update

docs/_fahrenheit.md

@@ -1,4 +1,4 @@
-??? note "Choose Fahrenheit over Celsius to display on the OLED"
+??? note "How to set up Fahrenheit on the OLED"
 
     Create a directory for a configuration file:
 

docs/v3.md

@@ -214,9 +214,28 @@ For security's sake, it's best to change the default passwords immediately after
 
     ![Work remotely](../v4/remote-screen.png)
 
-## Additional setting up
+## Further steps
 
-??? note "If your kit includes the OLED display and/or the fan, you'll need to turn them on (this is only needed for the older V3 image for the HAT, in the box image everything is enabled by default)"
+1. **Get to know PiKVM OS**: read [this help section](webui.md) to better understand all the possibilities of the web user interface.
+
+2. **Update and customize the system**:
+
+    - We strongly recommend to update the PiKVM OS after the first launch:
+
+        {!_update_os.md!}
+
+    - [Harden the remote access](auth.md) by enabling 2FA.
+    - Configure access to PiKVM from the Internet using [port forwarding](port_forwarding.md) or [Tailscale VPN](tailscale.md).
+    - Enable a microphone for [two-way audio](audio.md).
+    - [Learn](conf_files_structure.md) how configuration files are structured.
+
+3. **Configure hardware**:
+
+    - Set up [ATX connection](atx_board.md).
+
+    - If you bought V3 HAT Assembly Kit and it includes the OLED display and/or the fan, you'll need to turn them on. Note this is only needed for the older V3 image for the HAT, in the box image everything is enabled by default:
+
+        ??? note "Enabling the OLED and the fan"
 
             Log in to PiKVM and run these commands:
 
@@ -227,24 +246,11 @@ For security's sake, it's best to change the default passwords immediately after
             [root@pikvm ~]# ro
             ```
 
+
+    - Choose Fahrenheit over Celsius to display on the OLED:
+
         {!_fahrenheit.md!}
 
-## Further steps
-
-1. **Get to know PiKVM OS**: read [this help section](webui.md) to better understand all the possibilities of the web user interface.
-
-2. **Update and customize the system**:
-
-    - [Update](_update_os.md) the PiKVM operating system.
-    - [Harden the remote access](auth.md) by enabling 2FA and setting session expiration time.
-    - Configure access to PiKVM from the Internet using [port forwarding](port_forwarding.md) or [Tailscale VPN](tailscale.md).
-    - Enable a microphone for [two-way audio](audio.md).
-    - [Learn](conf_files_structure.md) how configuration files are structured.
-
-3. **Configure hardware**:
-
-    - Set up [ATX connection](atx_board.md).
-
 ## Known issues and limitations
 
 * **Max resolution**. PiKVM V3 supports maximum resolution 1920x1080@50Hz, 60Hz will not work. You can use any other resolution less than the specified one, for example: 1600x1200@60Hz, 1280x720@60Hz, etc. If you have problems with the video, follow [this guide](edid.md).
@@ -314,8 +320,6 @@ The standard Raspberry Pi HDMI output (marked as `VIDEO OUT` on the PiKVM case)
     * `dmesg | egrep 'tc35|1-1.4|uvc'`
     * `systemctl status kvmd-tc358743`
 
-    Note that this is not a hotplug device, and you must first turn off the power.
-
 ## Getting user support
 
 If something doesn't work, check out our [FAQ](faq.md). Otherwise, head straight to our [Discord chat](https://discord.gg/bpmXfz5).

docs/v4.md

@@ -207,8 +207,11 @@ For security's sake, it's best to change the default passwords immediately after
 
 2. **Update and customize the system**:
 
-    - [Update](_update_os.md) the PiKVM operating system.
+    - We strongly recommend to update the PiKVM OS after the first launch:
-    - [Harden the remote access](auth.md) by enabling 2FA and setting session expiration time.
+
+        {!_update_os.md!}
+
+    - [Harden the remote access](auth.md) by enabling 2FA.
     - Configure access to PiKVM from the Internet using [port forwarding](port_forwarding.md) or [Tailscale VPN](tailscale.md).
     - Enable a microphone for [two-way audio](audio.md).
     - Enable [HDMI pass-through](pass.md).
@@ -221,7 +224,9 @@ For security's sake, it's best to change the default passwords immediately after
     - Install and set up [LTE/5G modem](modem.md) (**only for PiKVM V4 Plus**).
     - Set up internal [USB 3.0](usb3v4.md) port if you need (**only for PiKVM V4 Plus**).
     - Learn about [DIP switches](dip_switches.md).
-    - {!_fahrenheit.md!}
+    - Choose Fahrenheit over Celsius to display on the OLED:
+
+        {!_fahrenheit.md!}
 
 ## Known issues and limitations
 
@@ -238,8 +243,6 @@ For security's sake, it's best to change the default passwords immediately after
     * `dmesg | egrep 'tc35|1-1.4|uvc'`
     * `systemctl status kvmd-tc358743`
 
-    Note that this is not a hotplug device, and you must first turn off the power.
-
 ## Getting user support
 
 If something doesn't work, check out our [FAQ](faq.md). Otherwise, head straight to our [Discord chat](https://discord.gg/bpmXfz5).