The Tailscale toggle was supposed to obtain a publicly-trusted Let's Encrypt
cert via `tailscale cert` so users wouldn't need to import Bambuddy's CA into
the slicer. End-to-end testing showed this was always going to fail:
- Bambu Studio and OrcaSlicer refuse hostname input in the Add Printer
dialog (IP-only).
- Their printer-MQTT trust path validates only against the bundled BBL CA
store (`printer.cer`), NOT the system trust store. Confirmed against
ClusterM/open-bambu-networking's clean-room reimplementation:
`mosquitto_tls_set(BBL_CA)` + `verify_peer=1` + `tls_insecure=true` —
chain validation against BBL CA only, hostname check intentionally
skipped (because Bambu's printer cert CN is the device serial).
- LE certs don't chain to BBL CA, so the slicer rejects with the
well-known "-1" before any hostname/IP logic runs.
The cert-import step is unavoidable; LE provisioning was dead code for slicer
connections. Pivot:
- Toggle stays as an informational marker — when ON, the VP card surfaces
the host's Tailscale IP + MagicDNS hostname so users know what to paste
into the slicer.
- Cert is always self-signed (signed by `bbl_ca`).
- Tailscale exposure is via the existing bind_ip dropdown, which already
includes `tailscale0` IPs.
- Tailscale's role is strictly network reach — same trust burden as LAN.
Backend cuts:
- `tailscale.py`: `provision_cert`, `ensure_cert`, `cert_needs_renewal`,
`_FQDN_RE`, `_HTTPS_DISABLED_RE`, `TS_CERT_EXPIRY_THRESHOLD_DAYS`,
`cryptography` import. Keep `get_status` and `TailscaleStatus`.
- `certificate.py`: `ts_cert_path`, `ts_key_path`, `use_tailscale_cert`.
- `manager.py`: `tailscale_fqdn` field, `_cert_renewal_task`,
`_cert_restart_task`, `_cert_renewal_loop`, `_restart_for_cert_renewal`,
`_cancel_renewal_task`, `_cancel_restart_task`. Simplify
`_resolve_cert_and_advertise` to a sync method that just generates the
self-signed cert. Drop `tailscale_disabled` from the change-detection
diff (toggle is informational — no service restart needed).
- `routes/virtual_printers.py` + `routes/settings.py`: drop the
`tailscale_not_available` 409 guard on toggle-enable.
Frontend cuts:
- `VirtualPrinterCard.tsx`: FQDN/IP display sourced from
`multiVirtualPrinterApi.getTailscaleStatus()` (host-level) when toggle
is ON, instead of `printer.status.tailscale_fqdn` (cert side-effect,
no longer populated). Drop the `tailscale_not_available` toast handler.
- `api/client.ts`: drop `tailscale_fqdn` from the VP status type.
- i18n: rewrite `tailscaleDisabled.description` in all 8 locales to drop
the "no cert import" promise. Remove `toast.tailscaleNotAvailable` key.
Docs:
- Wiki `features/virtual-printer.md`: rewrite the entire Tailscale section
— remove the LE-cert + HTTPS-Certs-toggle + tailscale-cert-operator
steps, document the toggle as informational, keep the Docker socket
mount + LXC TUN troubleshooting (those still apply for daemon
reachability).
- README: drop "the Tailscale benefit here is the tunnel, not cert-import
elimination" framing in favour of "surfaces the IP for paste into
slicer; CA import unchanged because BBL CA store, not system trust
store, is what gets validated".
Tests:
- `test_tailscale.py`: reduced to surviving `get_status` cases (binary
missing, command fails, success, empty DNSName, malformed JSON).
- `test_virtual_printer.py::test_sync_from_db_restarts_on_tailscale_disabled_change`
→ `test_sync_from_db_does_not_restart_on_tailscale_toggle` (toggle is
informational; `remove_instance` must NOT be called).
- `test_virtual_printer_api.py::TestVirtualPrinterTailscaleGuardAPI` →
`TestVirtualPrinterTailscaleToggleAPI` (single test asserts both
directions succeed and daemon is never consulted).
- `VirtualPrinterCard.test.tsx`: mock now stubs `getTailscaleStatus`;
FQDN-copy block drives data through that query.
DB column `tailscale_disabled` is kept (persists toggle state) — Postgres-
safe column drop is harder; future cleanup can remove if the toggle goes
away entirely. LE cert files on disk (`virtual_printer_ts.{crt,key}`) are
left in place per VP — harmless residue, manual cleanup if desired.
Verified: ruff clean, 2484 backend unit tests pass, 17 frontend VP-card
tests pass, frontend build succeeds, live service restart confirms VPs
serve `issuer=CN=Virtual Printer CA` on the Tailscale interface — slicer
trusts the user-imported bambuddy CA and skips hostname checks, so MQTT
connection succeeds end-to-end.
Edward's diagnosis was exact: the manual /print-queue/ POST extracts
filament requirements from the 3MF and writes
required_filament_types + filament_overrides + ams_mapping onto the
queue item, but the VP queue-mode write path skipped all of that.
Net effect: scheduler reached its model-only-matching fallback and
auto-dispatched onto whatever printer was free regardless of loaded
colour.
Extract the scheduler's existing _get_filament_requirements 3MF
parser into a shared helper so the VP path can reuse it. VP's
_add_to_print_queue now populates required_filament_types
unconditionally (cheap; helps the scheduler reject obvious type
mismatches) and writes filament_overrides with force_color_match:
true per consumed slot when a new per-VP queue_force_color_match
toggle is on. Default off to preserve current behaviour for
upgraders.
UI: new toggle on VirtualPrinterCard, mode-gated to print_queue,
mirroring the existing auto-dispatch toggle. i18n: en + de
translated, other 6 locales seeded with English copy.
Schema: one nullable column on virtual_printers
(queue_force_color_match BOOLEAN, default 0/FALSE).
11 new backend tests (8 for the extracted parser, 3 for the VP
write path) + 6 new frontend tests (toggle render gating, default
state, click posts queue_force_color_match in update body).
Existing scheduler tests pass against the refactored helper.
README, CHANGELOG, website features page, and wiki virtual-printer
page all updated.
X1C and X1 virtual printers used legacy SSDP model codes
(3DPrinter-X1-Carbon, 3DPrinter-X1) that BambuStudio doesn't
recognize, causing "incompatible printer preset" errors when
sending prints. Changed to the correct codes (BL-P001, BL-P002)
that real printers report via SSDP.
Also fixed proxy mode auto-inherit storing printer display names
(e.g. "X1C") instead of SSDP codes, by adding a resolution layer
that maps display names to model codes.
DB migration auto-converts existing VPs on startup.
When creating a virtual printer in proxy mode, the model was always set
to X1C because the frontend hides the model dropdown and the backend
used a hardcoded default. Now auto-inherits the model from the target
printer in proxy mode — on create, on target printer change, and on
mode switch to proxy.
Virtual printers in Queue mode now have an "Auto-dispatch" setting.
When enabled (default), prints start automatically — preserving current
behavior. When disabled, prints are added with manual_start so they
wait for manual dispatch from the queue UI.
maziggy