nickol-knx-mcp — a design-time KNX/ETS6 assistant exposed as an MCP server, with a full demo house and a smart Home Assistant control layer.

MIT public beta · v0.1.2 Python 3.10+ Model Context Protocol

The missing ETS6 ↔ Claude
design-time layer for KNX

A design-time KNX/ETS6 assistant exposed as an MCP server. It reads your .knxproj, validates DPTs / naming / status pairs, generates Home Assistant YAML and ETS-importable exports, and produces human-readable reports — without ever touching the live bus.

★ Star on GitHub ▶ See the demo dashboard Releases
Why it exists

Two layers, one source of truth

As of 2026 there is no off-the-shelf ETS6 ↔ AI tool. This fills exactly the design-time gap — and the architecture keeps the dangerous part impossible by design.

🧠 Home Assistant
The brain — time/season/presence-aware automations, scenes, statistics. Reads real device state.
smart layer
🦾 KNX / ETS
The body — group addresses are the muscles (commands) & nerves (status/sensors). Runs autonomously.
.knxproj = truth

🔒 No bus access

Zero networking/bus libraries in the dependency tree. bus_access: false — structural, not a promise.

🧩 12 MCP tools

load · analyze (naming/DPT/status) · generate HA YAML · generate ETS XML/CSV · report. All read-only on your project.

🌍 EN / DE / RU

Classifies by DPT + multilingual name keywords. Tested across ETS 4.2 / 5.0 / 5.5 / 6 fixtures.

The demo house

A whole synthetic home — input to output

A complete worked example ships in the repo (examples/demo-home): a synthetic 2-storey home — living room with fireplace, kitchen, master + 2 kids bedrooms each with ensuite, guest WC, laundry, 2 corridors, staircase. Lighting (switch/dim/CCT/RGBW), underfloor heating + AC, sensors, scenes.

239
group addresses
47
ETS Functions
13
zones
5
deliberate mistakes

The 5 planted mistakes — and what the checks caught

#Planted mistakeCaught?
1Group address with no DPT (Living room CO₂)✅ check_dpt
2Two GAs, same name, different DPT (Kitchen temperature)✅ check_dpt
3Dimmer with on/off status but no brightness status⚠️ not yet — honest limit
4Switch with no status (Guest WC)✅ check_missing_status
5Group address with an empty name✅ check_naming

The tool surfaced its own limitation (#3): the missing-status check asks “does this control have a status?”, not “each expected status type”. Tracked for a future release — found by this very demo.

Live in Home Assistant

The dashboard

The KNX I/O drives a 5-view Home Assistant dashboard. These are real screenshots from a live Home Assistant running the demo (simulated sensors that drift over time) — note how Summer flipped the whole house to Cooling at 92% comfort. Below them, an interactive preview lets you click through the views.

Overview view: home mode, comfort gauge, scenes, climate snapshotOverview — at a glance · scenes · climate snapshot (Summer · Cooling · 92% comfort) Climate viewClimate — zones & the computed “brain”, targets & valve Lighting viewLighting — circadian 71% @ 3750K · dimmers · blinds 41/59% Energy viewEnergy & stats — gauges · runtime · air quality Presence viewPresence — mode machine · occupancy · schedules

↓ Or explore an interactive preview (mock data)

Demo House
Overview Climate Lighting Energy Presence
⌂Home
❄Winter
☀Morning
🌡8.0°C
☺78%
At a glance
Home
Morning · Winter · Weekday
Outside 8°CHVAC HeatingComfort 78%
78Comfort %
Scenes
🎬
Movie
🌙
Goodnight
🌅
Morning
🏃
Away
Climate snapshot
Living roomHeating
21.4°→21.5°
valve 70% · pre-heat 18 min
Master bedroomHeating
19.8°→20.0°
night setpoint · occupied
Zones
Living roomHeating
21.4°→21.5°
Master bedroomHeating
19.8°→20.0°
The brain (computed)
Living target
21.5°C
daypart morningmode Homewinteroccupiedwindow ✓
8-factor setpoint · pre-heat lead 18 min
🔥
Living valve
70%
Trends · 48h
Living · Bedroom · Outdoor
📈
Degree-hours today
142 °C·h
Adaptive (circadian)
62Brightness %
🌡
Colour temp
3400 K
Dimmable & colour
💡
Living cove
🟪
RGBW accent
🔆
Kitchen worktop CCT
Switched & blinds
💡
Living spots
💡
Kitchen
🪟
Living blind
position 35% · slat tilt
Energy today
14HVAC kWh
⚡
kWh / occupied-h
0.92
Runtime today
Living lights
3.4 h
Living heating
6.1 h
Occupied
11.2 h
Bath uses
7
Air & comfort
🫧
Bedroom CO₂
680 ppm
CO₂ · 24h
Mode machine
⌂
Home mode
Home ▾
👣
Anyone present
Detected
Occupancy (computed)
Living
occupied
Bedroom
clear
Master bath
clear
Corridors
active
Schedules
🗓
Work week
07:00 – 22:30
🌙
Quiet hours
23:00 – 06:30

↑ Interactive preview with mock data · the screenshots above are the real thing, live in Home Assistant.

The brain

Logic that depends on everything

On top of the KNX I/O sits a 5-layer Home Assistant control system — built on native helpers (utility_meter, history_stats, statistics, derivative, trend, threshold, schedule), 22 automations and 3 scripts.

L4 Statistics
energy meters & tariffs · runtime counters · heating degree-hours · KPIs (kWh/occupied-h, comfort)
L3 Lighting
circadian brightness & colour temp · motion/presence (only when dark) · scenes · vacation simulation
L2 Climate
8-factor target setpoint · heat/cool changeover · adaptive pre-heat · window/CO₂ interlocks
L1 Home mode
Home / Away / Night / Eco / Guest / Vacation state machine
L0 Senses
season · daypart (sun) · weekday/weekend · per-zone occupancy · comfort index

⭐ The 8-factor setpoint

A single template folds everything into one number: daypart profile → weekend hold → occupancy setback → home-mode override (Away −3°, Vacation→frost 12°) → seasonal trim / cooling target → window interlock → clamp 12–28 °C.

It's a beta — testers welcome

Try it on your own .knxproj

It's read-only and never touches a bus, so testing is safe. Run it from Claude, point it at your project, and tell us what the report got right — and wrong.

Get it on GitHub Browse the demo house How to test 💬 Join the discussion