public_git
/
pikvm
mirror of https://github.com/pikvm/pikvm.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

update

This commit is contained in:
Maxim Devaev 2023-12-02 15:48:35 +02:00
parent a5aec1a1bf
commit 26916509d6
4 changed files with 7 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/faq.md
View File

@ -71,7 +71,7 @@ As a first step, we recommend carefully reading our documentation on [GitHub](ht
??? question "Do I need a power splitter? Why do I need one?"
* Yes for RPi4 - Please see the main readme for splitter types listed under V2 hardware
* Yes for Zero W and Zero W 2, if using dedicated power you still need to split the power from the data towards the target. If using the target for power, this is not needed.
* This is not needed if you have a PiKVM V3, as the HAT splits power and signal on the board.
* This is not needed if you have a PiKVM V3 and V4, as they splits power and signal on the board.
??? question "Can I use PiKVM with non-Raspberry Pi boards (Orange, Nano, etc)?"
@ -360,7 +360,7 @@ As a first step, we recommend carefully reading our documentation on [GitHub](ht
??? question "PiKVM does not show the video from the computer at all"
* Double-check that the video capture device is connected correctly. For the [CSI bridge](/README.md#for-the-hdmi-csi-bridge), this should be exactly the camera port; for the [USB dongle](/README.md#for-the-hdmi-usb-dongle), strictly the port indicated in the picture.
* Double-check that the video capture device is connected correctly.
* Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).
* Your computer may have turned on sleep mode for the monitor. Move the mouse to turn it off.
* For windows you might need to check for the active signal resolution. To change the active signal resolution you have to go to Settings>System>Display>Advanced display settings>Display adapter properties then, click "List All Models" and choose the one you want. Keep trying different Hz settings.
@ -596,7 +596,7 @@ As a first step, we recommend carefully reading our documentation on [GitHub](ht
??? question "LEDs/Switches do not work in ATX control"
Double check your wiring as per [the documentation](/README.md#setting-up-the-v2). Make sure you placed the relays (G3VM-61A1) in the correct orientation. The relays for switches (Power, Reset) have a different orientation than the ones for LEDs.
Double check your wiring. Make sure you placed the relays (G3VM-61A1) in the correct orientation. The relays for switches (Power, Reset) have a different orientation than the ones for LEDs.
??? question "My PiKVM keeps disconnecting from the Wi-Fi network"

6
docs/first_steps.md
View File

@ -1,11 +1,5 @@
# First steps
!!! note "Before this guide"
* PiKVM V4 device: please follow this [first](v4.md)
* PiKVM V3 HAT/Pre-Assembled: follow [this](v3.md)
* DIY V1-V2: follow [this](https://github.com/pikvm/pikvm)
-----
## First power on

7
docs/flashing_os.md
View File

@ -116,11 +116,6 @@ You can also use `dd_rescue` or `ddrescue`.
<img src="RPi-imager6.jpg" width="400" />
8. Remove the memory card after successful completion. If an error occurs during flashing or booting PiKVM, repeat the process.
If the error persists, use a different card.
If the error persists, use a different memory card.
<img src="RPi-imager7.jpg" width="400" />
!!! tip
If an error occurs during flashing or booting PiKVM, repeat the process.
When you have completed these steps, please move to the [First Steps doc.](https://docs.pikvm.org/first_steps/)

6
docs/wifi.md
View File

@ -9,8 +9,8 @@ or a serial console connected directly to the Raspberry Pi as you will loose net
Alternatively you can connect to the PiKVM via SSH. The built-in Web Terminal (available through the browser) should also work.
!!! note "Setting up Wi-Fi in the boot config (semi-auto)"
Check out *Optional setting up Wi-Fi* in the [First Steps](first_steps.md) guide. This is mandatory if you're using Zero 2 W board.
It will work in most other cases, especially if you have physical access to the memory card.
Check out [this guide](on_boot_config.md) guide. It is mandatory if you're using Zero 2 W board.
It will useful in most other cases, especially if you have physical access to the memory card.
??? note "Moving Wi-Fi settings for OS older than 2021.10.19"
Starting from 2021.10.19, the old way to configure Wi-Fi using `netctl` is deprecated.
@ -39,9 +39,9 @@ Alternatively you can connect to the PiKVM via SSH. The built-in Web Terminal (a
DHCP=yes
DNSSEC=no
# Use same IP by forcing to use MAC address for clientID
[DHCP]
ClientIdentifier=mac
RouteMetric=50
```
3. Set network ESSID and password: