mirror of https://github.com/pikvm/pikvm.git
fix
This commit is contained in:
Maxim Devaev
parent
3bef525c83
commit
e8a2412dff
|
|
@ -2,20 +2,17 @@
|
|||
|
||||
## First power on
|
||||
|
||||
!!! warning
|
||||
- V2 DIY owners: Please follow this [first](https://github.com/pikvm/pikvm)<br>
|
||||
- V3 HAT *or* pre-assembled users: Please follow this [first](https://docs.pikvm.org/v3/)<br>
|
||||
- For both to work and display a video, your target system needs to be configured for the following:<br>
|
||||
1920x1080p50Hz (In some rare instances, try 30hz)<br>
|
||||
1600x1200p60Hz<br>
|
||||
1280x720p60Hz<br>
|
||||
|
||||
!!! note
|
||||
Before this guide:
|
||||
|
||||
* V4 device: please follow this [first](v4.md)
|
||||
* V3 HAT/Pre-Assembled: follow [this](v3.md)
|
||||
* V0-V2 DIY: follow [this](https://github.com/pikvm/pikvm)
|
||||
|
||||
??? example "Optional setting up Wi-Fi"
|
||||
!!! warning "Please read the following caveats"
|
||||
1. There is nothing more reliable than wired Ethernet, so it's better to use the **cable**. But who are we to stop you... :)
|
||||
2. Adding FIRSTBOOT=1 or FIRSTBOOT-1 will erase the msd partition, if used afterwords as a means of switching wifi networks, do not include this option. Instead, use different supplicant files for each wifi SSID, mv files to the supplicant dir as needed and reboot.
|
||||
2. Adding FIRSTBOOT=1 or FIRSTBOOT=1 will erase the msd partition, if used afterwords as a means of switching wifi networks, do not include this option. Instead, use different supplicant files for each wifi SSID, mv files to the supplicant dir as needed and reboot.
|
||||
3. `pikvm.txt` will be removed once its been used. You will need to recreate it again if you did not provide the correct info
|
||||
|
||||
If you want to connect PiKVM to a Wi-Fi network, you need to tell the device ESSID and password before first boot.
|
||||
|
|
|
|||
|
|
@ -92,6 +92,11 @@ If you have a kit without a metal case, you can use our free 3D printing case dr
|
|||
12. Explore the features of PiKVM using the site's table of contents and have fun!
|
||||
|
||||
|
||||
## Video modes
|
||||
|
||||
PiKVM V3 supports maximum resolution 1920x1080@50Hz, 60Hz will not work. You can use any other resolution less than the specified one, for example: 1600x1200@60Hz, 1280x720@60Hz, etc. If you have problems with the video, follow [this guide](edid.md).
|
||||
|
||||
|
||||
## ATX connection
|
||||
|
||||
[See here](atx_board.md).
|
||||
|
|
|
|||
|
|
@ -53,10 +53,10 @@
|
|||
7. Explore the features of PiKVM using the site's table of contents and have fun!
|
||||
|
||||
|
||||
## 1920x1200 video mode
|
||||
## Video modes
|
||||
|
||||
Both PiKVM V4 Mini and Plus devices support a resolution 1920x1200, however, for compatibility reasons, the default configuration uses 1920x1080.
|
||||
To enable 1920x1200, follow [this manual](edid.md).
|
||||
To enable 1920x1200, follow [this guide](edid.md).
|
||||
|
||||
|
||||
## ATX connection
|
||||
|
|
|
|||
15
docs/wifi.md
15
docs/wifi.md
|
|
@ -1,17 +1,18 @@
|
|||
# Setting up Wi-Fi
|
||||
|
||||
!!! tip
|
||||
There is nothing more reliable than wired Ethernet, so it's better to use it. Wi-Fi with the steel case (on V3) results in poor performance. But who are we to stop you... :)
|
||||
|
||||
The following describes how to setup a Wi-Fi connection on the default pikvm builds based on Arch Linux.
|
||||
The process might vary for other Linux distros. We recommend to do this while having a display and keyboard
|
||||
connected directly to the Raspberry Pi as you will loose network connectivity once you connect to a Wi-Fi.
|
||||
Alternatively you can connect to the PiKVM via SSH. The built-in Web Terminal (available through the browser) should also work.
|
||||
|
||||
!!! note "Setting up WifiI for the first time (Easy wifi access)"
|
||||
Please review [First Steps](first_steps.md) wifi section if you are setting up the following: (Mandatory) Zero(2)W or going from ethernet to wifi on any other PiKVM model (Optional).
|
||||
!!! note "Setting up Wi-Fi in the boot config (semi-auto)"
|
||||
Check out *Optional setting up Wi-Fi* in the [First Steps](first_steps.md) guide. This is mandatory if you're using Zero 2 W board.
|
||||
It will work in most other cases, especially if you have physical access to the memory card.
|
||||
|
||||
!!! warning
|
||||
There is nothing more reliable than wired Ethernet, so it's better to use it. Wi-Fi with the steel case (on V3) results in poor performance. But who are we to stop you... :)
|
||||
|
||||
!!! note "[ADVANCED USERS ONLY] Moving Wi-Fi settings for OS older than 2021.10.19"
|
||||
??? note "Moving Wi-Fi settings for OS older than 2021.10.19"
|
||||
Starting from 2021.10.19, the old way to configure Wi-Fi using `netctl` is deprecated.
|
||||
Instead, it is proposed to use a more native path with `systemd-networkd`, which is already used to configure Ethernet.
|
||||
Follow the guide and then delete the old netctl profile:
|
||||
|
|
@ -24,7 +25,7 @@ Alternatively you can connect to the PiKVM via SSH. The built-in Web Terminal (a
|
|||
```
|
||||
|
||||
|
||||
## Step by step - Advanced users ONLY section
|
||||
## Setting up Wi-Fi manually
|
||||
|
||||
1. Make filesystem writable using `rw` command.
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue