* restart master first in some edge cases
* edge case is when desired is lower than effective
* wait after config patch and restart on sync whenever we see pending_restart
* convert options to int to check decrease and add unit test
* minor update to e2e tests
* wait only after restart not every sync
* using spilo 14 e2e images
* improve Patroni config sync
* collect new and updated slots to patch patroni
* refactor httpGet in Patroni and extend unit tests
* GetMemberData should call the patroni endpoint
* add PATCH test
* remove role from installLookupFunction and run it on database sync, too
* fix condition to decide on syncing pooler
* trigger lookup from database sync only if pooler is set
* use empty spec everywhere and do not sync if one lookupfunction was passed
* do not sync pooler after being disabled
* refactor restarting instances and reduce listPods calls
* only add parameters to set if it differs from effective config
* update e2e test for updating Postgres config
* patch config only once
* restart instances via rest api instead of recreating pods
* Ignore differences in bootstrap.dcs when compare SPILO_CONFIGURATION
* isBootstrapOnlyParameter is rewritten, instead of whitelist it uses blacklist
* added e2e test for max_connections decreasing
* documentation updated
* pending_restart flag added to restart api call, wait fot ttl seconds after restart
* refactoring, /restart returns error if pending_restart is set to true and patroni is not pending restart
* restart postgresql instances within pods only if pod's restart is not required
* patroni might need to restart postgresql after pods were recreated if values like max_connections decreased
* instancesRestart is not critical, try to restart pods if not successful
* cleanup
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* Create cross namespace secrets
* add test cases
* fixes
* Fixes
- include namespace in secret name only when namespace is provided
- use username.namespace as key to pgUsers only when namespace is
provided
- avoid conflict in the role creation in db by checking namespace
alongwith the username
* Update unit tests
* Fix test case
* Fixes
- update regular expression for usernames
- add test to allow check for valid usernames
- create pg roles with namespace (if any) appended in rolename
* add more test cases for valid usernames
* update docs
* fixes as per review comments
* update e2e
* fixes
* Add toggle to allow namespaced secrets
* update docs
* comment update
* Update e2e/tests/test_e2e.py
* few minor fixes
* fix unit tests
* fix e2e
* fix e2e attempt 2
* fix e2e
Co-authored-by: Rafia Sabih <rafia.sabih@zalando.de>
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* rename db roles that are removed from manifests
* extend PostgresTeam e2e test
* make suffix configurable and add deprecated field to pgUser struct
* deny LOGIN from deprecated roles
* update feature documentation
* replace statefulset on annotation diff
* remove update annotation function for statefulset
* add unit test for syncing annotations
* add inherited annotation to unit test
* add TODOs for moving rooling update label on pods
* steer rolling update via pod annotation
* rename patch method and fix reading flag on sync
* pass only pods to recreatePods function
* do not take address of iterator if you use it later
* add e2e test and pass switchover targets to recreatePods
* add wait_for_pod_failover for e2e test
* add one more e2e test case
* helm chart remove 1.6.0 archive from 1.6.0 archive
* reflect code review feedback
Support major version upgrade trigger via manifest. There is `off` `manual` and `full`. Manual is what you expect, and full will auto upgrade clusters below a certain threshold.
* add comments where inherited annotations could be added
* add inheritedAnnotations feature
* return nil if no annotations are set
* minor changes
* first downscaler then inherited annotations
* add unit test for inherited annotations
* add pvc to test + minor changes
* missing comma
* fix nil map assignment
* set annotations in the same order it is done in other places
* replace acidClientSet with acid getters in K8s client
* more fixes on clientSet vs getters
* minor changes
* remove endpoints from annotation test
* refine unit test - but deployment and sts are still empty
* fix checkinng sts and deployment
* make annotations setter one liners
* no need for len check anymore
Co-authored-by: Rafia Sabih <rafia.sabih@zalando.de>
* initial commit for gp3 migration.
* Default volume migration done.
* Added Gomock and one test case with mock.
* Dep update.
* more changes for code gen.
* push fake package.
* Rename var.
* Changes to Makefile and return value.
* Macke mocks phony due to overlap in foldername.
* Learning as one goes. Initialize map.
* Wrong toggle.
* Expect modify call.
* Fix mapping of ids in test.
* Fix volume id.
* volume ids.
* Fixing test setup. Late night...
* create all pvs.
* Fix test case config.
* store volumes and compare.
* More logs.
* Logging of migration action.
* Ensure to log errors.
* Log warning if modify failed, e.g. due to ebs volume state.
* Add more output.
* Skip local e2e tests.
* Reflect k8s volume id in test data. Extract aws volume id from k8s value.
* Finalizing ebs migration.
* More logs. describe fails.
* Fix non existing fields in gp2 discovery.
* Remove nothing to do flag for migration.
* Final commit for migration.
* add new options to all places
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* Enable connection pooler for replica
* Refactor code for connection pooler
- Move all the relevant code to a separate file
- Move all the related tests to a separate file
- Avoid using cluster where not required
- Simplify the logic in sync and other methods
- Cleanup of duplicated or unused code
* Fix labels for the replica pods
* Update deleteConnectionPooler to include role
* Adding test cases and other changes
- Fix unit test and delete secret when required only
- Make sure we use empty fresh cluster for every test case.
* enhance e2e test
* Disable pooler in complete manifest as this is source for e2e too an creates unnecessary pooler setups.
Co-authored-by: Rafia Sabih <rafia.sabih@zalando.de>
Co-authored-by: Jan Mussler <janm81@gmail.com>
* check resize mode on update events
* add unit test for PVC resizing
* set resize mode to pvc in charts and manifests
* add test for quantityToGigabyte
* just one debug line for syncing volumes
* extend test and update log msg
* Improving end 2 end tests, especially speed of execution and error, by implementing proper eventual asserts and timeouts.
* Add documentation for running individual tests
* Fixed String encoding in Patorni state check and error case
* Printing config as multi log line entity, makes it readable and grepable on startup
* Cosmetic changes to logs. Removed quotes from diff. Move all object diffs to text diff. Enabled padding for log level.
* Mount script with tools for easy logaccess and watching objects.
* Set proper update strategy for Postgres operator deployment.
* Move long running test to end. Move pooler test to new functions.
* Remove quote from valid K8s identifiers.
* Lookup function installation
Due to reusing a previous database connection without closing it, lookup
function installation process was skipping the first database in the
list, installing twice into postgres db instead. To prevent that, make
internal initDbConnWithName to overwrite a connection object, and return
the same object only from initDbConn, which is sort of public interface.
Another solution for this would be to modify initDbConnWithName to
return a connection object and then generate one temporary connection
for each db. It sound feasible but after one attempt it seems it
requires a bit more changes around (init, close connections) and
doesn't bring anything significantly better on the table. In case if
some future changes will prove this wrong, do not hesitate to refactor.
Change retry strategy to more insistive one, namely:
* retry on the next sync even if we failed to process one database and
install pooler appliance.
* perform the whole installation unconditionally on update, since the
list of target databases could be changed.
And for the sake of making it even more robust, also log the case when
operator decides to skip installation.
Extend connection pooler e2e test with verification that all dbs have
required schema installed.
* Try to resize pvc if resizing pv has failed
* added config option to switch between storage resize strategies
* changes according to requests
* Update pkg/controller/operator_config.go
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* enable_storage_resize documented
added examples to the default configuration and helm value files
* enable_storage_resize renamed to volume_resize_mode, off by default
* volume_resize_mode renamed to storage_resize_mode
* Update pkg/apis/acid.zalan.do/v1/crds.go
* pkg/cluster/volumes.go updated
* Update docs/reference/operator_parameters.md
* Update manifests/postgresql-operator-default-configuration.yaml
* Update pkg/controller/operator_config.go
* Update pkg/util/config/config.go
* Update charts/postgres-operator/values-crd.yaml
* Update charts/postgres-operator/values.yaml
* Update docs/reference/operator_parameters.md
* added logging if no changes required
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* try to emit error for missing team name in cluster name
* skip creation after new cluster object
* move SetStatus to k8sclient and emit event when skipping creation and rename to SetPostgresCRDStatus
Co-authored-by: Felix Kunde <felix.kunde@zalando.de>
* Initial commit
* Corrections
- set the type of the new configuration parameter to be array of
strings
- propagate the annotations to statefulset at sync
* Enable regular expression matching
* Improvements
-handle rollingUpdate flag
-modularize code
-rename config parameter name
* fix merge error
* Pass annotations to connection pooler deployment
* update code-gen
* Add documentation and update manifests
* add e2e test and introduce option in configmap
* fix service annotations test
* Add unit test
* fix e2e tests
* better key lookup of annotations tests
* add debug message for annotation tests
* Fix typos
* minor fix for looping
* Handle update path and renaming
- handle the update path to update sts and connection pooler deployment.
This way no need to wait for sync
- rename the parameter to downscaler_annotations
- handle other review comments
* another try to fix python loops
* Avoid unneccessary update events
* Update manifests
* some final polishing
* fix cluster_test after polishing
Co-authored-by: Rafia Sabih <rafia.sabih@zalando.de>
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* PreparedDatabases with default role setup
* merge changes from master
* include preparedDatabases spec check when syncing databases
* create a default preparedDB if not specified
* add more default privileges for schemas
* use empty brackets block for undefined objects
* cover more default privilege scenarios and always define admin role
* add DefaultUsers flag
* support extensions and defaultUsers for preparedDatabases
* remove exact version in deployment manifest
* enable CRD validation for new field
* update generated code
* reflect code review
* fix typo in SQL command
* add documentation for preparedDatabases feature + minor changes
* some datname should stay
* add unit tests
* reflect some feedback
* init users for preparedDatabases also on update
* only change DB default privileges on creation
* add one more section in user docs
* one more sentence
* initial implementation
* describe forcing the rolling upgrade
* make parameter name more descriptive
* add missing pieces
* address review
* address review
* fix bug in e2e tests
* fix cluster name label in e2e test
* raise test timeout
* load spilo test image
* use available spilo image
* delete replica pod for lazy update test
* fix e2e
* fix e2e with a vengeance
* lets wait for another 30m
* print pod name in error msg
* print pod name in error msg 2
* raise timeout, comment other tests
* subsequent updates of config
* add comma
* fix e2e test
* run unit tests before e2e
* remove conflicting dependency
* Revert "remove conflicting dependency"
This reverts commit 65fc09054b.
* improve cdp build
* dont run unit before e2e tests
* Revert "improve cdp build"
This reverts commit e2a8fa12aa.
Co-authored-by: Sergey Dudoladov <sergey.dudoladov@zalando.de>
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* Add EventsGetter to KubeClient to enable to sending K8S events
* Add eventRecorder to the controller, initialize it and hand it down to cluster via its constructor to enable it to emit events this way
* Add first set of events which then go to the postgresql custom resource the user interacts with to provide some feedback
* Add right to "create" events to operator cluster role
* Adapt cluster tests to new function sigurature with eventRecord (via NewFakeRecorder)
* Get a proper reference before sending events to a resource
Co-authored-by: Christian Rohmann <christian.rohmann@inovex.de>
* further compatibility with k8sUseConfigMaps - skip further endpoints related actions
* Update pkg/cluster/cluster.go
thanks!
Co-Authored-By: Felix Kunde <felix-kunde@gmx.de>
* Update pkg/cluster/cluster.go
Co-Authored-By: Felix Kunde <felix-kunde@gmx.de>
* Update pkg/cluster/cluster.go
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
There is a possibility to pass nil as one of the specs and an empty spec
into syncConnectionPooler. In this case it will perfom a syncronization
because nil != empty struct. Avoid such cases and make it testable by
returning list of syncronization reasons on top together with the final
error.
Connection pooler support
Add support for a connection pooler. The idea is to make it generic enough to
be able to switch between different implementations (e.g. pgbouncer or
odyssey). Operator needs to create a deployment with pooler and a service for
it to access.
For connection pool to work properly, a database needs to be prepared by
operator, namely a separate user have to be created with an access to an
installed lookup function (to fetch credential for other users).
This setups is supposed to be used only by robot/application users. Usually a
connection pool implementation is more CPU bounded, so it makes sense to create
several pods for connection pool with more emphasize on cpu resources. At the
moment there are no special affinity or tolerations assigned to bring those
pods closer to the database. For availability purposes minimal number of
connection pool pods is 2, ideally they have to be distributed between
different nodes/AZ, but it's not enforced in the operator itself. Available
configuration supposed to be ergonomic and in the normal case require minimum
changes to a manifest to enable connection pool. To have more control over the
configuration and functionality on the pool side one can customize the
corresponding docker image.
Co-authored-by: Felix Kunde <felix-kunde@gmx.de>
* add validation for PG resources and volume size
* check resource requests also on UPDATE and SYNC + update docs
* if cluster was running don't error on sync
This will set up a continuous wal streaming cluster, by adding the corresponding section in postgres manifest. Instead of having a full-fledged standby cluster as in Patroni, here we use only the wal path of the source cluster and stream from there.
Since, standby cluster is streaming from the master and does not require to create or use databases of it's own. Hence, it bypasses the creation of users or databases.
There is a separate sample manifest added to set up a standby-cluster.
* turns PostgresStatus type into a struct with field PostgresClusterStatus
* setStatus patch target is now /status subresource
* unmarshalling PostgresStatus takes care of previous status field convention
* new simple bool functions status.Running(), status.Creating()
Client-go provides a https://github.com/kubernetes/code-generator package in order to provide the API to work with CRDs similar to the one available for built-in types, i.e. Pods, Statefulsets and so on.
Use this package to generate deepcopy methods (required for CRDs), instead of using an external deepcopy package; we also generate APIs used to manipulate both Postgres and OperatorConfiguration CRDs, as well as informers and listers for the Postgres CRD, instead of using generic informers and CRD REST API; by using generated code we can get rid of some custom and obscure CRD-related code and use a better API.
All generated code resides in /pkg/generated, with an exception of zz_deepcopy.go in apis/acid.zalan.do/v1
Rename postgres-operator-configuration CRD to OperatorConfiguration, since the former broke naming convention in the code-generator.
Moved Postgresql, PostgresqlList, OperatorConfiguration and OperatorConfigurationList and other types used by them into
Change the type of the Error field in the Postgresql crd to a string, so that client-go could generate a deepcopy for it.
Use generated code to set status of CRD objects as well. Right now this is done with patch, however, Kubernetes 1.11 introduces the /status subresources, allowing us to set the status with
the special updateStatus call in the future. For now, we keep the code that is compatible with earlier versions of Kubernetes.
Rename postgresql.go to database.go and status.go to logs_and_api.go to reflect the purpose of each of those files.
Update client-go dependencies.
Minor reformatting and renaming.
Run more linters in the gometalinter, i.e. deadcode, megacheck,
nakedret, dup.
More consistent code formatting, remove two dead functions, eliminate
naked a bunch of naked returns, refactor a few functions to avoid code
duplication.
* Allow configuring pod priority globally and per cluster.
Allow to specify pod priority class for all pods managed by the operator,
as well as for those belonging to individual clusters.
Controlled by the pod_priority_class_name operator configuration
parameter and the podPriorityClassName manifest option.
See https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
for the explanation on how to define priority classes since Kubernetes 1.8.
Some import order changes are due to go fmt.
Removal of OrphanDependents deprecated field.
Code review by @zerg-junior
There are shortcuts in this code, i.e. we created the deepcopy function
by using the deepcopy package instead of the generated code, that will
be addressed once migrated to client-go v8. Also, some objects,
particularly statefulsets, are still taken from v1beta, this will also
be addressed in further commits once the changes are stabilized.
Call Patroni API /config in order to set special options that are
ignored when set in the configuration file, such as max_connections.
Per https://github.com/zalando-incubator/postgres-operator/issues/297
* Some minor refacoring:
Rename Cluster ManualFailover to Swithover
Rename Patroni Failover to Switchover
Add more details to error messages and comments introduced in this PR.
Review by @zerg-junior
Avoid showing "there is no service in the cluster" when syncing a
service for the cluster if the operator has been restarted after
the cluster had been created.
Compare pods controller revisions with the one for the statefulset
to determine whether the pod is running the latest revision and,
therefore, no rolling update is necessary. This is performed only
during the operator start, afterwards the rolling update status
that is stored locally in the cluster structure is used for all
rolling update decisions.
* Track origin of roles.
* Propagate changes on infrastructure roles to corresponding secrets.
When the password in the infrastructure role is updated, re-generate the
secret for that role.
Previously, the password for an infrastructure role was always fetched from
the secret, making any updates to such role a no-op after the corresponding
secret had been generated.
There used to be a masterLess flag that was supposed to indicate whether the cluster it belongs to runs without the acting master by design. At some point, as we didn't really have support for such clusters, the flag has been misused to indicate there is no master in the cluster. However, that was not done consistently (a cluster without all pods running would never be masterless, even when the master is not among the running pods) and it was based on the wrong assumption that the masterless cluster will remain masterless until the next attempt to change that flag, ignoring the possibility of master coming up or some node doing a successful promotion. Therefore, this PR gets rid of that flag completely.
When the cluster is running with 0 instances, there is obviously no master and it makes no sense to create any database objects inside the non-existing master. Therefore, this PR introduces an additional check for that.
recreatePods were assuming that the roles of the pods recorded when the function has stared will not change; for instance, terminated replica pods should start as replicas. Revisit that assumption by looking at the actual role of the re-spawned pods; that avoids a failover if some replica has promoted to the master role while being re-spawned. In addition, if the failover from the old master was unsuccessful, we used to stop and leave the old master running on an old pod, without recording this fact anywhere. This PR makes the failover failure emit a warning, but not stop recreating the last master pod; in the worst case, the running master will be terminated, however, this case is rather unlikely one.
As a side effect, make waitForPodLabel return the pod definition it waited for, avoiding extra API calls in recreatePods and movePodFromEndOfLifeNode
Introduce a new lock called specMu lock to protect the cluster spec.
This lock is held on update and sync, and when retrieving the spec in
the API code. There is no need to acquire it for cluster creation and
deletion: creation assigns the spec to the cluster before linking it to
the controller, and deletion just removes the cluster from the list in
the controller, both holding the global clustersMu Lock.
* Scalyr agent sidecar for log shipping
* Remove the default for the Scalyr image
Now the image needs to be specified explicitly to enable log shipping to
Scalyr. This removes the problem of having to generate the config file
or publish our agent image repository.
* Add configuration variable for Scalyr server URL
Defaults to the EU address.
* Alter style
Newlines are cheap and make code easier to edit/refactor, but ok.
* Fix StatefulSet comparison logic
I broke it when I made the comparison consider all containers in the
PostgreSQL pod.
* Make sure the statefulset that is deleted manually gets re-created.
Per report and analysis by Manuel Gomez.
* Move the existence checks for other objects out of the Create functions.
create{Object} for services, endpoints and PDBs refused to continue if
there is a cached definition in the cluster, however, the only place
where it makes sense is when creating a new cluster. Note that contrary
to the statefulset this doesn't fix any issues, since those definitions
were nullified correspondingly when the sync code detected there is no
object present in the Kubernetes cluster.
* Introduce higher and lower bounds for the number of instances
Reduce the number of instances to the min_instances if it is lower and
to the max_instances if it is higher. -1 for either of those means there
is no lower or upper bound.
In addition, terminate the operator when there is a nonsense in the
configuration (i.e. max_instances < min_instances).
Reviewed by Jan Mußler and Sergey Dudoladov.
- make sure that the secrets for the system users (superuser, replication)
are not deleted when the main cluster is. Therefore, we can re-create
the cluster, potentially forcing Patroni to restore it from the backup
and enable Patroni to connect, since it will use the old password, not
the newly generated random one.
- when syncing users, always check whether they are already in the DB.
Previously, we did this only for the sync cluster case, but the new
cluster could be actually the one restored from the backup by Patroni,
having all or some of the users already in place.
- delete endponts last. Patroni uses the $clustername endpoint in order
to store the leader related metadata. If we remove it before removing
all pods, one of those pods running Patroni will re-create it and the
next attempt to create the cluster with the same name will stuble on
the existing endpoint.
- Use db.Exec instead of db.Query for queries that expect no result.
This also fixes the issue with the DB creation, since we didn't
release an empty Row object it was not possible to create more than
one database for a cluster.
Add options to the PgUser structure, potentially allowing to set
per-role options in the cluster definition as well.
Introduce api_roles_configuration operator option with the default
of log_statement=all
- Call comparison function in the case of the sync as well as for update
- Include full cluster name in PDB name
- Assign cluster labels to the PDB object
Open and close DB connections on-demand.
Previously, we used to leave the DB connection open while the
cluster was registered with the operator, potentially resutling
in dangled connections if the operator terminates abnormally.
Small refactoring around the role syncing code.
* client-go v4.0.0-beta0
* remove unnecessary methods for tpr object
* rest client: use interface instead of structure pointer
* proper names for constants; some clean up for log messages
* remove teams api client from controller and make it per cluster
* Deny all requests to the load balancer by default.
* Operator-wide toggle for the load-balancer.
* Define per-cluster useLoadBalancer option.
If useLoadBalancer is not set - then operator-wide defaults take place. If it
is true - the load balancer is created, otherwise a service type clusterIP is
created.
Internally, we have to completely replace the service if the service type
changes. We cannot patch, since some fields from the old service that will
remain after patch are incompatible with the new one, and handling them
explicitly when updating the service is ugly and error-prone. We cannot
update the service because of the immutable fields, that leaves us the only
option of deleting the old service and creating the new one. Unfortunately,
there is still an issue of unnecessary removal of endpoints associated with
the service, it will be addressed in future commits.
* Revert the unintended effect of go fmt
* Recreate endpoints on service update.
When the service type is changed, the service is deleted and then
the one with the new type is created. Unfortnately, endpoints are
deleted as well. Re-create them afterwards, preserving the original
addresses stored in them.
* Improve error messages and comments. Use generate instead of gen in names.
The flag adds a replica service with the name cluster_name-repl and
a DNS name that defaults to {cluster}-repl.{team}.{hostedzone}.
The implementation converted Service field of the cluster into a map
with one or two elements and deals with the cases when the new flag
is changed on a running cluster
(the update and the sync should create or delete the replica service).
In order to pick up master and replica service and master endpoint
when listing cluster resources.
* Update the spec when updating the cluster.
In order to support volumes different from EBS and filesystems other than EXT2/3/4 the respective code parts were implemented as interfaces. Adding the new resize for the volume or the filesystem will require implementing the interface, but no other changes in the cluster code itself.
Volume resizing first changes the EBS and the filesystem, and only afterwards is reflected in the Kubernetes "PersistentVolume" object. This is done deliberately to be able to check if the volume needs resizing by peeking at the Size of the PersistentVolume structure. We recheck, nevertheless, in the EBSVolumeResizer, whether the actual EBS volume size doesn't match the spec, since call to the AWS ModifyVolume is counted against the resize limit of once every 6 hours, even for those calls that shouldn't result in an actual resize (i.e. when the size matches the one for the running volume).
As a collateral, split the constants into multiple files, move the volume code into a separate file and fix minor issues related to the error reporting.
Felix Kunde
Igor Yanchenko
Rafia Sabih
machine424
Jan Mussler
Sergey Dudoladov
Dmitry Dolgov
neelasha-09
Christian Rohmann
ReSearchITEng
Oleksii Kliukin
Oleksii Kliukin
Oleksii Kliukin
Sergey Dudoladov
Manuel Gómez
Murat Kabilov
Murat Kabilov
Oleksii Kliukin