Slicing an STL via the integrated slicer always defaulted to whatever
curr_bed_type lived in the chosen process preset (typically "Cool
Plate"), which the slicer CLI rejected for high-temp filaments with
"Plate 1: Cool Plate does not support filament 1". The user had no
way to switch plates without cloning the preset in BambuStudio.
The Slice modal now exposes a Build plate dropdown with the six
canonical BambuStudio / OrcaSlicer plates (Cool Plate, Cool Plate
SuperTack, Engineering Plate, High Temp Plate, Textured PEI Plate,
Smooth PEI Plate) plus an "Auto (use process preset)" option that
preserves the previous behavior. Positioned between Process profile
and Filament rows so a long filament list never pushes it off the
modal's scrolled viewport, and always enabled regardless of whether
the user picked a Printer Preset Bundle.
A new bed_type field on SliceRequest flows through both dispatch
paths:
- Resolved-preset path: _patch_process_bed_type overwrites
curr_bed_type on the process JSON before forwarding to the sidecar.
Works end-to-end today, no sidecar change needed.
- Bundle dispatch path: slice_with_bundle adds a bedType form field
to the sidecar multipart. The sidecar (maziggy/orca-slicer-api
fork) needs a matching change to honor it as --curr_bed_type on
the CLI invocation; until then the field is silently ignored and
the slice runs with the bundle's default plate.
Picking a color preset from the catalog only copied color_name and
rgba onto the spool — extra_colors (gradient stops) and effect_type
(sparkle / wood / etc.) were silently dropped at three layers above
the API: the SpoolFormModal state shape, the CatalogDisplayColor
mapping in ColorSection, and the selectColor handler itself. All
three widened to carry both fields through.
Picking a catalog swatch now writes both fields from the entry, so
solid presets cleanly replace previous gradients. Recent-colors and
the hardcoded-fallback palette stay as plain hex pickers — they
don't touch extras/effect since they aren't full presets.
Also fixed the en-US `colour` → `color` drift in 8 locale files
that the reporter flagged.
Two regressions reported in #1336:
1. spoolMatchesQuery did not include spool.id in the predicate, so
typing a numeric Spoolman ID into the Assign Spool dialog or the
Inventory page search returned no matches. Predicate now also
tests String(spool.id).includes(q).
2. The Unassign button in the spool edit modal was permanently
disabled for Spoolman-mode spools. The modal only ever queried
the legacy spool_assignments table (keyed by spool_id), but in
Spoolman mode the assignment lives in spoolman_slot_assignments
(keyed by spoolman_spool_id). Both the lookup query and the
unassign mutation now branch on the spoolmanMode prop and call
the Spoolman-flavored endpoints.
Editing a spool's color name on Spoolman-backed inventory appeared to
accept the new value but the inventory list column and the next edit
showed it back to the subtype. Three layers stacked to produce this:
1. find_or_create_filament matches by material/name/color_hex/vendor —
color_name is intentionally not part of the match key, but on a
match it returned the existing filament's id unchanged, silently
dropping the new value.
2. The read helper falls back to subtype when filament.color_name is
empty (kept on purpose: without it Spoolman installs that don't
fill the field render every spool as "Unknown color").
3. The edit form prefilled color_name from spool.color_name — which
on those installs was the synth value. Changing subtype but not
color_name silently round-tripped the OLD subtype back to Spoolman
as if it were a real user-set color_name.
Fixes:
- find_or_create_filament now patches the matched filament's
color_name via the existing patch_filament wrapper when the request
differs. Parameter convention: None = don't touch, "" = explicit
clear, any other string = set/update. A patch failure is logged but
does not block the match.
- The PATCH route uses model_fields_set to distinguish "field omitted"
from "field explicitly set to null" (mirrors the existing
storage_location pattern at the same site).
- The map helper returns color_name_is_synthesized: bool. The edit
form leaves the input blank when true, so the user sees the real
stored state and can't accidentally round-trip the synth value back.
Create/Edit User modal previously had no hint about backend password
complexity, and the FE pre-check was only length>=6 — so any weak
password got bounced as a bare "HTTP 422" toast after the round-trip.
- New checkPasswordComplexity util mirroring backend's validator order
- Helper text under password inputs in both modals
- Submit disabled until every rule passes
- client.ts 422 parser falls back to JSON.stringify(detail) when the
mapped array is empty, so a bare status code never masks the real
Pydantic detail again
- i18n keys added in all 8 locales (EN/DE fully translated, others
per project's English-seed convention)
- 7 unit tests pinning the validator contract, including the
reporter's "12345678" input
The "Open Cloud settings" link in the MakerWorld sign-in-required banner
pointed at /settings?tab=cloud, but Settings has no cloud tab so the URL
fell back to the General tab. Bambu Cloud login lives on /profiles, which
already defaults its sub-tab to cloud.
The "Advanced" section header in LDAP settings was always
rendering the hardcoded English fallback because the translation
key was never defined. Added in en/de/fr/it/ja/pt-BR/zh-CN/zh-TW.
The Clear Plate button (and 4 other features on the Printers page) read
their state from /settings, which requires SETTINGS_READ. Granting that
permission also adds the Settings nav item and leaks SMTP/LDAP/MQTT
credentials — exactly what users were trying to avoid by giving an
operator only printers:clear_plate.
New /settings/ui-preferences endpoint returns a curated, opt-in subset
of non-sensitive fields. Matches the existing /default-sidebar-order
precedent. PrintersPage switched to the new endpoint; admin pages still
use /settings for full access.
Plugs reporting fractional watts (Kauf PLF12 / ESPHome via MQTT)
overflowed the card width. SmartPlugCard and SwitchbarPopover
already round the same field; only the printer-card badge was raw.
Smart plugs with "Show on Printer Card" enabled appear as a chip in the
HA-entities row below the main plug controls. One click cut power to the
printer instantly — including mid-print — while the main Off button right
next to it already routes through a ConfirmModal. The HA-row chip was
added later and skipped the same gating.
Branch on entity type: script.* entities keep firing instantly (fire-once
triggers, not power switches — confirming each click would be annoying),
but switch/light/anything-else entities now open a ConfirmModal first.
Reuses the same variant="danger" + running-print warning copy as the
existing power-off confirmation when status.state === 'RUNNING'.
external-spool extruder routing (#1257)
X2D with 0 AMS units and two external spools (Ext-L feeding left
extruder, Ext-R feeding right) showed "Required filament type not
found in printer" even when the matching filament was physically
loaded. Cause: useFilamentMapping derived dual-nozzle status from
ams_extruder_map being non-empty -- that map is populated from AMS
info bits, so dual-nozzle printers without AMS got an empty map
and hasDualNozzle=false. External spools then fell through to
extruderId=undefined, and the nozzle-aware filter rejected every
candidate because undefined !== 0/1.
Prefer the hardware-reported printerStatus.nozzles array length as
the dual-nozzle signal -- populated regardless of AMS configuration
-- and keep the ams_extruder_map branch as fallback for older
firmware that might not surface nozzles. Affects all dual-nozzle
printers running without AMS: X2D, H2D, X2 Pro.
Regression test pins both layers the bug straddled --
buildLoadedFilaments extruderId assignment per external spool, and
computeAmsMapping picking the correct external for a per-nozzle
requirement -- so a future change that re-breaks either fails CI.
Show an OrcaSlicer-style bed icon in the archive card's printer-name row
indicating which build plate the print was sliced for (Cool /
Cool SuperTack / Engineering / High Temp / Textured PEI / Smooth PEI),
with the full plate name in the hover tooltip. Closes the gap where
users had to remember which plate matched a re-print or open the
source 3MF in a slicer just to read the bed setting.
Card row also unified: archives with a real Bambuddy-printer
association used to render "H2D-1 GCODE ..." while slicer-only uploads
rendered "Sliced for X1C GCODE ..." -- same line, two different shapes.
Drop the "Sliced for " prefix so both render as a uniform
"<name-or-model> [bed-icon] GCODE <hash>" row, scanning identically
regardless of provenance.
Backend: new bed_type column on print_archives (idempotent ALTER TABLE
migration; SQLite + Postgres safe). Populated from curr_bed_type in
Metadata/slice_info.config (per-plate, authoritative -- that's what
got sent to the printer for the exported plate) with a fallback to
project_settings.config for older 3MF shapes. Wired through both
archive_to_response() (the hand-rolled dict converter that bypasses
from_attributes -- easy to miss) and the /rescan endpoint, so old
archives can be re-parsed via the existing per-archive Rescan button.
Backfill script (scripts/backfill_archive_bed_type.py, --dry-run
supported) re-opens every NULL archive's 3MF on disk to populate the
column. Auto-loads .env from project root before importing backend
modules (config.py reads DATABASE_URL from os.environ at import time,
not from pydantic-settings at Settings() time) and prints the resolved
DB URL with credentials redacted, so operators can confirm they're
hitting the intended database -- Postgres or SQLite.
Frontend: 6 OrcaSlicer-style PNGs ship in frontend/public/img/bed/ --
under /img/ because that path is already statically mounted; a
toplevel /bed-icons/ tried first hit the SPA catch-all and returned
index.html as text/html. New utils/bedType.ts maps slicer strings
case-insensitively, covering both Bambu Studio and OrcaSlicer naming
variants for the same physical plate. Unmapped or NULL bed_type
simply omits the icon, so cards stay clean for pre-feature archives.
Opening the GCode Viewer from a File Manager card or Archive card mounts
GCodeViewerPage as a full-height iframe inside the Layout shell. The page
rendered nothing but the iframe, so once the third-party viewer's UI took
over the content area there was no in-app affordance to return to the
originating list - only the browser's back button.
Add a thin bar above the iframe with an ArrowLeft button. The label adapts
to the entry point - "Back to Print Archives" when the URL carries
?archive=, "Back to File Manager" when it carries ?library_file=, generic
"Back" otherwise. Click prefers navigate(-1) so the user lands back in
their original list with scroll position and filters preserved; falls
back to /archives or /files when the page was opened in a fresh tab and
there's no SPA history to return to.
New gcodeViewer.{back, backToArchives, backToFiles} i18n namespace added
to all 8 locales with native translations.
Three enhancements requested by @oliboehm after the V1 label-printing
ship in #809:
- New box_40x30 single-label template (common DK/Brother roll size,
good for filament-bag and storage-bin labels). Routes through the
existing roomy layout since height >= 20 mm.
- Colour hex code (#RRGGBB, alpha-stripped, uppercase) rendered on
every label - useful when several near-identical material/colour
spools sit next to each other and the swatch alone isn't enough to
tell them apart. Skipped silently when rgba is None or malformed.
- Brand line bumped to Helvetica-Bold (was regular) and a couple of
points larger on both layouts so it reads cleanly at arm's length.
Wired through the SpoolLabelTemplate union, the modal's
TEMPLATE_OPTIONS, and the inventory.labels.templates.box40x30 i18n
key in all 8 locales (native translations for de/fr/it/ja/pt-BR/
zh-CN/zh-TW). Modal regression test widened from 4 to 5 template
buttons. Three new renderer tests pin the hex-code render, the
hex-code skip on invalid rgba, and the bold-brand font reference.
The archive card's action row crams 6 buttons into one line: 2 labelled
(Reprint + Schedule, or Slice when un-sliced) plus 4 icon-only utilities.
The labelled buttons used `flex-1` to share whatever the icon buttons
left over, with the label gated on `hidden sm:inline truncate`.
Tailwind viewport breakpoints can't see the card width. The grid grows
columns alongside viewport (md:2 lg:3 xl:4), so cards stay ~320-380 px
wide regardless of breakpoint, and the labelled buttons end up with
~30 px of space — enough to render "Re..." / "Sc..." and not much else.
Bump the label breakpoint sm: -> xl: so labels appear only at
viewport >= 1280px where the cards actually have room. Below that,
the buttons render icon-only and the existing title= attribute serves
as the hover tooltip.
Two defects in buildFilamentOptions, surfaced together:
1. The function was precedence-based — cloud presets short-circuited
the local-presets branch, silently hiding any imported Local Profile
while the user was logged into Bambu Cloud. The wiki documents the
dropdown as "merged and deduplicated" across cloud + local + built-in.
2. Cloud default presets and local presets were being collapsed by base
name (everything after "@" stripped), so all P1S/X1C/A1 variants of
"Bambu PLA Basic" rendered as a single row. The spool form is
printer-agnostic by design, so the right semantic is to show every
variant individually — the union across all printers — not collapse
them. AMS Slot is per-printer (it filters), the spool form is
union-of-all (it doesn't).
Rewrote the merge to push each cloud setting_id and each LocalPreset row
as its own FilamentOption with the full @printer suffix preserved in
displayName. Built-in dedup against cloud setting_id is kept (mirrors
ConfigureAmsSlotModal.tsx). Wired api.getBuiltinFilaments() into both
callers. slicer_filament persistence is unchanged so existing spools
keep slicing correctly.
feat(spoolman-inventory): squashed feature work for rebase onto dev
Squashed all commits from feature/spoolman-inventory-ui onto a single commit
to enable a clean rebase onto dev. Original per-commit history preserved at
backup tag backup/spoolman-inventory-ui-prerebase-20260507-105721.
chore(i18n): extend parity gate to all locales with strict/info tiers
Previously the script only inspected en/zh-CN/zh-TW, leaving de/fr/it/ja/pt-BR
drift invisible. Now locales are auto-discovered from src/i18n/locales/, and a
STRICT list (de, zh-CN, zh-TW — currently in parity) gates CI while the rest
report informationally until their drift is caught up. ja notably has 27 real
placeholder bugs worth fixing before promotion to strict.
PR #1195 (d6a31393) set Vite's base: '' to emit relative asset URLs
in the built index.html, intended as a partial improvement for
path-prefixed reverse proxies. The relative URLs broke every deep
SPA route on initial load: popup windows, direct URL paste, page
refresh on /camera/<id>, /projects/<id>, /groups/<id>/edit,
/external/<id>, /files/trash, and the SpoolBuddy kiosk paths.
Browser resolves ./assets/index-XXX.js against the document URL.
For /camera/<id>, that gives /camera/assets/index-XXX.js — the SPA
catch-all returns index.html (text/html) for that path, and modern
browsers refuse to execute HTML as a JS module under
X-Content-Type-Options: nosniff. Hence the empty-popup symptom
reported on #1221 across P1S / P2S / X1 / Docker / git / Chrome /
Firefox / Brave / Safari, plus the quieter "blank page on refresh"
on every other deep route.
Reverts the two PR #1195 lines: removes base: '' from
vite.config.ts (Vite default '/' restored, emitting absolute asset
URLs /assets/..., /manifest.json, /sw-register.js) and reverts
register('sw.js') to register('/sw.js') in public/sw-register.js.
PR #1195's class of bug — path-prefixed reverse proxy users serving
Bambuddy at a subpath — was already explicitly closed as wontfix in
that thread because supporting it requires subpath-aware
bootstrapping (API_BASE, React Router basename, PWA manifest scope,
SW scope) for every user forever. The supported alternative for that
audience stays as documented in the #1195 closing comment: NPM
(Nginx Proxy Manager) addon + Cloudflare Tunnel at a real domain
with HTTPS, then HA Webpage panel embedding via
TRUSTED_FRAME_ORIGINS — that path doesn't depend on base: '' at all.
The trade-off is intentional: revert reaches every user impacted by
deep-route initial-load bugs (much larger population than
path-prefixed proxy users), in exchange for an already-wontfixed
subpath-proxy regression that has a working alternative.
The earlier `min-h-0` fix on the spool list (61314cf2) made the
shrinkable child shrinkable, but on @elit3ge's 838px viewport the
four stacked templates (~310px) plus footer still blew past
max-h-[90vh] once Brave's browser chrome ate into vh, and
overflow-hidden on the modal clipped Avery 5160 mid-row with the
Cancel button entirely below the clipped bottom edge — no scroll
path. The screenshot showed the spool list at ~5 visible rows with
its own scrollbar still active, confirming the templates section's
natural height was the dominant problem, not the spool list.
Templates now render as a responsive grid (grid-cols-1
sm:grid-cols-2 gap-2) so the four buttons pack into a 2x2 grid
above the sm breakpoint, trimming ~150px of vertical. Per-cell
padding tightens to p-2.5, labels/hints get text-sm + truncate,
and the full strings are reachable via title="<label> — <hint>"
on each button. Footer drops py-3 to py-2 for a few extra pixels.
The min-h-0 on the spool list is kept as a belt-and-braces shrink
for any viewport tighter still. Mobile (<sm) keeps the stacked
layout — no regression there.
Long preset names like "SUNLU PETG GLOW IN THE DARK GEN2 @Bambu Lab
H2C 0.4 nozzle" were visually clipped in the Configure AMS Slot
modal's preset picker. With several near-identical entries differing
only in nozzle size, users had to open browser dev tools to tell
them apart.
A `title={preset.name}` alone was too slow visually — browsers wait
500-1000ms before rendering native tooltips. The row now un-truncates
inline on hover via group-hover:whitespace-normal + break-all, so the
full name appears the moment the cursor enters the row. `truncate`
stays as the default to keep the list compact when scanning.
The native `title={preset.name}` is also kept as a belt-and-braces
fallback for assistive tech and touch devices where :hover doesn't
fire. Both desktop and mobile layouts updated.
Test: new ConfigureAmsSlotModal.test.tsx regression that pins the
truncate / group-hover:whitespace-normal / group-hover:break-all
classes on the span, the title attribute, and the `group` class on
the parent button — so a future refactor that drops any of those
fails CI.
feat(spoolman-inventory): squashed feature work for rebase onto dev
Squashed all commits from feature/spoolman-inventory-ui onto a single commit
to enable a clean rebase onto dev. Original per-commit history preserved at
backup tag backup/spoolman-inventory-ui-prerebase-20260507-105721.
Closes the loop on the bundle work: users who imported a Printer
Preset Bundle via Settings → Slicer Bundles can now pick it in the
SliceModal and slice through the bundle dispatch path the backend
already supports.
UX:
- New "Slicer bundle" picker at the top of the modal, rendered only
when at least one bundle is imported (GET /slicer/bundles non-empty)
- Selecting a bundle replaces cloud/local/standard preset dropdowns
with bundle-scoped pickers (process + per-slot filament names from
the bundle). Printer is implicit (each .bbscfg has exactly one).
- Submit routes through SliceRequest.bundle so the backend skips
PresetRef resolution and asks the sidecar to materialise the JSON
triplet from the stored bundle by name.
- "None" leaves the modal on the original preset triplet path.
Frontend types: SliceBundleSpec + bundle?: SliceBundleSpec on SliceRequest.
Until the preview slice / embedded-metadata read returns the per-plate
filament list, the modal renders a synthetic single-slot fallback so
the auto-pick has something to bind against. That made the Slice button
enabled the moment the modal opened, even before the slicer had told us
which AMS slots the plate actually consumes — clicking would dispatch
against opaque defaults.
Add filamentReqsQuery.isSuccess to the isReady chain so the button
stays disabled while the preview slice is in flight (or before the
backend's /filament-requirements call settles for sliced files) and
flips to enabled the moment the real slot list lands and auto-pick
fills it.
The SliceModal's preview slice runs against unsliced project files to
discover per-plate AMS slot consumption. Until now it always used
slice_without_profiles — accurate slot mapping (a model property) but
gram numbers were derived from the file's embedded process settings,
which can drift from the triplet the real print will use.
When the caller provides a bundle id + printer/process/filament preset
names, get_preview_filaments now routes through slice_with_bundle so
the preview's gram numbers match what the real print will produce.
Cache key picks up a bundle-context fingerprint so different bundle
picks on the same file occupy distinct entries.
Backend:
- slice_preview.get_preview_filaments: optional bundle_* params
- library.py + archives.py: forward params via /filament-requirements
Frontend (forward-compat for the upcoming SliceModal Bundle tier):
- api.getLibraryFileFilamentRequirements / getArchiveFilamentRequirements
accept an optional 4th-arg bundle context object
Closes the longest-standing inventory gap — finding a specific spool
in a closet of 50 partials. Per-spool icon button on every inventory
card and table row, plus a "Print labels..." header action that opens
a multi-select picker pre-loaded with the currently filtered spools.
Four pre-built templates: AMS holder (30 x 15 mm) for the popular
Makerworld AMS Filament Label Holder, single box label (62 x 29 mm)
for Brother PT/QL or Dymo small labels, Avery L7160 (A4, 21 per
sheet), and Avery 5160 (US Letter, 30 per sheet). Each label carries
the colour swatch (with multi-colour gradient stripes for spools
with extra_colors set), brand, material, name, the *spool ID*
(bsaunder's articulated user-need: telling 8 spools of "PLA White"
apart, especially partials), and a QR code that deep-links to
/inventory?spool=<id> for phone-scan round-trips. Box-label adds
storage location; AMS-holder drops the QR — at 30 x 15 mm there is
no room for swatch + text + QR without truncating away the spool ID,
and AMS-bay identification is at arm's length where the swatch and
ID are enough.
Server-side rendering via ReportLab + qrcode (already a dep). Pure
Python, no headless browser, no system libs. Output is byte-identical
across browsers, Avery sheets align to <0.1 mm, and bulk export is
one click for one PDF. Two endpoints — POST /inventory/labels (local
DB) and POST /spoolman/labels (Spoolman-backed) — gated on
INVENTORY_READ, capped at 500 spools per request, returning
application/pdf via StreamingResponse. The renderer is decoupled
from the SQLAlchemy model via a LabelData dataclass so the same code
path serves both modes.
Modal picker scales to large libraries: search (substring match
across name / brand / #ID), material filter chips derived from the
visible spools, additive Select-all-visible / Deselect-visible /
Clear-all actions so selections survive filter changes. Restyled
twice in development — first cut used generic Tailwind which clashed
with the inventory's bambu-dark palette; second cut switched to
bambu-dark-secondary / bambu-green / bambu-gray to match.
Two render bugs found during visual inspection of generated PDFs and
fixed before commit:
1. AMS-30x15 template originally produced labels with only swatch
+ QR and no text at all — the side-by-side layout left <5 mm
for the text column, so the renderer bailed without drawing
anything. Layout split into tight (h<20mm) and roomy (h>=20mm)
regimes; tight regime drops the QR and gives the right column
to brand + material + a 13pt-bold spool ID.
2. Box-62x29 template aggressively truncated text — swatch + QR
each at ~14 mm on a 26mm-tall label squeezed the text column
to ~16 mm, turning "Polymaker Ivory" into "Polymak..." and
"Polymaker . PLA . Matte" into "Polymaker ...". Swatch capped
at 16 mm, QR capped at 18 mm and constrained to ~20% of width,
leaving the text column ~30 mm — full names render without
truncation.
Both bugs pinned by regression tests in test_label_renderer.py that
render with pageCompression=0 so the resulting PDF bytes contain the
text as ASCII and `assert b"Polymaker" in pdf` works.
The SpoolBuddy "weigh-then-assign" workflow tried to configure an empty AMS
slot at assign time, but Bambu firmware silently drops ams_filament_setting
and extrusion_cali_sel for unloaded slots — the MQTT calls completed and the
modal closed, yet BambuStudio kept showing the slot as default-PLA forever.
assign_spool now detects an empty target slot (fingerprint_type empty) and
persists the SpoolAssignment without publishing MQTT, returning a new
pending_config flag so the frontend can swap "Assigned!" for "Slot will
configure when you insert the spool." on_ams_change watches for the slot
to load (state == 11, which fires for 3rd-party tags too even when
tray_type stays empty) and replays the deferred ams_filament_setting +
extrusion_cali_sel — including the printer-kp realignment that converts
PFUS-prefix cloud user presets to the P-prefix local-preset filament_id
the slicer actually accepts.
The full assign-time MQTT block was extracted into
apply_spool_to_slot_via_mqtt so both the assign endpoint and the
on_ams_change replay path use the same resolution logic; the helper takes
~270 lines of duplication out of assign_spool.
The Tailscale toggle was supposed to obtain a publicly-trusted Let's Encrypt
cert via `tailscale cert` so users wouldn't need to import Bambuddy's CA into
the slicer. End-to-end testing showed this was always going to fail:
- Bambu Studio and OrcaSlicer refuse hostname input in the Add Printer
dialog (IP-only).
- Their printer-MQTT trust path validates only against the bundled BBL CA
store (`printer.cer`), NOT the system trust store. Confirmed against
ClusterM/open-bambu-networking's clean-room reimplementation:
`mosquitto_tls_set(BBL_CA)` + `verify_peer=1` + `tls_insecure=true` —
chain validation against BBL CA only, hostname check intentionally
skipped (because Bambu's printer cert CN is the device serial).
- LE certs don't chain to BBL CA, so the slicer rejects with the
well-known "-1" before any hostname/IP logic runs.
The cert-import step is unavoidable; LE provisioning was dead code for slicer
connections. Pivot:
- Toggle stays as an informational marker — when ON, the VP card surfaces
the host's Tailscale IP + MagicDNS hostname so users know what to paste
into the slicer.
- Cert is always self-signed (signed by `bbl_ca`).
- Tailscale exposure is via the existing bind_ip dropdown, which already
includes `tailscale0` IPs.
- Tailscale's role is strictly network reach — same trust burden as LAN.
Backend cuts:
- `tailscale.py`: `provision_cert`, `ensure_cert`, `cert_needs_renewal`,
`_FQDN_RE`, `_HTTPS_DISABLED_RE`, `TS_CERT_EXPIRY_THRESHOLD_DAYS`,
`cryptography` import. Keep `get_status` and `TailscaleStatus`.
- `certificate.py`: `ts_cert_path`, `ts_key_path`, `use_tailscale_cert`.
- `manager.py`: `tailscale_fqdn` field, `_cert_renewal_task`,
`_cert_restart_task`, `_cert_renewal_loop`, `_restart_for_cert_renewal`,
`_cancel_renewal_task`, `_cancel_restart_task`. Simplify
`_resolve_cert_and_advertise` to a sync method that just generates the
self-signed cert. Drop `tailscale_disabled` from the change-detection
diff (toggle is informational — no service restart needed).
- `routes/virtual_printers.py` + `routes/settings.py`: drop the
`tailscale_not_available` 409 guard on toggle-enable.
Frontend cuts:
- `VirtualPrinterCard.tsx`: FQDN/IP display sourced from
`multiVirtualPrinterApi.getTailscaleStatus()` (host-level) when toggle
is ON, instead of `printer.status.tailscale_fqdn` (cert side-effect,
no longer populated). Drop the `tailscale_not_available` toast handler.
- `api/client.ts`: drop `tailscale_fqdn` from the VP status type.
- i18n: rewrite `tailscaleDisabled.description` in all 8 locales to drop
the "no cert import" promise. Remove `toast.tailscaleNotAvailable` key.
Docs:
- Wiki `features/virtual-printer.md`: rewrite the entire Tailscale section
— remove the LE-cert + HTTPS-Certs-toggle + tailscale-cert-operator
steps, document the toggle as informational, keep the Docker socket
mount + LXC TUN troubleshooting (those still apply for daemon
reachability).
- README: drop "the Tailscale benefit here is the tunnel, not cert-import
elimination" framing in favour of "surfaces the IP for paste into
slicer; CA import unchanged because BBL CA store, not system trust
store, is what gets validated".
Tests:
- `test_tailscale.py`: reduced to surviving `get_status` cases (binary
missing, command fails, success, empty DNSName, malformed JSON).
- `test_virtual_printer.py::test_sync_from_db_restarts_on_tailscale_disabled_change`
→ `test_sync_from_db_does_not_restart_on_tailscale_toggle` (toggle is
informational; `remove_instance` must NOT be called).
- `test_virtual_printer_api.py::TestVirtualPrinterTailscaleGuardAPI` →
`TestVirtualPrinterTailscaleToggleAPI` (single test asserts both
directions succeed and daemon is never consulted).
- `VirtualPrinterCard.test.tsx`: mock now stubs `getTailscaleStatus`;
FQDN-copy block drives data through that query.
DB column `tailscale_disabled` is kept (persists toggle state) — Postgres-
safe column drop is harder; future cleanup can remove if the toggle goes
away entirely. LE cert files on disk (`virtual_printer_ts.{crt,key}`) are
left in place per VP — harmless residue, manual cleanup if desired.
Verified: ruff clean, 2484 backend unit tests pass, 17 frontend VP-card
tests pass, frontend build succeeds, live service restart confirms VPs
serve `issuer=CN=Virtual Printer CA` on the Tailscale interface — slicer
trusts the user-imported bambuddy CA and skips hostname checks, so MQTT
connection succeeds end-to-end.
Pre-fix, _background_notifications in main.py:3434 built archive_data
with print_time_seconds (the slicer's pre-print estimate parsed from
the 3MF at archive creation), and notification_service.py:909 formatted
that field straight into the {{duration}} template variable. A print
cancelled 2 minutes into a 3-hour estimate notified "duration: 3h".
Compute actual_time_seconds from started_at/completed_at in main.py and
add it to archive_data. notification_service.py prefers it, falls back
to print_time_seconds when the actual can't be derived.
Also add "cancelled" to the list of statuses that get completed_at set
in update_archive_status — pre-fix only completed/failed/aborted got a
timestamp, so queue-UI cancellations had no actual elapsed to compute
from. Audited every completed_at consumer; none depend on NULL to mean
"cancelled" (status field already carries that signal), and the
statistics-totals aggregation gets more accurate too as a side effect.
3 new regression tests in TestNotificationVariableFallbacks pin the
{{duration}} variable contract (actual wins over estimate; estimate
falls in when actual is missing; "Unknown" when both absent).
go2rtc and several IP cameras still emit a warm-up / black frame on every
fresh MJPEG connection — even with the v0.2.4b2 warm-up-skip fix it
slipped through intermittently for @nkm8's setup. His own bisect named
the clean solution: go2rtc exposes /api/frame.jpeg as a dedicated
single-frame endpoint that never returns the encoder's stale keyframe.
Adds an optional external_camera_snapshot_url column on printers. When
set, every single-frame capture path (snapshot endpoint, [SNAPSHOT]
notification thumbnails, [PHOTO-BG] finish photo, layer timelapse,
Obico ML, plate-detect / calibrate-plate) routes through _capture_snapshot
on the override URL via plain HTTP GET, bypassing the warm-up dance.
Live view stays on the configured stream URL — only single-frame
captures use the override. Override is camera-type-agnostic. SSRF guard
applies (existing _sanitize_camera_url allowlist). Empty string treated
as unset.
Settings UI: new "Snapshot URL (optional)" input + Test button under
External Cameras, hidden for camera_type=snapshot since the live URL is
already a single-frame source. en + de fully translated; 6 other locales
seeded with English copy.
5 backend tests pin the routing contract; 3 frontend tests pin the
input + debounced PATCH. Documented in
bambuddy-wiki/docs/features/camera.md with the go2rtc example.
Vite's default base of '/' baked absolute asset URLs into the built
index.html (/assets/..., /manifest.json, /img/..., /sw-register.js),
so any path-prefixed reverse proxy (Traefik, nginx subpath, Cloudflare
Tunnel with path routing) served the SPA as a blank white page — the
browser requested assets from the host root and got HTML or text/plain
back, triggering MIME-mismatch errors on every stylesheet/script.
Set base: '' in vite.config.ts so the HTML transform emits relative
URLs everywhere. Update public/sw-register.js to register('sw.js')
(relative) so SW scope auto-pins to whatever subpath the document
loaded from.
Out of scope: API_BASE in client.ts is still absolute. The supported
HA embedding path remains Webpage panel + TRUSTED_FRAME_ORIGINS, not
HA Ingress (subpath-aware SPA bootstrapping has too many failure modes
around PWA scope, push subscriptions, and deep-link reloads to take on
in core). Documented explicitly in docker.md.
Reported by @Spegeli, follow-up to #1167.
paho's default max_inflight_messages=20 silently fills on Bambu's broker
after ~16-20 cumulative commands per session, leaving publish() returning
success while packets sit in paho's internal queue. force_reconnect heals
it because the inflight queue is per-session, but it costs one wasted
user action to trigger.
Lifting the ceiling to 1000 keeps QoS=1 untouched (deliberately chosen
for cross-model reliability — A1, P1S, X1C, H2D, P2S, X2D all need it)
and removes the inflight queue as the bottleneck without changing
wire-protocol behaviour. The 0.2.4b2 watchdog reconnect stays as
defence-in-depth.
Diagnosis credit: RosdasHH's QoS=1/0/2 bisect on #1164.
The ams_load_filament / ams_unload_filament MQTT primitives existed
in bambu_mqtt.py but were unused — no HTTP route and no UI. Surface
both as POST /printers/{id}/ams/load?tray_id={int} and
POST /printers/{id}/ams/unload, gated on PRINTERS_CONTROL.
Wire them into the existing AMS slot popover (next to "Re-read RFID")
and add a popover wrapper on the external spool slot which had none.
Hidden while the printer is RUNNING, mirroring the RFID re-read
gating. Both buttons enabled when permission is granted; the printer
no-ops gracefully if there's nothing to do (matches BambuStudio).
Dual-extruder H2D Ext-R support is the trickier piece. The existing
ams_load_filament(254) capture came from a single-extruder printer
and used slot_id=254, curr/tar=-1. Captured the Ext-R command from
BambuStudio fresh: it sends ams_id=255, slot_id=0 (the right
extruder index, NOT a slot index), target=255, and curr/tar = the
actual right-nozzle temp (read from state.temperatures["nozzle_2"],
falling back to 215 °C if cold so the printer doesn't reject the
command on a nonsensical temp). Added that as a new branch in
ams_load_filament; the existing tray_id=254 branch is preserved
verbatim — no risk of regression on single-external setups.
Edward's diagnosis was exact: the manual /print-queue/ POST extracts
filament requirements from the 3MF and writes
required_filament_types + filament_overrides + ams_mapping onto the
queue item, but the VP queue-mode write path skipped all of that.
Net effect: scheduler reached its model-only-matching fallback and
auto-dispatched onto whatever printer was free regardless of loaded
colour.
Extract the scheduler's existing _get_filament_requirements 3MF
parser into a shared helper so the VP path can reuse it. VP's
_add_to_print_queue now populates required_filament_types
unconditionally (cheap; helps the scheduler reject obvious type
mismatches) and writes filament_overrides with force_color_match:
true per consumed slot when a new per-VP queue_force_color_match
toggle is on. Default off to preserve current behaviour for
upgraders.
UI: new toggle on VirtualPrinterCard, mode-gated to print_queue,
mirroring the existing auto-dispatch toggle. i18n: en + de
translated, other 6 locales seeded with English copy.
Schema: one nullable column on virtual_printers
(queue_force_color_match BOOLEAN, default 0/FALSE).
11 new backend tests (8 for the extracted parser, 3 for the VP
write path) + 6 new frontend tests (toggle render gating, default
state, click posts queue_force_color_match in update body).
Existing scheduler tests pass against the refactored helper.
README, CHANGELOG, website features page, and wiki virtual-printer
page all updated.
@smandon flagged the 40×40 cover thumbnail as too small to recognise
the print and asked for a click-to-enlarge full preview. Enlarging
the thumbnail itself would shift the card grid layout, so keep the
small thumbnail and show a 384×384 hover popover with the full image
in ``object-contain`` rendering (so tall MakerWorld photos aren't
cropped to a square).
Why a portal: ProjectCard carries ``overflow-hidden`` (rounded
corners + color accent bar), so any in-tree popover gets clipped the
moment it extends past the card. Rendering via
``createPortal(..., document.body)`` escapes every ancestor clipping
context, and ``position: fixed`` with measurements from
``getBoundingClientRect()`` keeps the popover pinned next to the
thumbnail regardless of grid position. ``pointer-events-none`` on the
popover so it can't intercept hover and create a flicker loop;
``z-[100]`` so it stacks above sibling cards.
Edge handling: if the thumbnail is near the viewport's right edge the
popover flips to the LEFT side of the thumbnail; vertical position is
clamped so the popover never overflows the window top or bottom. The
thumbnail's own ``onClick`` is ``stopPropagation``'d so hovering the
popover area never accidentally triggers the parent card's
"open project" navigation.
Tests: 2 new ``ProjectsPage.test.tsx`` cases — mouseenter mounts the
popover at document.body level (not nested in the card subtree, which
would re-introduce the clipping bug, and the assertion catches that);
mouseleave unmounts it; the popover img points at the same
cover-image URL as the small thumbnail with ``object-contain``; cards
without a cover_image_filename never mount the portal-rendering
component.
@maugsburger surfaced four bugs against the original #1154 multi-colour
swatch work:
1. Editing an existing spool always opened with the Extra Colours field
blank, even when the COLOR preview banner above it was rendering
correctly from the saved data. ColorSection seeded its local
``extraColorsDraft`` via ``useState(formData.extra_colors)`` at
mount time, but SpoolFormModal opens *before* its own useEffect
populates ``formData`` from the spool record — so by the time the
saved value landed, the input had already locked onto ''. The user
then had to retype the value before saving anything else.
2. Dual Color and Gradient produced the same diagonal blend
(``linear-gradient(135deg, A, B)``), so the two variants were
visually indistinguishable. The whole point of the Dual Color variant
is that the spool has two distinct bars on the reel — a smooth blend
defeats it.
3. Sparkle was almost invisible on card-sized swatches. The original
4-dot pattern (each ~1px) read fine on the inline 20×20 swatch but
disappeared on the 60-pixel inventory card banners — exactly where
the user actually identifies a spool.
4. Checkerboard cell density scaled with the swatch — the same 4-cell
pattern was either tiny squares on a small swatch or four huge
squares on a card-sized banner. The user couldn't tell a translucent
filament from a multi-colour one because the indicator changed shape.
Fix:
- ``ColorSection.tsx``: ref-guarded ``useEffect`` resyncs the draft
whenever the parent's ``formData.extra_colors`` changes via an
external update. ``commitExtraColors`` updates the ref before
calling ``updateField`` so live user typing is round-tripped without
the resync useEffect clobbering it.
- ``filamentSwatchHelpers.ts: buildColorLayer``: branch on
``effect_type``. ``dual-color`` and ``tri-color`` produce
``linear-gradient(to right, c1 0 X%, c2 X% Y%, ...)`` with CSS
double-position stops (hard line, not blend) and equal-width
segments. ``gradient`` keeps the original 135° smooth blend. The
``multicolor`` conic-gradient path is untouched.
- ``filamentSwatchHelpers.ts: EFFECT_OVERLAYS.sparkle``: bumped from 4
dots to 13 flecks in mixed sizes (1 / 1.5 / 2 px) and varying
opacity (0.65 → 1.0) for a depth-of-field "metal flake" feel.
- ``filamentSwatchHelpers.ts: buildFilamentBackground``: now returns
``{ backgroundImage, backgroundSize }`` so per-layer sizes can be
applied — painted layers stay ``cover``, the checkerboard gets a
fixed 12px tile so cell density is constant regardless of element
size. Updated the three existing call sites (``InventoryPage`` group
banner + spool card, ``ColorSection`` preview) to spread the style
object directly. ``FilamentSwatch.tsx`` composes the same per-layer
sizing inline so its output stays in lockstep.
Tests: 8 new frontend cases pinning the four fixes — Dual/Tri Color
hard-split (3 tests + 1 regression guard that Dual ≠ Gradient for the
same stops), Sparkle prominence (≥ 10 distinct radial-gradient layers
in the rendered background), checkerboard density (last backgroundSize
layer is a fixed pixel value, not ``cover``), 4 hydration cases (fills
when formData arrives via parent update, resyncs when the spool
changes mid-form, doesn't clobber live user typing, clears when the
new spool has no extra_colors). Existing buildFilamentBackground tests
updated for the new return-object shape. Full frontend suite: 1610
passed; full backend suite: 3598 passed; no regressions.
@maugsburger surfaced two bugs against the original #1154 multi-colour
swatch work:
1. Editing an existing spool always opened with the Extra Colours field
blank, even when the COLOR preview banner above it was rendering
correctly from the saved data. ColorSection seeded its local
``extraColorsDraft`` via ``useState(formData.extra_colors)`` at
mount time, but SpoolFormModal opens *before* its own useEffect
populates ``formData`` from the spool record — so by the time the
saved value landed, the input had already locked onto ''. The user
then had to retype the value before saving anything else.
2. Dual Color and Gradient produced the same diagonal blend
(``linear-gradient(135deg, A, B)``), so the two variants were
visually indistinguishable. The whole point of the Dual Color variant
is that the spool has two distinct bars on the reel — a smooth blend
defeats it.
Fix:
- ``ColorSection.tsx``: ref-guarded ``useEffect`` resyncs the draft
whenever the parent's ``formData.extra_colors`` changes via an
external update (modal opening with a spool, or switching to a
different spool mid-form). ``commitExtraColors`` updates the ref
before calling ``updateField`` so the user's own typing is round-
tripped without the resync useEffect clobbering it.
- ``filamentSwatchHelpers.ts``: ``buildColorLayer`` now branches on
``effect_type``. ``dual-color`` and ``tri-color`` produce
``linear-gradient(to right, c1 0 X%, c2 X% Y%, ...)`` with CSS
double-position stops — the colour change is a hard vertical line
rather than a blend region — and equal-width segments across N stops.
``gradient`` keeps the original 135° smooth blend. The
``multicolor`` conic-gradient path is untouched.
Tests: 4 new ``FilamentSwatch.test.tsx`` cases pinning the hard-split
contract (Dual Color uses ``to right`` not ``135deg``; Tri Color
renders 3 equal hard-split bars; ``gradient`` keeps the smooth
diagonal; explicit regression guard that Dual Color and Gradient never
produce the same CSS string for the same stops). 4 new
``ColorSectionExtraColorsHydration.test.tsx`` cases pinning the input
hydration (fills when formData arrives via parent update, resyncs when
the spool changes mid-form, doesn't clobber live user typing, clears
when the new spool has no extra_colors). Full frontend suite: 1608
passed; full backend suite: 3598 passed; no regressions.
The minor "Sparkle could be more prominent / checkerboard denser"
feedback in the same comment is deferred to a separate cosmetic pass —
the reporter flagged it as finetuning.
@smandon retested the original #1152 fix on the latest daily and surfaced
two distinct holes:
1. ``Path(name).stem`` only strips the *last* suffix, so Bambu Studio's
default ``Plate_1.gcode.3mf`` exports landed in the archive UI as
``Plate_1.gcode`` — never the bare ``Plate_1`` the user expected.
2. The pending-uploads review card always showed the raw FTP filename,
while the eventual ``PrintArchive.print_name`` resolved from the 3MF's
embedded title (or, with the toggle on ``filename``, the stripped stem).
Net effect: same upload showed two different names depending on which
view you were looking at, with no way for the toggle to flip both
views in lockstep.
Three changes:
- ``resolve_display_stem`` helper in ``services/archive.py`` strips
``.gcode.3mf`` / ``.3mf`` / ``.gcode`` (case-insensitive). Applied at
the archive-creation site so ``Plate_1.gcode.3mf`` → ``Plate_1`` for
every flow that produces a ``PrintArchive`` row.
- ``PendingUpload.metadata_print_name`` (new nullable column) is
populated at FTP-receive time by peeking at the 3MF's embedded title
via the existing ``ThreeMFParser``. Read happens once per upload —
the list endpoint then doesn't have to reopen each 3MF on every
render. Parser failures are swallowed and the column stays NULL;
the response model gracefully falls back to the stripped filename.
- ``PendingUploadResponse.display_name`` is a computed field that
mirrors ``archive_print``'s exact precedence — ``filename`` toggle
→ stripped stem; ``metadata`` toggle (default) → cached title or
stripped stem. The frontend's review card reads it (with
``upload.filename`` as a defensive fallback) and surfaces the raw
FTP filename via tooltip so users can still inspect what arrived.
Migration is one idempotent ``ALTER TABLE pending_uploads ADD COLUMN
metadata_print_name VARCHAR(255)`` (Postgres/SQLite-safe). Pre-migration
rows have NULL and degrade to filename-stem behaviour without any
operator action.
Tests: 14 unit tests in ``test_archive_display_stem.py`` covering the
canonical normalisation rules (Bambu Studio default name, mixed case,
dots-in-the-middle, edge cases like ``.gcode.3mf``-only, full-path
inputs); 6 integration tests in ``test_pending_upload_display_name.py``
pinning the response contract (default toggle uses metadata title when
present, falls back to stripped stem when absent, ``filename`` toggle
overrides metadata, ``filename`` toggle still strips the double suffix,
``GET /{id}`` exposes the same field, whitespace-only metadata behaves
like absent); 3 frontend tests in ``PendingUploadsPanel.test.tsx``
pinning the review card's render path (resolved name shown, fallback
to filename when display_name is empty, raw filename available via
tooltip). Full backend suite: 3598 passed; frontend build clean; no
regressions in any flow that previously processed ``.3mf`` /
``.gcode`` / non-3D filenames.
Tim (@turulix) is building a fully automated headless slicing pipeline
against Bambuddy's API and hit the wall flagged in #665: /cloud/* routes
resolve cloud_token per-user from User.cloud_token, but the auth gate
returned None for API-keyed requests, so the route fell back to the
global Settings-table token, which only carries a value in auth-disabled
deployments. Net effect on auth-enabled deployments: API keys reached
the gate just fine, then /cloud/filaments always saw user=None and
returned 401 / empty results — no path to read slicer presets or the
filament catalogue that a CLI workflow needs.
Make API keys carry an owner and route /cloud/* lookups through that
owner; gate the new capability behind an explicit opt-in scope so
existing automation doesn't gain cloud-read access on upgrade.
- APIKey gains user_id (FK to users.id, ON DELETE CASCADE) and
can_access_cloud (BOOLEAN DEFAULT 0). User-delete route also runs an
explicit DELETE FROM api_keys WHERE user_id = ? since SQLite ships
FK enforcement off — same pattern as the existing created_by_id
cleanup blocks.
- New cloud_caller dep on /cloud/* routes resolves to the JWT user OR
the API-key owner stashed by a router-level gate. The auth gate itself
continues to return None for API keys so #1182's surface stays bounded
to /cloud/* — without that bound, any route that fences API keys via
`if current_user is None: raise 403` (e.g. long-lived-token
management) would silently start accepting them.
- The /cloud/* router-level dep enforces three independent fences for
API-keyed callers: user_id IS NOT NULL (legacy keys → 401 with
recreate copy), can_access_cloud=True (otherwise 403), and owner has
cloud_token (existing fence, unchanged). Two extra one-shot fence
errors at create/update time refuse can_access_cloud=True when auth
is disabled or the key is ownerless.
- Frontend: APIKey list shows "Cloud" badge on cloud-enabled keys and
"Legacy" badge on ownerless rows; create form gains an "Allow cloud
access" toggle, default off. New i18n keys in all 8 locales (en + de
fully translated, others seeded with English fallbacks pending native
translation — matches the project's flow for newly-added features).
Migration: two idempotent ALTER TABLE statements + an index on user_id
for the auth gate's owner→keys lookup. Postgres-safe.
Tests: 9 backend integration tests in test_api_key_cloud_access.py
covering creation flags, the three /cloud/* fences, JWT no-op, and
deletion CASCADE; 2 frontend SettingsPage tests pinning the badge
matrix and the create-form contract; 5 daemon unit tests for the
related SpoolBuddy ssh-key sync work that landed in the same branch.
Full backend suite: 3578 passed; full frontend suite: 1597 passed; no
regressions.
Permission semantics for existing keys: keys created before this
release become "legacy" and are rejected at /cloud/* with the recreate
message. Every other endpoint they were used against — queue, status,
control — is untouched.
maziggy