maziggy a4cfbd4212 fix(archives): come back for a 3MF whose transfer ran out of time (issue #3063) ...

The reporter's P1S had the sliced file on its card and was serving it. The 19MB
transfer just did not finish inside the budget while the printer was also running
its camera, its status messages and the upload of the job itself. Bambuddy wrote
an empty fallback archive and never looked again -- then downloaded that same file
successfully three times over the next two minutes and discarded every copy,
because the only code that would have attached one had already run.

The recovery machinery was there. It was armed for exactly one give-up, the FTPS
cool-off, on the grounds that the three storage verdicts are settled: a job on
internal eMMC never appears at any FTPS path, and sweeping for it again is what
where the file is demonstrably still on the card.

The sweep already had the signal and never used it. A file that is genuinely not
there is answered with 550, which surfaces as FileNotOnPrinterError and is caught
by name; a timeout returns falsy instead. So "the printer says no such file" and
"we never got a straight answer" are distinguishable without guessing, and only
the second schedules anything.

Not scheduled either for a 3MF that downloaded fine and turned out to be another
plate's. Recovery checks that a candidate is a readable 3MF but not which plate it
holds, and the names a retry would use are the same stale ones that fetched the
contradicted file -- so it would put back exactly what #2957 discards.

The ladder follows the cause: a cool-off has to expire, so its first attempt sits
past the 300s; nothing has to expire here, and this reporter's file completed 48
seconds after the budget was spent.

The archives banner gets its own wording for this, because the old text sends an
owner whose card is working to switch on a setting that is already on. It names
the Connection Timeout setting instead.

2026-09-18 13:38:02 +02:00

..

core

Keep the RTSPS proxy's handler set off the server object (issue #3001)

2026-08-30 08:01:42 +02:00

services

fix(ams): stop reading the printer's command acks as status (issue #3040)

2026-09-16 09:52:24 +02:00

utils

Let a filled or foamed filament keep its own name (issue #2902)

2026-08-23 10:36:50 +02:00

__init__.py

…

test_3mf_fallback_matching.py

Stop a print with no 3MF borrowing another model's data (#2843)

2026-08-17 09:26:13 +02:00

test_a2l_ams_lite_2619.py

fix(vp): relay A2L AMS filament to the slicer instead of blanking every slot

2026-07-29 08:40:42 +02:00

test_accessory_plug_queue_stall_2629.py

fix(smart-plugs): don't blank printer state when an accessory plug switches off (#2629)

2026-07-22 09:57:27 +02:00

test_ams_alarm_gating.py

Give the AMS temperature alarm its own threshold (issue #2905) (#2943)

2026-08-25 15:03:34 +02:00

test_ams_assignment_lock.py

…

test_ams_mapping_unresolved_2589.py

fix(filament): don't dispatch an unresolved AMS mapping to the external spool (#2589)

2026-07-18 08:11:44 +02:00

test_ams_slot_location_cleanup.py

Stop offering AMS slots as places to store a spool

2026-08-23 15:17:09 +02:00

test_ams_temp_alarm_dispatch_2905.py

Give the AMS temperature alarm its own threshold (issue #2905) (#2943)

2026-08-25 15:03:34 +02:00

test_ams_tray_tar_parse_2587.py

feat(ams): name the expected slot when a paused print hits an AMS runout (#2587)

2026-07-18 13:06:01 +02:00

test_archive_bed_temperature_2989.py

Read the bed temperature from the plate the project is sliced for (issue #2989)

2026-08-28 14:26:34 +02:00

test_archive_delete_no_3mf_dirs_2968.py

Log ffmpeg's error instead of its build banner

2026-08-29 08:51:33 +02:00

test_archive_file_path_guard.py

…

test_archive_filtering.py

Stop a print with no 3MF borrowing another model's data (#2843)

2026-08-17 09:26:13 +02:00

test_archive_plate_2603.py

fix(queue): persist selected plate to the archive; reconcile archive on offline stop (#2603)

2026-07-19 09:29:54 +02:00

test_archive_run_aggregation.py

fix(archives): #1608 suppress card time-accuracy badge for multi-run archives

2026-06-03 10:14:57 +02:00

test_assign_uses_model_preset_override.py

Configure a spool's filament preset and K profile per nozzle

2026-08-27 13:03:15 +02:00

test_assignment_verification_2582.py

feat(ams): confirm spool assignments landed instead of fire-and-forget (#2582)

2026-07-21 08:46:02 +02:00

test_asyncio_handlers.py

…

test_auth_fail_closed.py

fix(security): GHSA-6mf4-q26m-47pv — fail-closed on auth-probe DB errors (CVSS 9.8)

2026-05-30 13:49:09 +02:00

test_bambu_mqtt_cfg_parse.py

feat(ams-backup): add status badge + toggle, fix prefer-lowest (#1766)

2026-06-20 12:07:20 +02:00

test_bed_jog.py

fix(jog): stop disabling firmware endstops; warn that limits aren't enforced (#2579)

2026-07-16 15:21:47 +02:00

test_bed_temperature_backfill_2989.py

Repair the bed temperature on archives written before the fix (issue #2989)

2026-08-29 09:23:48 +02:00

test_billing_run_id_migration.py

Three fixes on top of the billing branch, all found by running the suite against

2026-08-08 11:19:33 +02:00

test_bug_report.py

…

test_bulk_spool_create.py

…

test_bundled_compatible_printers_2982.py

Match slicer presets on what they declare, not what they are named (issue #2982)

2026-08-28 10:30:32 +02:00

test_camera_ffmpeg_termination.py

fix(camera): drain ffmpeg's pipes during teardown (#NNNN)

2026-07-30 10:31:22 +02:00

test_camera_stderr_summary.py

…

test_camera_stderr_tail.py

fix(camera): drain a streaming ffmpeg's stderr continuously (#2707)

2026-07-30 12:52:11 +02:00

test_camera_stream_registry_isolation.py

fix(camera): one registry key per stream, not per printer (issue #2707)

2026-07-30 12:35:27 +02:00

test_camera_usb_stream_cleanup.py

fix(camera): drain ffmpeg's pipes during teardown (#NNNN)

2026-07-30 10:31:22 +02:00

test_cancellation_cascade_recovery_migration.py

fix(queue): cancelled prints no longer block require_previous_success chain (#1667)

2026-06-06 13:40:56 +02:00

test_cancelled_pool_filter.py

…

test_capture_pid_tracking.py

…

test_catalog_bulk_delete.py

…

test_chamber_temp_ceiling.py

Raise the chamber-temperature ceiling from 60 to 65 C

2026-08-03 08:52:23 +02:00

test_check_previous_success.py

fix(queue): close #1818 — Resume after failure clears the gate

2026-06-25 09:00:57 +02:00

test_cli.py

…

test_cloud_captcha_2790.py

Explain Bambu Cloud's CAPTCHA challenge instead of repeating it (#2790)

2026-08-08 10:04:55 +02:00

test_cloud_token_expiry.py

fix(cloud): only sign out on Bambu's real token-expiry 401, not any 401

2026-07-21 07:26:19 +02:00

test_cloud_totp_csrf.py

fix(cloud): complete the CSRF handshake on Bambu Cloud TOTP sign-in (#2696)

2026-07-28 15:05:28 +02:00

test_code_quality.py

fix(test): stop sys.modules-deleting backend.app.main in test_code_quality

2026-05-24 12:51:24 +02:00

test_color_utils.py

Let a clear spool stay clear on the way to Spoolman (issue #2912) (#2924)

2026-08-25 13:45:57 +02:00

test_completion_queue_item_match.py

Do not close a queue item on a completion for another print

2026-08-11 12:50:42 +02:00

test_completion_subtask_match_2829.py

Match a print completion to its queue job the way the printer names it (#2829)

2026-08-14 14:26:30 +02:00

test_compose_dir_setting.py

Show the compose directory in the Docker update command (#2664)

2026-08-03 15:12:02 +02:00

test_config_env_warnings.py

fix(queue): withdraw an expected print when the command never goes out

2026-07-30 16:31:09 +02:00

test_connection_watchdog.py

fix(printers): recover MQTT sessions that stopped reconnecting (#2732)

2026-07-31 14:28:17 +02:00

test_cost_tracking.py

…

test_cover_coalescing_2572.py

Restore the skip-objects list after a restart mid-print

2026-08-18 13:43:46 +02:00

test_cover_rechecks_3mf_cache_2957.py

Refuse a same-named 3MF that contradicts the running print (issue #2957)

2026-08-29 10:46:36 +02:00

test_db_dialect.py

…

test_db_pool_and_auth_cache.py

fix(db): configurable pool, auth_enabled cache, single-checkout auth (#2572)

2026-07-18 13:48:14 +02:00

test_db_session_timezone.py

Pin the PostgreSQL session to UTC so defaulted timestamps are UTC (#2855)

2026-08-17 08:05:02 +02:00

test_design_settings.py

Take the layer height from the plate that actually printed

2026-08-18 16:23:32 +02:00

test_diagnostic_snapshot.py

● feat(support): include sanitized connection / VP / log-health diagnostics in support bundle and bug report (#1506 follow-up)

2026-05-24 10:16:30 +02:00

test_dispatch_claim_recovery.py

fix(queue): withdraw an expected print when the command never goes out

2026-07-30 16:31:09 +02:00

test_donor_3mf_validation_2957.py

Refuse a same-named 3MF that contradicts the running print (issue #2957)

2026-08-29 10:46:36 +02:00

test_download_deadline_and_gate_2957.py

Refuse a same-named 3MF that contradicts the running print (issue #2957)

2026-08-29 10:46:36 +02:00

test_drying_preflight.py

Feature: Scheduled drying (#2703)

2026-08-15 13:40:21 +02:00

test_energy_plug_selection_2859.py

Use the printer's own plug for energy when several are linked (issue #2859)

2026-08-17 12:17:12 +02:00

test_energy_snapshots.py

…

test_expected_print_rollback.py

fix(queue): withdraw an expected print when the command never goes out

2026-07-30 16:31:09 +02:00

test_external_camera_live_frame_reuse.py

fix(camera): reuse the live view's frame for external-camera captures (#2707)

2026-07-30 13:05:15 +02:00

test_external_camera_ssrf.py

Security hardening (maziggy/bambuddy-security #9)

2026-08-05 15:21:42 +02:00

test_external_dispatch_detection.py

Recognise our own print dispatch instead of guessing at a magic number

2026-08-17 10:26:38 +02:00

test_extract_video_last_frame.py

fix(photo): source finish photo from forced timelapse + cleanup (#1397)

2026-06-05 13:53:26 +02:00

test_failure_reason_derivation.py

Store a failure reason in one vocabulary, not three (issue #2974)

2026-08-28 08:28:27 +02:00

test_fallback_3mf_transfer_retry_3063.py

fix(archives): come back for a 3MF whose transfer ran out of time (issue #3063)

2026-09-18 13:38:02 +02:00

test_fallback_archive_mqtt_filament.py

fix(archives): resolve raw_data wrapper in fallback-archive filament extraction (#1533 follow-up)

2026-05-29 10:55:41 +02:00

test_fallback_archive_recovery_2957.py

Fill in a fallback archive when the 3MF finally arrives (issue #2957)

2026-08-25 09:33:52 +02:00

test_fallback_timelapse_baseline_2957.py

Give a no-3MF archive the timelapse baseline it never took (issue #2957)

2026-08-27 08:37:35 +02:00

test_ffmpeg_output_summary.py

Log ffmpeg's error instead of its build banner

2026-08-29 08:51:33 +02:00

test_ffmpeg_rtsp_timeout_flag.py

fix(camera): probe ffmpeg for the right RTSP socket-timeout flag (#1504)

2026-05-24 08:49:21 +02:00

test_filament_colour_2977.py

Record the colour a slice is actually printed in (issue #2977)

2026-08-28 09:23:30 +02:00

test_filament_fields_options.py

fix(profiles): add PLA-CF + Bambu CF/GF/specialty variants to filament_type select (#1686)

2026-06-09 07:38:59 +02:00

test_filament_info_single_flight_2572.py

fix(db): release scheduler/cloud/cover sessions across slow I/O, add LIFO pool (#2572)

2026-07-18 16:15:09 +02:00

test_filament_type_equivalence.py

Rank near-colour matches by how they look, and share one filament type table (#2804)

2026-08-13 12:04:56 +02:00

test_filename_validation.py

fix(dispatch): align SD cleanup with upload path so doubled-extension library rows don't leave ghost prints (#1542)

2026-05-28 08:40:43 +02:00

test_finish_photo_from_timelapse.py

fix(camera): rotate every still exactly once, and cover the sources that let ffmpeg write the file

2026-07-31 09:30:06 +02:00

test_finish_photo_moment_sync.py

fix(camera): take the finish photo when the print ends, not when its last layer starts (#2547)

2026-07-31 12:55:05 +02:00

test_firmware_versions.py

fix(firmware-check): bypass Cloudflare TLS-fingerprint gate via curl_cffi (#1666)

2026-06-06 13:30:13 +02:00

test_force_color_plate_scope_migration.py

fix(queue): scope force-colour overrides to the plate the item prints (#2551)

2026-07-13 09:18:17 +02:00

test_fts_kprofile_routing.py

Track which nozzle each AMS feeds through the Filament Track Switch

2026-08-16 15:59:59 +02:00

test_gcode_injection.py

feat(gcode-injection): per-VP opt-in auto-print injection toggle (#1516) (#1656)

2026-06-19 11:29:07 +02:00

test_get_db_cancel_safety.py

…

test_git_providers_restore.py

fix(backup): stop Gitea's tree pager failing open on a missing total_count (#2656)

2026-08-04 08:57:34 -04:00

test_git_providers.py

Accept Forgejo tokens scoped to a single repository (#2775)

2026-08-06 12:08:36 +02:00

test_github_backup_cloud_profiles.py

fix(backup): collect cloud profiles from every connected account (#2717)

2026-07-31 16:59:33 +02:00

test_github_backup_schemas.py

…

test_github_restore.py

fix(backup): report the categories a failed restore already committed (#2656)

2026-08-06 08:46:02 +02:00

test_ha_sensor_alert_template_rename_migration_2824.py

[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)

2026-08-25 12:17:23 +02:00

test_ha_sensor_manager_1148.py

[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)

2026-08-25 12:17:23 +02:00

test_hms_description_surfaces.py

Carry a fault's description in the status response (issue #2926)

2026-08-24 09:47:39 +02:00

test_hms_error_summary.py

Carry a fault's description in the status response (issue #2926)

2026-08-24 09:47:39 +02:00

test_homeassistant_settings.py

…

test_http_utils.py

Add printer video downloads and range selection (#2853)

2026-08-22 13:22:56 +02:00

test_internal_printer_jobs.py

Skip the manual K calibration line as an internal printer job (issue #2957 follow-up)

2026-08-28 13:30:27 +02:00

test_internal_storage_probe_2856.py

Fill in a fallback archive when the 3MF finally arrives (issue #2957)

2026-08-25 09:33:52 +02:00

test_inventory_remain_endpoint.py

Name an AMS slot after the spool assigned to it

2026-08-27 16:04:41 +02:00

test_jti_revoked_session_reuse_2572.py

fix(db): configurable pool, auth_enabled cache, single-checkout auth (#2572)

2026-07-18 13:48:14 +02:00

test_launcher_shutdown_config.py

Replace the embedded G-code viewer with the slicer's own renderer

2026-08-09 14:10:18 +02:00

test_layer_timelapse_expected_archive.py

fix(camera): apply camera_rotation to layer-timelapse frames too

2026-07-30 17:34:13 +01:00

test_ldap_migration.py

…

test_library_classify_file_type.py

● fix(library): #1600 thumbnail extraction for external-folder .gcode.3mf

2026-06-02 14:51:08 +02:00

test_library_file_path_guard.py

…

test_library_file_type_backfill_migration.py

● fix(library): #1600 thumbnail extraction for external-folder .gcode.3mf

2026-06-02 14:51:08 +02:00

test_library_print_name.py

…

test_local_backup.py

fix(backup): diagnose an unwritable backup path instead of quoting errno 30 (#2544)

2026-07-12 08:44:53 +02:00

test_local_config.py

feat(system): NTP-gate state on /api/v1/system/appliance

2026-06-22 14:23:30 +02:00

test_location_ha_sensor_manager_2824.py

[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)

2026-08-25 12:17:23 +02:00

test_location_ha_sensor_unique_binding_migration_2824.py

[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)

2026-08-25 12:17:23 +02:00

test_location_migration.py

feat(inventory): structured storage locations catalog (#1505)

2026-06-17 11:33:23 +02:00

test_location_service.py

Stop offering AMS slots as places to store a spool

2026-08-23 15:17:09 +02:00

test_log_credential_redaction.py

Bound the scheme repetition in the log credential-redaction pattern. As an

2026-08-02 11:17:49 +02:00

test_log_error_detection.py

…

test_logging_filters.py

…

test_main_plug_rank_2830.py

Show the plug that powers the printer in the card's Power row (#2830)

2026-08-14 14:49:55 +02:00

test_maintenance_rod_filtering.py

…

test_makerworld_routes.py

fix(cloud): stop reporting an expired Bambu Cloud sign-in as connected (issue #2562)

2026-07-14 11:29:56 +02:00

test_makerworld_s3_tls.py

fix(cloud): stop reporting an expired Bambu Cloud sign-in as connected (issue #2562)

2026-07-14 11:29:56 +02:00

test_mfa_helpers.py

…

test_migration_error_classification_2949.py

Decide migration idempotency by SQLSTATE, not by English error text (issue #2949)

2026-08-25 07:55:49 +02:00

test_mqtt_debug_on_change.py

fix(queue): upload to printers in parallel, cap wedge retries, make debug logs survive a farm

2026-07-14 10:35:58 +02:00

test_natural_sort.py

[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)

2026-08-25 12:17:23 +02:00

test_nearest_colour_match_2804.py

Rank near-colour matches by how they look, and share one filament type table (#2804)

2026-08-13 12:04:56 +02:00

test_no_3mf_archive_paths.py

Stop a print with no 3MF borrowing another model's data (#2843)

2026-08-17 09:26:13 +02:00

test_no_fail_open_in_auth.py

fix(security): WebSocket auth gate + audit-driven hardening sweep

2026-06-02 10:02:17 +02:00

test_no_hardcoded_secrets.py

fix(security): WebSocket auth gate + audit-driven hardening sweep

2026-06-02 10:02:17 +02:00

test_no_unsafe_path_joins.py

fix(slicer-presets): #1581 SliceModal refresh + invalidate on local-profile delete/import

2026-06-02 12:42:16 +02:00

test_notification_plate_scope.py

fix(notifications): scope completion notification to printed plate on multi-plate 3MFs (#1785)

2026-06-20 08:28:44 +02:00

test_notification_template_sample_data.py

[Feature]: Bind Home Assistant sensors to storage locations (dryboxes/bins) (#2827)

2026-08-25 12:17:23 +02:00

test_nozzle_rack_mapping_2800.py

Print an H2C two-nozzle plate from the carriage it was levelled on

2026-08-14 09:18:55 +02:00

test_nozzle_rack_positions_1784.py

Choose which rack nozzle each filament prints from on an H2C (#1784)

2026-08-14 11:27:50 +02:00

test_obico_detection.py

Do not report a printer as Safe when nothing is checking it (issue #2952)

2026-08-25 08:49:24 +02:00

test_obico_smoothing.py

…

test_oidc_env_managed_migration.py

feat(oidc): add is_env_managed column to oidc_providers

2026-07-28 21:05:29 +00:00

test_oidc_env_provider.py

feat(oidc): add is_env_managed column to oidc_providers

2026-07-28 21:05:29 +00:00

test_oidc_env_reader.py

fix(oidc): strip the required BAMBUDDY_OIDC_* values and register the local-login bypass

2026-08-01 11:37:01 +02:00

test_oidc_icon_helpers.py

…

test_oidc_icon_migration_pg.py

…

test_oidc_icon_service.py

…

test_oidc_icon_validation.py

…

test_opentag3d.py

…

test_orca_cloud_refresh.py

fix(orca-cloud): close the HTTP client when an authenticated build fails

2026-09-07 10:39:10 +02:00

test_orca_profiles.py

…

test_orphan_auth_cleanup_migration.py

feat(auth): SSO autologin + disable local username/password login (#1589)

2026-06-25 14:54:27 +02:00

test_outbound_url_ssrf_guards.py

Suppress Bandit B104 false positive in the SSRF guard tests

2026-08-02 11:09:32 +02:00

test_perceptual_color_distance.py

Rank near-colour matches by how they look, and share one filament type table (#2804)

2026-08-13 12:04:56 +02:00

test_permissions_stats_filter.py

…

test_permissions.py

…

test_phantom_print_hardening.py

added tests for finance/cost center functionality

2026-06-24 11:01:16 +02:00

test_plate_clear_mqtt_notification.py

Release the plate-clear gate on a powered-down printer (issue #2864)

2026-08-18 09:34:03 +02:00

test_plate_gcode_selection.py

Open multi-plate G-code on the plate that was asked for

2026-08-11 11:49:30 +02:00

test_plate_object_extraction.py

…

test_plug_datetimes_are_naive_utc.py

fix(smart-plugs): read a REST plug's lifetime counter, and derive Today/Yesterday from it (issue #2539)

2026-07-11 14:22:31 +02:00

test_pool_fits_server.py

fix(queue): withdraw an expected print when the command never goes out

2026-07-30 16:31:09 +02:00

test_postgres_restore_drop_cascade.py

Drop the restore's foreign keys in the database, not in the ORM metadata

2026-08-10 16:48:10 +02:00

test_print_log_backfill_migration.py

…

test_print_log.py

Show the Print Log's per-run cost and energy, and let users pick columns (#2636)

2026-08-03 14:53:21 +02:00

test_print_speed.py

…

test_print_start_assigns_printer_id_to_vp_archive.py

…

test_print_start_expected_promotion.py

fix(usage): scope 3MF filament tracking to dispatched plate (#1697)

2026-06-09 09:16:36 +02:00

test_print_start_skips_unreachable_storage_2780.py

fix(archives): come back for a 3MF whose transfer ran out of time (issue #3063)

2026-09-18 13:38:02 +02:00

test_print_storage_2780.py

Read a print's destination from the report topic, not just the request one (issue #1820)

2026-08-25 11:19:46 +02:00

test_printer_kill_switch.py

Ask which nozzle to feed when a Filament Track Switch is fitted

2026-08-26 12:04:42 +02:00

test_printer_manager_status_broadcast.py

Ask which nozzle to feed when a Filament Track Switch is fitted

2026-08-26 12:04:42 +02:00

test_printer_manager_tray_carryover_2876.py

Stop waking printers that cannot print the queued job (issue #2876)

2026-08-19 08:26:43 +02:00

test_printer_media.py

Add printer video downloads and range selection (#2853)

2026-08-22 13:22:56 +02:00

test_printer_models.py

fix(kprofiles): stop reporting rejected K-profile writes as saved

2026-08-01 10:35:22 +02:00

test_printer_offline_notification.py

Ask which nozzle to feed when a Filament Track Switch is fitted

2026-08-26 12:04:42 +02:00

test_printer_schema.py

…

test_printer_sensor_history.py

feat(heater-history): track nozzle / bed / chamber readings + per-tile chart-icon overlay opens history modal

2026-06-20 12:55:24 +02:00

test_process_overrides.py

Edit the full print-parameter set from the slice dialog

2026-08-08 16:33:41 +02:00

test_project_settings_sentinel_sanitiser.py

fix(slicer): strip zero-valued filament-index sentinels, and sanitise the preview slice too (issue #3030)

2026-09-07 14:37:49 +02:00

test_pushover_priority.py

fix(notifications): send Pushover retry/expire for Emergency priority (#2586)

2026-07-17 10:02:19 +02:00

test_reconcile_stale_active_prints.py

fix(reconcile): don't synthesize aborted PRINT COMPLETE on the bare-connect edge before push_status arrives (#1679)

2026-06-08 08:18:13 +02:00

test_remain_delta_silence_1820.py

Repair no-3MF archives' photos and their silent filament writes (#1820)

2026-08-14 15:32:40 +02:00

test_report_topic_project_file_1820.py

Read a print's destination from the report topic, not just the request one (issue #1820)

2026-08-25 11:19:46 +02:00

test_reprint_clears_stale_timelapse.py

fix(notifications): reprint-from-archive sent original print's finish photo (#1707)

2026-06-11 09:23:03 +02:00

test_reprint_updates_subtask_id.py

fix(notifications): false-positive Print Stopped on reprint after MQTT reconnect (#1807)

2026-06-25 11:07:29 +02:00

test_request_topic_probe_2953.py

Charge the tray the printer said it used, not the first one loaded (issue #2953)

2026-08-25 16:22:43 +02:00

test_resolve_expected_tray_2587.py

feat(ams): name the expected slot when a paused print hits an AMS runout (#2587)

2026-07-18 13:06:01 +02:00

test_restore_sqlite_wal_safety.py

…

test_rfid_assign_picks_the_right_hotend.py

Key a K profile on its nozzle's flow type

2026-08-27 13:42:55 +02:00

test_rfid_core_weight_repair_2909.py

Draw a spool the way the AMS described it, and correct the tare it was added with

2026-08-23 14:25:45 +02:00

test_route_auth_coverage.py

Add printer video downloads and range selection (#2853)

2026-08-22 13:22:56 +02:00

test_run_filament_helper.py

fix(stats): scope per-run filament to the printed plate, not the whole 3MF (#2614)

2026-07-20 11:52:18 +02:00

test_run_filament_plate_scope_2614.py

fix(stats): scope per-run filament to the printed plate, not the whole 3MF (#2614)

2026-07-20 11:52:18 +02:00

test_run_with_retry.py

…

test_runtime_tracking_pause.py

fix(maintenance): paused prints no longer accumulate runtime hours (#1521)

2026-05-25 09:04:47 +02:00

test_safe_path.py

security: harden path-traversal class across routes + services; fifth CI backstop

2026-06-02 12:12:54 +02:00

test_scheduled_drying_model.py

Feature: Scheduled drying (#2703)

2026-08-15 13:40:21 +02:00

test_scheduled_drying_routes.py

Feature: Scheduled drying (#2703)

2026-08-15 13:40:21 +02:00

test_scheduled_drying_schema.py

Feature: Scheduled drying (#2703)

2026-08-15 13:40:21 +02:00

test_scheduler_ams_mapping.py

fix(scheduler): skip per-nozzle filter under FTS so dispatch feeds the right spool (#2186)

2026-07-07 12:17:46 +02:00

test_scheduler_auto_drying.py

Stop tearing down AMS drying for a print that cannot start (#2801)

2026-08-10 09:31:25 +02:00

test_scheduler_backup_gate.py

fix(scheduler): skip per-nozzle filter under FTS so dispatch feeds the right spool (#2186)

2026-07-07 12:17:46 +02:00

test_scheduler_busy_defer_2598.py

Let API keys read and run slicer pipelines (#1425 follow-up)

2026-08-15 10:38:51 +02:00

test_scheduler_busy_only.py

…

test_scheduler_busy_reasons_3018.py

fix(queue): say when an unscheduled item runs instead of calling it ASAP (issue #3018)

2026-09-07 12:22:26 +02:00

test_scheduler_cancel_race.py

Let API keys read and run slicer pipelines (#1425 follow-up)

2026-08-15 10:38:51 +02:00

test_scheduler_chamber_soak.py

feat(queue): keep the chamber warm between prints and skip redundant soak

2026-08-09 17:07:34 -04:00

test_scheduler_class_target_smart_plug_2786.py

Stop waking printers that cannot print the queued job (issue #2876)

2026-08-19 08:26:43 +02:00

test_scheduler_cleanup_library.py

Let API keys read and run slicer pipelines (#1425 follow-up)

2026-08-15 10:38:51 +02:00

test_scheduler_clear_plate.py

Feature: Scheduled drying (#2703)

2026-08-15 13:40:21 +02:00

test_scheduler_concurrent_dispatch.py

fix(queue): make upload concurrency a refillable pool, not a per-batch cap (#2602)

2026-07-19 08:34:38 +02:00

test_scheduler_cross_model_variants.py

Route external spools to a nozzle when the printer has no AMS (#2771)

2026-08-05 13:15:04 +02:00

test_scheduler_dispatch_hold.py

…

test_scheduler_drying_plate_hold_2801.py

Stop tearing down AMS drying for a print that cannot start (#2801)

2026-08-10 09:31:25 +02:00

test_scheduler_external_spool_nozzle_2771.py

Route external spools to a nozzle when the printer has no AMS (#2771)

2026-08-05 13:15:04 +02:00

test_scheduler_filament_deficit.py

fix(queue): persist "Print Anyway" so scheduler stops re-flagging it

2026-06-09 10:43:07 +02:00

test_scheduler_filament_override.py

…

test_scheduler_force_color_ams_fallback.py

fix(scheduler): pin the force-color variant when selecting the AMS slot (#2650)

2026-07-24 13:13:04 +02:00

test_scheduler_ha_interlock_1148.py

Show Home Assistant sensors on the printer card (#1148, #448)

2026-08-05 14:26:38 +02:00

test_scheduler_inventory_remain.py

fix(scheduler): use inventory weight for "Prefer Lowest Filament" sort (#1508)

2026-05-24 09:18:38 +02:00

test_scheduler_keep_warm.py

Release the keep-warm bed on the dispatch paths that skip the rollback (#2727)

2026-08-10 13:54:44 +02:00

test_scheduler_model_mismatch.py

fix(queue): enforce sliced-model compatibility on cross-model dispatch (#2578)

2026-07-17 06:51:51 +02:00

test_scheduler_nozzle_mismatch.py

Let a print start on a nozzle the printer can fetch (issue #2885)

2026-08-22 08:46:07 +02:00

test_scheduler_power_plug_pick_2629.py

fix(smart-plugs): don't blank printer state when an accessory plug switches off (#2629)

2026-07-22 09:57:27 +02:00

test_scheduler_preheat_ams_mapping_2886.py

Derive the chamber target from the trays the print loads (issue #2886)

2026-08-28 11:22:03 +02:00

test_scheduler_preheat_fast_path.py

feat(queue): keep the chamber warm between prints and skip redundant soak

2026-08-09 17:07:34 -04:00

test_scheduler_preheat.py

fix(queue): skip preheat entirely when no loaded filament wants a chamber (issue #3041)

2026-09-07 16:38:36 +02:00

test_scheduler_reassign_race_2615.py

fix(queue): claim a queue item before dispatch so it can't be reassigned mid-upload (#2615)

2026-07-20 12:30:39 +02:00

test_scheduler_release_conn_before_ftp_2572.py

Let API keys read and run slicer pipelines (#1425 follow-up)

2026-08-15 10:38:51 +02:00

test_scheduler_scheduled_drying_check_queue.py

Feature: Scheduled drying (#2703)

2026-08-15 13:40:21 +02:00

test_scheduler_scheduled_drying.py

Feature: Scheduled drying (#2703)

2026-08-15 13:40:21 +02:00

test_scheduler_watchdog.py

Say when AMS drying was running and a print never started (#2758)

2026-08-04 08:49:49 +02:00

test_settings_dedupe_migration.py

…

test_sidebar_settings.py

feat: Centralise sidebar ordering and add page visibility options (#1673)

2026-06-17 12:04:57 +02:00

test_skip_objects_survive_restart.py

Restore the skip-objects list after a restart mid-print

2026-08-18 13:43:46 +02:00

test_slice_backstop_wiring_2838.py

fix(profiles): read the companion files that hold a preset's real gcode

2026-08-15 11:37:01 +02:00

test_slice_external_folder_output.py

fix(slicer): write slice output to the source's external folder (#2810)

2026-08-11 09:02:52 +02:00

test_slice_output_check_2838.py

fix(profiles): read the companion files that hold a preset's real gcode

2026-08-15 11:37:01 +02:00

test_slice_output_name_2832.py

Build the slice output's path from a name a folder can have (#2832)

2026-08-14 16:02:53 +02:00

test_slice_process_support_patch.py

Let one checkbox say where a slice's settings come from (issue #2942)

2026-08-24 11:04:33 +02:00

test_slice_request_bed_type.py

…

test_slice_request_schema.py

Add auto-orient and auto-arrange to server-side slicing (#2548)

2026-08-03 14:10:02 +02:00

test_slice_unresolved_filament_2977.py

Record the colour a slice is actually printed in (issue #2977)

2026-08-28 09:23:30 +02:00

test_sliced_3mf_named_as_source_2993.py

Decide whether a 3MF is sliced by looking inside it (issue #2993)

2026-08-29 14:14:26 +02:00

test_sliced_3mf_reclassify_migration_2993.py

Decide whether a 3MF is sliced by looking inside it (issue #2993)

2026-08-29 14:14:26 +02:00

test_slicer_preset_values.py

Say why a preset's values are unavailable, not just that they are

2026-08-09 11:25:09 +02:00

test_slicer_presets.py

fix(slicer): classify filament profiles by their real printer scope, not just their name (#2628 follow-up)

2026-07-22 10:44:05 +02:00

test_slicer_settings.py

…

test_slicer_stall_timeout.py

fix(slicer): bound slices by silence, not by total slicing time (#2730)

2026-07-31 15:14:01 +02:00

test_slicer_upload_size_rejection.py

fix(slicer): name the sidecar service in the update command (#2802)

2026-08-11 08:35:23 +02:00

test_slot_nozzle_resolution.py

Key a K profile on its nozzle's flow type

2026-08-27 13:42:55 +02:00

test_slot_preset_key.py

…

test_smart_plug_power_flag_migration_2629.py

fix(smart-plugs): don't blank printer state when an accessory plug switches off (#2629)

2026-07-22 09:57:27 +02:00

test_spawn_patch_does_not_leak_coroutines.py

Let API keys read and run slicer pipelines (#1425 follow-up)

2026-08-15 10:38:51 +02:00

test_sponsor_prompt_service.py

test: silence Bandit B108 on hardcoded /tmp test-fixture paths

2026-06-28 13:52:05 +02:00

test_spool_filament_preset_cascade.py

Configure a spool's filament preset and K profile per nozzle

2026-08-27 13:03:15 +02:00

test_spool_schemas_colors.py

…

test_spool_schemas_rgba.py

…

test_spool_schemas_storage_location.py

…

test_spoolbuddy_schema_validation.py

…

test_spoolbuddy_ssh.py

…

test_spoolbuddy_system_stats.py

…

test_spoolman_clear_location.py

…

test_spoolman_extra_lock.py

…

test_spoolman_inventory_helpers.py

Let a clear spool stay clear on the way to Spoolman (issue #2912) (#2924)

2026-08-25 13:45:57 +02:00

test_spoolman_inventory_methods.py

feat(inventory): structured storage locations catalog (#1505)

2026-06-17 11:33:23 +02:00

test_spoolman_multi_colors_2967.py

Paint an AMS slot card with the spool's colours, not the tray's (issue #2967)

2026-08-28 09:46:37 +02:00

test_spoolman_no3mf_remain_fallback.py

Repair no-3MF archives' photos and their silent filament writes (#1820)

2026-08-14 15:32:40 +02:00

test_spoolman_settings_value_coercion.py

Security hardening (maziggy/bambuddy-security #7)

2026-07-30 13:52:56 +02:00

test_spoolman_slot_ddl.py

…

test_spoolman_stale_tag_cleanup.py

…

test_spoolman_tracking.py

fix(inventory): record the mapped spool's material, not the sliced type (#2563)

2026-07-15 07:29:16 +02:00

test_spoolman_tray_now_migration_1820.py

Repair no-3MF archives' photos and their silent filament writes (#1820)

2026-08-14 15:32:40 +02:00

test_ssrf_guard.py

…

test_status_broadcast_ams_slot_config.py

Ask which nozzle to feed when a Filament Track Switch is fitted

2026-08-26 12:04:42 +02:00

test_subtask_archive_resume.py

…

test_support_bundle_rotated_logs.py

fix(queue): upload to printers in parallel, cap wedge retries, make debug logs survive a farm

2026-07-14 10:35:58 +02:00

test_support_helpers.py

feat(support): record process memory, threads and children in bundles (#2734)

2026-07-31 15:32:08 +02:00

test_sync_ams_weights.py

…

test_systemd_backup_paths.py

Replace the embedded G-code viewer with the slicer's own renderer

2026-08-09 14:10:18 +02:00

test_telegram_forum_topic.py

feat(notifications): optional Telegram forum topic via message_thread_id (#1518)

2026-07-29 14:10:38 +02:00

test_temperature_fan_presets.py

Raise the chamber-temperature ceiling from 60 to 65 C

2026-08-03 08:52:23 +02:00

test_threemf_tools.py

Attribute filament correctly when AMS backup swaps spools mid-print

2026-08-13 08:37:16 +02:00

test_timelapse_baseline_restart_recovery.py

implemented pr feedback #2

2026-08-05 21:25:46 +02:00

test_timelapse_match.py

…

test_timelapse_scan_2704.py

fix(timelapse): poll longer, diff without a clock, delete once archived (#2704)

2026-07-29 11:51:30 +02:00

test_tls_proxy_teardown_2968.py

Keep the RTSPS proxy's handler set off the server object (issue #3001)

2026-08-30 08:01:42 +02:00

test_trace.py

…

test_unnamed_print_stage_logging.py

Report a print stage we cannot name at the default log level

2026-08-13 17:23:41 +02:00

test_upload_progress_bridge.py

feat(toast): restore upload-progress toast for scheduler dispatches (#1625 follow-up)

2026-06-27 11:28:00 +02:00

test_url_safety.py

…

test_usage_tracker_restart_recovery.py

Attribute filament correctly when AMS backup swaps spools mid-print

2026-08-13 08:37:16 +02:00

test_usage_tracker.py

Attribute filament correctly when AMS backup swaps spools mid-print

2026-08-13 08:37:16 +02:00

test_use_ams_reconcile_2595.py

fix(dispatch): honor a resolved AMS mapping over a stale use_ams=false (#2595)

2026-07-18 13:18:59 +02:00

test_user_notifications.py

…

test_user_print_template_rename_migration.py

feat(notifications): template-driven finish-photo email embed + user_print_* rename (#1792)

2026-06-22 11:15:39 +02:00

test_variant_group_backfill_migration.py

Add variant-group data model for cross-model queue alternatives (#671)

2026-08-03 10:17:28 +02:00

test_vp_access_code_sync_migration.py

fix(vp): auto-derive access code from target printer in non-proxy modes

2026-06-05 17:19:16 +02:00

test_vp_certificate_rotation.py

fix(virtual-printer): #1558 Send pre-flight + slicer-surface audit bundle

2026-05-30 13:34:10 +02:00

test_vp_delete_cleanup.py

fix(virtual-printer): #1558 Send pre-flight + slicer-surface audit bundle

2026-05-30 13:34:10 +02:00

test_vp_ftp_port.py

…

test_vp_ftp_stor.py

fix(vp): stop uvloop from silently truncating VP FTP uploads (#1896)

2026-07-05 10:32:13 +02:00

test_vp_mode_rename_migration.py

fix(virtual-printer): #1429 net.info[*].ip cache leak + mode wire-value rename

2026-06-02 14:33:20 +02:00

test_vp_mqtt_bridge.py

Mark four test-side bandit false positives

2026-08-29 15:25:26 +02:00

test_vp_mqtt_server.py

fix(vp): evict MQTT clients on drain timeout + tighten TCP keepalive (#1872)

2026-07-02 10:13:01 +02:00

test_vp_tls_ciphers.py

fix(virtual-printer): #1610 add Bambu cipher pin to every slicer-facing TLS context

2026-06-03 10:04:37 +02:00

test_vp_wire_dump.py

debug(vp): env-flagged command-flow trace for slicer↔printer #1622 round-2 triage

2026-06-11 13:35:20 +02:00

test_ws_broadcast_to_user.py

feat(toast): restore upload-progress toast for scheduler dispatches (#1625 follow-up)

2026-06-27 11:28:00 +02:00