diff --git a/docs/_diy/rpi2w_csi_connection.jpg b/docs/_diy/rpi2w_csi_connection.jpg
new file mode 100644
index 00000000..cb9f50db
Binary files /dev/null and b/docs/_diy/rpi2w_csi_connection.jpg differ
diff --git a/docs/_diy_setup_video_csi.md b/docs/_diy_setup_video_csi.md
index 14e8a9da..cff2fed2 100644
--- a/docs/_diy_setup_video_csi.md
+++ b/docs/_diy_setup_video_csi.md
@@ -9,9 +9,14 @@ On the Raspberry Pi side you can gently lift the black part up and a little bit
For the HDMI-CSI bridge this operation depends on the version you bought.
Either pull it gently up as on the Raspberry or push it sideways.
Make sure that the cable is inserted on the correct side and until it stops, and then push the black latch back.
+Avoid using force when pushing the cable in, as the slots bond to the PCB is quite fragile.
Never connect or disconnect the flat cable from a powered device. This is not Plug-and-Play, and you can damage it.
Also use only the cable that was included with the device package, or make sure that the third-party cable has the correct pinout.
| HDMI-CSI bridge connected to Raspberry Pi 4 |
|---------------------------------------------|
| 
|
+
+| HDMI-CSI bridge connected to Raspberry Pi 2 W (using the adapter cable) |
+|-------------------------------------------------------------------------|
+| 
|