* Add support for pg17
* use new gcov2lcov-action
* Use ghcr spilo-17
* Update SPILO_CURRENT and SPILO_LAZY
* Update e2e/run.sh
---------
Co-authored-by: Polina Bungina <27892524+hughcapet@users.noreply.github.com>
* add the pg version 16
* add comma after pg16 in crds api
* change minimal_major_version to 12
* add new spilo image for pg16
* edit the registry from current and lazy spilo
* Update e2e/run.sh
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* Update README.md
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* add pg 11 to be compatible for the existing DBs
* update pq, pyyaml,k8s and kind version
* skip test_infrastructure_roles
* skip another test
* remove the skipping
* adjust the verification of new Patroni version states
---------
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* allow empty resources when defaults are empty
* update codegen
* add more unit tests and remove internal resources defaults
* a unit test for min limit and raising to request
* uncomment defaults in example configmap
* simplifying pooler pod generation unit test
In Go, when a struct field is not set, it becomes a struct with
default values for all fields. These default values are included
during serialization. This causes issues with schema validation
where optional fields cannot be omitted because default values
are considered invalid.
This patch addresses this issue for `Resources` fields on several
types by using a pointer value.
* change Clone attribute of PostgresSpec to *ConnectionPooler
* update go.mod from master
* fix TestConnectionPoolerSynchronization()
* Update pkg/apis/acid.zalan.do/v1/postgresql_type.go
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
Co-authored-by: Pavlo Golub <pavlo.golub@gmail.com>
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
The [operator parameters][1] already support the
`custom_service_annotations` config.With this parameter is possible to
define custom annotations that will be used on the services created by the
operator. The `custom_service_annotations` as all the other
[operator parameters][1] are defined on the operator level and do not allow
customization on the cluster level. A cluster may require different service
annotations, as for example, set up different cloud load balancers
timeouts, different ingress annotations, and/or enable more customizable
environments.
This commit introduces a new parameter on the cluster level, called
`serviceAnnotations`, responsible for defining custom annotations just for
the services created by the operator to the specifically defined cluster.
It allows a mix of configuration between `custom_service_annotations` and
`serviceAnnotations` where the latest one will have priority. In order to
allow custom service annotations to be used on services without
LoadBalancers (as for example, service mesh services annotations) both
`custom_service_annotations` and `serviceAnnotations` are applied
independently of load-balancing configuration. For retro-compatibility
purposes, `custom_service_annotations` is still under
[Load balancer related options][2]. The two default annotations when using
LoadBalancer services, `external-dns.alpha.kubernetes.io/hostname` and
`service.beta.kubernetes.io/aws-load-balancer-connection-idle-timeout` are
still defined by the operator.
`service.beta.kubernetes.io/aws-load-balancer-connection-idle-timeout` can
be overridden by `custom_service_annotations` or `serviceAnnotations`,
allowing a more customizable environment.
`external-dns.alpha.kubernetes.io/hostname` can not be overridden once
there is no differentiation between custom service annotations for
replicas and masters.
It updates the documentation and creates the necessary unit and e2e
tests to the above-described feature too.
[1]: https://github.com/zalando/postgres-operator/blob/master/docs/reference/operator_parameters.md
[2]: https://github.com/zalando/postgres-operator/blob/master/docs/reference/operator_parameters.md#load-balancer-related-options
* Change error computation on JSON Unmarshall
The [Unmarshall function][1] on the encoding/JSON default library returns
different errors for different go versions. On Go 1.12, the version used
currently on the CI system it returns `json: cannot unmarshal number into
Go struct field PostgresSpec.teamId of type string`. On Go 1.13.5 it
returns `json: cannot unmarshal number into Go struct field
PostgresSpec.spec.teamId of type string`. The new version includes more
details of the whole structure being unmarshelled.
This commit introduces the same error but one level deeper on the JSON
structure. It creates consistency across different Go versions.
[1]: https://godoc.org/encoding/json#Unmarshal
* Create subtests on table test scenarios
The Run method of T allows defining subtests creating hierarchical tests.
It provides better visibility of tests in case of failure. More
details on https://golang.org/pkg/testing/.
This commit converts each test scenario on
pkg/apis/acid.zalan.do/v1/util_test.go to subtests, providing a better
visibility and the debugging environment when working with tests. The
following code snippet shows an error during test execution with
subtests:
```
--- FAIL: TestUnmarshalMaintenanceWindow (0.00s)
--- FAIL: TestUnmarshalMaintenanceWindow/expect_error_as_'From'_is_later_than_'To' (0.00s)
```
It included a `about` field on test scenarios describing the test
purpose and/or it expected output. When a description was provided with
comments it was moved to the about field.
This will set up a continuous wal streaming cluster, by adding the corresponding section in postgres manifest. Instead of having a full-fledged standby cluster as in Patroni, here we use only the wal path of the source cluster and stream from there.
Since, standby cluster is streaming from the master and does not require to create or use databases of it's own. Hence, it bypasses the creation of users or databases.
There is a separate sample manifest added to set up a standby-cluster.
Override clone s3 bucket path
Add possibility to use a custom s3 bucket path for cloning a cluster
from an arbitrary bucket (e.g. from another k8s cluster). For that
a new config options is introduced `s3_wal_path`, that should point
to a location that spilo would understand.
* turns PostgresStatus type into a struct with field PostgresClusterStatus
* setStatus patch target is now /status subresource
* unmarshalling PostgresStatus takes care of previous status field convention
* new simple bool functions status.Running(), status.Creating()
Add possibility to mount a tmpfs volume to /dev/shm to avoid issues like
[this](https://github.com/docker-library/postgres/issues/416). To achieve that
two new options were introduced:
* `enableShmVolume` to PostgreSQL manifest, to specify whether or not mount
this volume per database cluster
* `enable_shm_volume` to operator configuration, to specify whether or not mount
per operator.
The first one, `enableShmVolume` takes precedence to allow us to be more flexible.
Client-go provides a https://github.com/kubernetes/code-generator package in order to provide the API to work with CRDs similar to the one available for built-in types, i.e. Pods, Statefulsets and so on.
Use this package to generate deepcopy methods (required for CRDs), instead of using an external deepcopy package; we also generate APIs used to manipulate both Postgres and OperatorConfiguration CRDs, as well as informers and listers for the Postgres CRD, instead of using generic informers and CRD REST API; by using generated code we can get rid of some custom and obscure CRD-related code and use a better API.
All generated code resides in /pkg/generated, with an exception of zz_deepcopy.go in apis/acid.zalan.do/v1
Rename postgres-operator-configuration CRD to OperatorConfiguration, since the former broke naming convention in the code-generator.
Moved Postgresql, PostgresqlList, OperatorConfiguration and OperatorConfigurationList and other types used by them into
Change the type of the Error field in the Postgresql crd to a string, so that client-go could generate a deepcopy for it.
Use generated code to set status of CRD objects as well. Right now this is done with patch, however, Kubernetes 1.11 introduces the /status subresources, allowing us to set the status with
the special updateStatus call in the future. For now, we keep the code that is compatible with earlier versions of Kubernetes.
Rename postgresql.go to database.go and status.go to logs_and_api.go to reflect the purpose of each of those files.
Update client-go dependencies.
Minor reformatting and renaming.
Ida Novindasari
Polina Bungina
Jociele Padilha
Felix Kunde
Jakob Gillich
hlihhovac
Jonathan Juares Beber
Thomas Runyon
Rafia Sabih
Maxim Ivanov
teuto.net Netzdienste GmbH
Dmitry Dolgov
zerg-junior
Noah Kantrowitz
Oleksii Kliukin