Fix SpoolBuddy scale first reading and extract hardware drivers

The NAU7802 ADC returns a stale max-scale value (0x7FFFFF) on its
  first conversion after power-up, polluting the moving average and
  making the initial weight report wildly inaccurate. Flush the first
  reading during init().

  Also extract both hardware drivers out of diagnostic scripts into
  proper daemon modules:
  - NAU7802 scale driver: scripts/scale_diag.py -> daemon/nau7802.py
  - PN5180 NFC driver: scripts/read_tag.py -> daemon/pn5180.py

  The production daemon was importing driver classes from test scripts
  since the original SpoolBuddy commit. Diagnostic scripts now import
  from the driver modules. Removed the sys.path hack from main.py.

CHANGELOG.md

@@ -26,6 +26,7 @@ All notable changes to Bambuddy will be documented in this file.
 - **Spool Assignment on Empty AMS Slots** ([#784](https://github.com/maziggy/bambuddy/issues/784)) — Empty AMS slots (no physical spool detected) showed "Assign Spool" and "Configure" buttons in the hover popup. Assigning a spool to an empty slot created a stuck state because no "Unassign" button is available for empty slots. Truly empty slots now hide both buttons, while slots with a spool inserted but filament not loaded still show configure/assign. Also fixed stale AMS slot data on H2D and other printers that only send `{id, state}` in incremental MQTT updates — filament load/unload transitions now update in real-time without requiring a reconnect. Reported by @RosdasHH.
 - **Log Flood: "State is FINISH but completion NOT triggered"** ([#790](https://github.com/maziggy/bambuddy/issues/790)) — A diagnostic log message introduced in 0.2.2.1 fired on every MQTT update while a printer sat in FINISH or FAILED state, flooding logs with thousands of lines per minute in printer farms. Fixed by only logging once on the initial state transition. Reported by @user.
 - **H2D External Spool Print Fails With "Failed to get AMS mapping table"** ([#797](https://github.com/maziggy/bambuddy/issues/797)) — Printing from an external spool on H2D (and H2D Pro) through Bambuddy failed with `0700_8012 "Failed to get AMS mapping table"`, while the same print worked fine from BambuStudio. Bambuddy was passing raw virtual tray IDs (254/255) in the flat `ams_mapping` array, but BambuStudio converts these to -1 and relies on `ams_mapping2` for external spool routing. The H2D firmware rejects raw 254/255 in the flat array. Also fixed the `ams_mapping2` format for external trays — each virtual tray is its own AMS unit with `slot_id: 0`, not a shared unit differentiated by slot. Reported by @Lukas-ESG.
+- **SpoolBuddy Scale First Reading Always Wrong** — The NAU7802 ADC always returns a stale max-scale value (`0x7FFFFF`) on its first conversion after power-up, which polluted the moving average and made the initial weight report wildly inaccurate. Fixed by flushing the first reading during `init()` so all subsequent reads return valid data. Also extracted both hardware drivers out of diagnostic scripts into proper modules — the NAU7802 scale driver from `scripts/scale_diag.py` into `daemon/nau7802.py`, and the PN5180 NFC driver from `scripts/read_tag.py` into `daemon/pn5180.py`. The production daemon was importing driver classes from test scripts since the original SpoolBuddy commit. Removed the now-unnecessary `sys.path` hack from `main.py`.
 - **ffmpeg Process Leak Causing Memory Growth** ([#776](https://github.com/maziggy/bambuddy/issues/776)) — Camera stream ffmpeg processes accumulated over time, consuming several GB of RAM. When a user closed the camera viewer, the frontend sent a stop signal that killed the ffmpeg process, but the backend stream generator interpreted the dead process as a dropped connection and respawned ffmpeg — up to 30 reconnection attempts per stream. The orphan cleanup couldn't catch these because they were tracked as "active". Fixed by signaling the generator's disconnect event from the stop endpoint before killing the process, checking for stream removal before reconnecting, and tracking frame timestamps per-stream instead of per-printer so stale detection works correctly when multiple streams exist. Reported by @ChrisTheDBA, confirmed by @peter-k-de.
 
 ## [0.2.2.1] - 2026-03-22

spoolbuddy/daemon/main.py

@@ -4,16 +4,12 @@
 import asyncio
 import logging
 import os
-import shutil
 import socket
 import subprocess
 import sys
 import time
 from pathlib import Path
 
-# Add scripts/ to sys.path so hardware drivers (read_tag, scale_diag) are importable
-sys.path.insert(0, str(Path(__file__).resolve().parent.parent / "scripts"))
-
 from . import __version__
 from .api_client import APIClient
 from .config import Config

spoolbuddy/daemon/nau7802.py

@@ -0,0 +1,156 @@
+"""NAU7802 24-bit ADC driver for load cell / scale applications.
+
+I2C address: 0x2A
+Bus: /dev/i2c-1 (GPIO2/GPIO3 on RPi)
+"""
+
+import logging
+import os
+import struct
+import time
+
+import smbus2
+
+logger = logging.getLogger(__name__)
+
+
+def _env_int(name: str, default: int) -> int:
+    value = os.environ.get(name)
+    if value is None or value == "":
+        return default
+    try:
+        return int(value)
+    except ValueError:
+        return default
+
+
+I2C_BUS = _env_int("SPOOLBUDDY_I2C_BUS", 1)
+NAU7802_ADDR = 0x2A
+
+# Register addresses
+REG_PU_CTRL = 0x00
+REG_CTRL1 = 0x01
+REG_CTRL2 = 0x02
+REG_ADCO_B2 = 0x12  # ADC output MSB
+REG_ADCO_B1 = 0x13
+REG_ADCO_B0 = 0x14  # ADC output LSB
+REG_ADC = 0x15
+REG_PGA = 0x1B
+REG_PWR_CTRL = 0x1C
+REG_REVISION = 0x1F
+
+# PU_CTRL bits
+PU_RR = 0x01  # Register reset
+PU_PUD = 0x02  # Power up digital
+PU_PUA = 0x04  # Power up analog
+PU_PUR = 0x08  # Power up ready (read-only)
+PU_CS = 0x10  # Cycle start
+PU_CR = 0x20  # Cycle ready (read-only)
+PU_OSCS = 0x40  # Oscillator select
+PU_AVDDS = 0x80  # AVDD source select
+
+
+class NAU7802:
+    def __init__(self, bus: int = I2C_BUS, addr: int = NAU7802_ADDR):
+        self._bus_num = bus
+        self._bus = smbus2.SMBus(bus)
+        self._addr = addr
+
+    def close(self):
+        self._bus.close()
+
+    def read_reg(self, reg: int) -> int:
+        return self._bus.read_byte_data(self._addr, reg)
+
+    def write_reg(self, reg: int, val: int):
+        self._bus.write_byte_data(self._addr, reg, val & 0xFF)
+
+    def _update_bits(self, reg: int, mask: int, value: int):
+        cur = self.read_reg(reg)
+        self.write_reg(reg, (cur & ~mask) | (value & mask))
+
+    def _set_bit(self, reg: int, bit: int, enabled: bool):
+        mask = 1 << bit
+        self._update_bits(reg, mask, mask if enabled else 0)
+
+    def _set_field(self, reg: int, shift: int, width: int, value: int):
+        mask = ((1 << width) - 1) << shift
+        self._update_bits(reg, mask, value << shift)
+
+    def init(self):
+        """Initialize NAU7802 using the Adafruit library startup sequence."""
+
+        # Reset
+        self._set_bit(REG_PU_CTRL, 0, True)  # RR=1
+        time.sleep(0.010)
+        self._set_bit(REG_PU_CTRL, 0, False)  # RR=0
+        self._set_bit(REG_PU_CTRL, 1, True)  # PUD=1
+        time.sleep(0.001)
+
+        # Enable digital + analog and allow analog section to settle.
+        self._set_bit(REG_PU_CTRL, 1, True)  # PUD=1
+        self._set_bit(REG_PU_CTRL, 2, True)  # PUA=1
+        time.sleep(0.600)
+
+        # Start conversion cycle (PU_CS bit 4) after power-up.
+        self._set_bit(REG_PU_CTRL, 4, True)
+
+        # Wait for power-up ready (PU_PUR bit 3)
+        for _ in range(100):
+            status = self.read_reg(REG_PU_CTRL)
+            if status & PU_PUR:
+                break
+            time.sleep(0.001)
+        else:
+            raise TimeoutError("NAU7802 power-up timeout")
+
+        # Check revision register low nibble (Adafruit expects 0xF).
+        revision = self.read_reg(REG_REVISION)
+        if (revision & 0x0F) != 0x0F:
+            raise RuntimeError(f"Unexpected NAU7802 revision register: 0x{revision:02X}")
+
+        logger.debug("NAU7802 revision=0x%02X", revision)
+
+        # Internal LDO enable is PU_CTRL.AVDDS (bit 7); set LDO voltage to 3.0V.
+        self._set_bit(REG_PU_CTRL, 7, True)  # AVDDS=1 (internal LDO)
+        self._set_field(REG_CTRL1, shift=3, width=3, value=0b101)  # VLDO=3.0V
+
+        # Gain: 128x (bits 2:0 of CTRL1 = 0b111)
+        self._set_field(REG_CTRL1, shift=0, width=3, value=0b111)
+
+        # Sample rate: 10 SPS (CTRL2 bits 6:4 = 0b000)
+        self._set_field(REG_CTRL2, shift=4, width=3, value=0b000)
+
+        # Adafruit tuning: disable ADC chopper clock (ADC bits 5:4 = 0b11)
+        self._set_field(REG_ADC, shift=4, width=2, value=0b11)
+
+        # Adafruit tuning: use low ESR caps (PGA bit 6 = 0)
+        self._set_bit(REG_PGA, 6, False)
+
+        # Start conversion cycle
+        self._set_bit(REG_PU_CTRL, 4, True)
+
+        # Flush the first reading — the NAU7802 always returns a stale
+        # max-scale value (0x7FFFFF) on the first conversion after power-up.
+        for _ in range(200):
+            if self.data_ready():
+                self.read_raw()  # discard
+                break
+            time.sleep(0.010)
+
+        logger.debug("NAU7802 initialized: LDO=3.0V, gain=128x, rate=10SPS")
+
+    def data_ready(self) -> bool:
+        return bool(self.read_reg(REG_PU_CTRL) & PU_CR)
+
+    def read_raw(self) -> int:
+        """Read 24-bit signed ADC value."""
+        b2 = self.read_reg(REG_ADCO_B2)
+        b1 = self.read_reg(REG_ADCO_B1)
+        b0 = self.read_reg(REG_ADCO_B0)
+        raw = (b2 << 16) | (b1 << 8) | b0
+        # Sign extend 24-bit to 32-bit
+        if raw & 0x800000:
+            raw |= 0xFF000000
+            raw = struct.unpack("i", struct.pack("I", raw))[0]
+        return raw

spoolbuddy/daemon/nfc_reader.py

@@ -28,7 +28,7 @@ class NFCReader:
         self._last_status_log = 0.0
 
         try:
-            from read_tag import PN5180
+            from .pn5180 import PN5180
 
             self._nfc = PN5180()
             self._init_rf()

spoolbuddy/daemon/pn5180.py

@@ -0,0 +1,548 @@
+"""PN5180 NFC frontend driver — ported from working Pico firmware (pico-nfc-bridge.ino).
+
+Key learnings from pico-nfc-bridge.ino:
+- Must call setTransceiveMode() before every SEND_DATA
+- waitBusy() must wait for HIGH then LOW (not just LOW)
+- Bambu tags are MIFARE Classic 1K (ISO 14443A), not ISO 15693
+- SPI at 500kHz, 5us CS setup, 100us post-CS delay
+- MFC_AUTHENTICATE (0x0C) is a PN5180 host command — Crypto1 handled in hardware
+- HKDF-SHA256 derives per-sector keys from master key + UID
+"""
+
+import hashlib
+import hmac
+import logging
+import os
+import time
+
+import gpiod
+import spidev
+
+logger = logging.getLogger(__name__)
+
+
+def _env_int(name: str, default: int) -> int:
+    value = os.environ.get(name)
+    if value is None or value == "":
+        return default
+    try:
+        return int(value)
+    except ValueError:
+        return default
+
+
+BUSY_PIN = _env_int("SPOOLBUDDY_NFC_BUSY_PIN", 25)
+RST_PIN = _env_int("SPOOLBUDDY_NFC_RST_PIN", 24)
+NSS_PIN = _env_int("SPOOLBUDDY_NFC_NSS_PIN", 23)  # Manual CS by default
+SPI_BUS = _env_int("SPOOLBUDDY_NFC_SPI_BUS", 0)
+SPI_DEVICE = _env_int("SPOOLBUDDY_NFC_SPI_DEVICE", 0)
+SPI_SPEED_HZ = _env_int("SPOOLBUDDY_NFC_SPI_SPEED_HZ", 500_000)
+
+# Bambu Lab MIFARE Classic key derivation constants (from pico-nfc-bridge.ino)
+BAMBU_MASTER_KEY = bytes(
+    [
+        0x9A,
+        0x75,
+        0x9C,
+        0xF2,
+        0xC4,
+        0xF7,
+        0xCA,
+        0xFF,
+        0x22,
+        0x2C,
+        0xB9,
+        0x76,
+        0x9B,
+        0x41,
+        0xBC,
+        0x96,
+    ]
+)
+BAMBU_CONTEXT = b"RFID-A\x00"  # 7 bytes including null terminator
+
+# Blocks to read for Bambu tag data
+BAMBU_BLOCKS = [1, 2, 4, 5]
+
+
+def hkdf_derive_keys(uid: bytes) -> bytes:
+    """Derive 96 bytes of MIFARE key material (16 sectors * 6 bytes each).
+
+    Uses HKDF-SHA256 with the Bambu master key as salt and the tag UID as IKM.
+    """
+    # HKDF-Extract: PRK = HMAC-SHA256(salt=master_key, IKM=uid)
+    prk = hmac.new(BAMBU_MASTER_KEY, uid, hashlib.sha256).digest()
+
+    # HKDF-Expand: generate 96 bytes using context "RFID-A\0"
+    okm = b""
+    t = b""
+    counter = 1
+    while len(okm) < 96:
+        t = hmac.new(prk, t + BAMBU_CONTEXT + bytes([counter]), hashlib.sha256).digest()
+        okm += t
+        counter += 1
+    return okm[:96]
+
+
+def get_sector_key(keys: bytes, block: int) -> bytes:
+    """Get the 6-byte key for the sector containing the given block."""
+    sector = block // 4
+    return keys[sector * 6 : sector * 6 + 6]
+
+
+def _find_gpio_chip():
+    for path in ["/dev/gpiochip4", "/dev/gpiochip0"]:
+        try:
+            chip = gpiod.Chip(path)
+            if "pinctrl" in chip.get_info().label:
+                return chip
+            chip.close()
+        except (FileNotFoundError, PermissionError, OSError):
+            continue
+    raise RuntimeError("No GPIO chip")
+
+
+class PN5180:
+    def __init__(self):
+        self._chip = _find_gpio_chip()
+        self._lines = self._chip.request_lines(
+            consumer="pn5180",
+            config={
+                BUSY_PIN: gpiod.LineSettings(direction=gpiod.line.Direction.INPUT),
+                RST_PIN: gpiod.LineSettings(
+                    direction=gpiod.line.Direction.OUTPUT, output_value=gpiod.line.Value.ACTIVE
+                ),
+                NSS_PIN: gpiod.LineSettings(
+                    direction=gpiod.line.Direction.OUTPUT, output_value=gpiod.line.Value.ACTIVE
+                ),
+            },
+        )
+        self._spi = spidev.SpiDev()
+        self._spi.open(SPI_BUS, SPI_DEVICE)
+        self._spi.max_speed_hz = SPI_SPEED_HZ
+        self._spi.mode = 0b00
+        self._spi.no_cs = True
+
+    def close(self):
+        self._spi.close()
+        self._lines.release()
+        self._chip.close()
+
+    def _cs_low(self):
+        self._lines.set_value(NSS_PIN, gpiod.line.Value.INACTIVE)
+        time.sleep(0.000005)  # 5us setup
+
+    def _cs_high(self):
+        self._lines.set_value(NSS_PIN, gpiod.line.Value.ACTIVE)
+        time.sleep(0.000100)  # 100us post-CS delay
+
+    def _wait_busy(self, timeout_s=1.0):
+        """Wait for BUSY to go HIGH (processing) then LOW (done) — matches Pico firmware."""
+        deadline = time.monotonic() + min(timeout_s, 0.010)
+        # Wait for BUSY HIGH (PN5180 started processing)
+        while self._lines.get_value(BUSY_PIN) != gpiod.line.Value.ACTIVE:
+            if time.monotonic() > deadline:
+                break  # Timeout waiting for HIGH — command may have processed already
+            time.sleep(0.00001)
+        # Wait for BUSY LOW (PN5180 done)
+        deadline = time.monotonic() + timeout_s
+        while self._lines.get_value(BUSY_PIN) == gpiod.line.Value.ACTIVE:
+            if time.monotonic() > deadline:
+                raise TimeoutError("BUSY timeout")
+            time.sleep(0.0001)
+
+    def _cmd(self, data):
+        self._cs_low()
+        self._spi.xfer2(list(data))
+        self._cs_high()
+        self._wait_busy()
+
+    def _read_response(self, n):
+        self._cs_low()
+        result = self._spi.xfer2([0xFF] * n)
+        self._cs_high()
+        return result
+
+    # -- Register ops --
+
+    def write_reg(self, reg, val):
+        self._cmd([0x00, reg, val & 0xFF, (val >> 8) & 0xFF, (val >> 16) & 0xFF, (val >> 24) & 0xFF])
+
+    def write_reg_or(self, reg, mask):
+        self._cmd([0x01, reg, mask & 0xFF, (mask >> 8) & 0xFF, (mask >> 16) & 0xFF, (mask >> 24) & 0xFF])
+
+    def write_reg_and(self, reg, mask):
+        self._cmd([0x02, reg, mask & 0xFF, (mask >> 8) & 0xFF, (mask >> 16) & 0xFF, (mask >> 24) & 0xFF])
+
+    def read_reg(self, reg):
+        self._cmd([0x04, reg])
+        time.sleep(0.000100)  # Extra 100us before read
+        return int.from_bytes(self._read_response(4), "little")
+
+    def read_eeprom(self, addr, length):
+        self._cmd([0x07, addr, length])
+        time.sleep(0.000100)
+        return bytes(self._read_response(length))
+
+    # -- Commands --
+
+    def reset(self):
+        self._lines.set_value(RST_PIN, gpiod.line.Value.INACTIVE)
+        time.sleep(0.050)
+        self._lines.set_value(RST_PIN, gpiod.line.Value.ACTIVE)
+        time.sleep(0.100)
+        self._wait_busy(2.0)
+        time.sleep(0.050)
+
+    def load_rf_config(self, tx, rx):
+        self.write_reg(0x03, 0xFFFFFFFF)  # Clear IRQs first
+        time.sleep(0.000100)
+        self._cmd([0x11, tx, rx])
+        time.sleep(0.010)
+
+    def rf_on(self):
+        self._cmd([0x16, 0x00])
+        time.sleep(0.010)
+
+    def rf_off(self):
+        self._cmd([0x17, 0x00])
+        time.sleep(0.005)
+
+    def set_transceive_mode(self):
+        """Set SYSTEM_CONFIG command bits to TRANSCEIVE (0x03) — CRITICAL!"""
+        sys_cfg = self.read_reg(0x00)
+        sys_cfg = (sys_cfg & 0xFFFFFFF8) | 0x03
+        self.write_reg(0x00, sys_cfg)
+
+    def send_data(self, data, valid_bits=0x00):
+        self._cs_low()
+        self._spi.xfer2([0x09, valid_bits] + list(data))
+        self._cs_high()
+        time.sleep(0.000100)
+        self._wait_busy()
+
+    def read_data(self, length):
+        self._cmd([0x0A, 0x00])
+        return bytes(self._read_response(length))
+
+    # -- ISO 14443A --
+
+    def activate_type_a(self):
+        """Full Type A activation: WUPA -> Anticollision -> SELECT. Returns (uid, sak) or None."""
+        # Crypto off, CRC off
+        self.write_reg_and(0x00, 0xFFFFFFBF)
+        self.write_reg_and(0x12, 0xFFFFFFFE)
+        self.write_reg_and(0x19, 0xFFFFFFFE)
+        self.write_reg(0x03, 0xFFFFFFFF)
+
+        # Reset to IDLE then TRANSCEIVE
+        sys_cfg = self.read_reg(0x00)
+        self.write_reg(0x00, sys_cfg & 0xFFFFFFF8)  # IDLE
+        time.sleep(0.001)
+        self.write_reg(0x00, (sys_cfg & 0xFFFFFFF8) | 0x03)  # TRANSCEIVE
+        time.sleep(0.002)
+
+        # WUPA (7-bit)
+        self.send_data([0x52], valid_bits=0x07)
+        time.sleep(0.005)
+
+        rx_status = self.read_reg(0x13)
+        rx_len = rx_status & 0x1FF
+        if rx_len < 2 or rx_len == 511:
+            # Try REQA
+            self.write_reg(0x03, 0xFFFFFFFF)
+            time.sleep(0.002)
+            self.set_transceive_mode()
+            time.sleep(0.002)
+            self.send_data([0x26], valid_bits=0x07)
+            time.sleep(0.005)
+            rx_status = self.read_reg(0x13)
+            rx_len = rx_status & 0x1FF
+            if rx_len < 2 or rx_len == 511:
+                return None
+
+        atqa = self.read_data(2)
+        if atqa[0] == 0xFF or atqa[0] == 0x00:
+            return None
+
+        # Anti-collision Level 1
+        self.write_reg(0x03, 0xFFFFFFFF)
+        self.set_transceive_mode()
+        time.sleep(0.002)
+
+        self.send_data([0x93, 0x20])
+        time.sleep(0.010)
+
+        rx_status = self.read_reg(0x13)
+        rx_len = rx_status & 0x1FF
+        if rx_len < 5 or rx_len > 64:
+            return None
+
+        uid_buf = self.read_data(5)
+        uid = uid_buf[:4]
+        bcc = uid[0] ^ uid[1] ^ uid[2] ^ uid[3]
+        if bcc != uid_buf[4]:
+            return None
+
+        # SELECT
+        self.write_reg(0x03, 0xFFFFFFFF)
+        self.set_transceive_mode()
+        time.sleep(0.002)
+
+        # Enable CRC for SELECT
+        self.write_reg_or(0x19, 0x01)
+        self.write_reg_or(0x12, 0x01)
+
+        self.send_data([0x93, 0x70, uid[0], uid[1], uid[2], uid[3], bcc])
+        time.sleep(0.010)
+
+        rx_status = self.read_reg(0x13)
+        rx_len = rx_status & 0x1FF
+        if rx_len < 1:
+            return None
+
+        sak_buf = self.read_data(min(rx_len, 3))
+        sak = sak_buf[0]
+
+        return bytes(uid), sak
+
+    # -- MIFARE Classic --
+
+    def mfc_authenticate(self, block: int, key: bytes, uid: bytes) -> bool:
+        """MIFARE Classic authentication via PN5180 MFC_AUTHENTICATE (0x0C).
+
+        The PN5180 handles Crypto1 internally. After success, bit 6 of
+        SYSTEM_CONFIG is set (MFC_CRYPTO1_ON) and all subsequent RF
+        communication is encrypted/decrypted by the hardware.
+
+        Args:
+            block: Block number to authenticate
+            key: 6-byte MIFARE Key A
+            uid: 4-byte tag UID
+        Returns:
+            True if authentication succeeded
+        """
+        # Wait for BUSY LOW before starting
+        deadline = time.monotonic() + 0.100
+        while self._lines.get_value(BUSY_PIN) == gpiod.line.Value.ACTIVE:
+            if time.monotonic() > deadline:
+                return False
+            time.sleep(0.001)
+
+        # MFC_AUTHENTICATE: [0x0C][key 6B][keyType][blockNo][uid 4B] = 13 bytes
+        cmd = [0x0C] + list(key) + [0x60, block] + list(uid[:4])
+        self._cs_low()
+        self._spi.xfer2(cmd)
+        self._cs_high()
+
+        # Wait for BUSY HIGH then LOW (auth can take up to 1s)
+        self._wait_busy(timeout_s=1.0)
+
+        # Read 1-byte response: 0x00 = success
+        self._cs_low()
+        response = self._spi.xfer2([0xFF])
+        self._cs_high()
+
+        return response[0] == 0x00
+
+    def mfc_read_block(self, block: int) -> bytes | None:
+        """Read a 16-byte MIFARE Classic block (must be authenticated first).
+
+        Returns 16 bytes of block data, or None on failure.
+        """
+        # Clear IRQs
+        self.write_reg(0x03, 0xFFFFFFFF)
+
+        # Set transceive mode (Crypto1 stays active from MFC_AUTHENTICATE)
+        self.set_transceive_mode()
+        time.sleep(0.001)
+
+        # Enable TX and RX CRC for encrypted read
+        self.write_reg_or(0x19, 0x01)
+        self.write_reg_or(0x12, 0x01)
+
+        # Send MIFARE READ command: 0x30 + block number
+        self.send_data([0x30, block])
+        time.sleep(0.010)
+
+        # Check RX status
+        rx_status = self.read_reg(0x13)
+        rx_len = rx_status & 0x1FF
+        if rx_len != 16:
+            return None
+
+        return self.read_data(16)
+
+    def ntag_read_pages(self, start_page: int, num_pages: int) -> bytes | None:
+        """Read NTAG pages (4 bytes each). No authentication required.
+
+        Uses NTAG READ command (0x30) which returns 4 pages (16 bytes) at a time.
+        CRC must be disabled for NTAG reads.
+        """
+        # Disable CRC for NTAG
+        self.write_reg_and(0x19, 0xFFFFFFFE)  # TX CRC off
+        self.write_reg_and(0x12, 0xFFFFFFFE)  # RX CRC off
+
+        result = bytearray()
+        pages_read = 0
+        while pages_read < num_pages:
+            self.write_reg(0x03, 0xFFFFFFFF)  # Clear IRQs
+            self.set_transceive_mode()
+            time.sleep(0.001)
+
+            # READ command: 0x30 + page number -> returns 16 bytes (4 pages)
+            self.send_data([0x30, start_page + pages_read])
+            time.sleep(0.005)
+
+            rx_status = self.read_reg(0x13)
+            rx_len = rx_status & 0x1FF
+            if rx_len < 16:
+                return None
+
+            data = self.read_data(16)
+            # Copy only the pages we need
+            pages_to_copy = min(4, num_pages - pages_read)
+            result.extend(data[: pages_to_copy * 4])
+            pages_read += 4  # Always advances by 4 (READ returns 4 pages)
+
+        return bytes(result)
+
+    def reactivate_card(self) -> tuple[bytes, int] | None:
+        """RF cycle and full re-select of the card. Returns (uid, sak) or None."""
+        self.rf_off()
+        time.sleep(0.010)
+
+        self.write_reg(0x03, 0xFFFFFFFF)  # Clear IRQs
+        self.load_rf_config(0x00, 0x80)  # ISO 14443A
+        time.sleep(0.005)
+
+        self.rf_on()
+        time.sleep(0.020)
+
+        return self.activate_type_a()
+
+    def read_bambu_tag(self, uid: bytes) -> dict[int, bytes] | None:
+        """Read Bambu tag data blocks using HKDF-derived keys.
+
+        Args:
+            uid: 4-byte tag UID (from activate_type_a)
+        Returns:
+            Dict mapping block number -> 16 bytes of data, or None on failure
+        """
+        # Derive per-sector keys from UID
+        keys = hkdf_derive_keys(uid)
+
+        # Clear Crypto1 state and IRQs
+        self.write_reg_and(0x00, 0xFFFFFFBF)  # Clear MFC_CRYPTO1_ON (bit 6)
+        self.write_reg(0x03, 0xFFFFFFFF)
+
+        # Reactivate card (may have timed out)
+        result = self.reactivate_card()
+        if result is None:
+            logger.debug("Failed to reactivate card for Bambu tag read")
+            return None
+
+        uid_check, _ = result
+        if uid_check != uid:
+            logger.debug("UID mismatch after reactivation: %s != %s", uid_check.hex(), uid.hex())
+            return None
+
+        # Read blocks with per-sector authentication
+        blocks = {}
+        current_sector = -1
+
+        for block in BAMBU_BLOCKS:
+            sector = block // 4
+
+            # Authenticate when entering a new sector
+            if sector != current_sector:
+                key = get_sector_key(keys, block)
+                if not self.mfc_authenticate(block, key, uid):
+                    logger.debug("Auth failed for block %d (sector %d)", block, sector)
+                    return None
+                current_sector = sector
+
+            # Read the block
+            data = self.mfc_read_block(block)
+            if data is None:
+                logger.debug("Read failed for block %d", block)
+                return None
+            blocks[block] = data
+
+        return blocks
+
+    def ntag_write_page(self, page: int, data: bytes) -> bool:
+        """Write 4 bytes to a single NTAG page.
+
+        NTAG WRITE command: 0xA2 + page_number + 4 bytes data.
+        CRC disabled (same as reads). Returns True on ACK (0x0A).
+        """
+        if len(data) != 4:
+            return False
+
+        # Disable CRC
+        self.write_reg_and(0x19, 0xFFFFFFFE)  # TX CRC off
+        self.write_reg_and(0x12, 0xFFFFFFFE)  # RX CRC off
+
+        # Clear IRQs and set transceive mode
+        self.write_reg(0x03, 0xFFFFFFFF)
+        self.set_transceive_mode()
+        time.sleep(0.001)
+
+        # WRITE command: 0xA2 + page + 4 bytes
+        self.send_data([0xA2, page] + list(data))
+        time.sleep(0.005)
+
+        # Check for ACK: NTAG ACK is 4-bit 0x0A
+        rx_status = self.read_reg(0x13)
+        rx_len = rx_status & 0x1FF
+        if rx_len < 1:
+            return False
+
+        ack = self.read_data(1)
+        return ack[0] == 0x0A
+
+    def ntag_write_pages(self, start_page: int, data: bytes) -> bool:
+        """Write data to consecutive NTAG pages starting at start_page.
+
+        Pads last chunk to 4 bytes. Verifies by reading back.
+        Returns True if write + verify succeeded.
+        """
+        # Pad to 4-byte boundary
+        padded = bytearray(data)
+        while len(padded) % 4 != 0:
+            padded.append(0x00)
+
+        # Write page by page
+        for i in range(0, len(padded), 4):
+            page = start_page + (i // 4)
+            chunk = bytes(padded[i : i + 4])
+            if not self.ntag_write_page(page, chunk):
+                return False
+            time.sleep(0.002)
+
+        # Reactivate card for verification read
+        result = self.reactivate_card()
+        if result is None:
+            return False
+
+        # Read back and verify
+        num_pages = len(padded) // 4
+        readback = self.ntag_read_pages(start_page, num_pages)
+        if readback is None:
+            return False
+
+        return readback[: len(data)] == data
+
+    def read_ntag(self, uid: bytes) -> bytes | None:
+        """Read NTAG pages 4-20 (NDEF data area, 68 bytes). No auth needed.
+
+        Used for SpoolEase / OpenPrintTag community tags.
+        """
+        # Reactivate card
+        result = self.reactivate_card()
+        if result is None:
+            logger.debug("Failed to reactivate card for NTAG read")
+            return None
+
+        return self.ntag_read_pages(start_page=4, num_pages=17)

spoolbuddy/daemon/scale_reader.py

@@ -20,7 +20,7 @@ class ScaleReader:
         self._last_raw = 0
 
         try:
-            from scale_diag import NAU7802
+            from .nau7802 import NAU7802
 
             self._scale = NAU7802()
             self._scale.init()

spoolbuddy/scripts/read_tag.py

@@ -1,550 +1,19 @@
 #!/usr/bin/env python3
-"""PN5180 NFC tag reader — ported from working Pico firmware (pico-nfc-bridge.ino).
+"""PN5180 NFC Tag Reader diagnostic script.
 
-Key learnings from pico-nfc-bridge.ino:
-- Must call setTransceiveMode() before every SEND_DATA
-- waitBusy() must wait for HIGH then LOW (not just LOW)
-- Bambu tags are MIFARE Classic 1K (ISO 14443A), not ISO 15693
-- SPI at 500kHz, 5µs CS setup, 100µs post-CS delay
-- MFC_AUTHENTICATE (0x0C) is a PN5180 host command — Crypto1 handled in hardware
-- HKDF-SHA256 derives per-sector keys from master key + UID
+Standalone diagnostic — the PN5180 driver lives in
+spoolbuddy/daemon/pn5180.py and is imported from there.
+
+Supports: Bambu (MIFARE Classic) + NTAG (SpoolEase/OpenPrintTag)
 """
 
-import hashlib
-import hmac
-import os
 import sys
 import time
+from pathlib import Path
 
-import gpiod
-import spidev
-
-
-def _env_int(name: str, default: int) -> int:
-    value = os.environ.get(name)
-    if value is None or value == "":
-        return default
-    try:
-        return int(value)
-    except ValueError:
-        return default
-
-
-BUSY_PIN = _env_int("SPOOLBUDDY_NFC_BUSY_PIN", 25)
-RST_PIN = _env_int("SPOOLBUDDY_NFC_RST_PIN", 24)
-NSS_PIN = _env_int("SPOOLBUDDY_NFC_NSS_PIN", 23)  # Manual CS by default
-SPI_BUS = _env_int("SPOOLBUDDY_NFC_SPI_BUS", 0)
-SPI_DEVICE = _env_int("SPOOLBUDDY_NFC_SPI_DEVICE", 0)
-SPI_SPEED_HZ = _env_int("SPOOLBUDDY_NFC_SPI_SPEED_HZ", 500_000)
-
-# Bambu Lab MIFARE Classic key derivation constants (from pico-nfc-bridge.ino)
-BAMBU_MASTER_KEY = bytes(
-    [
-        0x9A,
-        0x75,
-        0x9C,
-        0xF2,
-        0xC4,
-        0xF7,
-        0xCA,
-        0xFF,
-        0x22,
-        0x2C,
-        0xB9,
-        0x76,
-        0x9B,
-        0x41,
-        0xBC,
-        0x96,
-    ]
-)
-BAMBU_CONTEXT = b"RFID-A\x00"  # 7 bytes including null terminator
-
-# Blocks to read for Bambu tag data
-BAMBU_BLOCKS = [1, 2, 4, 5]
-
-
-def hkdf_derive_keys(uid: bytes) -> bytes:
-    """Derive 96 bytes of MIFARE key material (16 sectors * 6 bytes each).
-
-    Uses HKDF-SHA256 with the Bambu master key as salt and the tag UID as IKM.
-    """
-    # HKDF-Extract: PRK = HMAC-SHA256(salt=master_key, IKM=uid)
-    prk = hmac.new(BAMBU_MASTER_KEY, uid, hashlib.sha256).digest()
-
-    # HKDF-Expand: generate 96 bytes using context "RFID-A\0"
-    okm = b""
-    t = b""
-    counter = 1
-    while len(okm) < 96:
-        t = hmac.new(prk, t + BAMBU_CONTEXT + bytes([counter]), hashlib.sha256).digest()
-        okm += t
-        counter += 1
-    return okm[:96]
-
-
-def get_sector_key(keys: bytes, block: int) -> bytes:
-    """Get the 6-byte key for the sector containing the given block."""
-    sector = block // 4
-    return keys[sector * 6 : sector * 6 + 6]
-
-
-def _find_gpio_chip():
-    for path in ["/dev/gpiochip4", "/dev/gpiochip0"]:
-        try:
-            chip = gpiod.Chip(path)
-            if "pinctrl" in chip.get_info().label:
-                return chip
-            chip.close()
-        except (FileNotFoundError, PermissionError, OSError):
-            continue
-    raise RuntimeError("No GPIO chip")
-
-
-class PN5180:
-    def __init__(self):
-        self._chip = _find_gpio_chip()
-        self._lines = self._chip.request_lines(
-            consumer="pn5180",
-            config={
-                BUSY_PIN: gpiod.LineSettings(direction=gpiod.line.Direction.INPUT),
-                RST_PIN: gpiod.LineSettings(
-                    direction=gpiod.line.Direction.OUTPUT, output_value=gpiod.line.Value.ACTIVE
-                ),
-                NSS_PIN: gpiod.LineSettings(
-                    direction=gpiod.line.Direction.OUTPUT, output_value=gpiod.line.Value.ACTIVE
-                ),
-            },
-        )
-        self._spi = spidev.SpiDev()
-        self._spi.open(SPI_BUS, SPI_DEVICE)
-        self._spi.max_speed_hz = SPI_SPEED_HZ
-        self._spi.mode = 0b00
-        self._spi.no_cs = True
-
-    def close(self):
-        self._spi.close()
-        self._lines.release()
-        self._chip.close()
-
-    def _cs_low(self):
-        self._lines.set_value(NSS_PIN, gpiod.line.Value.INACTIVE)
-        time.sleep(0.000005)  # 5µs setup
-
-    def _cs_high(self):
-        self._lines.set_value(NSS_PIN, gpiod.line.Value.ACTIVE)
-        time.sleep(0.000100)  # 100µs post-CS delay
-
-    def _wait_busy(self, timeout_s=1.0):
-        """Wait for BUSY to go HIGH (processing) then LOW (done) — matches Pico firmware."""
-        deadline = time.monotonic() + min(timeout_s, 0.010)
-        # Wait for BUSY HIGH (PN5180 started processing)
-        while self._lines.get_value(BUSY_PIN) != gpiod.line.Value.ACTIVE:
-            if time.monotonic() > deadline:
-                break  # Timeout waiting for HIGH — command may have processed already
-            time.sleep(0.00001)
-        # Wait for BUSY LOW (PN5180 done)
-        deadline = time.monotonic() + timeout_s
-        while self._lines.get_value(BUSY_PIN) == gpiod.line.Value.ACTIVE:
-            if time.monotonic() > deadline:
-                raise TimeoutError("BUSY timeout")
-            time.sleep(0.0001)
-
-    def _cmd(self, data):
-        self._cs_low()
-        self._spi.xfer2(list(data))
-        self._cs_high()
-        self._wait_busy()
-
-    def _read_response(self, n):
-        self._cs_low()
-        result = self._spi.xfer2([0xFF] * n)
-        self._cs_high()
-        return result
-
-    # -- Register ops --
-
-    def write_reg(self, reg, val):
-        self._cmd([0x00, reg, val & 0xFF, (val >> 8) & 0xFF, (val >> 16) & 0xFF, (val >> 24) & 0xFF])
-
-    def write_reg_or(self, reg, mask):
-        self._cmd([0x01, reg, mask & 0xFF, (mask >> 8) & 0xFF, (mask >> 16) & 0xFF, (mask >> 24) & 0xFF])
-
-    def write_reg_and(self, reg, mask):
-        self._cmd([0x02, reg, mask & 0xFF, (mask >> 8) & 0xFF, (mask >> 16) & 0xFF, (mask >> 24) & 0xFF])
-
-    def read_reg(self, reg):
-        self._cmd([0x04, reg])
-        time.sleep(0.000100)  # Extra 100µs before read
-        return int.from_bytes(self._read_response(4), "little")
-
-    def read_eeprom(self, addr, length):
-        self._cmd([0x07, addr, length])
-        time.sleep(0.000100)
-        return bytes(self._read_response(length))
-
-    # -- Commands --
-
-    def reset(self):
-        self._lines.set_value(RST_PIN, gpiod.line.Value.INACTIVE)
-        time.sleep(0.050)
-        self._lines.set_value(RST_PIN, gpiod.line.Value.ACTIVE)
-        time.sleep(0.100)
-        self._wait_busy(2.0)
-        time.sleep(0.050)
-
-    def load_rf_config(self, tx, rx):
-        self.write_reg(0x03, 0xFFFFFFFF)  # Clear IRQs first
-        time.sleep(0.000100)
-        self._cmd([0x11, tx, rx])
-        time.sleep(0.010)
-
-    def rf_on(self):
-        self._cmd([0x16, 0x00])
-        time.sleep(0.010)
-
-    def rf_off(self):
-        self._cmd([0x17, 0x00])
-        time.sleep(0.005)
-
-    def set_transceive_mode(self):
-        """Set SYSTEM_CONFIG command bits to TRANSCEIVE (0x03) — CRITICAL!"""
-        sys_cfg = self.read_reg(0x00)
-        sys_cfg = (sys_cfg & 0xFFFFFFF8) | 0x03
-        self.write_reg(0x00, sys_cfg)
-
-    def send_data(self, data, valid_bits=0x00):
-        self._cs_low()
-        self._spi.xfer2([0x09, valid_bits] + list(data))
-        self._cs_high()
-        time.sleep(0.000100)
-        self._wait_busy()
-
-    def read_data(self, length):
-        self._cmd([0x0A, 0x00])
-        return bytes(self._read_response(length))
-
-    # -- ISO 14443A --
-
-    def activate_type_a(self):
-        """Full Type A activation: WUPA -> Anticollision -> SELECT. Returns (uid, sak) or None."""
-        # Crypto off, CRC off
-        self.write_reg_and(0x00, 0xFFFFFFBF)
-        self.write_reg_and(0x12, 0xFFFFFFFE)
-        self.write_reg_and(0x19, 0xFFFFFFFE)
-        self.write_reg(0x03, 0xFFFFFFFF)
-
-        # Reset to IDLE then TRANSCEIVE
-        sys_cfg = self.read_reg(0x00)
-        self.write_reg(0x00, sys_cfg & 0xFFFFFFF8)  # IDLE
-        time.sleep(0.001)
-        self.write_reg(0x00, (sys_cfg & 0xFFFFFFF8) | 0x03)  # TRANSCEIVE
-        time.sleep(0.002)
-
-        # WUPA (7-bit)
-        self.send_data([0x52], valid_bits=0x07)
-        time.sleep(0.005)
-
-        rx_status = self.read_reg(0x13)
-        rx_len = rx_status & 0x1FF
-        if rx_len < 2 or rx_len == 511:
-            # Try REQA
-            self.write_reg(0x03, 0xFFFFFFFF)
-            time.sleep(0.002)
-            self.set_transceive_mode()
-            time.sleep(0.002)
-            self.send_data([0x26], valid_bits=0x07)
-            time.sleep(0.005)
-            rx_status = self.read_reg(0x13)
-            rx_len = rx_status & 0x1FF
-            if rx_len < 2 or rx_len == 511:
-                return None
-
-        atqa = self.read_data(2)
-        if atqa[0] == 0xFF or atqa[0] == 0x00:
-            return None
-
-        # Anti-collision Level 1
-        self.write_reg(0x03, 0xFFFFFFFF)
-        self.set_transceive_mode()
-        time.sleep(0.002)
-
-        self.send_data([0x93, 0x20])
-        time.sleep(0.010)
-
-        rx_status = self.read_reg(0x13)
-        rx_len = rx_status & 0x1FF
-        if rx_len < 5 or rx_len > 64:
-            return None
-
-        uid_buf = self.read_data(5)
-        uid = uid_buf[:4]
-        bcc = uid[0] ^ uid[1] ^ uid[2] ^ uid[3]
-        if bcc != uid_buf[4]:
-            return None
-
-        # SELECT
-        self.write_reg(0x03, 0xFFFFFFFF)
-        self.set_transceive_mode()
-        time.sleep(0.002)
-
-        # Enable CRC for SELECT
-        self.write_reg_or(0x19, 0x01)
-        self.write_reg_or(0x12, 0x01)
-
-        self.send_data([0x93, 0x70, uid[0], uid[1], uid[2], uid[3], bcc])
-        time.sleep(0.010)
-
-        rx_status = self.read_reg(0x13)
-        rx_len = rx_status & 0x1FF
-        if rx_len < 1:
-            return None
-
-        sak_buf = self.read_data(min(rx_len, 3))
-        sak = sak_buf[0]
-
-        return bytes(uid), sak
-
-    # -- MIFARE Classic --
-
-    def mfc_authenticate(self, block: int, key: bytes, uid: bytes) -> bool:
-        """MIFARE Classic authentication via PN5180 MFC_AUTHENTICATE (0x0C).
-
-        The PN5180 handles Crypto1 internally. After success, bit 6 of
-        SYSTEM_CONFIG is set (MFC_CRYPTO1_ON) and all subsequent RF
-        communication is encrypted/decrypted by the hardware.
-
-        Args:
-            block: Block number to authenticate
-            key: 6-byte MIFARE Key A
-            uid: 4-byte tag UID
-        Returns:
-            True if authentication succeeded
-        """
-        # Wait for BUSY LOW before starting
-        deadline = time.monotonic() + 0.100
-        while self._lines.get_value(BUSY_PIN) == gpiod.line.Value.ACTIVE:
-            if time.monotonic() > deadline:
-                return False
-            time.sleep(0.001)
-
-        # MFC_AUTHENTICATE: [0x0C][key 6B][keyType][blockNo][uid 4B] = 13 bytes
-        cmd = [0x0C] + list(key) + [0x60, block] + list(uid[:4])
-        self._cs_low()
-        self._spi.xfer2(cmd)
-        self._cs_high()
-
-        # Wait for BUSY HIGH then LOW (auth can take up to 1s)
-        self._wait_busy(timeout_s=1.0)
-
-        # Read 1-byte response: 0x00 = success
-        self._cs_low()
-        response = self._spi.xfer2([0xFF])
-        self._cs_high()
-
-        return response[0] == 0x00
-
-    def mfc_read_block(self, block: int) -> bytes | None:
-        """Read a 16-byte MIFARE Classic block (must be authenticated first).
-
-        Returns 16 bytes of block data, or None on failure.
-        """
-        # Clear IRQs
-        self.write_reg(0x03, 0xFFFFFFFF)
-
-        # Set transceive mode (Crypto1 stays active from MFC_AUTHENTICATE)
-        self.set_transceive_mode()
-        time.sleep(0.001)
-
-        # Enable TX and RX CRC for encrypted read
-        self.write_reg_or(0x19, 0x01)
-        self.write_reg_or(0x12, 0x01)
-
-        # Send MIFARE READ command: 0x30 + block number
-        self.send_data([0x30, block])
-        time.sleep(0.010)
-
-        # Check RX status
-        rx_status = self.read_reg(0x13)
-        rx_len = rx_status & 0x1FF
-        if rx_len != 16:
-            return None
-
-        return self.read_data(16)
-
-    def ntag_read_pages(self, start_page: int, num_pages: int) -> bytes | None:
-        """Read NTAG pages (4 bytes each). No authentication required.
-
-        Uses NTAG READ command (0x30) which returns 4 pages (16 bytes) at a time.
-        CRC must be disabled for NTAG reads.
-        """
-        # Disable CRC for NTAG
-        self.write_reg_and(0x19, 0xFFFFFFFE)  # TX CRC off
-        self.write_reg_and(0x12, 0xFFFFFFFE)  # RX CRC off
-
-        result = bytearray()
-        pages_read = 0
-        while pages_read < num_pages:
-            self.write_reg(0x03, 0xFFFFFFFF)  # Clear IRQs
-            self.set_transceive_mode()
-            time.sleep(0.001)
-
-            # READ command: 0x30 + page number → returns 16 bytes (4 pages)
-            self.send_data([0x30, start_page + pages_read])
-            time.sleep(0.005)
-
-            rx_status = self.read_reg(0x13)
-            rx_len = rx_status & 0x1FF
-            if rx_len < 16:
-                return None
-
-            data = self.read_data(16)
-            # Copy only the pages we need
-            pages_to_copy = min(4, num_pages - pages_read)
-            result.extend(data[: pages_to_copy * 4])
-            pages_read += 4  # Always advances by 4 (READ returns 4 pages)
-
-        return bytes(result)
-
-    def reactivate_card(self) -> tuple[bytes, int] | None:
-        """RF cycle and full re-select of the card. Returns (uid, sak) or None."""
-        self.rf_off()
-        time.sleep(0.010)
-
-        self.write_reg(0x03, 0xFFFFFFFF)  # Clear IRQs
-        self.load_rf_config(0x00, 0x80)  # ISO 14443A
-        time.sleep(0.005)
-
-        self.rf_on()
-        time.sleep(0.020)
-
-        return self.activate_type_a()
-
-    def read_bambu_tag(self, uid: bytes) -> dict[int, bytes] | None:
-        """Read Bambu tag data blocks using HKDF-derived keys.
-
-        Args:
-            uid: 4-byte tag UID (from activate_type_a)
-        Returns:
-            Dict mapping block number -> 16 bytes of data, or None on failure
-        """
-        # Derive per-sector keys from UID
-        keys = hkdf_derive_keys(uid)
-
-        # Clear Crypto1 state and IRQs
-        self.write_reg_and(0x00, 0xFFFFFFBF)  # Clear MFC_CRYPTO1_ON (bit 6)
-        self.write_reg(0x03, 0xFFFFFFFF)
-
-        # Reactivate card (may have timed out)
-        result = self.reactivate_card()
-        if result is None:
-            print("    Failed to reactivate card")
-            return None
-
-        uid_check, _ = result
-        if uid_check != uid:
-            print(f"    UID mismatch after reactivation: {uid_check.hex()} != {uid.hex()}")
-            return None
-
-        # Read blocks with per-sector authentication
-        blocks = {}
-        current_sector = -1
-
-        for block in BAMBU_BLOCKS:
-            sector = block // 4
-
-            # Authenticate when entering a new sector
-            if sector != current_sector:
-                key = get_sector_key(keys, block)
-                if not self.mfc_authenticate(block, key, uid):
-                    print(f"    Auth failed for block {block} (sector {sector})")
-                    return None
-                current_sector = sector
-
-            # Read the block
-            data = self.mfc_read_block(block)
-            if data is None:
-                print(f"    Read failed for block {block}")
-                return None
-            blocks[block] = data
-
-        return blocks
-
-    def ntag_write_page(self, page: int, data: bytes) -> bool:
-        """Write 4 bytes to a single NTAG page.
-
-        NTAG WRITE command: 0xA2 + page_number + 4 bytes data.
-        CRC disabled (same as reads). Returns True on ACK (0x0A).
-        """
-        if len(data) != 4:
-            return False
-
-        # Disable CRC
-        self.write_reg_and(0x19, 0xFFFFFFFE)  # TX CRC off
-        self.write_reg_and(0x12, 0xFFFFFFFE)  # RX CRC off
-
-        # Clear IRQs and set transceive mode
-        self.write_reg(0x03, 0xFFFFFFFF)
-        self.set_transceive_mode()
-        time.sleep(0.001)
-
-        # WRITE command: 0xA2 + page + 4 bytes
-        self.send_data([0xA2, page] + list(data))
-        time.sleep(0.005)
-
-        # Check for ACK: NTAG ACK is 4-bit 0x0A
-        rx_status = self.read_reg(0x13)
-        rx_len = rx_status & 0x1FF
-        if rx_len < 1:
-            return False
-
-        ack = self.read_data(1)
-        return ack[0] == 0x0A
-
-    def ntag_write_pages(self, start_page: int, data: bytes) -> bool:
-        """Write data to consecutive NTAG pages starting at start_page.
-
-        Pads last chunk to 4 bytes. Verifies by reading back.
-        Returns True if write + verify succeeded.
-        """
-        # Pad to 4-byte boundary
-        padded = bytearray(data)
-        while len(padded) % 4 != 0:
-            padded.append(0x00)
-
-        # Write page by page
-        for i in range(0, len(padded), 4):
-            page = start_page + (i // 4)
-            chunk = bytes(padded[i : i + 4])
-            if not self.ntag_write_page(page, chunk):
-                return False
-            time.sleep(0.002)
-
-        # Reactivate card for verification read
-        result = self.reactivate_card()
-        if result is None:
-            return False
-
-        # Read back and verify
-        num_pages = len(padded) // 4
-        readback = self.ntag_read_pages(start_page, num_pages)
-        if readback is None:
-            return False
-
-        return readback[: len(data)] == data
-
-    def read_ntag(self, uid: bytes) -> bytes | None:
-        """Read NTAG pages 4-20 (NDEF data area, 68 bytes). No auth needed.
-
-        Used for SpoolEase / OpenPrintTag community tags.
-        """
-        # Reactivate card
-        result = self.reactivate_card()
-        if result is None:
-            print("    Failed to reactivate card")
-            return None
-
-        return self.ntag_read_pages(start_page=4, num_pages=17)
+# Add daemon package to sys.path so we can import the driver
+sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
+from daemon.pn5180 import BAMBU_BLOCKS, PN5180
 
 
 def _print_hex_dump(data: bytes, label: str, bytes_per_line: int = 16):
@@ -583,7 +52,7 @@ def main():
         else:
             print("\nCheck:")
             print("  - Correct GPIO chip is available (/dev/gpiochip0 or /dev/gpiochip4)")
-            print(f"  - SPI device is available (SPI_BUS={SPI_BUS}, SPI_DEVICE={SPI_DEVICE})")
+            print("  - SPI device is available")
             print("  - GPIO and SPI permissions are correct")
             # Only print full traceback for unexpected errors
             import traceback

spoolbuddy/scripts/scale_diag.py

@@ -1,152 +1,19 @@
 #!/usr/bin/env python3
-"""NAU7802 Scale Diagnostic - ported from SpoolBuddy Rust firmware.
+"""NAU7802 Scale Diagnostic.
 
-I2C address: 0x2A
-Bus: /dev/i2c-1 (GPIO2/GPIO3 on RPi)
+Standalone diagnostic script — the NAU7802 driver lives in
+spoolbuddy/daemon/nau7802.py and is imported from there.
 """
 
-import os
-import struct
 import sys
 import time
+from pathlib import Path
 
 import smbus2
 
-
-def _env_int(name: str, default: int) -> int:
-    value = os.environ.get(name)
-    if value is None or value == "":
-        return default
-    try:
-        return int(value)
-    except ValueError:
-        return default
-
-
-I2C_BUS = _env_int("SPOOLBUDDY_I2C_BUS", 1)
-NAU7802_ADDR = 0x2A
-
-# Register addresses
-REG_PU_CTRL = 0x00
-REG_CTRL1 = 0x01
-REG_CTRL2 = 0x02
-REG_ADCO_B2 = 0x12  # ADC output MSB
-REG_ADCO_B1 = 0x13
-REG_ADCO_B0 = 0x14  # ADC output LSB
-REG_ADC = 0x15
-REG_PGA = 0x1B
-REG_PWR_CTRL = 0x1C
-REG_REVISION = 0x1F
-
-# PU_CTRL bits
-PU_RR = 0x01  # Register reset
-PU_PUD = 0x02  # Power up digital
-PU_PUA = 0x04  # Power up analog
-PU_PUR = 0x08  # Power up ready (read-only)
-PU_CS = 0x10  # Cycle start
-PU_CR = 0x20  # Cycle ready (read-only)
-PU_OSCS = 0x40  # Oscillator select
-PU_AVDDS = 0x80  # AVDD source select
-
-
-class NAU7802:
-    def __init__(self, bus=I2C_BUS, addr=NAU7802_ADDR):
-        self._bus_num = bus
-        self._bus = smbus2.SMBus(bus)
-        self._addr = addr
-
-    def close(self):
-        self._bus.close()
-
-    def read_reg(self, reg: int) -> int:
-        return self._bus.read_byte_data(self._addr, reg)
-
-    def write_reg(self, reg: int, val: int):
-        self._bus.write_byte_data(self._addr, reg, val & 0xFF)
-
-    def _update_bits(self, reg: int, mask: int, value: int):
-        cur = self.read_reg(reg)
-        self.write_reg(reg, (cur & ~mask) | (value & mask))
-
-    def _set_bit(self, reg: int, bit: int, enabled: bool):
-        mask = 1 << bit
-        self._update_bits(reg, mask, mask if enabled else 0)
-
-    def _set_field(self, reg: int, shift: int, width: int, value: int):
-        mask = ((1 << width) - 1) << shift
-        self._update_bits(reg, mask, value << shift)
-
-    def init(self):
-        """Initialize NAU7802 using the Adafruit library startup sequence."""
-
-        # Reset
-        self._set_bit(REG_PU_CTRL, 0, True)  # RR=1
-        time.sleep(0.010)
-        self._set_bit(REG_PU_CTRL, 0, False)  # RR=0
-        self._set_bit(REG_PU_CTRL, 1, True)  # PUD=1
-        time.sleep(0.001)
-
-        # Enable digital + analog and allow analog section to settle.
-        self._set_bit(REG_PU_CTRL, 1, True)  # PUD=1
-        self._set_bit(REG_PU_CTRL, 2, True)  # PUA=1
-        time.sleep(0.600)
-
-        # Start conversion cycle (PU_CS bit 4) after power-up.
-        self._set_bit(REG_PU_CTRL, 4, True)
-
-        # Wait for power-up ready (PU_PUR bit 3)
-        for _ in range(100):
-            status = self.read_reg(REG_PU_CTRL)
-            if status & PU_PUR:
-                print("  Power-up ready")
-                break
-            time.sleep(0.001)
-        else:
-            raise TimeoutError("NAU7802 power-up timeout")
-
-        # Check revision register low nibble (Adafruit expects 0xF).
-        revision = self.read_reg(REG_REVISION)
-        print(f"  Revision: 0x{revision:02X}")
-        if (revision & 0x0F) != 0x0F:
-            raise RuntimeError(f"Unexpected NAU7802 revision register: 0x{revision:02X}")
-
-        # Internal LDO enable is PU_CTRL.AVDDS (bit 7); set LDO voltage to 3.0V.
-        self._set_bit(REG_PU_CTRL, 7, True)  # AVDDS=1 (internal LDO)
-        self._set_field(REG_CTRL1, shift=3, width=3, value=0b101)  # VLDO=3.0V
-        print("  LDO: 3.0V (internal)")
-
-        # Gain: 128x (bits 2:0 of CTRL1 = 0b111)
-        self._set_field(REG_CTRL1, shift=0, width=3, value=0b111)
-        print("  Gain: 128x")
-
-        # Sample rate: 10 SPS (CTRL2 bits 6:4 = 0b000)
-        self._set_field(REG_CTRL2, shift=4, width=3, value=0b000)
-        print("  Sample rate: 10 SPS")
-
-        # Adafruit tuning: disable ADC chopper clock (ADC bits 5:4 = 0b11)
-        self._set_field(REG_ADC, shift=4, width=2, value=0b11)
-
-        # Adafruit tuning: use low ESR caps (PGA bit 6 = 0)
-        self._set_bit(REG_PGA, 6, False)
-
-        # Start conversion cycle
-        self._set_bit(REG_PU_CTRL, 4, True)
-        print("  Conversion started")
-
-    def data_ready(self) -> bool:
-        return bool(self.read_reg(REG_PU_CTRL) & PU_CR)
-
-    def read_raw(self) -> int:
-        """Read 24-bit signed ADC value."""
-        b2 = self.read_reg(REG_ADCO_B2)
-        b1 = self.read_reg(REG_ADCO_B1)
-        b0 = self.read_reg(REG_ADCO_B0)
-        raw = (b2 << 16) | (b1 << 8) | b0
-        # Sign extend 24-bit to 32-bit
-        if raw & 0x800000:
-            raw |= 0xFF000000
-            raw = struct.unpack("i", struct.pack("I", raw))[0]
-        return raw
+# Add daemon package to sys.path so we can import the driver
+sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
+from daemon.nau7802 import I2C_BUS, NAU7802, NAU7802_ADDR
 
 
 def main():
@@ -191,6 +58,7 @@ def main():
     try:
         print("[1] Initializing...")
         scale.init()
+        print("  Initialized OK")
 
         print("[2] Waiting for first reading...")
         for _ in range(200):