* Revert "Change cache key calculation to be more reproducible. (#525)"
This reverts commit 1ffae47fdd.
* Add logging of composition key back
* Do not include build args in cache key
This should be save, given that the commands will have the args included
when the cache key gets built.
* Add parent directories of adding files
* Add integration Dockerfile to test parent directory permissions
* Remove unnecessary helper method
* Use a file on the internet for integration Dockerfile
- We were validating usernames/groupnames existed in etc/passwd. Docker does not do this
- We were incorrectly caching USER commands. This was fixed automatically by fixing the first part.
and our snapshot optimizations.
If a previous base image has a volume, the directory is added to the
list of files to snapshot. That directory may not actually exist in the image.
We previously had an optimization that would skip snapshotting mutli-stage images
when in an intermediate stage, until the very end.
This conflicted with another optimization to avoid snapshotting when no files had changed.
Before we were using the full image digest, but that contains a timestamp. Now
we only use the layers themselves and the image config (env vars, etc.).
Also fix a bug in unpacking the layers themselves. mtimes can change during unpacking,
so set them all once at the end.
This works around mtime-precision issues that cause us to differ from docker-built images
when the touch command executes too quickly to modify the mtime.
Also one fix in the .travis.yml beacuse something appears to have changed in their default
go installation.
This PR adds support for the dockerignore file. Previously when kaniko
had support for the dockerignore file, kaniko first went through the
build context and deleted files that were meant to be ignored. This
resulted in a really bad bug where files in user mounted volumes would
be deleted (my bad).
This time around, instead of modifying the build context at all, kaniko
will check if a file should be excluded when executing ADD/COPY
commands. If a file should be excluded (based on the .dockerignore) it
won't be copied over from the buildcontext and shouldn't end up in the
final image.
I also added a .dockerignore file and Dockerfile as an integration test,
which should fail if the dockerignore is not being processed correctly or if files aren't being excluded correctly.
Also, I removed all the integration testing from the previous version of the
dockerignore support.
Right now kaniko only supports COPY --from=<another stage>.
This commit adds support for the case where the referenced image is a remote image
in a registry that has not been used as a stage yet in the build.
From the docs on filepath.SkipDir:
> If the function returns SkipDir when invoked on a non-directory file, Walk skips the remaining files in the containing directory
This was causing the bug in #457. Since the file `/etc/hosts` was in the whitelist, when filepath.SkipDir was called the entire etc directory was skipped.
This change only returns filepath.SkipDir on directories.
When we execute multistage builds, we store the fs of each intermediate
stage at /kaniko/<stage number> if it's used later in the build. This
created a bug when extracting hardlinks, because we weren't appending
the new directory to the link path.
So, if `/tmp/file1` and `/tmp/file2` were hardlinked, kaniko was trying
to link `/kaniko/0/tmp/file1` to `/tmp/file2` instead of
`/kaniko/0/tmp/file2`. This change will append the correct directory to
the link, and fixes#437#362#352#342.
This change fixes that by properly "replaying" the Dockerfile and mutating the config when
calculating cache keys. Previously we were looking at the wrong cache key for each command
when there was more than one.
* parse arg commands at the top of dockerfiles
* fix pointer reference bug and remove debugging
* fixing tests
* account for meta args with no value
* don't take fs snapshot if / is the only changed path
* move metaArgs inside KanikoStage
* removing unused property
* check for any directory instead of just /
* remove unnecessary check
Added a --ignore flag to ignore packages and files in the build context.
This should mimic the .dockerignore file. Before starting the build, we
go through and delete ignored files from the build context.
* set default HOME env properly
* set HOME to / if user is set by uid
* fix test
* continue to skip user_run test
* fix unit test to match new functionality
* Enable overwriting of links (solves #351)
* add integration test to check extraction of images with replaced hardlinks
* Prevent following symlinks during extracting normal files
This fixes#359, #361, #362.
To add layer caching to kaniko, I added two flags: --cache and
--use-cache.
If --use-cache is set, then the cache will be used, and if --cache is
specified then that repo will be used to store cached layers. If --cache
isn't set, a cache will be inferred from the destination provided.
Currently, caching only works for RUN commands. Before executing the
command, kaniko checks if the cached layer exists. If it does, it pulls
it and extracts it. It then adds those files to the snapshotter and
append a layer to the config history. If the cached layer does not exist, kaniko executes the command and
pushes the newly created layer to the cache.
All cached layers are tagged with a stable key, which is built based off
of:
1. The base image digest
2. The current state of the filesystem
3. The current command being run
4. The current config file (to account for metadata changes)
I also added two integration tests to make sure caching works
1. Dockerfile_test_cache runs 'date', which should be exactly the same
the second time the image is built
2. Dockerfile_test_cache_install makes sure apt-get install can be
reproduced
As mentioned in #346, if only ENTRYPOINT is set in a stage then any
CMD inherited from a parent should be cleared.
If both entrypoint and cmd are set then nothing should change.
I added a function and unit test to review the config file after building a stage
which clears out config.Cmd if ENTRYPOINT was declared but CMD wasn't.
I also added an integration test to make sure this works, which should
be tested by the preexisting container-diff --metadata test.
Extracting the layers of the filesystem in order will make it easier to
extract cached layers and deal with hardlinks.
This PR implements extracting in order and adds an integration tests to
make sure hardlinks are extracted properly.
It also fixes two bugs I found when extracting symlinks:
1. We'd get a "file exists" error when trying to symlink to an existing
file with a whiteout later in the layer tarball
2. We'd get a "file exists" error when trying to create a symlink from a
file that was created in a prior layer (perhaps as a regular file or as
a symlink pointing to someting else)
To fix both of these, we resolve all symlinks in a layer at the end. I
also added logic to delete any existing paths before creating the
symlink.
Kaniko uses mtime (as well as file contents and other attributes) to
determine if files have changed. COPY and ADD commands should _always_
update the mtime, because they actually overwrite the files. However it
turns out that the mtime can lag, so kaniko would sometimes add a new
layer when using COPY or ADD on a file, and sometimes would not. This
leads to a non-deterministic number of layers.
To fix this, we have updated the kaniko commands to be more
authoritative in declaring when they have changed a file (e.g. WORKDIR
will now only create the directory when it doesn't exist) and we will
trust those files and _always_ add them, instead of only adding them if
they haven't changed.
It is possible for RUN commands to also change the filesystem, in which
case kaniko has no choice but to look at the filesystem to determine
what has changed. For this case we have added a call to `sync` however
we still cannot guarantee that sometimes the mtime will not lag, causing the
number of layers to be non-deterministic. However when I tried to cause
this behaviour with the RUN command, I couldn't.
This changes the snapshotting logic a bit; before this change, the last
command of the last stage in a Dockerfile would always scan the whole
file system and ignore the files returned by the kaniko command. Instead
we will now trust those files and assume that the snapshotting
performed by previous commands will be adequate.
Docker itself seems to rely on the storage driver to determine when
files have changed and so doesn't have to deal with these problems
directly.
An alternative implementation would use `inotify` to track which files
have changed. However that would mean watching every file in the
filesystem, and adding new watches as files are added. Not only is there
a limit on the number of files that can be watched, but according to the
man pages a) this can take a significant amount of time b) there is
complication around when events arrive (e.g. by the time they arrive,
the files may have changed) and lastly c) events can be lost, which
would mean we'd run into this non-deterministic behaviour again anyway.
Fixes#251
Issue 291 pointed out that symlink "../proc/self/mounts" in the fedora image wasn't being extracted properly and kaniko was erroring out.
This is because the file path wasn't absolute so kaniko wasn't recognizing it as a whitelisted path.
With this change, we first resolve a path to it's absolute path before checking the whitelist.
Tejal Desai
Victor Noel
Monard Vong
Priya Wadhwa
Johannes 'fish' Ziemke
dlorenc
Daisuke Taniwaki
Sharif Elgamal
peter-evans
xanonid
Christie Wilson
Andrea Giardini
Christie Wilson