bambuddy/backend/app/schemas/settings.py

import json

from pydantic import BaseModel, Field, ValidationInfo, field_validator

from backend.app.schemas.print_queue import TriState

# Outbound service URLs validated on save, so a bad value is rejected at
# configuration time with a clear message rather than failing opaquely at
# request time. Every one of these services is commonly self-hosted on the same
# host or LAN as Bambuddy, so the LAN-service policy applies: loopback and
# RFC-1918 stay permitted, while cloud-metadata endpoints, numeric-encoded IPs,
# IPv4-mapped IPv6 and non-HTTP schemes are rejected. See
# ``_url_safety.assert_safe_lan_service_url``.
#
# Module-level rather than a class attribute so the CI backstop in
# tests/unit/test_outbound_url_ssrf_guards.py can import the real list and
# cannot drift from it. Any new outbound-URL setting belongs here (or, if it
# must be reachable on the public internet, on the stricter OIDC guard).
LAN_SERVICE_URL_SETTINGS = ("ha_url", "obico_ml_url", "orcaslicer_api_url", "bambu_studio_api_url")


class AppSettings(BaseModel):
    """Application settings schema."""

    auto_archive: bool = Field(default=True, description="Automatically archive prints when completed")
    save_thumbnails: bool = Field(default=True, description="Extract and save preview images from 3MF files")
    capture_finish_photo: bool = Field(
        default=True,
        description=(
            "Capture photo from printer camera when print completes. Bambuddy records a "
            "brief timelapse during the print so the photo can be sourced from the moment "
            "before the bed drops; the timelapse file is kept if you enabled timelapse for "
            "this print, otherwise it is deleted automatically after the photo is captured."
        ),
    )
    finish_photo_restore_plate: bool = Field(
        default=True,
        description=(
            "Raise the build plate back into camera framing before taking the finish photo. "
            "Bambu's end G-code drops the plate ~100mm as the last thing it does, leaving the "
            "finished print far below the camera's natural framing. Bambuddy moves it back to "
            "just above the last printed layer, takes the photo, then lowers it again. Skipped "
            "when the print height is unknown or another job is queued for the printer."
        ),
    )
    default_filament_cost: float = Field(default=25.0, description="Default filament cost per kg")
    currency: str = Field(default="USD", description="Currency for cost tracking")
    energy_cost_per_kwh: float = Field(default=0.15, description="Electricity cost per kWh for energy tracking")
    energy_tracking_mode: str = Field(
        default="total",
        description="Energy display mode on stats: 'print' shows sum of per-print energy, 'total' shows lifetime plug consumption",
    )

    # Spoolman integration
    spoolman_enabled: bool = Field(default=False, description="Enable Spoolman integration for filament tracking")
    spoolman_url: str = Field(default="", description="Spoolman server URL (e.g., http://localhost:7912)")
    spoolman_sync_mode: str = Field(
        default="auto", description="Sync mode: 'auto' syncs immediately, 'manual' requires button press"
    )
    spoolman_disable_weight_sync: bool = Field(
        default=False,
        description="Disable remaining_weight sync. When enabled, only location is updated for existing spools.",
    )
    spoolman_report_partial_usage: bool = Field(
        default=True,
        description="Report Partial Usage for Failed Prints. When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress.",
    )
    auto_add_unknown_rfid: bool = Field(
        default=True,
        description="Automatically add spools with unknown RFID tags to inventory. Disable if you pre-create inventory entries manually to avoid duplicates.",
    )
    disable_filament_warnings: bool = Field(
        default=False,
        description="Disable insufficient filament warnings when printing or queueing prints",
    )
    prefer_lowest_filament: bool = Field(
        default=False,
        description="When multiple AMS spools match, prefer the one with lowest remaining filament",
    )

    # Updates
    check_updates: bool = Field(default=True, description="Automatically check for updates on startup")
    check_printer_firmware: bool = Field(default=True, description="Check for printer firmware updates from Bambu Lab")
    include_beta_updates: bool = Field(default=False, description="Include beta/prerelease versions in update checks")

    # Language
    language: str = Field(default="en", description="UI language (en, de, fr, ja, it, pt-BR)")
    notification_language: str = Field(default="en", description="Language for push notifications (en, de)")

    # Bed cooled notification threshold
    bed_cooled_threshold: float = Field(
        default=35.0, description="Bed temperature threshold for cooled notification (°C)"
    )

    # AMS threshold settings for humidity and temperature coloring
    ams_humidity_good: int = Field(default=40, description="Humidity threshold for good (green): <= this value")
    ams_humidity_fair: int = Field(
        default=60, description="Humidity threshold for fair (orange): <= this value, > is red"
    )
    ams_temp_good: float = Field(default=28.0, description="Temperature threshold for good (blue): <= this value")
    ams_temp_fair: float = Field(
        default=35.0, description="Temperature threshold for fair (orange): <= this value, > is red"
    )
    ams_history_retention_days: int = Field(default=30, description="Number of days to keep AMS sensor history data")
    printer_sensor_history_retention_days: int = Field(
        default=30, description="Number of days to keep printer heater history data (nozzle / bed / chamber)"
    )

    # Queue auto-drying settings
    queue_drying_enabled: bool = Field(
        default=False, description="Automatically dry AMS filament between queued prints"
    )
    queue_drying_block: bool = Field(
        default=False,
        description="Block queue until drying completes (when disabled, prints take priority over drying)",
    )
    ambient_drying_enabled: bool = Field(
        default=False,
        description="Automatically dry AMS filament on idle printers when humidity exceeds threshold, regardless of queue",
    )
    print_drying_enabled: bool = Field(
        default=False,
        description=(
            "Allow auto-drying to also fire on a printer that is currently printing, "
            "when its model+firmware supports concurrent drying (H2D 01.03.00.00+, "
            "H2C/H2S/P2S/H2D Pro 01.02.00.00+, X2D/A2L 01.01.00.00+, X1C 01.11.02.00+). "
            "Drying temperature is automatically capped 5 degC below the idle preset "
            "(floor 40 degC) to protect spools during print."
        ),
    )
    drying_presets: str = Field(
        default="",
        description="JSON blob of drying presets per filament type (empty = use built-in defaults)",
    )
    ams_humidity_thresholds: str = Field(
        default="",
        description=(
            "JSON blob of per-filament-type humidity trigger thresholds for auto-drying and alarms. "
            'Shape: {"default": int, "PLA": int, "ASA": int, ...}. '
            "Empty = fall back to ams_humidity_fair for all types."
        ),
    )

    # Auto-print G-code injection (#422)
    gcode_snippets: str = Field(
        default="",
        description="JSON: per-model G-code injection snippets {model: {start_gcode, end_gcode}}",
    )

    # Scheduled local backup (#884)
    local_backup_enabled: bool = Field(default=False, description="Enable scheduled local backups")
    local_backup_schedule: str = Field(default="daily", description="Backup frequency: hourly, daily, weekly")
    local_backup_time: str = Field(default="03:00", description="Time of day for daily/weekly backups (HH:MM, 24h)")
    local_backup_retention: int = Field(default=5, description="Number of backup files to keep (1-100)")
    local_backup_path: str = Field(default="", description="Backup output directory (empty = DATA_DIR/backups)")

    # Print modal settings
    per_printer_mapping_expanded: bool = Field(
        default=False, description="Expand custom filament mapping by default in print modal"
    )

    # Date/time display format
    date_format: str = Field(default="system", description="Date format: system, us, eu, iso")
    time_format: str = Field(default="system", description="Time format: system, 12h, 24h")

    # Default printer for operations
    default_printer_id: int | None = Field(default=None, description="Default printer ID for uploads, reprints, etc.")

    # Slicer Pipelines (#1425 PR C). Cap on the ``copies`` field in the
    # Run-with-pipeline modal — keeps a misclick from queueing 5000 prints.
    pipeline_max_copies: int = Field(
        default=50,
        ge=1,
        le=1000,
        description="Upper bound on the copies an operator can request when running a Slicer Pipeline. Larger fleets / production rigs can raise this; the hard ceiling at 1000 is a sanity guard against fat-fingered input.",
    )

    # Virtual Printer
    virtual_printer_enabled: bool = Field(default=False, description="Enable virtual printer for slicer uploads")
    virtual_printer_access_code: str = Field(default="", description="Access code for virtual printer authentication")
    virtual_printer_mode: str = Field(
        default="archive",
        description="Mode: 'archive' (archive now), 'review' (pending review), 'queue' (add to print queue), or 'proxy' (relay to real printer)",
    )
    virtual_printer_archive_name_source: str = Field(
        default="metadata",
        description="Source for the archive's display name on virtual-printer uploads: 'metadata' uses the 3MF's embedded print_name (default, matches Bambu's behavior), 'filename' uses the filename Bambu Studio sent over FTP (lets users rename via the slicer's 'send to printer' dialog).",
    )

    # Dark mode theme settings
    dark_style: str = Field(default="vibrant", description="Dark mode style: classic, glow, vibrant")
    dark_background: str = Field(
        default="cool", description="Dark mode background: neutral, warm, cool, oled, slate, forest"
    )
    dark_accent: str = Field(default="green", description="Dark mode accent: green, teal, blue, orange, purple, red")

    # Light mode theme settings
    light_style: str = Field(default="classic", description="Light mode style: classic, glow, vibrant")
    light_background: str = Field(default="neutral", description="Light mode background: neutral, warm, cool")
    light_accent: str = Field(default="green", description="Light mode accent: green, teal, blue, orange, purple, red")

    # FTP retry settings for unreliable WiFi connections
    ftp_retry_enabled: bool = Field(default=True, description="Enable automatic retry for FTP operations")
    ftp_retry_count: int = Field(default=3, description="Number of retry attempts for FTP operations (1-10)")
    ftp_retry_delay: int = Field(default=2, description="Seconds to wait between FTP retry attempts (1-30)")
    ftp_timeout: int = Field(default=30, description="FTP connection timeout in seconds (10-300)")

    # MQTT Relay settings for publishing events to external broker
    mqtt_enabled: bool = Field(default=False, description="Enable MQTT event publishing to external broker")
    mqtt_broker: str = Field(default="", description="MQTT broker hostname or IP address")
    mqtt_port: int = Field(default=1883, description="MQTT broker port (default 1883, TLS typically 8883)")
    mqtt_username: str = Field(default="", description="MQTT username for authentication (optional)")
    mqtt_password: str = Field(default="", description="MQTT password for authentication (optional)")
    mqtt_topic_prefix: str = Field(default="bambuddy", description="Topic prefix for all published messages")
    mqtt_use_tls: bool = Field(default=False, description="Use TLS/SSL encryption for MQTT connection")

    # External URL for notifications
    external_url: str = Field(
        default="", description="External URL where Bambuddy is accessible (for notification images)"
    )

    # Home Assistant integration for smart plug control
    ha_enabled: bool = Field(default=False, description="Enable Home Assistant integration for smart plug control")
    ha_url: str = Field(default="", description="Home Assistant URL (e.g., http://192.168.1.100:8123)")
    ha_token: str = Field(default="", description="Home Assistant Long-Lived Access Token")
    ha_url_from_env: bool = Field(default=False, description="Whether HA URL is set via HA_URL environment variable")
    ha_token_from_env: bool = Field(
        default=False, description="Whether HA token is set via HA_TOKEN environment variable"
    )
    ha_env_managed: bool = Field(
        default=False, description="Whether HA integration is fully managed by environment variables"
    )

    # File Manager / Library settings
    library_archive_mode: str = Field(
        default="ask",
        description="When printing from File Manager, create archive entry: 'always', 'never', or 'ask'",
    )
    library_disk_warning_gb: float = Field(
        default=5.0,
        description="Show warning when free disk space falls below this threshold (GB)",
    )

    # Camera view settings
    camera_view_mode: str = Field(
        default="window",
        description="Camera view mode: 'window' opens in new browser window, 'embedded' shows overlay on main screen",
    )

    # Preferred slicer application (server-side / API sidecar slicer)
    preferred_slicer: str = Field(
        default="bambu_studio",
        description="Slicer used for the server-side API / sidecar: 'bambu_studio' or 'orcaslicer'",
    )
    # "Open in Slicer" desktop URI handler — independent of the API slicer so
    # a user can slice via the Bambu Studio sidecar but open files locally in
    # OrcaSlicer, or vice versa (#1329). None falls back to ``preferred_slicer``
    # so existing installs behave identically until someone changes it.
    open_in_slicer: str | None = Field(
        default=None,
        description=(
            "Desktop slicer for the 'Open in Slicer' button: 'bambu_studio' or "
            "'orcaslicer'. None inherits from preferred_slicer."
        ),
    )

    # Slicer dispatch mode: when True, "Slice" actions open the in-app
    # SliceModal and call the slicer-API sidecar. When False (default), they
    # hand off to the user's local desktop slicer via URI scheme — preserving
    # the original Bambuddy behavior for users who don't run a sidecar.
    use_slicer_api: bool = Field(
        default=False,
        description="Use the slicer-API sidecar for slicing instead of the desktop slicer URI scheme",
    )

    # Slicer-API sidecar base URLs. Per-installation, configured via the
    # Settings UI (the "Slicer" card). Empty string means "fall back to the
    # SLICER_API_URL / BAMBU_STUDIO_API_URL env vars" — which themselves
    # default to the docker-compose ports in core/config.py.
    orcaslicer_api_url: str = Field(
        default="",
        description="OrcaSlicer sidecar URL (e.g. http://localhost:3003). Empty falls back to the SLICER_API_URL env var.",
    )
    bambu_studio_api_url: str = Field(
        default="",
        description="BambuStudio sidecar URL (e.g. http://localhost:3001). Empty falls back to the BAMBU_STUDIO_API_URL env var.",
    )
    # How long to keep waiting on a slice that isn't finishing. Measured against
    # the sidecar's progress channel, not total elapsed time — a heavy model can
    # legitimately slice for half an hour, and a wall-clock ceiling cannot tell
    # that apart from a stalled one (#2730). Sidecars too old to report progress
    # fall back to using this as a total-elapsed ceiling, which is the pre-#2730
    # behaviour with a configurable number.
    slicer_stall_timeout_minutes: int = Field(
        default=15,
        ge=1,
        le=240,
        description=(
            "Give up on a slice after this many minutes with no progress from the sidecar. "
            "On sidecars that do not report progress, applies to total slicing time instead."
        ),
    )

    # Prometheus metrics endpoint
    prometheus_enabled: bool = Field(default=False, description="Enable Prometheus metrics endpoint at /metrics")
    prometheus_token: str = Field(
        default="", description="Bearer token for Prometheus metrics authentication (optional)"
    )

    # Inventory low stock threshold
    low_stock_threshold: float = Field(
        default=20.0,
        ge=0.1,
        le=99.9,
        description="Low stock threshold percentage (%) for inventory filtering and display",
    )

    # Session policy (#1706) — admin-set ceiling for user session lifetime.
    # Default 24h preserves the M-2 audit reduction from 7 days. Max 720h
    # (30 days) bounds blast radius if an admin chooses a long session.
    session_max_hours: int = Field(
        default=24,
        ge=1,
        le=720,
        description=(
            "Maximum session lifetime in hours for user logins (default 24, max 720). "
            "Applies to new logins only; already-issued tokens keep their original expiry. "
            "Longer sessions reduce automatic logout protection."
        ),
    )

    # User email notifications (requires Advanced Authentication)
    user_notifications_enabled: bool = Field(
        default=True,
        description="Enable user email notifications for print job events (requires Advanced Authentication)",
    )

    # Default print options. bed_levelling / flow_cali / nozzle_offset_cali are
    # tri-state (off/on/auto), defaulting to "auto" per BambuStudio.
    default_bed_levelling: TriState = Field(default="auto", description="Default bed levelling option for new prints")
    default_flow_cali: TriState = Field(default="auto", description="Default flow calibration option for new prints")
    default_vibration_cali: bool = Field(
        default=True, description="Default vibration calibration option for new prints"
    )
    default_layer_inspect: bool = Field(
        default=False, description="Default first layer inspection option for new prints"
    )
    default_timelapse: bool = Field(default=False, description="Default timelapse option for new prints")
    default_nozzle_offset_cali: TriState = Field(
        default="auto",
        description="Default nozzle offset calibration option for new prints (dual-nozzle printers only)",
    )

    # Staggered batch start for multi-printer jobs
    stagger_group_size: int = Field(
        default=2, ge=1, le=50, description="Number of printers to start simultaneously in staggered mode"
    )
    stagger_interval_minutes: int = Field(
        default=5, ge=1, le=60, description="Minutes between staggered printer groups"
    )

    # Plate-clear confirmation for queue scheduling
    require_plate_clear: bool = Field(
        default=False,
        description="Require per-printer plate-clear confirmation before starting queued prints on finished printers",
    )
    queue_shortest_first: bool = Field(
        default=False,
        description="Shortest Job First — scheduler prioritizes shorter print jobs over longer ones",
    )
    queue_max_concurrent_uploads: int = Field(
        default=4,
        ge=1,
        le=16,
        description=(
            "How many printers the queue may upload to at the same time. Printers are independent "
            "machines, so raising this starts a multi-printer batch proportionally sooner; each "
            "concurrent upload costs one connection and one thread on the Bambuddy host."
        ),
    )

    # Preheat / heat-soak before queued prints (#1468). The scheduler stage runs
    # BEFORE FTP upload. Three hardware tiers behave differently:
    #   - Chamber heater (H2C/H2D/H2DPro/H2S/X2D/X1E): M141 → wait for chamber
    #     sensor to reach target → soak
    #   - Chamber sensor only (X1C/P2S): M140 only → wait for radiant chamber
    #     warm-up to reach target OR max-wait timeout → soak
    #   - No chamber sensor (P1S/P1P/A1/A1 Mini): M140 only → fixed soak timer
    #     (no way to verify chamber temp; relies entirely on max_wait + soak)
    # Chamber target derives per-print from the loaded AMS filament types via
    # preheat_filament_targets (max across loaded slots). A target of 0 skips
    # the chamber phase but keeps the bed phase + soak. Per-queue-item
    # `preheat_chamber_target_override` (nullable) bypasses the derivation.
    preheat_enabled: bool = Field(
        default=False,
        description="Master toggle / default for new queue items. Per-item preheat_override can flip the decision per print.",
    )
    preheat_filament_targets: str = Field(
        default="",
        description=(
            "JSON map of normalized filament type → chamber target °C. Empty = bundled defaults "
            "(PLA/PETG/TPU/PVA: 0, PETG-CF: 40, ABS/ASA: 45, PA/PC/PC-FR: 50, PA-CF: 55, default: 0). "
            "Scheduler picks max across loaded AMS slots; 0 disables chamber phase for that print."
        ),
    )
    preheat_max_wait_seconds: int = Field(
        default=900,
        ge=60,
        le=3600,
        description="Maximum time to wait for the chamber to reach the target before falling through to the soak phase (radiant heating on X1C/P2S can take 15-30 min).",
    )
    preheat_soak_seconds: int = Field(
        default=300,
        ge=0,
        le=1800,
        description="Additional hold time at temperature after the chamber reaches the target (or after max_wait_seconds elapses). 0 = no soak.",
    )

    # User-configurable presets for the printer-card temperature / fan-speed
    # popovers. Each is a JSON array of exactly 3 ints (the "Off" button is
    # rendered separately and is not configurable). Empty string = use built-in
    # defaults. Validators on AppSettingsUpdate enforce the shape on writes.
    nozzle_temp_presets: str = Field(
        default="",
        description="JSON array of 3 nozzle-temperature preset values in C (0-320). Empty = use defaults [120, 220, 260]",
    )
    bed_temp_presets: str = Field(
        default="",
        description="JSON array of 3 bed-temperature preset values in C (0-140). Empty = use defaults [55, 75, 90]",
    )
    chamber_temp_presets: str = Field(
        default="",
        description="JSON array of 3 chamber-temperature preset values in C (0-60). Empty = use defaults [35, 45, 60]",
    )
    fan_speed_presets: str = Field(
        default="",
        description="JSON array of 3 fan-speed preset values in % (0-100). Empty = use defaults [50, 75, 100]",
    )

    # Local login (#1589) — when False, /auth/login rejects username+password
    # credentials with HTTP 403 and the login page hides the credentials form,
    # leaving only the OIDC SSO provider buttons. LDAP is governed by its own
    # `ldap_enabled` toggle and is not affected. The env-var
    # ``BAMBUDDY_LOCAL_LOGIN=true`` bypasses this gate at the route level so a
    # server admin can recover an install whose SSO provider is unreachable
    # without editing the DB.
    local_login_enabled: bool = Field(
        default=True,
        description=(
            "Allow username + password login on /auth/login. Disable when only SSO should be usable. "
            "BAMBUDDY_LOCAL_LOGIN=true on the server overrides this to keep a recovery path open."
        ),
    )

    # LDAP authentication (#794)
    ldap_enabled: bool = Field(default=False, description="Enable LDAP authentication")
    ldap_server_url: str = Field(default="", description="LDAP server URL (e.g., ldap://ldap.example.com:389)")
    ldap_bind_dn: str = Field(default="", description="Bind DN for LDAP searches (e.g., cn=admin,dc=example,dc=com)")
    ldap_bind_password: str = Field(default="", description="Bind password for LDAP searches")
    ldap_search_base: str = Field(default="", description="Search base DN (e.g., ou=users,dc=example,dc=com)")
    ldap_user_filter: str = Field(
        default="(sAMAccountName={username})",
        description="LDAP user search filter. {username} is replaced with the login username",
    )
    ldap_security: str = Field(default="starttls", description="LDAP security: 'starttls' or 'ldaps'")
    ldap_group_mapping: str = Field(
        default="",
        description="JSON: LDAP group to BamBuddy group mapping {ldap_group_dn: bambuddy_group_name}",
    )
    ldap_auto_provision: bool = Field(
        default=False,
        description="Auto-create BamBuddy user on first successful LDAP login",
    )
    ldap_default_group: str = Field(
        default="",
        description="Fallback BamBuddy group name assigned when an LDAP user authenticates but has no mapped groups. Empty = no fallback.",
    )

    # Obico AI failure detection (#172)
    obico_enabled: bool = Field(default=False, description="Enable Obico AI print failure detection")
    obico_ml_url: str = Field(
        default="",
        description="Self-hosted Obico ML API base URL (e.g., http://192.168.1.10:3333)",
    )
    obico_ml_token: str = Field(
        default="",
        description=(
            "Bearer token for the Obico ML API, matching the server's ML_API_TOKEN "
            "environment variable. Empty when the server runs without one."
        ),
    )
    obico_sensitivity: str = Field(
        default="medium",
        description="Detection sensitivity: 'low', 'medium', or 'high' (adjusts LOW/HIGH thresholds)",
    )
    obico_action: str = Field(
        default="notify",
        description="Action on detected failure: 'notify', 'pause', or 'pause_and_off'",
    )
    obico_poll_interval: int = Field(
        default=10,
        ge=5,
        le=120,
        description="Seconds between detection checks while a print is running",
    )
    obico_enabled_printers: str = Field(
        default="",
        description="JSON array of printer IDs to monitor (empty = all connected printers)",
    )

    # Inventory forecasting
    forecast_global_lead_time_days: int = Field(
        default=0,
        ge=0,
        description="Global lead time floor (days) used in reorder point calculation for all SKUs",
    )

    # Default sidebar order (admin-set for all users)
    default_sidebar_order: str = Field(
        default="",
        description="JSON object with 'order' key containing array of sidebar item IDs (empty = no default)",
    )


class AppSettingsUpdate(BaseModel):
    """Schema for updating settings (all fields optional)."""

    auto_archive: bool | None = None
    save_thumbnails: bool | None = None
    capture_finish_photo: bool | None = None
    finish_photo_restore_plate: bool | None = None
    default_filament_cost: float | None = None
    currency: str | None = None
    energy_cost_per_kwh: float | None = None
    energy_tracking_mode: str | None = None
    spoolman_enabled: bool | None = None
    spoolman_url: str | None = None
    spoolman_sync_mode: str | None = None
    spoolman_disable_weight_sync: bool | None = None
    spoolman_report_partial_usage: bool | None = None
    auto_add_unknown_rfid: bool | None = None
    disable_filament_warnings: bool | None = None
    prefer_lowest_filament: bool | None = None
    check_updates: bool | None = None
    check_printer_firmware: bool | None = None
    include_beta_updates: bool | None = None
    local_login_enabled: bool | None = None
    language: str | None = None
    notification_language: str | None = None
    bed_cooled_threshold: float | None = None
    ams_humidity_good: int | None = None
    ams_humidity_fair: int | None = None
    ams_temp_good: float | None = None
    ams_temp_fair: float | None = None
    ams_history_retention_days: int | None = None
    printer_sensor_history_retention_days: int | None = None
    queue_drying_enabled: bool | None = None
    queue_drying_block: bool | None = None
    ambient_drying_enabled: bool | None = None
    print_drying_enabled: bool | None = None
    drying_presets: str | None = None
    ams_humidity_thresholds: str | None = None
    per_printer_mapping_expanded: bool | None = None
    date_format: str | None = None
    time_format: str | None = None
    default_printer_id: int | None = None
    pipeline_max_copies: int | None = None
    virtual_printer_enabled: bool | None = None
    virtual_printer_access_code: str | None = None
    virtual_printer_mode: str | None = None
    virtual_printer_archive_name_source: str | None = None
    dark_style: str | None = None
    dark_background: str | None = None
    dark_accent: str | None = None
    light_style: str | None = None
    light_background: str | None = None
    light_accent: str | None = None
    ftp_retry_enabled: bool | None = None
    ftp_retry_count: int | None = None
    ftp_retry_delay: int | None = None
    ftp_timeout: int | None = None
    mqtt_enabled: bool | None = None
    mqtt_broker: str | None = None
    mqtt_port: int | None = None
    mqtt_username: str | None = None
    mqtt_password: str | None = None
    mqtt_topic_prefix: str | None = None
    mqtt_use_tls: bool | None = None
    external_url: str | None = None
    ha_enabled: bool | None = None
    ha_url: str | None = None
    ha_token: str | None = None
    library_archive_mode: str | None = None
    library_disk_warning_gb: float | None = None
    camera_view_mode: str | None = None
    preferred_slicer: str | None = None
    open_in_slicer: str | None = None
    use_slicer_api: bool | None = None
    orcaslicer_api_url: str | None = None
    bambu_studio_api_url: str | None = None
    slicer_stall_timeout_minutes: int | None = Field(default=None, ge=1, le=240)
    prometheus_enabled: bool | None = None
    prometheus_token: str | None = None
    low_stock_threshold: float | None = Field(default=None, ge=0.1, le=99.9)
    session_max_hours: int | None = Field(default=None, ge=1, le=720)
    user_notifications_enabled: bool | None = None
    default_bed_levelling: TriState | None = None
    default_flow_cali: TriState | None = None
    default_vibration_cali: bool | None = None
    default_layer_inspect: bool | None = None
    default_timelapse: bool | None = None
    default_nozzle_offset_cali: TriState | None = None
    stagger_group_size: int | None = Field(default=None, ge=1, le=50)
    stagger_interval_minutes: int | None = Field(default=None, ge=1, le=60)
    require_plate_clear: bool | None = None
    queue_shortest_first: bool | None = None
    queue_max_concurrent_uploads: int | None = Field(default=None, ge=1, le=16)
    preheat_enabled: bool | None = None
    preheat_filament_targets: str | None = None
    preheat_max_wait_seconds: int | None = Field(default=None, ge=60, le=3600)
    preheat_soak_seconds: int | None = Field(default=None, ge=0, le=1800)
    nozzle_temp_presets: str | None = None
    bed_temp_presets: str | None = None
    chamber_temp_presets: str | None = None
    fan_speed_presets: str | None = None
    gcode_snippets: str | None = None
    local_backup_enabled: bool | None = None
    local_backup_schedule: str | None = None
    local_backup_time: str | None = None
    local_backup_retention: int | None = None
    local_backup_path: str | None = None
    ldap_enabled: bool | None = None
    ldap_server_url: str | None = None
    ldap_bind_dn: str | None = None
    ldap_bind_password: str | None = None
    ldap_search_base: str | None = None
    ldap_user_filter: str | None = None
    ldap_security: str | None = None
    ldap_group_mapping: str | None = None
    ldap_auto_provision: bool | None = None
    ldap_default_group: str | None = None
    obico_enabled: bool | None = None
    obico_ml_url: str | None = None
    obico_ml_token: str | None = None
    obico_sensitivity: str | None = None
    obico_action: str | None = None
    obico_poll_interval: int | None = Field(default=None, ge=5, le=120)
    obico_enabled_printers: str | None = None
    default_sidebar_order: str | None = None
    forecast_global_lead_time_days: int | None = Field(default=None, ge=0)

    @field_validator(*LAN_SERVICE_URL_SETTINGS)
    @classmethod
    def validate_lan_service_url(cls, v: str | None, info: ValidationInfo) -> str | None:
        """Reject SSRF-unsafe outbound service URLs on save.

        Empty (and whitespace-only) is the documented "not configured / fall
        back to the env var" value for all four fields and must keep passing.

        Values that are not absolute URLs at all ("192.168.1.10:3333",
        "localhost:3333") are left alone rather than rejected. Two reasons:

        - They are inert. Every consumer of these four settings goes through
          httpx, which raises UnsupportedProtocol for a URL with no scheme, so
          no request is ever issued and there is nothing to guard against.
        - They were storable before this validator existed, and the settings
          UI is a plain text input with no scheme enforcement. Newly rejecting
          them would break saves that have nothing to do with the URL: the
          Obico panel, for one, sends obico_ml_url with every change and
          auto-saves, so one legacy value would block toggling detection on or
          off. A pre-existing misconfiguration should keep failing where it
          already failed (at request time), not spread to unrelated fields.

        ``urlparse`` is no help in telling the two apart — it reads
        "localhost:3333" as scheme "localhost" — so the test is the literal
        "://" that makes a string an absolute URL.
        """
        if v is None or not v.strip():
            return v
        candidate = v.strip()
        if "://" not in candidate:
            return v
        # Lazy-imported: schemas avoid top-level imports from api/routes,
        # matching the existing pattern in auth.py's _validate_icon_url.
        from backend.app.api.routes._url_safety import assert_safe_lan_service_url

        try:
            assert_safe_lan_service_url(candidate, label=info.field_name or "URL")
        except ValueError as exc:
            raise ValueError(str(exc)) from exc
        return v

    @field_validator("gcode_snippets")
    @classmethod
    def validate_gcode_snippets(cls, v: str | None) -> str | None:
        if v is None or v == "":
            return v
        try:
            parsed = json.loads(v)
        except json.JSONDecodeError:
            raise ValueError("gcode_snippets must be valid JSON or empty")
        if not isinstance(parsed, dict):
            raise ValueError("gcode_snippets must be a JSON object keyed by printer model")
        return v

    @field_validator("ldap_group_mapping")
    @classmethod
    def validate_ldap_group_mapping(cls, v: str | None) -> str | None:
        if v is None or v == "":
            return v
        try:
            parsed = json.loads(v)
        except json.JSONDecodeError:
            raise ValueError("ldap_group_mapping must be valid JSON or empty")
        if not isinstance(parsed, dict):
            raise ValueError("ldap_group_mapping must be a JSON object mapping LDAP group DNs to BamBuddy group names")
        return v

    @field_validator("obico_enabled_printers")
    @classmethod
    def validate_obico_enabled_printers(cls, v: str | None) -> str | None:
        if v is None or v == "":
            return v
        try:
            parsed = json.loads(v)
        except json.JSONDecodeError:
            raise ValueError("obico_enabled_printers must be valid JSON or empty")
        if not isinstance(parsed, list) or not all(isinstance(item, int) for item in parsed):
            raise ValueError("obico_enabled_printers must be a JSON array of printer IDs (integers)")
        return v

    @staticmethod
    def _validate_preset_triple(v: str | None, field_name: str, lo: int, hi: int) -> str | None:
        """Validate a JSON array of exactly 3 ints in [lo, hi]. Empty = defaults."""
        if v is None or v == "":
            return v
        try:
            parsed = json.loads(v)
        except json.JSONDecodeError:
            raise ValueError(f"{field_name} must be valid JSON or empty")
        if not isinstance(parsed, list) or len(parsed) != 3:
            raise ValueError(f"{field_name} must be a JSON array of exactly 3 integers")
        if not all(isinstance(item, int) and not isinstance(item, bool) for item in parsed):
            raise ValueError(f"{field_name} entries must all be integers")
        if not all(lo <= item <= hi for item in parsed):
            raise ValueError(f"{field_name} entries must each be in [{lo}, {hi}]")
        return v

    @field_validator("nozzle_temp_presets")
    @classmethod
    def validate_nozzle_temp_presets(cls, v: str | None) -> str | None:
        return cls._validate_preset_triple(v, "nozzle_temp_presets", 0, 320)

    @field_validator("bed_temp_presets")
    @classmethod
    def validate_bed_temp_presets(cls, v: str | None) -> str | None:
        return cls._validate_preset_triple(v, "bed_temp_presets", 0, 140)

    @field_validator("chamber_temp_presets")
    @classmethod
    def validate_chamber_temp_presets(cls, v: str | None) -> str | None:
        return cls._validate_preset_triple(v, "chamber_temp_presets", 0, 60)

    @field_validator("fan_speed_presets")
    @classmethod
    def validate_fan_speed_presets(cls, v: str | None) -> str | None:
        return cls._validate_preset_triple(v, "fan_speed_presets", 0, 100)

    @field_validator("obico_sensitivity")
    @classmethod
    def validate_obico_sensitivity(cls, v: str | None) -> str | None:
        if v is None:
            return v
        if v not in ("low", "medium", "high"):
            raise ValueError("obico_sensitivity must be 'low', 'medium', or 'high'")
        return v

    @field_validator("obico_action")
    @classmethod
    def validate_obico_action(cls, v: str | None) -> str | None:
        if v is None:
            return v
        if v not in ("notify", "pause", "pause_and_off"):
            raise ValueError("obico_action must be 'notify', 'pause', or 'pause_and_off'")
        return v

    @field_validator("default_sidebar_order")
    @classmethod
    def validate_default_sidebar_order(cls, v: str | None) -> str | None:
        if v is None or v == "":
            return v
        try:
            parsed = json.loads(v)
        except json.JSONDecodeError:
            raise ValueError("default_sidebar_order must be valid JSON or empty")
        if isinstance(parsed, dict):
            order = parsed.get("order")
            hidden_system_item_ids = parsed.get("hiddenSystemItemIds", [])
            if not isinstance(hidden_system_item_ids, list) or not all(
                isinstance(item, str) for item in hidden_system_item_ids
            ):
                raise ValueError("sidebar hidden system item IDs must be an array of strings")
        elif isinstance(parsed, list):
            order = parsed
        else:
            raise ValueError("default_sidebar_order must be a JSON object with 'order' key or a JSON array")
        if not isinstance(order, list) or not all(isinstance(item, str) for item in order):
            raise ValueError("sidebar order must be an array of strings")
        return v