From 3d91d31f4b5a4736da9950c3e8b1cc57143a9a92 Mon Sep 17 00:00:00 2001 From: Felix Kunde Date: Fri, 8 May 2026 16:14:56 +0200 Subject: [PATCH] more cleaning up --- .../postgres-operator/crds/postgresqls.yaml | 51 +++++ docs/reference/cluster_manifest.md | 4 - manifests/postgresql.crd.yaml | 51 +++++ pkg/apis/acid.zalan.do/v1/postgresql.crd.yaml | 212 ++++++++++++++++++ 4 files changed, 314 insertions(+), 4 deletions(-) diff --git a/charts/postgres-operator/crds/postgresqls.yaml b/charts/postgres-operator/crds/postgresqls.yaml index 90e90e280..8330f0ced 100644 --- a/charts/postgres-operator/crds/postgresqls.yaml +++ b/charts/postgres-operator/crds/postgresqls.yaml @@ -855,6 +855,57 @@ spec: type: object type: object type: object + + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in a + single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map readinessProbe: description: |- Periodic probe of container service readiness. diff --git a/docs/reference/cluster_manifest.md b/docs/reference/cluster_manifest.md index a45350f38..fd0660f57 100644 --- a/docs/reference/cluster_manifest.md +++ b/docs/reference/cluster_manifest.md @@ -85,10 +85,6 @@ These parameters are grouped directly under the `spec` key in the manifest. requires a custom Spilo image. Note the FSGroup of a Pod cannot be changed without recreating a new Pod. Optional. -* **livenessProbe** - Allows for adding a liveness probe to the Spilo container to detect if it's - running properly. - * **enableMasterLoadBalancer** boolean flag to override the operator defaults (set by the `enable_master_load_balancer` parameter) to define whether to enable the load diff --git a/manifests/postgresql.crd.yaml b/manifests/postgresql.crd.yaml index 0ea5a1182..7075e4479 100644 --- a/manifests/postgresql.crd.yaml +++ b/manifests/postgresql.crd.yaml @@ -856,6 +856,57 @@ spec: type: object type: object type: object + + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in a + single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map readinessProbe: description: |- Periodic probe of container service readiness. diff --git a/pkg/apis/acid.zalan.do/v1/postgresql.crd.yaml b/pkg/apis/acid.zalan.do/v1/postgresql.crd.yaml index 0ea5a1182..39811824e 100644 --- a/pkg/apis/acid.zalan.do/v1/postgresql.crd.yaml +++ b/pkg/apis/acid.zalan.do/v1/postgresql.crd.yaml @@ -856,6 +856,218 @@ spec: type: object type: object type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in the + container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. HTTP + allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP port. + properties: + host: + description: 'Optional: Host name to connect to, defaults + to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in a + single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map readinessProbe: description: |- Periodic probe of container service readiness.