Three interrelated bugs in AMS info field parsing caused AMS units
to appear on the wrong nozzle on H2D dual-nozzle printers:
1. Info field parsed as decimal instead of hex (BambuStudio uses
std::stoull with base 16)
2. Extruder ID extracted as 1-bit instead of 4-bit field (bits 8-11)
3. Partial MQTT updates replaced the full extruder map instead of
merging into it
home_flag bit 18 was incorrectly interpreted as "wired/ethernet
connection", causing the ethernet badge to always show — even on
printers without an ethernet port (e.g. A1, P1S). This hid the
WiFi signal indicator entirely.
Removed the wired_network field and ethernet badge UI. The WiFi
signal badge now shows correctly whenever the printer reports
signal strength.
* Added "Force Color Match" feature to filament override
* Update settings.py
* Update settings.py
* Label updates for warnings and checkbox case
* Initial plan
* Add noMatchingMaterial i18n translations to all 7 locale files
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Use {{material}} interpolation in noMatchingMaterial; populate from filament_overrides with getColorName
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Updates for PR#625 comments
* Added "Force Color Match" feature to filament override
* Update settings.py
* Update settings.py
* Label updates for warnings and checkbox case
* Initial plan
* Add noMatchingMaterial i18n translations to all 7 locale files
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Use {{material}} interpolation in noMatchingMaterial; populate from filament_overrides with getColorName
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Updates to PrintersPage and QueuePage
* Update QueuePage.tsx
* Rebase to 0.2.2b3
* Fix compile errors with FilamentOverride
* Updates for PR#625 comments
https://github.com/maziggy/bambuddy/pull/625#pullrequestreview-3908738261
* Fix force color match default, loadedFilamentTypes bug, remove dead translations
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
Co-authored-by: MartinNYHC <mz@v8w.de>
Virtual printers in Queue mode now have an "Auto-dispatch" setting.
When enabled (default), prints start automatically — preserving current
behavior. When disabled, prints are added with manual_start so they
wait for manual dispatch from the queue UI.
The FTP upload skipped reading the server's "Transfer complete"
confirmation, sending the print command before the file was flushed
to the SD card. Now waits for the 226 response with a 60s timeout.
Add {eta} template variable showing wall-clock completion time
(e.g. "15:53" or "3:53 PM") to print_start, print_progress, and
queue_job_started notifications. Respects the user's time_format
setting (12h/24h). The existing {estimated_time} variable continues
to show duration ("1h 23m").
Two lazy-load bugs caused greenlet_spawn errors in the RFID auto-assign
flow:
1. create_spool_from_tray set spool.k_profiles=[] AFTER db.flush(),
but assigning to a relationship on a persistent object triggers a
lazy load (SQLAlchemy loads the current collection before replacing).
Moved initialization to BEFORE db.add().
2. spool.assignments was never initialized or eagerly loaded, so
db.add(SpoolAssignment) triggered a back_populates lazy load
outside the async greenlet. Added assignments=[] in create and
selectinload(Spool.assignments) in get_spool_by_tag.
Also added exc_info=True to error handlers for full tracebacks, and
19 new tests including greenlet regression tests that reproduce the
exact failure.
enum.StrEnum was added in Python 3.11, but the documented minimum is
3.10. Add a compatibility shim in backend/app/core/compat.py that falls
back to (str, Enum) on older versions. Updated all 5 import sites and
lowered pyproject.toml target-version to py310.
Bambu printers only support plain RSA key exchange ciphers
(AES256-GCM-SHA384, AES128-GCM-SHA256), but Python's OpenSSL 3.x
defaults exclude them in favor of forward-secrecy (ECDHE/DHE) only.
Add the RSA ciphers to the client SSL context so the TLS proxy can
connect to the printer's bind port (3002).
When the print queue scheduler finds pending items but doesn't start
any, there was no logging to explain why. Added INFO-level summary
after each queue check showing skip reasons (manual_start,
scheduled_future) and busy printer details (state, connected,
plate_cleared). Also added DEBUG-level logging in _is_printer_idle()
for the specific condition that failed.
* AMS Labels addition to PrintersPage
* Added database reinitialization for schema migrations on database restore
* Bug fixes and AMS Label persistence updates
* Update database.py to resolve PR conflicts
* PR Comment Resolution
* Resolve conflicts in database.py for PR#570
* Updates to address PR#570 additional comments
* Optimize visibility handling for popup component
* Improve serial key handling in printers.py
Refactor serial key assignment to handle empty AMS serial gracefully.
* Implement error handling in serial number mapping
Add error handling for serial number mapping.
* Add migration to drop old ams_labels table
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
Floating bug report button submits issues via bambuddy.cool relay (no GitHub
token needed locally). Collects 30s debug logs with printer push_all, sanitizes
all sensitive data, uploads logs as files to GitHub. Screenshot upload/paste/drag
with JPEG compression. Translated into all 7 languages. Includes 21 tests.
Parse home_flag bit 18 (0x00040000) from MQTT to detect ethernet
connections. When set, the printer card shows a green "Ethernet"
badge with a cable icon instead of WiFi signal strength in dBm.
The printer info modal also displays "Ethernet" instead of WiFi
signal details.
The firmware check only mapped display names (e.g., "H2D Pro") to
API keys but not raw SSDP device codes (e.g., "O1E", "O2D"). If a
printer's model was stored as the raw SSDP code, the firmware check
either failed or matched the wrong model — H2D Pro matched against
H2D firmware, showing a false update-available badge.
Add all known SSDP device codes to MODEL_TO_API_KEY so firmware
versions resolve correctly regardless of how the model was stored.
The previous fix only filtered status codes (< 0x4000) from the
print_error field. Firmware can also send the same false positive
through the hms array in MQTT, which had no such filter. Apply the
same < 0x4000 check to the HMS parser so status/phase indicators
are skipped regardless of which MQTT field carries them.
The isSlicedFile() check only matched .gcode or .gcode.3mf extensions,
so archives from .3mf prints (the standard Bambu slicer output) showed
a "SOURCE" badge instead of "GCODE". Since .3mf can be either sliced or
a raw CAD export, now checks the archive's total_layers and
print_time_seconds metadata to distinguish them. Also passes the
original filename when creating archives from file manager prints.
FTP upload: reduce chunk size from 1MB to 64KB for smooth progress bar
updates (~1s intervals instead of 20+ second gaps). Skip voidresp() for
all printer models — H2D delays the 226 response by 30+ seconds after
data transfer, causing a hang at 100%. Add transfer speed and TLS
handshake timing to logs for diagnosing slow connections.
Print/Schedule modal: widen from max-w-lg (512px) to max-w-2xl (672px)
to accommodate long filament profile names like "PLA Support for PETG
PETG Basic @Bambu Lab H2D 0.4 nozzle".
Profiles like "PLA Support for PETG PETG Basic @Bambu Lab H2D" have
filament_type PETG, but both the frontend and backend name parsers
found "PLA" first (iterating material types in order). The MQTT command
sent tray_type=PLA and tray_info_idx=GFL99 (PLA generic), so the
slicer displayed PLA instead of PETG.
- Frontend parsePresetName(): detect "X Support for Y" pattern, extract
material after "Support for"
- Frontend ConfigureAmsSlotModal: prefer corrected parsed material over
stored localPreset.filament_type for tray_type, tray_info_idx, and
temperature fallback
- Backend _parse_material_from_name(): same "Support for" handling for
future profile imports
- Backend assign_spool: prioritize spool.material over lp.filament_type
for generic filament ID lookup
Some firmware sends non-zero print_error values (e.g. 0x03000002 →
0300_0002) during normal printing as status/phase indicators. The
parser treated any non-zero value as a real error, triggering
notifications. All known real errors have codes >= 0x4000 (fatal,
warning, prompt ranges). Now skips print_error values where the
low 16 bits are below 0x4000.
Also fix K-profile greenlet error on auto-created RFID spools by
eagerly setting k_profiles=[] after flush in create_spool_from_tray().
create_spool_from_tray() didn't eagerly load the k_profiles
relationship, so auto_assign_spool() triggered a lazy load in async
context when iterating spool.k_profiles. Set k_profiles=[] on new
spools since they can never have K-profiles yet.
Write NTAG213/215/216 tags for third-party spools via the SpoolBuddy
kiosk UI. New "Write" page with three workflows: existing spool, new
spool creation, and tag replacement. Backend encodes 133-byte OpenTag3D
NDEF payloads (material, color, brand, weight, temp). Daemon writes
page-by-page via PN5180 NTAG WRITE command with read-back verification.
Write commands flow through heartbeat polling with WebSocket status
updates. Includes 39 new tests and translations for all 6 languages.
- Add lightweight GET /archives/slim endpoint with column-level SELECT
(13 fields vs 46), skipping duplicate detection for ~70-80% payload
reduction on the stats dashboard
- Add ArchiveSlim Pydantic schema and TypeScript type
- Switch StatsPage and FilamentTrends to use ArchiveSlim
- Fix critical bug in failure_analysis.py: use effective_days for week
count, separate non-date filters, build fresh week_filter per loop
- Fix busiestDay timezone bug: parse YYYY-MM-DD with split() + local
Date constructor instead of new Date() which creates UTC midnight
- Fix success streak ordering: sort by completed_at || created_at
instead of created_at alone
- Add 6 integration tests for /archives/slim endpoint
Add Print Time of Day, Color Distribution, and Records widgets to the
Stats page. Extract shared MetricToggle component for consistent
weight/prints/time toggles. Add date range filtering to archives and
stats API endpoints. Reorganize widgets into parent cards (Printer Stats
and Filament Trends) and fix Dashboard layout persistence for new widgets.
BambuStudio uses TLS on port 3002 for certain printer models (e.g. A1
Mini / N1). The bind server only spoke plain TCP on both ports, so the
TLS ClientHello was rejected as "invalid frame" and the slicer could
never discover or connect to the virtual printer.
Port 3002 now uses TLS (reusing the VP's existing certificate), port
3000 remains plain TCP. Also updated proxy-mode to use TLSProxy for
the port 3002 bind proxy instead of raw TCPProxy.
sync_from_db() skipped VPs already in self._instances without checking
if their config had changed. Mode, model, access code, bind IP, remote
interface IP, and target printer changes were silently ignored until
manual toggle off/on or full restart. Now detects config drift and
restarts affected instances.
Four support package improvements:
1. Mask first two octets of subnet IPs in support info
(192.168.1.0/24 → x.x.1.0/24) to avoid leaking private network
addresses.
2. Fix Docker network_mode_hint detection. The old heuristic
(interface count > 2) always reported "bridge" on single-NIC
hosts because get_network_interfaces() excludes Docker
interfaces. Now checks for docker0/br-*/veth* visibility via
socket.if_nameindex() — these are only visible in host mode.
3. Parse MQTT "fun" field at top level of payload (not just inside
"print" key). Some firmware versions send it there, which
explains why developer_mode was null for most users.
4. Add virtual_printers section to support info with mode, model,
enabled/running status, and pending file count.
The H2C dual nozzle variant reports model code O1C2 via MQTT, but only
O1C was recognized. This caused the camera to use the wrong protocol
(chamber image on port 6000 instead of RTSP on port 322), producing a
reconnect loop. Added O1C2 to all model ID maps across 8 files.
Some firmware versions send MQTT payloads with non-UTF-8 bytes.
UnicodeDecodeError was uncaught, silently dropping the entire message
and leaving printer status as "unknown" with 0°C temps and no AMS.
Fall back to decode(errors="replace") to keep JSON parseable.
The print scheduler had two code paths for queue items: model-based
(target_model set) and printer-specific (printer_id set). Only the
model-based path computed ams_mapping before starting the print. VP
queue items assigned to a specific printer went through the
printer-specific path with null ams_mapping, causing the printer to
default to the first AMS slot regardless of what the 3MF required.
Add _compute_ams_mapping_for_printer() call to the printer-specific
path, matching the existing model-based behavior.
When a virtual printer auto-queued a file, PrintQueueItem was created
without plate_id. The scheduler defaulted to plate_id=1, generating
MQTT path "Metadata/plate_1.gcode". For multi-plate 3MF files sliced
on a different plate, the printer couldn't find the gcode and returned
HMS error 0500_4003. Extract plate index from the 3MF's slice_info.config
before creating the queue item.
Virtual printer "print_queue" mode created queue items with no printer
assignment. Now sets target_model from the VP's SSDP model code (e.g.
P1S, X1C) for "Any Printer" scheduling, or uses target_printer_id if
configured.
Settings page auto-save onSuccess overwrote localSettings with the
server response, discarding characters typed during the save request.
Removed the stale state overwrite so in-progress input is preserved.
When scheduling a print to "any printer" with a filament color override,
the scheduler picked a printer with the correct filament type but wrong
color. _find_idle_printer_for_model() used color matching only for
ranking candidates, not filtering — a printer with 0 color matches was
still selected if it had the right types.
Now requires at least 1 color match when filament overrides specify
colors. Printers with 0 matches are skipped and reported in the
"waiting for filament" reason instead of being treated as candidates.
Three independent code paths wrote to archive.cost with conflicting
strategies, causing the same model to produce different prices on each
reprint (e.g. £0.77, £1.54, £2.03).
- Remove add_reprint_cost (Path 3) — redundant cost accumulation that
double-counted on top of usage tracker
- Fix usage tracker (Path 2) — compute cost from current session's
results only, not a SUM of all historical SpoolUsageHistory rows
- Remove _reprint_archives tracking set from main.py
- Update test mocks to match simplified query pattern
archive.cost now always reflects the cost of a single print.
All backend timestamps used datetime.now() (server local time) or the
deprecated datetime.utcnow(). The frontend's parseUTCDate() assumes
timestamps without timezone indicators are UTC and appends 'Z', so
stored timestamps were off by the timezone offset when the container's
timezone wasn't UTC.
Backend: replaced datetime.now() and datetime.utcnow() with
datetime.now(timezone.utc) across 16 files (~80 call sites) for all
database fields and DB comparisons. Cosmetic timestamps (filenames,
user-facing local time formatting) intentionally left as local time.
Frontend: replaced 13 new Date(backendTimestamp) calls with
parseUTCDate() across 8 files to correctly interpret UTC timestamps.
H2D firmware reports stg_cur=74 during print preparation, which was
not in the STAGE_NAMES lookup table (sourced from BambuStudio, which
only goes up to 66). This caused "Unknown stage (74)" to display on
the printer card. Also adds stage 77 ("Preparing AMS") which exists
in BambuStudio source but was missing from the lookup.
When scheduling a print to "any printer" (model-based assignment),
users can now override the 3MF's original filament choices per slot.
The override dropdown shows compatible filaments loaded across all
printers of the selected model, filtered by type and nozzle (H2D).
The scheduler matches against overridden type/color instead of the
original 3MF values, preferring printers with exact color matches.
Backend:
- New GET /printers/available-filaments endpoint (aggregates loaded
filaments across printers of a model, includes extruder_id for
dual-nozzle nozzle-aware filtering)
- New filament_overrides JSON column on print_queue table
- Scheduler applies overrides before AMS mapping, clears tray_info_idx
on overridden slots so color matching takes priority
- Printer selection prefers printers with most override color matches
Frontend:
- New FilamentOverride component with per-slot override dropdowns
- Type-filtered options (PLA slots only show PLA)
- Nozzle-aware filtering (H2D: only shows filaments on correct extruder)
- Integrated into PrintModal for model-based queue mode
Tests:
- 11 backend unit tests (color match counting, override application)
- 12 frontend tests (rendering, type/nozzle filtering, interactions)
i18n: All 6 locales (en, de, fr, it, ja, pt-BR)
The MQTT "fun" field is an integer in the JSON payload, but the
parser used int(value, 16) which requires a string. This raised
TypeError on every message, silently swallowed by the except clause,
so developer_mode was never set.
Parse the MQTT "fun" field bit 0x20000000 to detect whether connected
printers have Developer LAN Mode enabled. Show a persistent orange
warning banner when any printer lacks it, since newer firmware silently
rejects MQTT write commands without developer mode.
- Parse fun field into developer_mode on PrinterState
- Add /printers/developer-mode-warnings lightweight polling endpoint
- Include developer_mode in printer status API and support bundle
- Orange banner with affected printer names and wiki link
- Translations for all 6 locales (en, de, fr, it, ja, pt-BR)
- 7 backend + 4 frontend tests
P2S firmware sends local slot IDs (0-3) in tray_now, not global tray
IDs, when multiple AMS units are connected. The UI highlighted the
wrong AMS unit (e.g., AMS-A instead of AMS-B). Usage tracking was
unaffected because it uses the MQTT mapping field.
Added disambiguation in _handle_ams_data for single-nozzle printers
with ams_exist_bits indicating >1 AMS: cross-references tray_now with
the MQTT mapping field (snow-encoded) to resolve the correct global
tray ID. Falls back to raw value when no mapping is available or
ambiguous. No behavior change for single-AMS printers or dual-nozzle
(H2D) printers.
Three bugs allowed uploaded gcode files to survive on the printer's SD
card, causing firmware restarts to auto-start old prints hours later.
1. The post-print cleanup retry loop always broke after attempt 1
regardless of delete success — delete_file_async returns False on
failure instead of raising, so the except-based retry never fired.
2. When start_print() failed after uploading, the file was never cleaned
up since on_print_complete never fires for prints that never started.
3. Cleanup failures were logged at DEBUG level, invisible in production.
When a spool runs empty mid-print and the AMS auto-switches to a backup,
the entire print weight was attributed to the original spool. Track tray
changes during the print via tray_change_log on PrinterState, then split
the 3MF weight across trays using per-layer gcode segment boundaries at
print completion. Falls back to linear layer-ratio splitting when gcode
data is unavailable.
ntfy servers with attachments disabled reject thumbnail uploads with
"attachments not allowed" (HTTP 400 / code 40014), causing the entire
notification to fail. Now automatically retries without the image so
the notification still gets delivered.
The log sanitizer only used regex patterns, missing arbitrary user-chosen
strings (printer names, usernames). Tasmota smart plug credentials were
logged verbatim in URLs by httpx.
- Make _sanitize_log_content() database-aware: query Printer names/serials,
User usernames, and Bambu Cloud email for exact-string replacement
(longest-first, skip <3 chars to prevent over-redaction)
- Fix serial regex leaking first 3 chars (remove capture group partial
redaction), add case-insensitive flag
- Move Tasmota credentials from URL-embedded (http://user:pass@host) to
httpx auth= parameter so they never appear in logs
- Add URL credentials regex as defense-in-depth for user:pass@ in logs
- Add 'username' and 'path' to settings sensitive_keys filter (catches
smtp_username, slicer_binary_path in support-info.json)
When sending notifications with image attachments (progress/error
events), the message body was placed in an HTTP Message header. Messages
containing newlines (e.g. "Printer: file.stl\nRemaining: 4h 52m") were
rejected by httpx since HTTP headers cannot contain newline characters.
Escape newlines to literal \n which ntfy renders as line breaks.
MQTT raw data returns AMS unit and tray IDs as strings (e.g. "0"),
but _build_loaded_filaments() compared them to integers without
casting. After the scheduler assigned an idle printer to an "Any
Model" job, it crashed computing AMS mapping with:
'>=' not supported between instances of 'str' and 'int'
The exception prevented the assignment from committing, so the
scheduler retried every 30 seconds in an infinite loop. The job
stayed in "Waiting" and the "Clear Plate" button kept reappearing.
Cast ams_id and tray_id to int(), matching the pattern already used
for external spool IDs on line 550.
maziggy