driver: freenas-iscsi
instance_id:
httpConnection:
  protocol: http
  host: server address
  port: 80
  # use only 1 of apiKey or username/password
  # if both are present, apiKey is preferred
  # apiKey is only available starting in TrueNAS-12
  #apiKey:
  username: root
  password:
  allowInsecure: true
  # use apiVersion 2 for TrueNAS-12 and up (will work on 11.x in some scenarios as well)
  # leave unset for auto-detection
  #apiVersion: 2
sshConnection:
  host: server address
  port: 22
  username: root
  # use either password or key
  password: ""
  privateKey: |
    -----BEGIN RSA PRIVATE KEY-----
    ...
    -----END RSA PRIVATE KEY-----
zfs:
  # can be used to override defaults if necessary
  # the example below is useful for TrueNAS 12
  #cli:
  #  sudoEnabled: true
  #
  #  leave paths unset for auto-detection
  #  paths:
  #    zfs: /usr/local/sbin/zfs
  #    zpool: /usr/local/sbin/zpool
  #    sudo: /usr/local/bin/sudo
  #    chroot: /usr/sbin/chroot

  # can be used to set arbitrary values on the dataset/zvol
  # can use handlebars templates with the parameters from the storage class/CO
  #datasetProperties:
  #  "org.freenas:description": "{{ parameters.[csi.storage.k8s.io/pvc/namespace] }}/{{ parameters.[csi.storage.k8s.io/pvc/name] }}"
  #  "org.freenas:test": "{{ parameters.foo }}"
  #  "org.freenas:test2": "some value"
  
  # total volume name (zvol/<datasetParentName>/<pvc name>) length cannot exceed 63 chars
  # https://www.ixsystems.com/documentation/freenas/11.2-U5/storage.html#zfs-zvol-config-opts-tab
  # standard volume naming overhead is 46 chars
  # datasetParentName should therefore be 17 chars or less when using TrueNAS 12 or below
  datasetParentName: tank/k8s/b/vols
  # do NOT make datasetParentName and detachedSnapshotsDatasetParentName overlap
  # they may be siblings, but neither should be nested in the other 
  detachedSnapshotsDatasetParentName: tanks/k8s/b/snaps
  # "" (inherit), lz4, gzip-9, etc
  zvolCompression:
  # "" (inherit), on, off, verify
  zvolDedup:
  zvolEnableReservation: false
  # 512, 1K, 2K, 4K, 8K, 16K, 64K, 128K default is 16K
  zvolBlocksize:
iscsi:
  targetPortal: "server[:port]"
  # for multipath
  targetPortals: [] # [ "server[:port]", "server[:port]", ... ]
  # leave empty to omit usage of -I with iscsiadm
  interface:

  # MUST ensure uniqueness
  # full iqn limit is 223 bytes, plan accordingly
  # default is "{{ name }}"
  #nameTemplate: "{{ parameters.[csi.storage.k8s.io/pvc/namespace] }}-{{ parameters.[csi.storage.k8s.io/pvc/name] }}"
  namePrefix: csi-
  nameSuffix: "-clustera"

  #extentCommentTemplate: "{{ parameters.[csi.storage.k8s.io/pvc/namespace] }}-{{ parameters.[csi.storage.k8s.io/pvc/name] }}"

  # add as many as needed
  targetGroups:
    # get the correct ID from the "portal" section in the UI
    - targetGroupPortalGroup: 1
      # get the correct ID from the "initiators" section in the UI
      targetGroupInitiatorGroup: 1
      # None, CHAP, or CHAP Mutual
      targetGroupAuthType: None
      # get the correct ID from the "Authorized Access" section of the UI
      # only required if using Chap
      targetGroupAuthGroup:

  extentInsecureTpc: true
  extentXenCompat: false
  extentDisablePhysicalBlocksize: true
  # 512, 1024, 2048, or 4096,
  extentBlocksize: 512
  # "" (let FreeNAS decide, currently defaults to SSD), Unknown, SSD, 5400, 7200, 10000, 15000
  extentRpm: "SSD"
  # 0-100 (0 == ignore)
  extentAvailThreshold: 0