The Re-print and Schedule modal toggles for Flow Calibration and Nozzle
Offset Calibration accepted "off" correctly and flowed it through to the
project_file MQTT publish — Bambuddy sent extrude_cali_flag: 2 and
nozzle_offset_cali: 2 per the "1 = run, 2 = skip" reading inherited from
the #1478 / #1682 work. Live test on H2D 01.x: with both toggles off,
the stg queue still scheduled stage 8 ("Calibrating dynamic flow") and
stage 39 ("Nozzle offset calibration"), and the printer ran both at
print start.
Root cause: 2 means "skip the explicit pass but still apply / verify
stored PA via the calibration stage" — close to a no-op K-factor wise
but the per-print physical sequence still runs. 0 is the encoding that
actually drops the stage from stg. A BambuStudio Send-dialog capture
on the same firmware showed 0 for both fields when the user unchecked
the calibrations — contradicting the #1478 commit's read of "BambuStudio
never sends 0."
Fix:
- extrude_cali_flag = 1 if flow_cali else 0 (was: else 2)
- nozzle_offset_cali = 1 if (nozzle_offset_cali and is_dual_nozzle) else 0
(was: else 2)
Dual-nozzle gate stays; single-nozzle prints continue to force-skip the
nozzle-offset cali their head doesn't support (#1682). The 1 (run)
branch is unchanged.
Verified live on the same H2D after the patch: stg dropped to
[29, 13, 4, 14, 3] (cooling, homing, filament change, nozzle cleaning,
vibration comp). Stages 8 and 39 gone.
Vibration compensation is NOT fixed by this commit: vibration_cali is a
bool in our and BambuStudio's wire format, and the H2D firmware queues
stage 3 regardless of the false value. Firmware-side, not solvable at
the dispatch layer with the current field. Filed as a follow-up.
maziggy
0de71ca412