer as Generic and the log
showed nothing. configure now resolves the ID on the server from
orca_profile_id, follows inherits to the parent profile or the Bambu
filament it was copied from, logs the outcome and reports a fallback,
which the dialog shows as a warning.
Slot presets also store the filament ID they were written with, so the
slot card and the Configure dialog stop showing a preset once the slot is
changed from OrcaSlicer's Device tab or the printer.
Re-configuring a slot for another filament no longer carries over the old
filament's active K-profile, which switched the slot back to the old
filament.
The File Manager and G-code viewer were sized to 100vh-64px on lg+,
subtracting a top bar that only exists in the compact layout, which
left a 64px empty band under both pages. Use lg:h-screen instead.
The frame an external link opens in can't navigate the Bambuddy
window, so links like Bambuddy Orders' "In Bambuddy" did nothing.
The framed page can now post bambuddy:navigate with a path; it is
accepted only from the frame, from the link's origin, and for a path
inside Bambuddy. The theme message announces canNavigate.
After an RTSP session dropped, ffmpeg could keep writing the same JPEG
indefinitely with no connection to the printer left (two hours at ~29 fps
on a P2S), and every check that counts frames saw a healthy stream. The
stream now restarts ffmpeg after 20 s without a changed frame, on the
existing reconnect path, while viewers stay attached. If the first frame
after the restart is the same picture again, the camera really shows a
still scene (a dark, idle chamber): it is then only re-checked every
5 minutes until the picture changes.
OrcaSlicer's Sync filaments finds a slot's preset by the slot's filament
ID alone. The Configure dialog looked up an Orca profile's ID in the
browser and quietly sent the generic for the material when that came back
empty, so Orca custom filaments reached the slicer as Generic and the log
showed nothing. configure now resolves the ID on the server from
orca_profile_id, follows inherits to the parent profile or the Bambu
filament it was copied from, logs the outcome and reports a fallback,
which the dialog shows as a warning.
Slot presets also store the filament ID they were written with, so the
slot card and the Configure dialog stop showing a preset once the slot is
changed from OrcaSlicer's Device tab or the printer.
Re-configuring a slot for another filament no longer carries over the old
filament's active K-profile, which switched the slot back to the old
filament.
The File Manager and G-code viewer were sized to 100vh-64px on lg+,
subtracting a top bar that only exists in the compact layout, which
left a 64px empty band under both pages. Use lg:h-screen instead.
- Expired messages stay readable under a collapsed "Earlier" section, as
long as the feed keeps them (12 months, at most 50). They never count as
unread or raise a banner; withdrawn ones are gone everywhere.
- Each message is one row (level, date, title) that opens in place.
Unread ones carry a dot and a New chip, and opening one is what marks
it read; the banner's Read more opens the panel on its message.
- A fetch that brings a newer feed broadcasts an empty
announcements_changed event, so open pages show the new dot and banner
without a reload.
- The sidebar entry is a megaphone icon with an unread badge, in the
footer row left of System. Footer icons are 32px with no gap so seven
fit an expanded sidebar; with authentication on, logout used to wrap
onto a line of its own.
Fetch a signed feed.json from the public bambuddy-notifications repo on
GitHub at startup and every 6 hours. Nothing about the install is sent;
targeting (version, beta channel, install type) is decided locally.
- Ed25519 against a key built into the app; an older serial is refused so a
withdrawn message can't come back. The feed replaces the stored list, and
a failed or rejected fetch keeps the last good one.
- Sidebar entry above System with an unread count, a slide-over list, and a
banner for unread important/critical messages. Read state per user.
- Admins by default; Settings > General > Updates can show them to all
users or switch them off, which also stops the fetch.
- Plain text only; links to github.com and bambuddy.cool only.
ams_get_rfid was published and reported as success without reading the
printer's answer. X1Plus on base 01.08.02.00 answers FAIL / ERROR STATE,
so the user saw "Refreshing" and the K profile was re-applied to a slot
that was never read.
- Wait for the ams_get_rfid answer (matched by sequence_id).
- On a refusal from an idle X1/P1/A1, send the legacy M620 R<ams*4+slot>
gcode Bambu Studio uses for those models, AMS units 0-3 only. Never
during a job, never on newer-protocol models; printers that accept
ams_get_rfid never see it.
- Refused: the route returns 400 with the printer's reason and no PA
re-apply is scheduled. No answer still counts as accepted.
- Log the answers at INFO so refusals reach support bundles.
With authentication on, {finish_photo_url} pointed at the archive photo
route, which needs a media token. A link tapped in Telegram, CallMeBot
or a Home Assistant notification has none, so it only ever answered 401.
_finish_photo_for_notification() now builds the link and the attachment
bytes. With authentication off the link is the archive URL, unchanged.
With it on, the photo is also saved through the notification photo
store from #3199, and the link points there. That is an unguessable
name that opens this one photo, for 3 days. If the auth check fails,
it is treated as on. With auth on and the photo missing, no link is
set rather than one that 401s. Photos over 2.5 MB are still linked but
not attached, as before.
tsc -b re-checked every file on every run: the configs named a
tsBuildInfoFile but never switched incremental on, and with noEmit there
are no outputs for -b to compare against. Enabling incremental in
tsconfig.app.json and tsconfig.node.json makes later runs reuse the
cache (28 s -> 0.5 s when nothing changed).
eslint ran on one thread with no cache. The lint script now uses
--concurrency auto and --cache in node_modules/.cache/eslint/
(42 s -> 14 s on a first run, 1.3 s after that). The config isn't
type-aware, so the cache is safe.
test_frontend.sh runs typecheck and lint in parallel, then the tests,
and exits 1 if any step fails. Before, a type or lint error scrolled
past and the exit code only reflected the tests.
maziggy