From 0a1510dad3bd1949e3a7b9ae9d7229d513fd3f7e Mon Sep 17 00:00:00 2001 From: Maxim Devaev Date: Wed, 3 Nov 2021 09:51:35 +0300 Subject: [PATCH] fix --- docs/v3.md | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/docs/v3.md b/docs/v3.md index 2a5dcefd..0a53fa56 100644 --- a/docs/v3.md +++ b/docs/v3.md @@ -2,8 +2,6 @@ -NOTE: Please review the back of the box. All parts are required before hat is fully functional -HINT: USB-C Bridge is located in with the ATX end which includes a pink foam spacer ## Installation requirements @@ -15,6 +13,10 @@ HINT: USB-C Bridge is located in with the ATX end which includes a pink foam spa * [Straight Ethernet cable](https://www.home-network-help.com/straight.html) (for the ATX board connection). * Power supply unit (5.1V 3A USB-C, recommended by the Raspberry Pi). +!!! tip "Before assembling" + * Please review the back of the box. All parts are required before hat is fully functional. + * The USB-C Bridge is located in with the ATX end which includes a pink foam spacer. + ## Basic setup @@ -34,7 +36,7 @@ If you have a kit without a metal case, you can use our free 3D printing case dr |-----------|------------| | | | - * **HDMI input** and **USB emulation** port must be connected to the computer. **NOTE** On the HDMI the HAT, like the CSI bridge, supports 1080p50Hz or 720p60Hz **ATX** too, but it's optional, [read below](#atx-connection). There should be no USB hub between PiKVM and the computer, as some UEFI/BIOS cannot detect them at the boot stage. + * **HDMI input** and **USB emulation** port must be connected to the computer. **ATX** too, but it's optional, [read below](#atx-connection). There should be no USB hub between PiKVM and the computer, as some UEFI/BIOS cannot detect them at the boot stage. On the HDMI the HAT, like the CSI bridge, supports 1080p50Hz or 720p60Hz or lower. * Connect **Ethernet** to the network and **USB Power** to the Raspberry Pi power supply.