From 32d9bde4c36434d78c7ed978ba466ac6a51d0fb2 Mon Sep 17 00:00:00 2001 From: arch1mede Date: Tue, 20 Dec 2022 16:49:07 -0800 Subject: [PATCH] Update ezcoo.md (#897) Added the hotkey version to the doc. --- docs/ezcoo.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/ezcoo.md b/docs/ezcoo.md index 96fd4770..5375f43a 100644 --- a/docs/ezcoo.md +++ b/docs/ezcoo.md @@ -1,6 +1,6 @@ # ezCoo managed multiport KVM switch -The ezCoo managed switch can be controlled by PiKVM to allow it to connect to multiple hosts. A typical scenario is a single PiKVM device which can control and switch between multiple hosts or servers using the ezCoo switch. UI elements can be added to the [GPIO dropdown](gpio.md) to allow switching between hosts from the PiKVM webpage. The instructions here were tested with the ~~[ezCoo SW41HA HDMI 4x1 switch](https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb20-kvm-4-port-usbsupport-4k60hz-444-and-hdr-audio-breakout)~~ [ezCoo EZ-SW41HA-KVMU3L 4x1 switch](https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb30-kvm-3-port-usbsupport-4k60hz-444-and-hdr-audio-breakout-36). Both older USB2.0 and newer USB3.0 variants are supported. The following was testing on a Raspberry Pi 4 but should also work on the Pi 2 and 3. This document was createdy using the contributions from multiple users in our [Discord](https://discord.gg/bpmXfz5) and the author appreciates their efforts. +The ezCoo managed switch can be controlled by PiKVM to allow it to connect to multiple hosts. A typical scenario is a single PiKVM device which can control and switch between multiple hosts or servers using the ezCoo switch. UI elements can be added to the [GPIO dropdown](gpio.md) to allow switching between hosts from the PiKVM webpage. The instructions here were tested with the ~~[ezCoo SW41HA HDMI 4x1 switch](https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb20-kvm-4-port-usbsupport-4k60hz-444-and-hdr-audio-breakout)~~ [ezCoo EZ-SW41HA-KVMU3L 4x1 switch](https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb30-kvm-3-port-usbsupport-4k60hz-444-and-hdr-audio-breakout-36) OR [eccoo EZ-SW41HA-KVMU3P 4x1 switch](https://www.amazon.com/gp/product/B09ZKZK7ZB). Both older USB2.0 and newer USB3.0 variants are supported. The following was testing on a Raspberry Pi 4 but should also work on the Pi 2 and 3. This document was createdy using the contributions from multiple users in our [Discord](https://discord.gg/bpmXfz5) and the author appreciates their efforts. !!! info While most images of the switch do not show the sides, there is a Micro USB port on the side of the ezCoo switch. This is the management port, which is controlled via COM port on the ezCoo KVM. When plugged into the Raspberry Pi, it appears as `/dev/ttyUSB0`.