diff --git a/.gitignore b/.gitignore
index 522d66e1..a8c71744 100644
--- a/.gitignore
+++ b/.gitignore
@@ -2,6 +2,10 @@
 /unifi-poller
 /*.gz
 /*.1
+/*.deb
+/*.rpm
+/*.pkg
 /vendor
 .DS_Store
 *~
+/package_build
diff --git a/Makefile b/Makefile
index d4fffac1..595d9e59 100644
--- a/Makefile
+++ b/Makefile
@@ -5,6 +5,7 @@ all: clean man build
 
 clean:
 	for p in $(PACKAGES); do rm -f `echo $${p}|cut -d/ -f3`{,.1,.1.gz}; done
+	rm -rf package_build unifi-poller_*.deb unifi-poller-*.rpm unifi-poller-*.pkg
 
 build:
 	for p in $(PACKAGES); do go build -ldflags "-w -s" $${p}; done
@@ -12,41 +13,30 @@ build:
 linux:
 	for p in $(PACKAGES); do GOOS=linux go build -ldflags "-w -s" $${p}; done
 
-install: man test build
-	@echo "If you get errors, you may need sudo."
-	# Install binary. binary.
-	GOBIN=/usr/local/bin go install -ldflags "-w -s" ./...
-	# Making config folders and installing man page.
-	mkdir -p /usr/local/etc/$(BINARY) /usr/local/share/man/man1
-	mv *.1.gz /usr/local/share/man/man1
-	# Installing config file, man page and launch agent or systemd unit file.
-	test -f /usr/local/etc/$(BINARY)/up.conf || cp up.conf.example /usr/local/etc/$(BINARY)/up.conf
-	test -d ~/Library/LaunchAgents && cp startup/launchd/com.github.davidnewhall.$(BINARY).plist ~/Library/LaunchAgents || true
-	test -d /etc/systemd/system && cp startup/systemd/$(BINARY).service /etc/systemd/system || true
-	# Making systemd happy by telling it to reload.
-	test -x /bin/systemctl && /bin/systemctl --system daemon-reload || true
-	@echo
-	@echo "Installation Complete. Edit the config file @ /usr/local/etc/$(BINARY)/up.conf "
-	@echo "Then start the daemon with:"
-	@test -d ~/Library/LaunchAgents && echo "   launchctl load ~/Library/LaunchAgents/com.github.davidnewhall.$(BINARY).plist" || true
-	@test -d /etc/systemd/system && echo "   sudo /bin/systemctl start $(BINARY)" || true
-	@echo "Examine the log file at: /usr/local/var/log/$(BINARY).log (logs may go elsewhere on linux, check syslog)"
-
-uninstall:
-	@echo "If you get errors, you may need sudo."
-	# Stopping the daemon
-	test -x /bin/systemctl && /bin/systemctl stop $(BINARY) || true
-	test -x /bin/launchctl && /bin/launchctl unload ~/Library/LaunchAgents/com.github.davidnewhall.$(BINARY).plist || true
-	# Deleting config file, binary, man page, launch agent or unit file.
-	rm -rf /usr/local/{etc,bin}/$(BINARY) /usr/local/share/man/man1/$(BINARY).1.gz
-	rm -f ~/Library/LaunchAgents/com.github.davidnewhall.$(BINARY).plist
-	rm -f /etc/systemd/system/$(BINARY).service
-	# Making systemd happy by telling it to reload.
-	test -x /bin/systemctl && /bin/systemctl --system daemon-reload || true
+darwin:
+	for p in $(PACKAGES); do GOOS=darwin go build -ldflags "-w -s" $${p}; done
 
 test: lint
 	for p in $(PACKAGES) $(LIBRARYS); do go test -race -covermode=atomic $${p}; done
 
+man:
+	scripts/build_manpages.sh ./
+
+rpm: clean man linux
+	scripts/build_linux_packages.sh rpm
+
+deb: clean man linux
+	scripts/build_linux_packages.sh deb
+
+osxpkg: clean man darwin
+	scripts/build_osx_package.sh
+
+install: all
+	scripts/local_install.sh
+
+uninstall:
+	scripts/local_uninstall.sh
+
 lint:
 	goimports -l $(PACKAGES)
 	gofmt -l $(PACKAGES)
@@ -54,8 +44,5 @@ lint:
 	golint $(PACKAGES)
 	go vet $(PACKAGES)
 
-man:
-	script/build_manpages.sh ./
-
 deps:
 	dep ensure -update
diff --git a/README.md b/README.md
index 6621065c..6d5204b4 100644
--- a/README.md
+++ b/README.md
@@ -43,13 +43,6 @@ I only, personally, run this on a Mac 10.13.something. I know others are using
 Linux and it's working, but I need more feedback. Does the unit file work? Are
 you able to stop and start the service? Does the Makefile do the right things?
 
-- I probably suck at InfluxDB.
-
-I don't know what should be a tag and what should be a field. I think
-I did my best, but there's certainly room for improvements in both
-the data input and the Grafana graphs (output). I'm always iterating, but
-if you find a deficiency or something that can be improved, let me know.
-
 - Are there other devices that need to be included?
 
 I have: switch, router, access point. Three total, and the type structs are
@@ -64,11 +57,6 @@ Issue and lets discuss.
 If you're a nerd you can probably figure it out. I'd still like some pretty
 pictures and maybe even a Twitch VOD.
 
-- Sanity Checking
-
-Did I actually graph the right data in the right way? Some validation would
-be nice.
-
 - Radios, Frequencies, Interfaces, vAPs
 
 My access points only seem to have two radios, one interface and vAP per radio.
@@ -84,12 +72,12 @@ isolate why this happens. We may need to issue a reconnect and get a new cookie.
 
 Here's a picture of the Client dashboard.
 
-![image](images/unifi-clients-dashboard.png?raw=true)
+![image](examples/unifi-clients-dashboard.png?raw=true)
 
 Here's a picture of the UAP dashboard. This only shows one device, but you can
 select multiple to put specific stats side-by-side.
 
-![image](images/unifi-uap-dashboard.png?raw=true)
+![image](examples/unifi-uap-dashboard.png?raw=true)
 
 
 ## Copyright & License
diff --git a/examples/README.md b/examples/README.md
new file mode 100644
index 00000000..6a66a486
--- /dev/null
+++ b/examples/README.md
@@ -0,0 +1,8 @@
+# Grafana Dashboards & Examples
+
+This folder contains grafana dashboards to get you started with the new data pool.
+Import these into Grafana to quickly visualize data from your devices.
+
+They may/do use a few plugins: Clock, Discrete, Singlestat, Table
+
+This folder also contains an example configuration file and some dashboard screenshots.
diff --git a/images/unifi-clients-dashboard.png b/examples/unifi-clients-dashboard.png
similarity index 100%
rename from images/unifi-clients-dashboard.png
rename to examples/unifi-clients-dashboard.png
diff --git a/grafana-dashboards/unifi-clients-grafana-dash.json b/examples/unifi-clients-grafana-dash.json
similarity index 100%
rename from grafana-dashboards/unifi-clients-grafana-dash.json
rename to examples/unifi-clients-grafana-dash.json
diff --git a/images/unifi-uap-dashboard.png b/examples/unifi-uap-dashboard.png
similarity index 100%
rename from images/unifi-uap-dashboard.png
rename to examples/unifi-uap-dashboard.png
diff --git a/grafana-dashboards/unifi-uap-grafana-dash.json b/examples/unifi-uap-grafana-dash.json
similarity index 100%
rename from grafana-dashboards/unifi-uap-grafana-dash.json
rename to examples/unifi-uap-grafana-dash.json
diff --git a/grafana-dashboards/unifi-usg-grafana-dash.json b/examples/unifi-usg-grafana-dash.json
similarity index 100%
rename from grafana-dashboards/unifi-usg-grafana-dash.json
rename to examples/unifi-usg-grafana-dash.json
diff --git a/up.conf.example b/examples/up.conf.example
similarity index 100%
rename from up.conf.example
rename to examples/up.conf.example
diff --git a/grafana-dashboards/README.md b/grafana-dashboards/README.md
deleted file mode 100644
index 565178b7..00000000
--- a/grafana-dashboards/README.md
+++ /dev/null
@@ -1,5 +0,0 @@
-# Grafana Dashboards
-
-Import these into Grafana to quickly visualize data from your devices.
-
-They may/do use a few plugins: Clock, Discrete, Singlestat, Table
diff --git a/startup/launchd/com.github.davidnewhall.unifi-poller.plist b/init/launchd/com.github.davidnewhall.unifi-poller.plist
similarity index 100%
rename from startup/launchd/com.github.davidnewhall.unifi-poller.plist
rename to init/launchd/com.github.davidnewhall.unifi-poller.plist
diff --git a/startup/systemd/unifi-poller.service b/init/systemd/unifi-poller.service
similarity index 91%
rename from startup/systemd/unifi-poller.service
rename to init/systemd/unifi-poller.service
index 4576bae8..ba7d1bd7 100644
--- a/startup/systemd/unifi-poller.service
+++ b/init/systemd/unifi-poller.service
@@ -1,4 +1,3 @@
-# untested, feedback welcomed.
 [Unit]
 Description=Unifi Poller - Ubiquiti Metrics->InfluxDB
 After=network.target
diff --git a/scripts/after-install-osx.sh b/scripts/after-install-osx.sh
new file mode 100755
index 00000000..bc2ad33c
--- /dev/null
+++ b/scripts/after-install-osx.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+# This file is used by osxpkg packages.  FPM use.
+
+# Copy the config file into place if it does not exist.
+if [ ! -f /usr/local/etc/unifi-poller/up.conf ] && [ -f /usr/local/etc/unifi-poller/up.conf.example ]; then
+  cp /usr/local/etc/unifi-poller/up.conf.example /usr/local/etc/unifi-poller/up.conf
+fi
+
+# Allow admins to change the configuration and write logs.
+chgrp -R admin /usr/local/etc/unifi-poller
+chmod -R g+wr /usr/local/etc/unifi-poller
+
+# Make sure admins can write logs.
+chgrp admin /usr/local/var/log
+chmod g=rwx /usr/local/var/log
+
+# This starts it as root. no no no .... not sure how to fix that.
+# launchctl load /Library/LaunchAgents/com.github.davidnewhall.unifi-poller.plist
diff --git a/scripts/after-install.sh b/scripts/after-install.sh
new file mode 100755
index 00000000..2fb3cd87
--- /dev/null
+++ b/scripts/after-install.sh
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# This file is used by rpm and deb packages.  FPM use.
+
+systemctl daemon-reload
+systemctl enable unifi-poller
+systemctl restart unifi-poller
diff --git a/scripts/before-remove.sh b/scripts/before-remove.sh
new file mode 100755
index 00000000..a1d4895e
--- /dev/null
+++ b/scripts/before-remove.sh
@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# This file is used by rpm and deb packages. FPM use.
+
+systemctl stop unifi-poller
+systemctl disable unifi-poller
diff --git a/scripts/build_linux_packages.sh b/scripts/build_linux_packages.sh
new file mode 100755
index 00000000..b579609c
--- /dev/null
+++ b/scripts/build_linux_packages.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+
+# This script builds a deb or rpm package. Run by the Makefile.
+# Use: `make rpm` or `make deb`
+
+OUTPUT=$1
+BINARY=unifi-poller
+VERSION=$(git tag -l --merged | tail -n1 | tr -d v)
+
+if [ "$OUTPUT" != "deb" ] && [ "$OUTPUT" != "rpm" ]; then
+  echo "first argument must be 'deb' or 'rpm'"
+  exit 1
+fi
+
+fpm -h > /dev/null 2>&1
+if [ "$?" != "0" ]; then
+  echo "fpm missing. Install fpm: https://fpm.readthedocs.io/en/latest/installing.html"
+  exit 1
+fi
+
+echo "Building '${OUTPUT}' package."
+
+PREFIX=
+BINFIX=/usr
+
+# Make a build environment.
+rm -rf package_build
+mkdir -p package_build${BINFIX}/bin package_build${PREFIX}/etc/${BINARY} package_build${BINFIX}/share/man/man1
+
+# Copy the binary, config file and man page into the env.
+cp ${BINARY} package_build${BINFIX}/bin
+cp *.1.gz package_build${BINFIX}/share/man/man1
+cp examples/up.conf.example package_build${PREFIX}/etc/${BINARY}/up.conf
+
+# Fix the paths in the systemd unit file before copying it into the emv.
+mkdir -p package_build/lib/systemd/system
+sed "s#ExecStart.*#ExecStart=${BINFIX}/bin/${BINARY} --config=${PREFIX}/etc/${BINARY}/up.conf#" \
+  init/systemd/unifi-poller.service > package_build/lib/systemd/system/${BINARY}.service
+
+fpm -s dir -t ${OUTPUT} \
+  --name ${BINARY} \
+  --version ${VERSION} \
+  --after-install scripts/after-install.sh \
+  --before-remove scripts/before-remove.sh \
+  --chdir package_build
diff --git a/script/build_manpages.sh b/scripts/build_manpages.sh
similarity index 88%
rename from script/build_manpages.sh
rename to scripts/build_manpages.sh
index 19493dd9..cf223e1b 100755
--- a/script/build_manpages.sh
+++ b/scripts/build_manpages.sh
@@ -1,5 +1,6 @@
 #!/bin/bash
 
+# This file uses ronn to build a man page for unifi-poller.
 set -o pipefail
 
 OUTPUT=$1
diff --git a/scripts/build_osx_package.sh b/scripts/build_osx_package.sh
new file mode 100755
index 00000000..a0af56f9
--- /dev/null
+++ b/scripts/build_osx_package.sh
@@ -0,0 +1,41 @@
+#!/bin/bash
+
+# This script builds a simple macos Installer pkg. Run by the Makefile.
+# Use: `make osx`
+
+OUTPUT=$1
+BINARY=unifi-poller
+VERSION=$(git tag -l --merged | tail -n1 | tr -d v)
+
+fpm -h > /dev/null 2>&1
+if [ "$?" != "0" ]; then
+  echo "fpm missing. Install fpm: https://fpm.readthedocs.io/en/latest/installing.html"
+  exit 1
+fi
+
+echo "Building 'osxpkg' package."
+
+PREFIX=/usr/local
+BINFIX=/usr/local
+
+# Make a build environment.
+rm -rf package_build
+mkdir -p package_build${BINFIX}/bin package_build${PREFIX}/etc/${BINARY} package_build${BINFIX}/share/man/man1
+mkdir -p package_build${PREFIX}/var/log
+
+# Copy the binary, config file and man page into the env.
+cp ${BINARY} package_build${BINFIX}/bin
+cp *.1.gz package_build${BINFIX}/share/man/man1
+cp examples/up.conf.example package_build${PREFIX}/etc/${BINARY}/
+
+# Copy in launch agent.
+mkdir -p package_build/Library/LaunchAgents
+cp init/launchd/com.github.davidnewhall.unifi-poller.plist package_build/Library/LaunchAgents/
+
+# Make a package.
+fpm -s dir -t osxpkg \
+  --name ${BINARY} \
+  --version ${VERSION} \
+  --after-install scripts/after-install-osx.sh \
+  --osxpkg-identifier-prefix com.github.davidnewhall \
+  --chdir package_build
diff --git a/scripts/local_install.sh b/scripts/local_install.sh
new file mode 100755
index 00000000..74a082b0
--- /dev/null
+++ b/scripts/local_install.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+
+# This script creates a local installation of unifi-poller.
+# Recommend using Makefile to invoke: make install
+# Supports Linux (systemd only) and macOS.
+
+BINARY=unifi-poller
+
+echo "Installing unifi-poller. If you get errors, you may need sudo."
+
+# Install binary.
+GOBIN=/usr/local/bin go install -ldflags "-w -s" ./...
+
+# Making config folders and installing man page.
+mkdir -p /usr/local/etc/${BINARY} /usr/local/share/man/man1
+mv *.1.gz /usr/local/share/man/man1
+
+# Installing config file, man page and launch agent or systemd unit file.
+if [ ! -f /usr/local/etc/${BINARY}/up.conf ]; then
+  cp examples/up.conf.example /usr/local/etc/${BINARY}/up.conf
+fi
+if [ -d ~/Library/LaunchAgents ]; then
+  cp init/launchd/com.github.davidnewhall.${BINARY}.plist ~/Library/LaunchAgents
+fi
+if [ -d /etc/systemd/system ]; then
+  cp init/systemd/${BINARY}.service /etc/systemd/system
+fi
+
+# Making systemd happy by telling it to reload.
+if [ -x /bin/systemctl ]; then
+  /bin/systemctl --system daemon-reload
+  /bin/systemctl start unifi-poller
+  /bin/systemctl enable unifi-poller
+fi
+
+echo "Installation Complete. Edit the config file @ /usr/local/etc/${BINARY}/up.conf"
+echo "Then start the daemon with:"
+if [ -d ~/Library/LaunchAgents ]; then
+  echo "   launchctl load ~/Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist"
+fi
+if [ -x /bin/systemctl ]; then
+  echo "   sudo /bin/systemctl restart ${BINARY}"
+fi
+echo "Examine the log file at: /usr/local/var/log/${BINARY}.log (logs may go elsewhere on linux, check syslog)"
diff --git a/scripts/local_uninstall.sh b/scripts/local_uninstall.sh
new file mode 100755
index 00000000..fd5abce8
--- /dev/null
+++ b/scripts/local_uninstall.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+
+# This script removes a local installation of unifi-poller.
+# Recommend using Makefile to invoke: make uninstall
+# Supports Linux (systemd only) and macOS.
+
+BINARY=unifi-poller
+
+echo "Uninstall unifi-poller. You may need sudo on Linux. Do not use sudo on macOS."
+
+# Stopping the daemon
+if [ -x /bin/systemctl ]; then
+  /bin/systemctl disable ${BINARY}
+  /bin/systemctl stop ${BINARY}
+fi
+
+if [ -x /bin/launchctl ] && [ -f ~/Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist ]; then
+  echo Unloading ~/Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist
+  /bin/launchctl unload ~/Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist || true
+fi
+
+if [ -x /bin/launchctl ] && [ -f /Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist ]; then
+  echo Unloading /Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist
+  /bin/launchctl unload /Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist || true
+  echo "Delete this file manually: sudo rm -f /Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist"
+fi
+
+# Deleting config file, binary, man page, launch agent or unit file.
+rm -rf /usr/local/{etc,bin}/${BINARY} /usr/local/share/man/man1/${BINARY}.1.gz
+rm -f ~/Library/LaunchAgents/com.github.davidnewhall.${BINARY}.plist
+rm -f /etc/systemd/system/${BINARY}.service
+
+# Making systemd happy by telling it to reload.
+if [ -x /bin/systemctl ]; then
+  /bin/systemctl --system daemon-reload
+fi