mirror of
https://github.com/maziggy/bambuddy.git
synced 2026-09-30 03:01:21 +02:00
maziggy
e5a18bf58b
A printer files each calibration under a nozzle id of the form HH00-0.4 (high flow) or HS00-0.4 (standard) and can hold both for one diameter -- a maintainer's H2D carries 102 high-flow entries against 6 standard -- because the same filament reads a different K through each. Nothing read that, so a standard-flow profile could be selected for a high-flow nozzle and vice versa. The flow is now stored with the profile, shown against each option in the picker, and checked before a stored profile is applied. Two spellings have to agree for that: a calibration entry says HH00-0.4 while the fitted nozzle reports HH01, so the comparison is two characters rather than four -- the trailing digits are a hardware variant the calibration table normalises to 00. Unknown flow on either side matches anything, which is what it has to do. Every profile stored before this has none. And an X1C declares none on any profile at all -- probed live, all eight come back with an empty nozzle id, against a four-digit cali_idx and a populated setting_id -- even though the machine really does take either nozzle. supports_nozzle_flow_type is therefore the wrong thing to gate on: it returns True for an X1C, and treating that silence as Standard would have dropped every X1C profile the moment a high-flow nozzle was fitted. What the printer's own table declares per profile is the test. NozzleInfo.nozzle_type carries two vocabularies by printer generation -- the nozzle material on legacy printers, the flow code on H2 -- and the comment claiming only the former is corrected. Anything that is not HH or HS reads as unknown, which is what makes the material spelling harmless. Storing both flows for one hotend and diameter is deliberately not done: spoolman_k_profile is UNIQUE on (spool, printer, extruder, diameter) with no flow column, and allowing a second row in internal mode alone would break inventory-mode parity. The picker marks a profile whose flow does not match what is fitted instead of letting it look configured while doing nothing.