When enabling Spoolman, stale built-in inventory slot assignments
persisted in the database and the printer card UI still showed
assign/unassign buttons from the internal inventory. Now bulk-deletes
all SpoolAssignment records on mode switch, invalidates the frontend
spool-assignments cache, and hides inventory UI on printer cards while
Spoolman is active.
- Add HA_URL and HA_TOKEN environment variables for automatic HA
integration configuration in HA add-on deployments
- Environment variables always override database settings with
non-negotiable precedence; database values preserved for fallback
- Auto-enable integration when both env vars are set; partial config
(one env var) uses database enable state without auto-enabling
- Add centralized get_homeassistant_settings() function following
Spoolman pattern; replace direct database queries across codebase
- Add ha_url_from_env, ha_token_from_env, ha_env_managed fields to
AppSettings schema to inform frontend about configuration source
- UI shows read-only fields with lock icons and "(Environment Managed)"
labels when env-controlled; toggle shows auto-enable badge
- Add comprehensive test coverage: 9 integration + 8 unit tests
Closes#283
- Replace number inputs with select dropdowns for retry attempts,
retry delay, and connection timeout to avoid auto-save race conditions
- Move connection timeout inside the FTP retry toggle section
- Add ftp_timeout to backend settings schema and integer parsing list
so the value actually persists (was silently dropped before)
Closes#275
Implement accurate per-filament usage tracking for Spoolman integration,
similar to OpenSpoolman v0.3.0. This replaces the previous single-spool
reporting with multi-material aware tracking.
Features:
- Parse G-code from 3MF files at print start to build per-layer,
per-filament cumulative extrusion maps
- Store tracking data in new `active_print_spoolman` database table
(survives server restarts for long prints)
- Report accurate partial usage when prints fail/cancel based on
actual layer progress and G-code data
- Add "Disable AMS Weight Sync" setting to prevent AMS percentage-based
weight estimates from overwriting Spoolman's granular tracking
- Add "Report Partial Usage for Failed Prints" toggle (only shown when
weight sync is disabled)
- Use Spoolman's filament density instead of defaults for mm-to-grams
conversion
- Prefer tray_uuid over tag_uid for spool identification
- SSDP proxy for cross-network setups: select slicer network interface for automatic printer discovery via SSDP relay
- FTP proxy now listens on privileged port 990 (matching Bambu Studio expectations) instead of 9990
- For systemd: requires `AmbientCapabilities=CAP_NET_BIND_SERVICE` capability
- Automatic directory permission checking at startup with clear error messages for Docker/bare metal
Introduces a new "Proxy Mode" for the Virtual Printer that enables
remote printing from anywhere in the world without VPN, port forwarding,
or Bambu Cloud dependency.
Bambuddy acts as a TLS relay between a remote slicer (Bambu Studio/
OrcaSlicer) and the local Bambu Lab printer:
Remote Slicer → Internet → Bambuddy Server → Local Network → Printer
The slicer connects to Bambuddy using the real printer's serial number
and access code. Bambuddy authenticates and relays all FTP (file transfer)
and MQTT (commands/status) traffic with end-to-end TLS encryption.
- No port forwarding required - printer stays safely on local network
- No VPN needed - connect from coffee shops, hotels, work, anywhere
- No Bambu Cloud dependency - fully self-hosted solution
- End-to-end TLS encryption on FTP (port 9990) and MQTT (port 8883)
- Works with Bambu Studio and OrcaSlicer
- Uses real printer credentials for authentication
- Automatic printer selection from connected printers
- Add SlicerProxyManager class for TLS relay (tcp_proxy.py)
- TLS termination with auto-generated certificates
- Concurrent FTP and MQTT proxy servers
- Connection lifecycle management with proper cleanup
- Extend VirtualPrinterManager with proxy mode support
- New 'proxy' mode alongside archive/review/queue modes
- Target printer selection and credential management
- Add proxy configuration endpoints to settings API
- Add permission checks for proxy endpoints
- Add Proxy Mode card to Virtual Printer settings
- Target printer dropdown for proxy destination
- Real-time proxy status display (ports, target, running state)
- Full i18n support (English, German)
- Add network architecture diagram
- Add proxy mode section to README
- Add comprehensive guide to wiki
- Add prominent feature section to website
- Backend unit tests for SlicerProxyManager
- Backend unit tests for proxy mode configuration
- Frontend tests for proxy mode UI components
Closes#207#170
Proxy mode changes:
- Replace transparent TCP proxy with TLS-terminating proxy
- Slicer connects to Bambuddy cert, Bambuddy connects to printer
- Use real printer's serial number for SSDP and certificate
- This ensures MQTT topic subscriptions match the real printer
The proxy now:
1. Accepts TLS from slicer using Bambuddy's certificate
2. Opens TLS connection to real printer
3. Forwards decrypted data bidirectionally
Also: Complete i18n localization for VirtualPrinterSettings component
Replace the complex JSON-based backup system (~2000 lines) with a simple
approach that copies the SQLite database and all data directories into a
single ZIP file.
Backend changes:
- Add close_all_connections() and reinitialize_database() helpers to database.py
- New GET /backup endpoint: creates complete ZIP with bambuddy.db and all
data directories (archive, virtual_printer, plate_calibration, icons, projects)
- New POST /restore endpoint: extracts ZIP, replaces database and directories,
requires restart after restore
- Move legacy endpoints to /backup-legacy and /restore-legacy for transition
Frontend changes:
- Simplify api.exportBackup() - no longer takes category parameters
- Simplify api.importBackup() - no longer takes overwrite parameter
- Remove BackupModal and RestoreModal components from GitHubBackupSettings
- Add simple Download/Restore buttons with inline logic
- Add blocking modal overlay during backup/restore operations
- Add beforeunload handler to prevent accidental navigation
- Show operation status messages during backup/restore
Benefits:
- ~100 lines vs ~2000 lines of backup/restore code
- Complete by definition - SQLite database contains ALL data
- No code changes needed when schema changes
- No ID remapping required - IDs stay the same
- Faster - file copy vs querying all tables
Resolved conflicts:
- CHANGELOG.md: Kept both HA Script Support and STL Thumbnail features
- database.py: Kept both migration sets (UNIQUE constraint removal + queue columns)
- SmartPlugCard.tsx: Merged script UI support with base styling
- static/: Rebuilt frontend with merged changes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implement a full permissions system replacing simple admin/user roles:
Backend:
- Add Group model with many-to-many user relationship
- Add 50+ granular permissions (resource:action pattern)
- Create default groups: Administrators, Operators, Viewers
- Add permission-checking dependencies for route protection
- Add groups API endpoints (CRUD, user assignment)
- Add change password endpoint for users
- Update backup/restore to include groups
- Migrate existing users to groups on startup
Frontend:
- Add GroupsPage for managing groups and permissions
- Add permission helpers to AuthContext (hasPermission, hasAnyPermission)
- Add PermissionRoute component for protected routes
- Disable buttons/features based on permissions (with tooltips)
- Add change password modal in sidebar for all users
- Add forgot password info modal on login page
- Show user groups in UsersPage with group assignment
Testing:
- Add integration tests for groups API
- Add tests for user-group assignments
- Add tests for change password endpoint
- Seed default groups in test fixtures
Closes#28#161
- Add separate MQTT topics for power, energy, and state monitoring
- mqtt_power_topic, mqtt_power_path, mqtt_power_multiplier
- mqtt_energy_topic, mqtt_energy_path, mqtt_energy_multiplier
- mqtt_state_topic, mqtt_state_path, mqtt_state_on_value
- Support different MQTT topics per data type (e.g., Zigbee2MQTT with
separate power/energy/state topics)
- Individual multipliers for power and energy (e.g., mW→W, Wh→kWh)
- Configurable ON value for state monitoring (e.g., "ON", "true", "1")
- Maintain backward compatibility with legacy mqtt_topic/mqtt_multiplier
- Database migration auto-copies legacy fields to new fields
- Update backup/restore to handle new MQTT fields
- Add backend tests for new MQTT configurations
- Update frontend form with organized Power/Energy/State sections
Closes#173
Enhance Home Assistant script support with automation triggers and
printer card visibility control.
- Script automation: Run scripts automatically when main plug turns on/off
- Show/hide scripts on printer cards (configurable per script)
- Scripts appear in dedicated row on printer cards with quick-run buttons
- Toast notification when triggering scripts from settings/sidebar
Closes#176
Add support for MQTT-based smart plugs that subscribe to external MQTT
topics and extract power/energy data from JSON payloads. This enables
integration with Zigbee2MQTT, Shelly, Tasmota discovery, and other
MQTT-enabled energy monitoring devices.
Features:
- New "mqtt" plug type alongside tasmota and homeassistant
- Subscribe to any MQTT topic with configurable JSON paths
- Extract power, energy, and state values using dot notation
- Optional multiplier for unit conversion (mW to W, etc.)
- Monitor-only mode (no on/off control) with teal color scheme
- Reuses existing MQTT broker settings from network configuration
- Energy data included in statistics and per-print tracking
- Full backup/restore support for MQTT plug configurations
Closes#173
Add new setting "Check printer firmware" in Settings → General → Updates
that allows users to disable automatic firmware update checks from
Bambu Lab servers.
Closes#169
Model-based queue assignment:
- Extract printer_model from sliced 3MF files during upload
- Display sliced-for model in archive view
- New queue mode: assign to "Any [Model]" instead of specific printer
- Scheduler auto-assigns to first idle printer of matching model
- Filament validation: only assign to printers with required filament types loaded
- Waiting reason display shows why jobs are waiting (e.g., "Waiting for filament: Printer1 (needs PLA)")
- "Waiting" status badge (purple) distinguishes from regular "Pending"
Queue notifications (7 new events):
- Job Added: When a job is added to queue
- Job Assigned: When a model-based job is assigned to a printer
- Job Started: When a queue job starts printing
- Job Waiting: When a job is waiting for filament (enabled by default)
- Job Skipped: When a job is skipped due to previous failure (enabled by default)
- Job Failed: When a job fails to start (enabled by default)
- Queue Complete: When all queued jobs finish
Backend changes:
- New columns: print_queue.target_model, print_queue.required_filament_types, print_queue.waiting_reason
- New columns: notification_providers.on_queue_job_* (7 event triggers)
- Notification templates for all queue events
- Scheduler validates filament compatibility before model-based assignment
- Queue API extracts filament types from 3MF when adding model-based items
- Local backup/restore includes queue notification settings
Frontend changes:
- TypeScript interfaces updated for new fields
- Queue page shows waiting reason and "Waiting" badge
- Notification settings includes "Print Queue" section with 7 toggles
Closes#162
Expose printer telemetry at /api/v1/metrics in Prometheus text format for
integration with Grafana, Prometheus, and other monitoring systems.
Backend:
- Add metrics.py route with GET /api/v1/metrics endpoint
- Support optional bearer token authentication
- Export printer metrics: connection, state, temperatures, fans, WiFi
- Export print metrics: progress, remaining time, layer count
- Export statistics: prints by status, filament used, print time
- Export queue metrics: pending and active jobs
- Add prometheus_enabled and prometheus_token settings
Frontend:
- Add Prometheus Metrics card in Settings → Network tab
- Toggle to enable/disable metrics endpoint
- Optional bearer token field for authentication
- Display list of available metrics
Tests:
- Add test_metrics_api.py with 7 integration tests
- Test access control (disabled, enabled, token auth)
- Test metrics format and content validation
New feature to automatically backup K-profiles, cloud profiles, and app
settings to a GitHub repository with scheduled or on-demand execution.
Features:
- Configure GitHub repo URL and Personal Access Token
- Schedule backups hourly, daily, or weekly (background scheduler)
- Manual backup trigger with real-time progress tracking
- Skip unchanged commits (only creates commit when data changes)
- Backup history log with status and commit links
- Requires Bambu Cloud login for full profile access
- New Settings → Backup & Restore tab consolidating all backup options
- GitHub backup config included in local backup/restore (except PAT)
Backend:
- New models: GitHubBackupConfig, GitHubBackupLog
- New service: GitHubBackupService with scheduler and GitHub API client
- New routes: /github-backup/* for config, status, logs, and triggers
- Updated settings.py to include github_backup in backup/restore
Frontend:
- New GitHubBackupSettings.tsx component with auto-save
- Updated SettingsPage with Backup tab and status indicator
- Added API types and methods to client.ts
Tests:
- Backend integration tests for all GitHub backup API endpoints
- Frontend API type and endpoint tests
- Add "Plate Detection" option to backup modal
- Store printer_id_to_serial mapping in backup for calibration files
- Remap printer IDs during restore based on serial numbers so files
like printer_3_ref_0.jpg get correctly renamed if printer 3 becomes
printer 2 on the new system
- Add parents=True to mkdir calls in config.py to fix startup crash
- Labels/metadata are now correctly restored via the metadata.json files
- Add USB camera type to external camera service
- Auto-detect available V4L2 devices on Linux
- New API endpoint: GET /api/v1/printers/usb-cameras
- Use ffmpeg for USB camera capture and streaming
- Add "USB Camera (V4L2)" option in Settings UI
- Debounce camera URL input to avoid saving on every keystroke
Closes#143
Automatically detect if objects are on the build plate before printing
and pause the print immediately if detected.
Features:
- Per-printer toggle to enable/disable plate detection
- Multi-reference calibration: store up to 5 reference images per printer
for different plate types (textured, smooth, high-temp, etc.)
- Automatic print pause when objects detected at print start
- Push notification and WebSocket alert when print is paused
- ROI (Region of Interest) calibration UI with sliders to adjust
detection area
- Reference management: view thumbnails, add labels, delete references
- Works with both built-in and external cameras
- Uses buffered camera frames when stream is active (no blocking)
- Split button UI: main button opens modal, chevron toggles on/off
- Green visual indicator when plate detection is enabled
- Included in backup/restore
Allow users to manually set external URLs for archives from Printables,
Thingiverse, or other sources. The Globe button now opens the external
link when set, falling back to auto-detected MakerWorld URL.
- Add external_url field to PrintArchive model with migration
- Add input field to archive edit modal
- Update Globe button: external_url > makerworld_url > disabled
- Include external_url in backup/restore
- Add API test for external_url update
- Update docs (changelog, wiki, website)
Closes#151
Add support for external network cameras (MJPEG, RTSP, HTTP snapshot)
that replace a printer's built-in camera when configured.
Features:
- Live streaming on printers page (replaces built-in camera)
- Finish photo capture from external camera on print complete
- Layer-based timelapse: captures frame on each layer change,
stitches to MP4 video on print completion
Backend changes:
- Add external_camera_url, external_camera_type, external_camera_enabled
fields to Printer model with database migration
- New external_camera.py service: MJPEG/RTSP/snapshot frame capture,
connection testing, MJPEG stream generation
- New layer_timelapse.py service: TimelapseSession management,
layer-by-layer frame capture, ffmpeg video stitching
- Add on_layer_change callback to MQTT client and printer manager
- Update camera routes with external camera streaming and tracking
- Update print lifecycle hooks for timelapse start/stitch/cancel
- Add external camera fields to backup/restore
- Rate limiting for external camera streams (prevents browser freeze)
Frontend changes:
- Add external camera configuration UI in Settings > Camera
- Per-printer enable toggle, URL input, type selector, test button
- Toast notification on save
Closes#143
Home Assistant smart plugs can now use separate sensor entities for
energy monitoring, enabling energy tracking for plugs that expose
power/energy data as separate sensors (Tapo, IKEA Zigbee2mqtt, etc.).
Features:
- Configure dedicated power (W), today (kWh), and total (kWh) sensors
- New API endpoint GET /api/v1/smart-plugs/ha/sensors lists available sensors
- Falls back to switch entity attributes if no sensors configured
- Print energy tracking now works for HA plugs (not just Tasmota)
Backend:
- Added ha_power_entity, ha_energy_today_entity, ha_energy_total_entity
fields to SmartPlug model
- Updated get_energy() to fetch from configured sensor entities
- Added _get_plug_energy() helper to handle both plug types
- Updated backup/restore to include new fields
- Added database migration for new columns
Frontend:
- Added energy sensor dropdowns in AddSmartPlugModal (shown for HA plugs)
- Dropdowns filtered by unit (W/kW for power, kWh/Wh for energy)
Tests:
- Added 4 new integration tests for HA energy sensor functionality
Docs:
- Updated README with new feature
- Updated CHANGELOG with 0.1.6b11 entry
Fixes:
- Fixed is_auth_enabled() returning None instead of False when setting doesn't exist (in both auth.py and routes/auth.py)
- Fixed get_current_user() crashing when credentials is None
- Added missing async_session patch in conftest.py for auth tests
Backup/Restore - Added Users Support
- Added include_users parameter to backup export
- Users are exported with username, role, and is_active (passwords excluded for security)
- Restore creates users with temporary passwords that must be changed
Backend Tests - 16 New Auth Tests
- test_auth_api.py with tests for:
- Auth status endpoint
- Auth setup (enable/disable)
- Login flow (success, invalid credentials, auth disabled)
- /me endpoint with/without token
- User management (list, create, update, delete)
- Auth disable
Frontend Tests - 6 New Login Tests
- LoginPage.test.tsx with tests for:
- Form rendering
- Input validation
- Login submission
- Loading states
Documentation Updates
- CHANGELOG.md/README.md: Added authentication feature description
- Website (features.html): Added new "Optional Authentication" section
- Wiki: Created authentication.md with full documentation
- Wiki index: Added authentication to features list
- New useMultiPrinterFilamentMapping hook for parallel printer status fetching
- Per-printer custom slot configuration with "Custom mapping" checkbox
- Auto-configure using RFID data to match filaments by type/color
- Match status indicator (exact/partial/missing) under each printer
- Re-read button to refresh loaded filaments
- New setting: "Expand custom mapping by default" in Settings → Filament
- FilamentMapping component now accepts defaultExpanded prop
Frontend:
- PrinterSelector: Inline mapping editor for each selected printer
- PrintModal: Fetches settings, auto-expands mapping when setting enabled
- SettingsPage: Toggle for per_printer_mapping_expanded
Backend:
- Added per_printer_mapping_expanded to AppSettings schema
- Added boolean parsing in settings routes
- Added integration tests for new setting
Closes#104
maziggy