This will return a string representaiton of the current filesystem to be
used with caching.
Whenever a file is explictly added (via ADD or COPY), it will be stored
in "added" in the LayeredMap. The file will map to a hash created by
CacheHasher (which doesn't take into account mtime, since that will be
different with every build, making the cache useless)
Key() will returns a sha of the added files which will be used in
determining the overall cache key for a command.
The bug in #329 occurred because of a bug in matchSources, where the
filepath wasn't absolute, so the source "/kaniko-bug/*" wasn't being
matched to the file "kaniko-bug/test-file"
To fix this, I added logic for making filepaths absolute and added to
the unit test for the function to test that it works.
Extracting the layers of the filesystem in order will make it easier to
extract cached layers and deal with hardlinks.
This PR implements extracting in order and adds an integration tests to
make sure hardlinks are extracted properly.
It also fixes two bugs I found when extracting symlinks:
1. We'd get a "file exists" error when trying to symlink to an existing
file with a whiteout later in the layer tarball
2. We'd get a "file exists" error when trying to create a symlink from a
file that was created in a prior layer (perhaps as a regular file or as
a symlink pointing to someting else)
To fix both of these, we resolve all symlinks in a layer at the end. I
also added logic to delete any existing paths before creating the
symlink.
I changed UnpackLocalTarArchive to return a list of files that were
extracted, so that the list of snapshotted files for ADD is more
accurate. Previously, we used to add all files in the extracted dir to
be snapshotted, but this could result in preexisting files being
snapshotted again.
Before #289 was merged, when copying over directories for COPY kaniko
would get a list of all files at the destination specified and add them
to the list of files to be snapshotted. If the destination was root it
would add all files. This worked because the snapshotter made sure the
file had been changed before adding it to the layer.
After #289, we changed the logic to add all files snapshotted to a layer
without checking if the files had been changed. This created the bug in
got all the files at root and added them to the layer without checking
if they had been changed.
This change should fix this bug. Now, the CopyDir function returns a
list of files it copied over and only those files are added to the list
of files to be snapshotted.
Should fix#314
To make the logic a bit more clear, when snapshotting files, the
parent dirs are now snapshotted in a different loop from the files we
are actually trying to snapshot. Unfortunately this loop is nearly
duplicated but I did managed to group some fo the related logic
together:
- A function to check if the file should be snapshotted (e.g. isn't
whitelisted, etc.)
- Created a `Tar` type to handle some of the logic around tar-ing, e.g.
tracking hardlinks and stat-ing files before adding them
One side effect of this is that now when snapshoting the file system,
files will be stat-ed twice.
This test had previously (before #231) been making a change to a file in
the kaniko dir, then checking that it isn't being snapshotted. This was
to test the whitelisting logic, which makes sure that changes to /kaniko
aren't included in images. However the test creates a temporary dir, so
the kaniko dir is actually in /tmp/<some temp dir>/kaniko, and
in #231 the logic was simplified to no longer have a special case for
tests. The test continued to pass because `MaybeAdd` noticed that the
kaniko file wasn't changing, and didn't add it. After changing this to
always add the files, it revealed that this was left behind by accident.
I also opened #307 to add integration test coverage for this logic.
I also marked `CheckErrorAndDeepEqual` as a helper function so that when
it fails, the line number reported is where that was called.
Kaniko uses mtime (as well as file contents and other attributes) to
determine if files have changed. COPY and ADD commands should _always_
update the mtime, because they actually overwrite the files. However it
turns out that the mtime can lag, so kaniko would sometimes add a new
layer when using COPY or ADD on a file, and sometimes would not. This
leads to a non-deterministic number of layers.
To fix this, we have updated the kaniko commands to be more
authoritative in declaring when they have changed a file (e.g. WORKDIR
will now only create the directory when it doesn't exist) and we will
trust those files and _always_ add them, instead of only adding them if
they haven't changed.
It is possible for RUN commands to also change the filesystem, in which
case kaniko has no choice but to look at the filesystem to determine
what has changed. For this case we have added a call to `sync` however
we still cannot guarantee that sometimes the mtime will not lag, causing the
number of layers to be non-deterministic. However when I tried to cause
this behaviour with the RUN command, I couldn't.
This changes the snapshotting logic a bit; before this change, the last
command of the last stage in a Dockerfile would always scan the whole
file system and ignore the files returned by the kaniko command. Instead
we will now trust those files and assume that the snapshotting
performed by previous commands will be adequate.
Docker itself seems to rely on the storage driver to determine when
files have changed and so doesn't have to deal with these problems
directly.
An alternative implementation would use `inotify` to track which files
have changed. However that would mean watching every file in the
filesystem, and adding new watches as files are added. Not only is there
a limit on the number of files that can be watched, but according to the
man pages a) this can take a significant amount of time b) there is
complication around when events arrive (e.g. by the time they arrive,
the files may have changed) and lastly c) events can be lost, which
would mean we'd run into this non-deterministic behaviour again anyway.
Fixes#251
In this refactor I:
1. Created KanikoOptions to make it easier to pass around arguments
passed in through the command line
2. Reorganized executor.go by putting the logic for pushing the image in
a new file push.go
3. Made some error messages clearer
4. Fixed a mistake in the README for pushing to AWS
5. Marked the --bucket flag as hidden since we want people to use
--context instead, and marked an aws flag as hidden which is set in a
vendored directorya
This change should fix the bug in #294, where kaniko wasn't recognizing
that a stage would be used in a later build and so wasn't saving it as a
tarball.
Each stage of the Dockerfile has a Name and a BaseName (FROM BaseName as
Name), but if a Name isn't specified then it's set to the same value as
BaseName. Our test cases weren't complete enough to catch this
distinction, which is why this bug occurred.
I added more test cases to the unit tests to make sure this fix works.
Issue 291 pointed out that symlink "../proc/self/mounts" in the fedora image wasn't being extracted properly and kaniko was erroring out.
This is because the file path wasn't absolute so kaniko wasn't recognizing it as a whitelisted path.
With this change, we first resolve a path to it's absolute path before checking the whitelist.
* dep ensure and use k8schain
* checkpoint
* fix vendoring, stuff builds
* Use k8schain for pushes too
* Use NewNoClient
* update ggcr dep
* Move k8schain usage to image_util.go
When this test was originally created, an HTTP get to
`https://url.com/something/not/real` probably failed, but now it
will return a `503`, i.e. the `http.Get` call will succeed.
This test will now use a URL which should not reasonable ever
succeed (famous last words). Alternatively we could use dependency
injection and mock `http.Get` but it doesn't seem worth it.
This commit also updates the test to use `Run` to run each test
in the table test as a separate test so we can get a clear indication
which cases fail and which succeed.
* added switch to extract different sources as build context
* first rough implementation of aws s3
* added buildcontext package and interface
* added GetBuildContext func to buildcontext.go
added fallback to gcs
renamed GC struct to GCS
* improved the default behavior of build context retrieval
* renamed gc:// to gs:// in order to follow common standards
* renamed struct File to Dir and some cleanup work
* moved context.tar suffix to the buildcontext processors where it is needed
* added buildcontext retrieval as struct variable
added fallback if prefix in bucket specifier is present
* cleanup if structures
* added prefix to s3
* WIP
* Fixed build context bugs
* refactored build context
* adding reproducible test
* newer version of go-containerregistry
* new ImageOptions
* switch reproducible flag to default to false
* small fixes
* update dep
Priya Wadhwa
Sebastian Jackel
sharifelgamal
Christie Wilson
daniel-harrison
Guilherme Rezende
Andrea Giardini
Dale Tristram
dlorenc
Nick Kubala
balopat
Jason Hall
Christie Wilson
Christian Jantz
xanonid
Jon Johnson