The Queue listing serialized each item by opening its 3MF and re-parsing
slice_info.config three times (print time, filament usage, bed type) on
every poll, per connected client, even for unchanged files. Add a single
combined extract_plate_metadata_from_3mf() cached by (path, plate_id,
mtime_ns, size); the three legacy helpers delegate to it. An unchanged
queue now does no repeat 3MF parsing.
The progress-milestone and HMS-error notification paths in
on_printer_status_change held a session across the ~15s camera snapshot
taken for the notification image, pinning a pooled connection per
milestone/error per printer.
The snapshot needs no DB: read the printer in a short session, release
it, grab the snapshot with none held, then open a fresh session for the
notification send (and lift the db-free MQTT publish out too). Pinned by
a test that fails if the snapshot runs while a session is open.
Large PostgreSQL farms exhausted the fixed pool (pool_size=10 +
max_overflow=20): with ~93 printers every connection sat idle in
transaction and unrelated requests waited out the 30s pool timeout or
failed in the auth middleware.
- Make pool sizing env-configurable (DB_POOL_SIZE / DB_MAX_OVERFLOW /
DB_POOL_TIMEOUT / DB_POOL_RECYCLE); raise the Postgres default to
20 + 80 with pool_pre_ping + pool_recycle=1800.
- Cache the auth_enabled probe (30s) to drop a per-request DB round-trip.
Only enabled=True is cached, so staleness fails closed; set_auth_enabled
invalidates immediately.
- Add GET /api/v1/system/db-pool exposing resolved config + live
checked_out/checked_in/overflow gauges without consuming a connection.
Session-hygiene (connections held across MQTT/FTP/camera/3MF I/O) is a
separate follow-up.
A slot mapped to a different filament than it was sliced for (PLA slice
routed to the only loaded PETG slot) was logged under the sliced material
in the archive, Print Log and material stats, even though the correct spool
was debited. Once usage tracking resolves every used slot to a spool, adopt
the spool's material as the archive filament_type, exactly as the spool
colour is already adopted (#1494). All-or-nothing; both inventory backends;
flows through to the Print Log and stats. No schema/UI/i18n change.
The scheduler slept a fixed 30s after every pass, so each printer that
freed up during a batch waited up to a full interval before its next job
was dispatched — on a farm, that idle gap stacked into the "several long
minutes" reporters saw between requesting prints and them starting (#2555).
check_queue() now reports whether it dispatched anything; run() loops again
after 3s on a productive pass and falls back to 30s otherwise. Fast ticks
only continue while the queue is actively draining, so this can't tight-loop:
a pass that dispatches nothing (all pending items behind busy printers, or a
wedged head-of-line job holding its printer) reverts to the normal interval.
The single-connection barrier from the last round was correct and was being
bypassed. shutdown_broadcaster() popped the broadcaster out of the registry
and only then awaited its teardown, so while the socket was still closing the
slot sat empty: a /camera/stream request landing in that window minted a
broadcaster with no predecessor and dialled port 6000 immediately. A page
reload fires /camera/stop and the new stream request concurrently, so a P1S
ended up holding two connections, kept feeding the orphan, and starved the
live viewer until its TCP keepalive reaped the dead one ~20 min later. The
stopped broadcaster now stays in the registry so the successor chains behind
its socket close.
The camera page also rendered the <img> src before the stream token arrived
whenever auth was disabled, then swapped it once the token landed — aborting
the in-flight request and issuing a second one. With auth off both reached the
backend, so every load attached two viewers to a one-socket printer. The src
now waits for the token query to settle.
Subscribers only checked for client disconnect after yielding a frame or on a
30s idle timeout, so a viewer that left during a black stream stayed counted —
and /camera/stop trusts that count to decide whether to tear the upstream down.
An expired token was indistinguishable from a working one. set_token()
stamped token_expiry = now + 30 days every time a stored token was loaded,
so the expiry reset on every request and is_authenticated could never
return False. /cloud/status answered "connected" for as long as any token
existed, while every cloud call 401'd — and the user was shown Bambu's own
{"error": "Please login."} verbatim.
Bambu is now the authority: /cloud/status validates the token upstream
(cached 5m), and any 401 from any authenticated call durably records the
credential as dead via users.cloud_token_invalid_at, so MakerWorld, cloud
profiles, slicer presets and firmware checks all agree at once. An
unreachable Bambu is treated as unknown, never as expired, so an outage
cannot sign a working session out.
The user-facing message now names the Profiles page, where the Bambu Cloud
sign-in actually lives; the old text pointed at a Settings page that does
not exist. Same stale path corrected in the wiki.
The reporter's 19-printer farm started prints "one by one", up to an hour apart.
check_queue awaited each dispatch inline, and a dispatch includes the FTP upload,
so every printer queued behind every other printer's transfer despite being an
independent machine. His logs give the arithmetic: 40978500 bytes in 254.1s,
157 KB/s - a Bambu printer's SD write, not the network, is the bottleneck. Nineteen
of those in series is ~80 minutes, and the next upload started 131 ms after the
previous one finished. The delay is linear in fleet size, which is why it got worse
the more printers he selected.
Dispatch is now collected during the (still sequential) selection loop and run
concurrently afterwards, capped by queue_max_concurrent_uploads - Settings ->
Workflow -> Queue & Dispatch, default 4, 1 restores the old behaviour. Every gate
is untouched; only the transfers overlap. The pass still awaits its uploads before
returning: _start_print flips the row pending -> printing only after the upload,
so an early return would let the next tick re-dispatch the same rows.
FTP work moves to its own thread pool. It was on asyncio's default executor -
min(32, cpu+4), six threads on a 2-core NAS, shared with everything else - which
was survivable only while uploads were serial.
Two problems the same bundle exposed:
A printer that accepts project_file but never starts (#1678) was retried forever:
270s watchdog, revert to pending, re-upload the whole file, repeat. Hence his
"printer who, since the morning, still not launch" - and on a farm each lap also
eats an upload slot the other printers are waiting on. Attempts are now counted on
the queue item; after three it fails with a message pointing at the printer instead
of queueing a fourth re-upload.
The debug bundle we asked him for held 4m49s of history. The push_status dumps fired
on every frame rather than on change - several while their own comment claimed
otherwise - which is 27,727 of the bundle's 29,830 lines and rolls 5 MB in under five
minutes on 19 printers. They now log transitions only. The bundle also read just the
live log while three rotated backups sat next to it, under a byte budget four times
larger than the file it was reading.
Migration verified on SQLite and Postgres: idempotent, backfills legacy NULLs
(dispatch_attempts + 1 is NULL for a NULL row, which would silently disable the cap).
Tests: 6 on concurrent dispatch (overlap, cap honoured, 1 == serial, default applies
with no settings row, a failed printer does not cancel its siblings, no early return),
4 on the retry budget, 6 on the bundle's rotated-log span, 7 on the debug gating.
Each verified to fail against the unfixed code - the first end-to-end log assertion I
wrote passed without the fix and had to be tightened.
Queueing several plates of one 3MF built a single filament-override list from
every selected plate and posted that same list with each plate's item. A
force_color_match entry blocks dispatch until the printer has that exact colour
loaded, so a single-colour plate waited on the whole batch's palette. The same
shared list also widened required_filament_types, making a PLA plate refuse
every printer that lacked a sibling plate's PETG.
Narrow the overrides to the slots the plate actually consumes, on create and on
update -- in the backend, where the 3MF is, so it holds for every writer of the
queue. Dispatch already re-parsed requirements per plate and keyed overrides by
slot, so the dropped entries were inert there. When the plate's slots cannot be
read the overrides are kept whole: an item waiting on a colour it does not need
is visible, one that silently lost a forced colour prints in the wrong filament.
Items queued before this would stay stuck with a waiting reason that explains
nothing, so a startup migration re-scopes the pending ones. Printing and
finished items keep their overrides -- that is a record of what they dispatched
with, not an instruction.
Nightly backups to a mounted NAS share ran from May and then stopped, failing
with [Errno 30] Read-only file system. The reporter checked folder permissions
-- correctly: the mount is gid=backup,dir_mode=0775, the service user is in that
group, and his own shell writes to the share fine.
Errno 30 is EROFS. A permission problem is errno 13. EROFS means the filesystem
refused the write, and it refused because we told it to: our systemd unit ships
ProtectSystem=strict, which mounts everything read-only inside the service's
mount namespace and carves back out only ReadWritePaths=<install> <data> <logs>.
A NAS share is not one of those three. Reads are unaffected -- which is why the
UI happily listed his existing backups from the share while being unable to
write a new one -- and his shell is outside the namespace entirely, so every
check he could think to run said the directory was fine.
Both installers write the unit file wholesale, so a ReadWritePaths line added by
hand disappeared on the next install, taking the backups with it. They now back
the old unit up (.bak-<timestamp>) and carry the operator's extra writable paths
forward, reporting which ones they kept. The unit template documents the
carve-out.
The output directory is probed with a real write when it is saved and when the
backup card loads, so an unwritable path is caught there rather than at 03:00
for a week. On failure the card names the cause and hands over the fix with the
operator's path already in it (systemctl edit bambuddy -> ReadWritePaths=...),
and a failed run reports the same diagnosis rather than the raw OSError. EROFS
outside systemd, permission-denied, out-of-space, not-a-directory and missing are
told apart, in all 11 locales.
Docker: a backup path that is not bind-mounted is writable -- the write lands in
the container's ephemeral layer and is lost on the next compose up. The probe
compares the directory's device against the container root and warns, with the
compose snippet that mounts it properly.
Two defects, both invisible until you ask the app to stop.
Docker never shut down gracefully at all. CMD ["sh","-c","uvicorn ..."] left
the shell as PID 1 with uvicorn as its child, and dash does not forward
signals, so docker stop SIGTERMed the shell and uvicorn never heard about it.
Measured on the shipped image: the full 10s grace period, exit 137, and no
"Shutting down" line in the log. Every stop, restart and image update was a
hard kill -- no WAL checkpoint, no MQTT disconnect, no virtual-printer
teardown. `exec` makes uvicorn PID 1; the rebuilt image now stops in 1s with
exit 0 and checkpoints the WAL.
Separately, uvicorn's timeout_graceful_shutdown defaults to None -- wait
forever for in-flight requests. An MJPEG camera stream is a response that
never completes (httptools' connection shutdown() only flips keep_alive on an
in-flight cycle, it never closes the transport), so one open camera tile
pinned the process until systemd SIGKILLed at 90s. The ordering makes it
unfixable from inside the app: uvicorn fires the lifespan shutdown -- the code
that tears the streams down -- only after connections drain.
All six launchers now pass --timeout-graceful-shutdown 5: Dockerfile,
deploy/bambuddy.service, the systemd unit and launchd plist from
install/install.sh, the SpoolBuddy installer's unit, and the Windows NSSM
registration. On timeout uvicorn cancels the request tasks; the camera
generators already unwind cleanly on CancelledError.
TimeoutStopSec raised to 30s on the units and stop_grace_period: 30s added to
compose, as backstops rather than the mechanism. On Windows NSSM's default
1500ms AppStopMethodConsole was force-killing uvicorn mid-teardown; raised to
15s, with the WM_CLOSE and thread-message stages skipped (uvicorn is a console
app with neither a window nor a message loop).
A Shelly reports one energy figure — aenergy.total, a lifetime counter in Wh
that never resets. Bambuddy had a single REST energy field and filed whatever
it found under "today", so the value never reset at midnight, and Yesterday
and Total stayed at zero: get_energy() simply never set those keys.
With `total` unpopulated, the hourly snapshot recorder skipped the plug, so
the Statistics page's energy figure was zero as well, not just the Settings
card.
Split the REST energy config in two: rest_energy_path still means "used
today", rest_energy_total_path means "lifetime counter". A Shelly has only
the latter; a Tasmota behind a REST bridge has both; sharing a URL costs one
fetch, not two.
Then derive Today and Yesterday from that counter using the snapshots we were
already taking: today = counter now - counter at the last local midnight;
yesterday = the gap between the two previous midnights. Local midnight, not
UTC — a UTC boundary rolls Today over at 02:00 in Berlin. The snapshot loop
now ticks on the local hour so a reading lands on the boundary instead of up
to an hour early. A counter that goes backwards (factory reset) reports
nothing rather than a negative.
Collateral, found while verifying on both engines: the smart-plug DateTime
columns are naive UTC but the code wrote aware datetimes into them. SQLite
drops the offset; asyncpg raises DataError. So on Postgres every snapshot
capture raised inside the loop's except, and every status poll raised on
last_checked — the whole subsystem was dead on the database we recommend for
multi-printer installs. All plug timestamps are naive UTC now.
Existing REST users with a cumulative path in the today field must move it to
the new lifetime field; the form and wiki now name which counter each wants.
Cam Wall had no URL — the only way in was the toggle on the Printers page,
so it could not be bookmarked, linked, or shown on a wall-mounted screen.
Add a standalone /camwall route. Signed in, it is the wall as it was. For a
TV or Pi with no login, it authenticates with a long-lived token in the URL.
A kiosk needs the printer list and per-printer status, both of which sit
behind PRINTERS_READ. Rather than widen camera_stream to cover GET /printers
— whose response carries serial_number and ip_address, which have no business
on a screen in a shared room — add a read-only feed at
GET /api/v1/camwall/printers that serves only what a tile draws, and gate it
on a new camwall token scope. The print filename is not served at all: a token
wall renders the compact overlay, so the part on the bed is never named.
The scope is separate rather than a widening: camera_stream tokens are already
in the wild, minted to hand out video, and must not gain the ability to
enumerate a fleet by name. camera_stream is refused by the feed; camwall
passes the stream gate so its own tiles fill.
Kiosk walls drop the settings popover and click-through entirely (not merely
hidden — a passive screen must carry no focusable control it cannot act on),
cap the overlay at compact, and poll rather than open a WebSocket. maxLive,
interval and status can be set from the URL, clamped to the popover's ranges.
A server-mode VP with a target printer bound showed the print as a bare
filename in Bambu Studio / OrcaSlicer -- no stage, percentage, layer count or
time remaining. The data was already in the bridge cache; we were overwriting
it with zeros, because passing it through made the slicer read the VP as busy
and hide the Send button (#1558).
Both slicers gate the progress panel and the Send button on one predicate,
MachineObject::is_in_printing() -- gcode_state in RUNNING/PAUSE/SLICING/PREPARE
-- so there is no field-level way to have both. FINISH is the one state in the
gap: StatusPanel::update_subtask() renders the panel for it, and
SelectMachineDialog::update_show_status() does not disable Send. The VP already
parks at FINISH after each upload (#1280 / #1658), so it only needed the real
numbers underneath it.
While the target prints and no upload is in flight, the report now holds
gcode_state=FINISH and passes mc_print_stage, mc_percent, mc_remaining_time,
stg, stg_cur, layer_num and total_layer_num through from the cache. Mirroring
is suppressed during PREPARE and for 5s after the last upload transition, so
the slicer still receives the FINISH carrying its own subtask_name and releases
its send modal. print_error is never mirrored -- it would raise a modal error
dialog for a fault the VP did not throw.
The reporter found what his P1S was doing, and it is in Bambu's P1 manual:
"P1S connected AMS drying functions may only be controlled from the P1S screen."
The firmware acks ams_filament_drying with result: success and then discards it,
which is why three commands on an idle printer left the AMS 2 Pro at dry_status 0.
No command can start a cycle on a P1, on any firmware, so don't offer one.
supports_drying() now excludes the P1 series outright, replacing the 01.08+ gate
carried since #292 — that version is when P1 firmware gained AMS 2 Pro support,
not remote drying, and it was never checked against a live P1. Both drying routes
refuse with a specific 400 instead of publishing a message the printer will drop;
queue and ambient auto-drying skip P1s via the same helper.
A new drying_screen_only flag keeps the control on the card, disabled, saying why
— a P1 owner needs to learn where to dry, not watch the button disappear. A cycle
started at the printer still shows with its countdown; only Stop goes away, since
a P1 ignores stop exactly as it ignores start.
Also corrects the wiki firmware matrix, which listed P1P/P1S as supported and
(separately) P2S/H2S/H2C as unsupported. 8 tests.
extract_printable_objects_from_3mf() has accepted a plate_number since it was
written and no caller ever passed one, so it took root.find(".//plate") — the
first plate in the file. Passing one would not have helped either: the lookup
was .//plate[@plate_idx='N'], a predicate on an attribute neither Bambu Studio
nor OrcaSlicer writes. The index lives in a <metadata key="index"> child, as
threemf_tools and filament_requirements already read it, so the selector never
matched and fell back to plate 1 regardless.
On an all-plates .gcode.3mf that meant Skip Objects offered the wrong plate's
objects, with that plate's marker positions drawn over the correct plate's
thumbnail (/cover resolves the plate properly via resolve_plate_id, the object
list did not). The reporter printed a one-object plate and was shown the four
copies from another plate of the same file.
Select the plate on its index metadata, and pass resolve_plate_id(state) at all
three call sites so the list and the thumbnail share one resolver. Also stop
peek_plate_index_in_3mf() reporting plate 1 for a multi-plate file: it backs the
running one, so an all-plates upload printing plate 2+ lost its archive entirely.
upload_file_async carried a flat 600s wall-clock deadline and ran the
transfer via asyncio.wait_for(run_in_executor(...)). wait_for cancels the
future, not the executor thread. A 96 MB 3MF to an A1 over WiFi sustains
~75 KB/s and needs ~20 minutes, so the await gave up at ~70 MB, returned
False, and with_ftp_retry started a second STOR of the same file onto the
same printer while the first was still streaming. The reporter filmed two
transfers of one job climbing in parallel at 2% and 72%; the print never
landed and the printer read as having a flaky network.
The deadline is now derived from the file size against a 25 KB/s floor, so a
slow-but-healthy transfer can finish — a link that has actually died is
caught within socket_timeout by the blocking sendall, which is what should be
detecting failure. A deadline expiry now stops the transfer for real: the
worker is signalled, raises UploadCancelled from its progress callback, and
upload_file's existing cancel path breaks the send loop and deletes the
partial file. with_ftp_retry never retries that, and a per-printer lock makes
overlapping uploads impossible however they were triggered.
A spool with no readable RFID was reported by the standard AMS with an empty
tray_type and state=9 — structurally identical to a truly-empty slot at the
tray level — so the AMS card rendered it "Empty" while Bambu Studio correctly
showed "?". The authoritative "a spool is physically here" signal is firmware's
AMS-level tray_exist_bits bitmask (what Studio uses), but Bambuddy inferred
emptiness from the per-tray state/tray_type. Confirmed from the reporter's
bundle: tray_exist_bits=f (all four slots present) with tray_is_bbl_bits=5
(only slots 0,2 Bambu) — the present-but-non-Bambu slots were the ones shown
Empty. Supersedes closed#1838.
apply_tray_exist_bits() already parses the bitmask to clear stale fields on
absent slots; it now also annotates each slot with an authoritative `exists`
bool, gated behind a new annotate_exists flag so only the printer-card path
sets it. The VP bridge leaves it off, so the `exists` key never reaches the
slicer wire format. `exists` flows through the AMSTray schema/serialization to
the frontend, where getEmptySlotKind() uses it: exists===true + no tray_type
-> "?" (present, unconfigured), exists===false -> "Empty", exists absent ->
the previous state=9/10 heuristic (AMS-HT and missing-bitmask paths unchanged).
H2D/X1C already reported present-unknown slots with a non-9 state and took the
"?" path; with the fix they reach it via `exists` and are unaffected.
P1-series printers have a MicroSD slot but no reachable control to enable
"Store sent files on external storage": current P1 firmware (through
01.10.00.00) never publishes support_save_remote_print_file_to_storage, so
the Bambu Studio toggle never renders, and the P1S has no screen — leaving
store_to_sdcard stuck False with no way for the user to change it. The
external_storage check reported a permanently-unresolvable fail.
Add NO_REMOTE_STORAGE_TOGGLE_MODELS (P1S, P1P) + has_remote_storage_toggle(),
kept distinct from the no-slot NO_EXTERNAL_STORAGE_MODELS. When a model has a
slot but no reachable toggle and the option is off, the check now emits skip
with params reason=unsupported_model rather than fail, and overall no longer
escalates. A P1S reporting the option on still passes. Model-scoped and
default-open, so X1/P2S/H2 (where the fail is actionable) are unaffected; if
a future firmware surfaces the capability, drop the model and it reactivates.
The frontend DiagnosticChecklist renders a reason-specific message variant
(external_storage.skip_unsupported_model) so P1 users see an accurate
explanation instead of the generic "needs a live MQTT connection" skip text.
The fix propagates to the support-bundle diagnostic snapshot automatically.
A1 Mini firmware never emits stg_cur=22, so every completion hits the
FINISH-state fallback — which fires after the End G-code (SwapMod plate
swap) runs, capturing the swapped plate. The last-layer edge trigger
depends on catching one transient MQTT packet and is dropped
intermittently, reverting to the post-swap grab.
Bank a rolling in-print camera frame per printer, refreshed on layer
change. Because it's layer-driven it freezes when printing ends (no more
layer increases during the swap), so the last banked frame is the
finished print. The FINISH-state finish-photo path now prefers the
banked frame over a live grab; stage_22/last_layer still live-grab.
Chamber-image printers came up black on load and only recovered ~20 min
later. Two causes: (1) late fan-out subscribers got an empty queue and
waited for the next frame, so the browser never fired onLoad and the
stall-detector reconnect-looped, churning short-lived viewers; (2) the
churn reopened the port-6000 socket before the old one closed, so the
printer fed an orphaned socket until its TCP keepalive reaped it.
Prime late subscribers with the last pumped frame; make a replacement
broadcaster's pump wait for the predecessor's socket to close before
dialing (bounded 10s); require two consecutive stalled reads before the
frontend reconnects.
The Configure AMS Slot picker was hardwired to 0.4mm (nozzleDiameter
prop never passed from PrintersPage / SpoolBuddyAmsPage), so a 0.6
machine could only set 0.4 profiles on its trays. Resolve the real
installed nozzle per-AMS (ams_extruder_map on dual-nozzle) and pass it
in. Separately, nothing validated the sliced nozzle against the
installed one, so a mismatch reached the printer as a cryptic HMS
_8012 "Failed to get AMS mapping table". Add a fail-safe pre-dispatch
guard in _start_print that fails the item with an actionable message
before upload; no slice diameter or no reported nozzles = no-op.
On a dual-nozzle H2C with a Filament Track Switch, a queued print targeting
one nozzle fed a same-type wrong-colour spool: the backend mapping
(_match_filaments_to_slots) hard-filtered candidate trays to the requested
extruder, excluding the correct spool loaded in the other nozzle's AMS — which
the FTS can route across. Confirmed from the reporter's captures: same model
mapped to AMS-A slot 2 (black) on the left nozzle but AMS-B slot 3 (red) on the
right. The #1162 FTS-skip existed only in the frontend mapping, never the
queue-dispatch path.
Read fila_switch.installed in _compute_ams_mapping_for_printer and skip the
per-nozzle filter when an FTS is present. Single-nozzle printers are unaffected
(no nozzle_id in the 3MF, no FTS). Regression tests in TestFtsNozzleBypass.
The 40x30 mm box label rendered its QR too densely for low-res thermal
printers — the modules bled together and wouldn't scan. Two causes: the QR
was 20% of inner width (~7.5 mm on the narrowest template, half of the
others) and used ERROR_CORRECT_M. Fix adaptively so all templates benefit:
give the roomy-layout QR a 12 mm minimum size (box_40x30 -> 12 mm, ~3.5
dots/module at 203 dpi) and switch label QRs to ERROR_CORRECT_L (same
payload, chunkier modules; a label needs no M-level recovery). Keep the
quiet-zone border at 2 — the size+L gains suffice without risking scans.
Also add a Monochrome (black & white printer) option to the label dialog:
drops the colour swatch (a useless grey block on B&W) and widens the text;
the hex-code line still carries the colour. Threaded through the renderer,
route, API client, and modal, with translations in all 11 locales.
check_queue() read the plate-clear setting with _get_bool_setting(default=True),
but SettingsSchema.require_plate_clear defaults False and the whole frontend
treats a missing value as off. Since _get_bool_setting returns its default when
no DB row exists, installs that never saved the setting enforced the plate-clear
gate the UI showed as disabled — FINISH-state printers never dispatched and no UI
control existed to clear awaiting_plate_clear. Read the setting with default=False
so the enforced behavior matches the schema and the toggle. Both defaults shipped
together in #752; this aligns them.
get_network_interfaces() only sent Windows to the psutil path; macOS fell into
the Linux ioctl branch, whose SIOCGIFADDR/SIOCGIFNETMASK ioctls are Linux-only.
macOS/BSD have fcntl but different ioctl numbers, so every call raised OSError
and the function returned an empty list — the VP bind-interface dropdown showed
nothing. Route all non-Linux platforms through the cross-platform psutil path.
External cameras in HTTP-snapshot mode failed to load with a repeating
"connection lost" when the endpoint served PNG/WebP/BMP stills instead of
JPEG (common on IP cameras and reverse-proxied snapshot URLs). The URL
rendered fine directly in a browser, but Bambuddy's MJPEG stream wraps
every part in a hard-coded Content-Type: image/jpeg boundary, so a
non-JPEG payload labelled as JPEG made the browser reject the frame and
tear down the whole multipart/x-mixed-replace stream.
_capture_snapshot now transcodes non-JPEG stills to JPEG via OpenCV
(already a dependency). Genuine JPEG snapshots keep a byte-for-byte fast
path; truly undecodable responses (HTML error pages, auth redirects) fall
back to the previous raw-return behaviour with a single clear warning
instead of a per-frame log flood.
Native (non-Docker) installs launched uvicorn without --loop asyncio, so
uvicorn[standard] auto-selected uvloop. uvloop's SSL layer drops
already-received but still-buffered data when the client closes the data
connection without a TLS close_notify while the reader is flow-control
paused on slow storage. cmd_STOR writes each chunk to disk inside the read
loop, so a slow consumer falls behind, the tail is lost, read() returns a
clean EOF, and the loop exits with no exception -- the server acked 226 for
a file it truncated itself, then archived, queued, and forwarded the corrupt
3MF to the real printer.
Fix in two independent layers:
1. Remove the trigger: add --loop asyncio to every native launch path,
matching the Dockerfile -- deploy/bambuddy.service, install/install.sh
(systemd + launchd), spoolbuddy/install/install.sh, the Windows NSSM
service, README, CONTRIBUTING dev command.
2. Defense in depth (loop-independent): cmd_STOR now validates that a
received .3mf opens as a ZIP (reads the central directory, no
decompression) before replying 226. A truncated/corrupt file is dropped
and answered with 426, and on_file_received never runs -- so a broken
upload surfaces as an immediate slicer-side send error instead of being
archived and pushed to the printer. Scoped to .3mf; other filetypes pass
through unchanged.
Auto-drying stopped manually started (and pre-restart) AMS drying cycles
after exactly 30 minutes. The already-drying branch in _check_auto_drying()
applied a humidity-based auto-stop despite its own "track but don't stop"
comment, and the humidity re-check is unreliable: RH drops steeply in heated
air, so the sensor reads ~15-20% within minutes of the dryer starting even
with saturated filament. humidity <= threshold was thus effectively always
true, and the _min_drying_seconds=1800 floor pinned the stop to the 30-minute
mark. This also truncated Bambuddy's own preset-duration dries.
Remove the humidity-based early-stop entirely: a running dry now runs to its
configured duration (firmware stops it). Scheduling stops (print priority,
queue no longer needing the dry) are unchanged via _stop_drying(). Drop the
now-unused _min_drying_seconds.
The print-queue "auto off after this job" trigger used a second, inline
auto-off implementation (main.py, print_scheduler.py, print_queue.py)
that hardcoded wait_for_cooldown(50C, 600s) — ignoring each plug's
configured off_delay_mode / off_delay_minutes / off_temp_threshold — and
ignored the return value, powering off on the 600s timeout regardless of
print state. A print that failed and was reprinted from the touchscreen
got its power cut mid-print. The inline tasks were also uncancellable, so
a reprint couldn't abort a pending off.
Consolidate all three into SmartPlugManager.schedule_off_after_queue_job,
which schedules via the plug's configured strategy (shared with
on_print_complete through _schedule_off_per_mode) and is cancellable via
_pending_off. Add printer_manager.is_print_active() and guard the actual
power-off in _delayed_off and _temp_based_off so no path cuts power on a
loaded print. Move the on_print_start cancellation ahead of the auto_on
gate so a reprint always aborts a pending off.
Three bugs on the same PLA-model + PVA-support flow, discovered in
sequence:
(A) substitute_unused_plate_filaments inspected only object geometry
(per-object extruder metadata + paint_color triangles) so a support-
only slot was silently treated as "unused" and the user's PVA profile
got overwritten with slot 1's PLA.
(B) _extract_filament_info stripped filament_is_support==1 entries,
hiding PVA from unsliced source archive cards even when the project
explicitly configured it.
(C) --load-settings is authoritative over the source's project_settings.
config, and Bambu's shipped process presets ship enable_support=0
(supports are a per-print decision, not per-quality). So even with
(A) fixed, the sliced output had supports disabled and the PVA slot
loaded but never consumed. Inverts BambuStudio GUI's semantics where
the project overrides the preset.
Fixes:
- New extract_support_filament_slots_from_3mf reads enable_support +
support_filament + support_interface_filament from project_settings.
config; substitute_unused_plate_filaments unions it into the geometry-
derived set.
- _extract_filament_info returns all configured filament types + colours.
- New _patch_process_support_settings overlays four fields (enable_
support, support_filament, support_interface_filament, support_type)
from the source 3MF onto the picked process preset JSON before
--load-settings sees it. Deliberately targeted to what fixes#1881
without widening to a full project-over-preset merge.
Reporter (H2C + macOS 26.5.1 + BS 2.8.0.50): after every Mac sleep/wake
cycle, Bambu Studio couldn't see the VP or connect to it. Only fix was
quit BS + reboot Bambuddy. The physical printer's own cloud/LAN link
recovered in ~5 s from the same sleep — the delta was in VP session
handling.
Log evidence (bug-report-assets/logs/ddf1ede75df045cd94ad223d0f08f88a):
- 14:04:06 healthy `1Hz status push: 60 pushes/min to :54698`
- 14:04:06 → 14:09:16: five minutes of SSDP-only, no push summary for
:54698, no OSError, no disconnect line
- 14:09:16: new source port :54861 connects and authenticates fine —
the server was not rejecting reconnects
- 14:10:17 first DEBUG line: `MQTT drain timeout for
device/…/report — client may be busy` — smoking gun
Root cause: `_publish_to_report:1149` caught `asyncio.wait_for(drain,
timeout=5)` TimeoutError at DEBUG and returned silently. TimeoutError
is not OSError, so the push loop's `except OSError` at :441 never saw
it — the zombie writer sat in self._clients until the kernel's default
TCP keepalive detected the dead peer (Linux default: ~2 h 11 min).
Two hunks:
1. `_publish_to_report`: on drain TimeoutError, close the writer (best
effort, catch Exception so an already-broken close() doesn't mask
the raise) and raise BrokenPipeError, which IS OSError. Push loop
evicts on the same tick.
2. `_handle_client`: after SO_KEEPALIVE=1, set TCP_KEEPIDLE=60,
TCP_KEEPINTVL=15, TCP_KEEPCNT=4 — dead-peer detection in ~2 min
instead of ~2 h. `getattr(socket, ...)` guards keep it cross-
platform (macOS uses TCP_KEEPALIVE not TCP_KEEPIDLE, other kernels
may not expose all three — skip whichever is missing).
What I got wrong first pass and corrected on log-read: hypothesised
"missing MQTT session takeover on same client_id". Wrong. _handle_connect
parses the protocol client_id but discards it (assignment commented out
at :762), and self._clients is keyed on `f"{addr[0]}:{addr[1]}"` (socket
peer), so every reconnect gets a distinct key. No takeover race exists.
The log fixed this: the "not seen" symptom is BS-side (macOS UDP
receive after sleep + BS holding the pre-sleep socket state), but the
server-side amplifier was the zombie writer.
Non-proxy VP mode hardcoded the camera-passthrough TCPProxy to
listen_port=322 / target_port=322 regardless of the target printer's
model. That port is correct for RTSPS models (X1/X2/H2/P2S), but A1 /
A1 Mini / P1P / P1S use Bambu's proprietary chamber-image protocol on
port 6000. Result: A1/P1 targets got a 322 listener with no upstream,
OrcaSlicer Liveview failed with [2:-10061], BambuStudio's camera button
timed out.
Reporter confirmed a raw socat forwarder `<VP-IP>:6000 → <P1S-IP>:6000`
restored the stream — the target camera works, the VP just wasn't
publishing it.
Proxy mode was unaffected because SlicerProxyManager already opens 6000
(nominally file-transfer; Bambu reuses the port for chamber-image), so
the passthrough coincidentally works there.
Fix: read the target's model from
`printer_manager.get_client(target_id).model` at the same point we read
target_ip, then use `get_camera_port(target_model)` — the same source of
truth as routes/camera.py — to pick 322 or 6000. Model comes from the
physical printer, NOT self.model (the VP's spoofed identity has no
bearing on how the real device serves its camera).
Renamed the log tag from "RTSP" to f"Camera-{camera_port}" so support
bundles show which protocol the VP is fronting at a glance. Kept the
_rtsp_proxy attribute name to keep the diff tight; the block comment
spells out that it doubles as chamber-image passthrough on A1/P1.
A1 Mini firmware skips stg_cur=22 entirely, so the finish-photo fallback
fires at gcode_state=FINISH — which runs AFTER Bambu Studio has already
executed the user's End G-code. Users with SwapMod plate-swap injected
into End G-code always got a photo of the swapped (empty) plate.
Add a layer_num >= total_layer_num edge trigger in _parse_print_data so
the pre-capture fires the moment the last object layer completes, on
every printer variant. Guarded by the existing _finish_photo_captured
one-shot so stage-22 and FINISH-state hooks become no-ops for the same
print — no framing regression on AMS printers without custom end G-code.
usage_tracker's tray-switch split has never had a Spoolman peer.
An AMS same-material runout switch mid-print charged the whole slot
to the origin spool via the (via tag) path and double-credited the
backup via remain-delta — origin exceeded initial_weight.
Extract the segment-math into utils/tray_split.compute_tray_split_grams
and call it from both writers so the two inventory backends attribute
mid-print switches identically. spoolman_tracking gains
_report_spool_usage_split_by_tray_changes; the Path 2 remain-delta
fallback now skips trays the split path covered, killing the
double-count.
get_setting_detail and delete_setting were hitting
/v1/iot-service/api/slicer/setting/{id} without the version query
parameter Bambu Cloud requires — every call returned HTTP 400
"field 'version' is not set". The sibling plural GET
(get_slicer_settings) has always sent it; the comment above
_SLICER_API_VERSION documents the contract for the endpoint subtree.
Missed when the placeholder landed in the 2026-05-12 compliance rework.
Downstream effect: slicer_filament_resolver.resolve_slicer_filament's
PFUS branch swallowed the 400, fell through to normalize_slicer_filament,
and caller inventory.py generic-material-fell-back tray_info_idx to
GFL99/GFG99. BambuStudio's AMS panel reads the printer's tray_info_idx
echo, so the user saw "Generic PLA" instead of the custom cloud preset.
Masked for 50 days by two rescue paths in the caller: prior-slot
tray_info_idx reuse, and stored spool_k_profile → live state.kprofiles
realign. Reporter's spool 54 → tray 2 assign had neither.
Adjacent surfaces also fixed by the same two-line change: the delete
cloud preset UI route, the whole update_setting flow (get_setting_detail
→ delete_setting → POST), preset_resolver's cloud branch, and three
UI-facing cloud.py routes that fetch setting detail.
get_setting_detail also includes the truncated response body in the
raised BambuCloudError so the next contract change is self-diagnostic
from support-bundle logs.
Symptom: user queued a batch of 10 prints, pressed Cancel on a pending
row, the print started anyway. Repeated consecutively. Support bundle
also showed 15x "sqlite3.OperationalError: database is locked" from the
sensor history recorder in the same 8-minute window.
Root cause is a check-then-act race in _start_print. check_queue takes
a snapshot of pending items, then _start_print does FTP delete + FTP
upload (5-30s) before the unconditional item.status = "printing";
db.commit() at line 2792. /cancel commits status='cancelled' in a
separate session during that window; the scheduler's stale in-memory
write overwrites it and start_print ships. The lock-contention finding
is the same shape from a different angle: _start_print did
await db.flush() at line 2555 (after item.archive_id set + library_file
delete) which opens the SQLite WAL writer lock and holds it through
the FTP upload, queueing every concurrent writer behind it including
the user's own cancel commit.
Three guards layered:
1) Atomic CAS at the pending->printing transition. UPDATE print_queue
SET status='printing', started_at=NOW() WHERE id=:id AND
status='pending'. rowcount==0 means user won; log abort, best-effort
delete_file_async the file we just FTP'd up so it doesn't leak into
the printer's BambuStudio file picker, send queue_item_failed WS
event with reason="cancelled_mid_dispatch", return without calling
printer_manager.start_print.
2) Early db.refresh(item) + bail right after the printer connectivity
check. Saves the wasted FTP upload when the row was already
cancelled before _start_print resumed. Defense in depth; guard 1
catches the same case at the CAS point.
3) flush -> commit before the FTP block. The library-file-to-archive
promotion's writes commit cleanly, WAL writer lock releases, sensor
history and concurrent cancels stop queueing behind the scheduler.
The flush-not-commit pattern was rolling back a pointer to an
already-committed archive row, so the new behaviour matches reality
(archive committed, pointer committed, FTP unblocked).
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
The HMS error modal had three compounding bugs that surfaced when a
user forced a wrong-plate HMS (0500_8051) and tried to dispatch the
per-fault actions.
(1) IGNORE_RESUME did not ignore. Bambuddy redirected the action on
state=PAUSE to a plain `resume` command, citing a #1830 verdict that
BambuStudio's "err-bearing shape" was firmware-silently-rejected.
BambuStudio source disagrees: DeviceErrorDialog.cpp:600 dispatches
IGNORE_RESUME via command_hms_ignore, whose wire shape is
{command:"ignore", err:"<decimal>", param:"reserve", job_id:...}.
That's a distinct command from `resume` — the firmware suppresses
the next re-check AND auto-resumes in one operation. Plain resume
means "re-check normally", which is exactly why the wrong-plate
detection re-fired 1-2 s after the user clicked Ignore. The #1830
"err-bearing shape rejected" test almost certainly sent the err as
a hex shortcode; BambuStudio passes std::to_string(int m_error_code)
i.e. the DECIMAL form, which is what the firmware matches against.
(2) Action buttons read as inert badges. The button className used
`hover:${buttonHoverColor}` — a template-literal interpolation
Tailwind's JIT scanner can't see as a literal string, so the
per-severity hover utility never reached the compiled CSS. Same
bg/text color as the severity badge above and no border made it
read as another label. No disabled state and no spinner during the
2.5 s ack wait left clicks sitting silently inert.
(3) Ack-detection 502'd on legitimate ack. The route compared
(gcode_state, hms_errors-len) before vs after publish; wrong-plate
re-pause round-tripped both fields to their pre-publish values
inside the 2.5 s window → false 502 even though the firmware fully
ack'd. PROBLEM_SOLVED_RESUME working but IGNORE_RESUME 502'ing on
the same fault was the same race resolving differently.
Fixes:
bambu_mqtt.py — new hms_ignore_command() publishes the BambuStudio
shape; existing hms_ignore(persistent) renamed to hms_idle_ignore
(unchanged shape, used by NO_REMINDER_NEXT_TIME per
DeviceErrorDialog.cpp:588). Dispatch routes IGNORE_RESUME,
IGNORE_NO_REMINDER_NEXT_TIME, and DONT_REMIND_NEXT_TIME to
hms_ignore_command (BambuStudio routes all three to the same
command_hms_ignore — the "don't remind" half is the firmware's
job). NO_REMINDER_NEXT_TIME stays on hms_idle_ignore type=0. Hex →
decimal err conversion at the helper layer with a defensive
fallback. job_id=None → empty string (matches BambuStudio's
std::string default).
HMSErrorModal.tsx — getSeverityInfo loses the dead buttonHoverColor
field. Action button uses static
`bg-white/10 hover:bg-white/20 active:bg-white/30 text-white
border border-white/20`, wires
`disabled={!hasPermission||mutation.isPending}`, and renders
`<Loader2/>` only on the button whose (action,print_error) matches
mutation.variables.
printers.py — ack-detection probes `client._last_message_time`
(bumped on every MQTT push regardless of payload) rather than
diffing state fields. The pushall that follows every command
guarantees a fresh push lands inside the 2.5 s window on any
healthy printer; only firmware-silent-drop leaves the timestamp
untouched, which is the 502 path #1830 wanted.
Administrators system group sync
- Fresh installs already bootstrap with ALL_PERMISSIONS, so they always have
every permission. Upgrades previously only got what one-off backfill blocks
in seed_default_groups() explicitly listed (library:purge, archives:purge,
the OWN/ALL read-flag block, orca_cloud:auth, pipelines:*). Any Permission
enum member added without a matching block silently stayed missing on
existing admin rows. The most recent gap was printer_sensor_history:read
(Sensor History charts returned 403 for upgraded admins).
- seed_default_groups() now syncs Administrators to ALL_PERMISSIONS on every
startup: append every Permission value that isn't already on the row.
Additive only -- hand-added custom permissions are preserved.
- The pure-admin one-off backfills (library:purge / archives:purge block,
the OWN/ALL + orca_cloud:auth + legacy-read-flag block, the Administrators
branch of the pipeline backfill) are retired since the sync subsumes
them. Non-admin backfills (Operators / Viewers OWN-tier reads, Operators
orca_cloud:auth, pipelines for non-admin groups, makerworld:*, clear_plate
cross-group adders) are untouched.
- Tests: test_administrators_printer_sensor_history_read_backfilled
(regression for the reported gap),
test_administrators_sync_covers_every_current_permission (generic
invariant -- any future new permission lands on admin without needing
a one-off test), test_administrators_sync_is_additive_only (custom
permissions preserved). 12/12 backfill-migration + 102/102 broader
permission tests green; ruff clean.
Pipelines runs dashboard
- PipelineRunsPage.tsx: the Pipeline / Status / Target filter row's three
native <select> elements are replaced with a bambu-themed FilterDropdown
(button trigger, floating menu, optgroup-style headers for the Target
picker, hover + selected states with a check mark, closes on outside
click and Escape). Same value/onChange contract -- visual only.
- SlicerPipelinesPanel.tsx: wrap list?.pipelines ?? [] in useMemo so the
reference is stable when the data is stable. Fixes the
react-hooks/exhaustive-deps warning where the inline fallback returned
a fresh empty array every render, invalidating both downstream useMemo
caches (target-options + filtered-pipelines list).
The 40x30 mm box label rendered its QR too densely for low-res thermal
printers — the modules bled together and wouldn't scan. Two causes: the QR
was 20% of inner width (~7.5 mm on the narrowest template, half of the
others) and used ERROR_CORRECT_M. Fix adaptively so all templates benefit:
give the roomy-layout QR a 12 mm minimum size (box_40x30 -> 12 mm, ~3.5
dots/module at 203 dpi) and switch label QRs to ERROR_CORRECT_L (same
payload, chunkier modules; a label needs no M-level recovery). Keep the
quiet-zone border at 2 — the size+L gains suffice without risking scans.
Also add a Monochrome (black & white printer) option to the label dialog:
drops the colour swatch (a useless grey block on B&W) and widens the text;
the hex-code line still carries the colour. Threaded through the renderer,
route, API client, and modal, with translations in all 11 locales.
check_queue() read the plate-clear setting with _get_bool_setting(default=True),
but SettingsSchema.require_plate_clear defaults False and the whole frontend
treats a missing value as off. Since _get_bool_setting returns its default when
no DB row exists, installs that never saved the setting enforced the plate-clear
gate the UI showed as disabled — FINISH-state printers never dispatched and no UI
control existed to clear awaiting_plate_clear. Read the setting with default=False
so the enforced behavior matches the schema and the toggle. Both defaults shipped
together in #752; this aligns them.
get_network_interfaces() only sent Windows to the psutil path; macOS fell into
the Linux ioctl branch, whose SIOCGIFADDR/SIOCGIFNETMASK ioctls are Linux-only.
macOS/BSD have fcntl but different ioctl numbers, so every call raised OSError
and the function returned an empty list — the VP bind-interface dropdown showed
nothing. Route all non-Linux platforms through the cross-platform psutil path.
External cameras in HTTP-snapshot mode failed to load with a repeating
"connection lost" when the endpoint served PNG/WebP/BMP stills instead of
JPEG (common on IP cameras and reverse-proxied snapshot URLs). The URL
rendered fine directly in a browser, but Bambuddy's MJPEG stream wraps
every part in a hard-coded Content-Type: image/jpeg boundary, so a
non-JPEG payload labelled as JPEG made the browser reject the frame and
tear down the whole multipart/x-mixed-replace stream.
_capture_snapshot now transcodes non-JPEG stills to JPEG via OpenCV
(already a dependency). Genuine JPEG snapshots keep a byte-for-byte fast
path; truly undecodable responses (HTML error pages, auth redirects) fall
back to the previous raw-return behaviour with a single clear warning
instead of a per-frame log flood.
Native (non-Docker) installs launched uvicorn without --loop asyncio, so
uvicorn[standard] auto-selected uvloop. uvloop's SSL layer drops
already-received but still-buffered data when the client closes the data
connection without a TLS close_notify while the reader is flow-control
paused on slow storage. cmd_STOR writes each chunk to disk inside the read
loop, so a slow consumer falls behind, the tail is lost, read() returns a
clean EOF, and the loop exits with no exception -- the server acked 226 for
a file it truncated itself, then archived, queued, and forwarded the corrupt
3MF to the real printer.
Fix in two independent layers:
1. Remove the trigger: add --loop asyncio to every native launch path,
matching the Dockerfile -- deploy/bambuddy.service, install/install.sh
(systemd + launchd), spoolbuddy/install/install.sh, the Windows NSSM
service, README, CONTRIBUTING dev command.
2. Defense in depth (loop-independent): cmd_STOR now validates that a
received .3mf opens as a ZIP (reads the central directory, no
decompression) before replying 226. A truncated/corrupt file is dropped
and answered with 426, and on_file_received never runs -- so a broken
upload surfaces as an immediate slicer-side send error instead of being
archived and pushed to the printer. Scoped to .3mf; other filetypes pass
through unchanged.
Auto-drying stopped manually started (and pre-restart) AMS drying cycles
after exactly 30 minutes. The already-drying branch in _check_auto_drying()
applied a humidity-based auto-stop despite its own "track but don't stop"
comment, and the humidity re-check is unreliable: RH drops steeply in heated
air, so the sensor reads ~15-20% within minutes of the dryer starting even
with saturated filament. humidity <= threshold was thus effectively always
true, and the _min_drying_seconds=1800 floor pinned the stop to the 30-minute
mark. This also truncated Bambuddy's own preset-duration dries.
Remove the humidity-based early-stop entirely: a running dry now runs to its
configured duration (firmware stops it). Scheduling stops (print priority,
queue no longer needing the dry) are unchanged via _stop_drying(). Drop the
now-unused _min_drying_seconds.
The print-queue "auto off after this job" trigger used a second, inline
auto-off implementation (main.py, print_scheduler.py, print_queue.py)
that hardcoded wait_for_cooldown(50C, 600s) — ignoring each plug's
configured off_delay_mode / off_delay_minutes / off_temp_threshold — and
ignored the return value, powering off on the 600s timeout regardless of
print state. A print that failed and was reprinted from the touchscreen
got its power cut mid-print. The inline tasks were also uncancellable, so
a reprint couldn't abort a pending off.
Consolidate all three into SmartPlugManager.schedule_off_after_queue_job,
which schedules via the plug's configured strategy (shared with
on_print_complete through _schedule_off_per_mode) and is cancellable via
_pending_off. Add printer_manager.is_print_active() and guard the actual
power-off in _delayed_off and _temp_based_off so no path cuts power on a
loaded print. Move the on_print_start cancellation ahead of the auto_on
gate so a reprint always aborts a pending off.
Three bugs on the same PLA-model + PVA-support flow, discovered in
sequence:
(A) substitute_unused_plate_filaments inspected only object geometry
(per-object extruder metadata + paint_color triangles) so a support-
only slot was silently treated as "unused" and the user's PVA profile
got overwritten with slot 1's PLA.
(B) _extract_filament_info stripped filament_is_support==1 entries,
hiding PVA from unsliced source archive cards even when the project
explicitly configured it.
(C) --load-settings is authoritative over the source's project_settings.
config, and Bambu's shipped process presets ship enable_support=0
(supports are a per-print decision, not per-quality). So even with
(A) fixed, the sliced output had supports disabled and the PVA slot
loaded but never consumed. Inverts BambuStudio GUI's semantics where
the project overrides the preset.
Fixes:
- New extract_support_filament_slots_from_3mf reads enable_support +
support_filament + support_interface_filament from project_settings.
config; substitute_unused_plate_filaments unions it into the geometry-
derived set.
- _extract_filament_info returns all configured filament types + colours.
- New _patch_process_support_settings overlays four fields (enable_
support, support_filament, support_interface_filament, support_type)
from the source 3MF onto the picked process preset JSON before
--load-settings sees it. Deliberately targeted to what fixes#1881
without widening to a full project-over-preset merge.
maziggy