Subprocess output and user-supplied URLs are scrubbed of credentials
before they reach the application log. Adds a shared redaction helper in
core/logging_filters and routes the existing support-bundle sanitizer
through the same pattern.
Timelapse was on, the video never reached the archive, and Scan for Timelapse
found nothing afterwards. Across 247 support bundles this was the norm, not an
edge case: 457 automatic scans scheduled, 262 attached.
The scan looked four times over ~65s. The attempt that found the video was #1
272 times, then 17 / 13 / 13 — flat against the cutoff, not decaying, i.e.
files were still arriving when we stopped. What ran afterwards searched for the
print name inside the filename; Bambu only writes "video_<timestamp>", so it
fired 159 times and matched zero.
The manual Scan had no baseline at all and matched on filename timestamp, FTP
mtime, or "there is only one video" — all reading a clock a LAN-only printer
cannot sync. The reporter's P1S was six and a half days out.
- Poll for minutes instead of ~65s; drop the name-match fallback.
- Persist the print-start baseline on the archive, so the diff survives a
restart mid-print and the manual Scan runs the same comparison. With a
baseline present the clock-based strategies are skipped entirely — they can
only turn an honest "pick one" into a confident wrong answer.
- When several files are new (a previous print's video landing late), exclude
the ones already attached to another archive instead of ordering the
candidates. Ordering could only be done on the printer's clock.
- Delete the video from the printer once archived. Keeps /timelapse to
unclaimed files, which is what makes the diff unambiguous, and stops P1S
cards filling with AVIs.
- Gate that delete on a verified transfer: download_file now compares against
the size from the listing. An FTPS connection closing early does not always
raise, so a partial buffer was being attached as a complete video — which
would also have been the one case where deleting the source lost data.
Bounded twice on purpose: wall-clock deadline plus a derived round cap, since
the deadline stops bounding the loop as soon as the sleeps are shortened.
Per-round logging only speaks when the listing changed — 31 rounds of full
listings would bury the interesting line in the support bundle.
Migration adds print_archives.timelapse_baseline as JSON, spelled the same on
both dialects so a migrated database matches a fresh one.
-----------
fix(finish-photo): add the timelapse frame to the archive after the notification (#2704)
When a print records a timelapse, its last frame is the better finish photo:
the firmware stops recording with the toolhead parked and before the end
G-code drops the bed, where a live grab at that moment catches a lowered
plate. Bambuddy waited 60s for the video and then gave up, because the
print-complete notification blocks on that photo and holding a notification
for minutes is worse than sending it with the live grab.
P1-series printers write MJPEG AVI rather than H.264 MP4 and serve it slowly.
Measured over 261 attaches in the support bundles: P1S median 33s, p90 167s,
worst 546s, while every other model finished inside 26s. So the printers that
most needed the better framing were the ones that never got it.
Keep the notification on the same bound, and keep waiting off to the side.
_capture_finish_photo_from_timelapse now reports whether it ran out of time or
concluded — a video that landed and failed extraction is not worth retrying,
one that never arrived is. On the first, schedule a background task that waits
up to 15 minutes and inserts the extracted frame at the front of the archive's
photo list, where the gallery opens.
The live grab stays on disk: the notification already links to that exact
file, so removing it would leave a broken image in Discord or Telegram.
The length check proves we received what the listing said, not that the file
was finished. The first look happens ~5s after the print ends, while the
printer may still be writing, so a growing file can be listed short, served
short, and pass. Re-list after the download and only accept the video once its
size has stopped changing — a failed re-list counts as not settled, since
"could not check" must not mean "safe to delete".
A printer with a wrong access code gave no explanation anywhere. The connect
callback's failure branch was a bare `state.connected = False`, discarding the
CONNACK reason code the printer had just sent, so the only trace was paho's
follow-up disconnect -- logged every 30 seconds as "rc=Unspecified error",
which is exactly what a powered-off printer produces. In the report behind this
fix one of three printers had been in that loop for the whole capture, and
neither the log nor the support bundle could say why.
Bambu speaks MQTT 3.1.1, whose CONNACK return codes 4 and 5 paho maps onto
reason codes 134 and 135. Both are now logged with the printer's own reason
string and, for those two, the remedy: the access code is regenerated whenever
LAN Only or Developer Mode is toggled, so it has to be re-read from the screen.
The access code itself is never logged -- it would land in every bundle.
The reason is kept on the client as a stable slug and plumbed through
test_connection into the connection diagnostic, which now distinguishes two
cases it previously conflated. "The printer refused our credentials" is
asserted only when the printer said so; when all Bambuddy knows is that there
is no session, the text hedges and names the alternatives (rebooting, or
already at its limit of simultaneous connections). The old wording claimed the
access code was most likely wrong in both cases.
Frontend needed no change -- ConnectionDiagnostic already renders
`<status>_<reason>` variants with fallback to the plain per-status text, so an
unrecognised slug degrades to today's wording rather than a missing key.
Subprocess output and user-supplied URLs are scrubbed of credentials
before they reach the application log. Adds a shared redaction helper in
core/logging_filters and routes the existing support-bundle sanitizer
through the same pattern.
Timelapse was on, the video never reached the archive, and Scan for Timelapse
found nothing afterwards. Across 247 support bundles this was the norm, not an
edge case: 457 automatic scans scheduled, 262 attached.
The scan looked four times over ~65s. The attempt that found the video was #1
272 times, then 17 / 13 / 13 — flat against the cutoff, not decaying, i.e.
files were still arriving when we stopped. What ran afterwards searched for the
print name inside the filename; Bambu only writes "video_<timestamp>", so it
fired 159 times and matched zero.
The manual Scan had no baseline at all and matched on filename timestamp, FTP
mtime, or "there is only one video" — all reading a clock a LAN-only printer
cannot sync. The reporter's P1S was six and a half days out.
- Poll for minutes instead of ~65s; drop the name-match fallback.
- Persist the print-start baseline on the archive, so the diff survives a
restart mid-print and the manual Scan runs the same comparison. With a
baseline present the clock-based strategies are skipped entirely — they can
only turn an honest "pick one" into a confident wrong answer.
- When several files are new (a previous print's video landing late), exclude
the ones already attached to another archive instead of ordering the
candidates. Ordering could only be done on the printer's clock.
- Delete the video from the printer once archived. Keeps /timelapse to
unclaimed files, which is what makes the diff unambiguous, and stops P1S
cards filling with AVIs.
- Gate that delete on a verified transfer: download_file now compares against
the size from the listing. An FTPS connection closing early does not always
raise, so a partial buffer was being attached as a complete video — which
would also have been the one case where deleting the source lost data.
Bounded twice on purpose: wall-clock deadline plus a derived round cap, since
the deadline stops bounding the loop as soon as the sleeps are shortened.
Per-round logging only speaks when the listing changed — 31 rounds of full
listings would bury the interesting line in the support bundle.
Migration adds print_archives.timelapse_baseline as JSON, spelled the same on
both dialects so a migrated database matches a fresh one.
-----------
fix(finish-photo): add the timelapse frame to the archive after the notification (#2704)
When a print records a timelapse, its last frame is the better finish photo:
the firmware stops recording with the toolhead parked and before the end
G-code drops the bed, where a live grab at that moment catches a lowered
plate. Bambuddy waited 60s for the video and then gave up, because the
print-complete notification blocks on that photo and holding a notification
for minutes is worse than sending it with the live grab.
P1-series printers write MJPEG AVI rather than H.264 MP4 and serve it slowly.
Measured over 261 attaches in the support bundles: P1S median 33s, p90 167s,
worst 546s, while every other model finished inside 26s. So the printers that
most needed the better framing were the ones that never got it.
Keep the notification on the same bound, and keep waiting off to the side.
_capture_finish_photo_from_timelapse now reports whether it ran out of time or
concluded — a video that landed and failed extraction is not worth retrying,
one that never arrived is. On the first, schedule a background task that waits
up to 15 minutes and inserts the extracted frame at the front of the archive's
photo list, where the gallery opens.
The live grab stays on disk: the notification already links to that exact
file, so removing it would leave a broken image in Discord or Telegram.
The length check proves we received what the listing said, not that the file
was finished. The first look happens ~5s after the print ends, while the
printer may still be writing, so a growing file can be listed short, served
short, and pass. Re-list after the download and only accept the video once its
size has stopped changing — a failed re-list counts as not settled, since
"could not check" must not mean "safe to delete".
When a print reaches a terminal state Bambuddy holds the queue until
someone confirms the build plate is clear. That gate was visible only in
the Web UI: the printer's own MQTT push reports nothing beyond RUNNING,
PAUSE, FAILED, FINISH and IDLE, so an external automation could not tell
"finished" from "finished and still waiting for a human".
The per-printer status topic now carries an awaiting_plate_clear field,
and every transition is additionally published on a new retained topic,
bambuddy/printers/{serial}/plate_clear. Retained, and published from the
flag itself rather than from printer telemetry: a subscriber learns the
state of every printer the moment it connects, and the state stays
correct after Auto Off powers a printer down - telemetry stops there,
which would otherwise leave the status topic frozen at false.
Publishing is edge-triggered. The queue clears the gate on every
dispatch whether or not it was up, and no subscriber should see a
"plate cleared" for a plate that was never dirty. Persistence and the
WebSocket broadcast stay unconditional; they are idempotent and predate
this.
A matching Plate Clear Required notification event was added, off by
default on every provider because it fires after every print at the
same moment as the print-complete alert. Only the rising edge notifies.
Acknowledging still goes through POST /printers/{id}/clear-plate.
Two tests in test_printer_manager_status_broadcast.py asserted
_schedule_async.call_count == 2 for the setter. The new emission makes
it three on a transition, so they now assert that the persist and
broadcast coroutines are actually scheduled - which is the contract
Translated in all locales; wiki updated. Covered by backend and
frontend tests.
Projects made of many distinct files that each need N prints (e.g. 13
plates x 10 sets = 130 prints) only had aggregate progress. Finding out
"how many times have I printed plate_7?" meant reading the Activity
Timeline line by line, unusable at 130 events.
Projects now take an optional Copies per File target. Every printable
file in the project's linked folders shows an X / N badge with a mini
progress bar (gray not started, amber in progress, green done), and the
progress card gains a Complete Sets bar - the minimum per-file count,
i.e. how many finished assemblies can be shipped right now. Without the
target, printable files show a plain printed-count badge.
Counting matches the aggregate project stats: completed runs only,
served by a new /projects/{id}/file-progress endpoint. Runs attribute
to a file via a new library_file_id stamp on queue-dispatched archives,
falling back to content hash and then filename for historical rows.
Also fixed: files queued from a project-linked File Manager folder now
inherit that project, so their prints count toward project statistics -
previously only prints started from the project page were attributed.
Test-harness fix along the way: the test suite's get_db override never
committed, unlike production get_db, so endpoints relying on the
request-scoped commit silently lost their writes in tests. The override
now mirrors production commit/rollback semantics.
The folder tree's "sort by recent activity" and the file pane's date sort
put external (mapped/NAS) files in a near-random order instead of ls -t's
newest-first. Nothing captured the files' on-disk mtime: the sort keyed off
the DB updated_at/created_at, which for a bulk external scan is the same
scan instant for every row, so a whole block tied and sorted arbitrarily;
only rows Bambuddy had later touched individually looked "partially right."
The tree also bubbled up only immediate child-file activity, so a file added
deep in a subtree never lifted its parent folders.
- Add nullable fs_modified_at to LibraryFile and LibraryFolder (dialect-
branched migration, mirroring the #2615 dispatching_at pattern).
- External scan records each file's and directory's real os.stat().st_mtime
and refreshes it on every re-scan, so a file edited over the mount
re-sorts and existing installs backfill on the next scan.
- list_folders computes each folder's activity as a recursive newest-
descendant roll-up (post-order), so a fresh deep file lifts every ancestor.
- Folder tree sort and the file pane's date sort now use the real mtime,
falling back to created_at for managed uploads with none.
- New toolbar toggle shows/hides each item's last-modified date in the right
pane (grid + list), with strings in all locales.
Store the mtime as naive UTC to match the other timestamp columns so activity
comparisons never mix naive and aware values on either dialect. Covered by
integration tests (mtime capture, re-scan refresh, deep-file recursive bubble,
folder mtime) and a frontend test proving fs_modified_at is preferred over
created_at.
The bed_levelling/flow_cali/nozzle_offset_cali boolean->tristate migration
builds two UPDATE statements with an f-string interpolating the column
name. Bandit flags these as B608 (SQL injection) at medium severity, which
failed the release-gate scan in test_security.sh.
The interpolated _col only ever iterates the hardcoded _tristate_cols tuple,
never user input, and SQL identifiers can't be passed as bound parameters.
Suppress with `# nosec B608` (matching the existing settings.py convention)
plus an inline rationale. No behavior change.
An end-of-print auto-off on a plug that powers a filter fan marked the linked
printer offline and forced its state to "unknown". The mark was unrecoverable:
connected heals on the next MQTT message but state does not (only frames
carrying gcode_state rewrite it, and steady-state push_status frames are
partial), so the printer stayed "unknown" until a manual Force Refresh and the
queue never dispatched to it again.
The offline mark is now an explicit presumption: mark_power_off records the
state it overwrites and _on_message undoes it as soon as the printer sends
another report on its own topic, since inbound traffic proves the power was
never cut. A reconnect discards the saved state, so a genuine power cut is
unaffected. Each plug also gains a controls_printer_power flag (default true,
backfilled) that gates all five power-off paths, and the queue's power-on step
now picks the flagged plug instead of whichever linked plug came first.
Bed levelling, flow calibration, and nozzle-offset calibration were on/off
only, so the sole way to run bed levelling was to force a full level before
every print. Bambu Studio has always offered a third "Auto" state that lets
the printer skip the calibration when it was done recently -- the state most
users actually want. Make these three options tri-state (off/on/auto),
defaulting to auto, and leave vibration/layer-inspect/timelapse as on/off
(Bambu Studio exposes no auto for those).
Wire encoding follows Bambu Studio's source exactly: each option sends a JSON
bool (true only for "on") plus a companion int -- off=0, on=1, auto=2. The
bool fields stay booleans (the #1478 H2S regression); only the companion int
widened from {0,1} to {0,1,2}. #1721's observation that stage 8/39 stays
queued when sending 2 is the auto contract (queued, skipped at runtime if
recent), not a broken "off".
- schemas: TriState = Literal[off/on/auto] with a BeforeValidator coercing
legacy bool / 0-1 / true-false so old clients and un-migrated rows validate
- model + migration: boolean columns -> String; SQLite via column affinity +
data backfill, PostgreSQL via ALTER COLUMN TYPE guarded on information_schema
(verified on both dialects); settings rows normalised true/false -> on/off
- MQTT: start_print takes the tri-state strings and emits the paired bool+int
- Virtual Printer: reconstructs the slicer's auto/on/off from the int companion
(auto_bed_leveling / extrude_cali_flag) in both capture paths
- frontend: CalibrationMode type; off/auto/on segmented controls in the print
dialog, queue bulk-edit, and Settings -> Workflow; calibrationMode_* strings
in all 11 locales
The /overlay/{id} route renders without a login, but everything it draws is
auth-gated: printer status and name (PRINTERS_READ), one setting (SETTINGS_READ),
and the camera stream (a camera-stream token). A signed-in browser rides its JWT
from local storage; OBS is a fresh browser with no session, so the overlay stayed
blank whenever authentication was enabled. Cloudflare/remote access was never the
cause -- an incognito window fails identically.
Give the overlay a self-contained kiosk-token mode, mirroring the Cam Wall:
- New `overlay` long-lived-token scope, kept separate from `camwall`: the overlay
names the printed file on screen, which a Cam Wall token is trusted never to
expose, so folding it in would silently widen every existing wall token.
- New token-authed GET /printers/{id}/overlay-status returning exactly the fields
the overlay draws and nothing else; added to the auth-middleware allowlist so it
reaches its own RequireOverlayTokenIfAuthEnabled gate.
- StreamOverlayPage reads ?token= and, in that mode, authenticates its status and
camera calls with the token and skips the WebSocket (the 2s poll is the feed).
The logged-in path is unchanged.
- Token-mint UI (Settings > API Keys) offers the scope with a ready-made
/overlay/{id}?token= URL copied once on creation.
A queue row stays status='pending' for the whole FTP upload; status only flips
to 'printing' at the end. The edit routes only blocked non-pending rows, so a
PATCH during the upload window was accepted while the in-flight dispatch kept
using its snapshotted printer -- splitting the queue row from the archive /
expected-print / physical command across two printers, and enabling a duplicate
dispatch on restart. The #1853 CAS guards cancellation, not reassignment.
Add a dispatching_at claim, stamped atomically (WHERE status='pending' AND
dispatching_at IS NULL) before any slow I/O and cleared on every exit. While
held, the single-item PATCH returns 409 (re-checked just before the write),
bulk edits skip the row, and the scheduler won't re-select it. Startup
reconciliation clears claims orphaned by a crash mid-dispatch. The row stays
pending throughout, so no status/UI/completion/reconciliation path changes.
New column print_queue.dispatching_at (nullable, dialect-safe DDL). Covered by
scheduler tests (claim exclusivity, non-pending rejection, release-on-exit,
skip-already-claimed, startup stale-clear) and API tests (reassign 409,
printer_id unchanged, bulk skip, unclaimed row still edits).
A single plate dispatched from a multi-plate 3MF could log the entire file's
filament against that one plate. When the AMS tracker measured nothing, a
completed run's PrintLogEntry.filament_used_grams fell back to
PrintArchive.filament_used_grams -- the sum over every plate (correct for the
archive card / project rollup, #1593) -- ignoring the archive's plate_id. So
each printed plate of a 22-plate file logged the full ~12 kg; cost inherited
the same whole-file value.
Forward: when the archive has a plate_id and its 3MF is on disk, the completed-
run fallback uses that plate's own slicer estimate (extract_plate_metadata_from_3mf)
and scales cost by the plate's share of the whole. Tracker-measured runs and
single-plate archives are unchanged.
Backfill: a startup migration repairs rows already written -- completed entries
whose stored grams exactly equal the archive's whole-file value, with a plate_id
and an on-disk 3MF, get recomputed to plate-scoped grams + cost. The exact-match
guard never touches tracker-measured or partial rows; idempotent, data-only,
identical on SQLite and Postgres, and logs the correction.
A print queued from a specific plate of a multi-plate 3MF showed as Plate 1
in Print History after cancellation: the archive derives its plate from the
filename, but a whole multi-plate 3MF uploads under one name with no plate
suffix, so the parser defaulted to plate 1 and nothing copied the queue
item's plate_id onto the archive (which had no plate field).
Add a nullable print_archives.plate_id, copy it from the queue item at
dispatch (archive- and library-file paths), expose it in the archive API,
and render it in Print History. A startup backfill copies the plate onto
existing archives from their linked queue rows. Column add + backfill are
identical on SQLite and Postgres.
Also fix a related lifecycle bug: stopping a printing item while the printer
was offline left the linked archive stuck at "printing" (queue row
cancelled, but no MQTT completion ever arrives to reconcile the archive).
The offline-stop path now closes the archive out directly; the online path
still defers to the MQTT completion event.
Three more idle-in-transaction / thundering-herd paths from farm testing:
- print_scheduler: _start_print commits before the FTP delete/upload and
_preheat_and_soak commits before the heat-soak wait, so the per-item
session no longer sits idle-in-transaction across preheat + upload.
- cloud/filament-info: rollback the request transaction after the token
read and before the sequential Bambu Cloud calls; single-flight
concurrent misses for the same setting_id through one shared call.
- printers/cover: coalesce identical in-flight cover requests so followers
serve from the cache the leader fills instead of duplicating the
multi-path FTP + 3MF extraction.
Also adds pool_use_lifo (PostgreSQL default on, DB_POOL_USE_LIFO override,
shown in /system/db-pool) so a bursty farm keeps a small hot connection set.
Two or three concurrent UI logins exhausted the PostgreSQL pool on the
reporter's 93-printer farm: QueuePool limit of size 10 overflow 20 reached,
with all 30 sessions idle in transaction on the auth_enabled SELECT. Three
regressions had landed on dev after an earlier configurable-pool change was
reverted and never re-applied (only the route-by-route session fixes were).
- Pool sizing is env-configurable again (DB_POOL_SIZE / DB_MAX_OVERFLOW /
DB_POOL_TIMEOUT / DB_POOL_RECYCLE); the PostgreSQL default returns to
20 + 80 with pool_pre_ping and pool_recycle=1800, and GET
/api/v1/system/db-pool reports resolved config + live gauges without
checking out a connection. SQLite unchanged (20 + 200).
- is_auth_enabled caches for 30s again. Only enabled=True is ever cached, so
a stale read can only fail closed (require auth), never open; set_auth_enabled
invalidates immediately. An autouse test fixture resets the module cache
between tests to keep ordering deterministic.
- Every authenticated request checked out two pooled connections: the
permission dependency held one and the revoked-jti check opened another.
is_jti_revoked now reuses the caller's session; the token dependencies and
the auth-middleware gateway were restructured to open one session and pass
it in, so each request makes a single checkout.
Large PostgreSQL farms exhausted the fixed pool (pool_size=10 +
max_overflow=20): with ~93 printers every connection sat idle in
transaction and unrelated requests waited out the 30s pool timeout or
failed in the auth middleware.
- Make pool sizing env-configurable (DB_POOL_SIZE / DB_MAX_OVERFLOW /
DB_POOL_TIMEOUT / DB_POOL_RECYCLE); raise the Postgres default to
20 + 80 with pool_pre_ping + pool_recycle=1800.
- Cache the auth_enabled probe (30s) to drop a per-request DB round-trip.
Only enabled=True is cached, so staleness fails closed; set_auth_enabled
invalidates immediately.
- Add GET /api/v1/system/db-pool exposing resolved config + live
checked_out/checked_in/overflow gauges without consuming a connection.
Session-hygiene (connections held across MQTT/FTP/camera/3MF I/O) is a
separate follow-up.
An expired token was indistinguishable from a working one. set_token()
stamped token_expiry = now + 30 days every time a stored token was loaded,
so the expiry reset on every request and is_authenticated could never
return False. /cloud/status answered "connected" for as long as any token
existed, while every cloud call 401'd — and the user was shown Bambu's own
{"error": "Please login."} verbatim.
Bambu is now the authority: /cloud/status validates the token upstream
(cached 5m), and any 401 from any authenticated call durably records the
credential as dead via users.cloud_token_invalid_at, so MakerWorld, cloud
profiles, slicer presets and firmware checks all agree at once. An
unreachable Bambu is treated as unknown, never as expired, so an outage
cannot sign a working session out.
The user-facing message now names the Profiles page, where the Bambu Cloud
sign-in actually lives; the old text pointed at a Settings page that does
not exist. Same stale path corrected in the wiki.
The reporter's 19-printer farm started prints "one by one", up to an hour apart.
check_queue awaited each dispatch inline, and a dispatch includes the FTP upload,
so every printer queued behind every other printer's transfer despite being an
independent machine. His logs give the arithmetic: 40978500 bytes in 254.1s,
157 KB/s - a Bambu printer's SD write, not the network, is the bottleneck. Nineteen
of those in series is ~80 minutes, and the next upload started 131 ms after the
previous one finished. The delay is linear in fleet size, which is why it got worse
the more printers he selected.
Dispatch is now collected during the (still sequential) selection loop and run
concurrently afterwards, capped by queue_max_concurrent_uploads - Settings ->
Workflow -> Queue & Dispatch, default 4, 1 restores the old behaviour. Every gate
is untouched; only the transfers overlap. The pass still awaits its uploads before
returning: _start_print flips the row pending -> printing only after the upload,
so an early return would let the next tick re-dispatch the same rows.
FTP work moves to its own thread pool. It was on asyncio's default executor -
min(32, cpu+4), six threads on a 2-core NAS, shared with everything else - which
was survivable only while uploads were serial.
Two problems the same bundle exposed:
A printer that accepts project_file but never starts (#1678) was retried forever:
270s watchdog, revert to pending, re-upload the whole file, repeat. Hence his
"printer who, since the morning, still not launch" - and on a farm each lap also
eats an upload slot the other printers are waiting on. Attempts are now counted on
the queue item; after three it fails with a message pointing at the printer instead
of queueing a fourth re-upload.
The debug bundle we asked him for held 4m49s of history. The push_status dumps fired
on every frame rather than on change - several while their own comment claimed
otherwise - which is 27,727 of the bundle's 29,830 lines and rolls 5 MB in under five
minutes on 19 printers. They now log transitions only. The bundle also read just the
live log while three rotated backups sat next to it, under a byte budget four times
larger than the file it was reading.
Migration verified on SQLite and Postgres: idempotent, backfills legacy NULLs
(dispatch_attempts + 1 is NULL for a NULL row, which would silently disable the cap).
Tests: 6 on concurrent dispatch (overlap, cap honoured, 1 == serial, default applies
with no settings row, a failed printer does not cancel its siblings, no early return),
4 on the retry budget, 6 on the bundle's rotated-log span, 7 on the debug gating.
Each verified to fail against the unfixed code - the first end-to-end log assertion I
wrote passed without the fix and had to be tightened.
Queueing several plates of one 3MF built a single filament-override list from
every selected plate and posted that same list with each plate's item. A
force_color_match entry blocks dispatch until the printer has that exact colour
loaded, so a single-colour plate waited on the whole batch's palette. The same
shared list also widened required_filament_types, making a PLA plate refuse
every printer that lacked a sibling plate's PETG.
Narrow the overrides to the slots the plate actually consumes, on create and on
update -- in the backend, where the 3MF is, so it holds for every writer of the
queue. Dispatch already re-parsed requirements per plate and keyed overrides by
slot, so the dropped entries were inert there. When the plate's slots cannot be
read the overrides are kept whole: an item waiting on a colour it does not need
is visible, one that silently lost a forced colour prints in the wrong filament.
Items queued before this would stay stuck with a waiting reason that explains
nothing, so a startup migration re-scopes the pending ones. Printing and
finished items keep their overrides -- that is a record of what they dispatched
with, not an instruction.
A Shelly reports one energy figure — aenergy.total, a lifetime counter in Wh
that never resets. Bambuddy had a single REST energy field and filed whatever
it found under "today", so the value never reset at midnight, and Yesterday
and Total stayed at zero: get_energy() simply never set those keys.
With `total` unpopulated, the hourly snapshot recorder skipped the plug, so
the Statistics page's energy figure was zero as well, not just the Settings
card.
Split the REST energy config in two: rest_energy_path still means "used
today", rest_energy_total_path means "lifetime counter". A Shelly has only
the latter; a Tasmota behind a REST bridge has both; sharing a URL costs one
fetch, not two.
Then derive Today and Yesterday from that counter using the snapshots we were
already taking: today = counter now - counter at the last local midnight;
yesterday = the gap between the two previous midnights. Local midnight, not
UTC — a UTC boundary rolls Today over at 02:00 in Berlin. The snapshot loop
now ticks on the local hour so a reading lands on the boundary instead of up
to an hour early. A counter that goes backwards (factory reset) reports
nothing rather than a negative.
Collateral, found while verifying on both engines: the smart-plug DateTime
columns are naive UTC but the code wrote aware datetimes into them. SQLite
drops the offset; asyncpg raises DataError. So on Postgres every snapshot
capture raised inside the loop's except, and every status poll raised on
last_checked — the whole subsystem was dead on the database we recommend for
multi-printer installs. All plug timestamps are naive UTC now.
Existing REST users with a cumulative path in the today field must move it to
the new lifetime field; the form and wiki now name which counter each wants.
Cam Wall had no URL — the only way in was the toggle on the Printers page,
so it could not be bookmarked, linked, or shown on a wall-mounted screen.
Add a standalone /camwall route. Signed in, it is the wall as it was. For a
TV or Pi with no login, it authenticates with a long-lived token in the URL.
A kiosk needs the printer list and per-printer status, both of which sit
behind PRINTERS_READ. Rather than widen camera_stream to cover GET /printers
— whose response carries serial_number and ip_address, which have no business
on a screen in a shared room — add a read-only feed at
GET /api/v1/camwall/printers that serves only what a tile draws, and gate it
on a new camwall token scope. The print filename is not served at all: a token
wall renders the compact overlay, so the part on the bed is never named.
The scope is separate rather than a widening: camera_stream tokens are already
in the wild, minted to hand out video, and must not gain the ability to
enumerate a fleet by name. camera_stream is refused by the feed; camwall
passes the stream gate so its own tiles fill.
Kiosk walls drop the settings popover and click-through entirely (not merely
hidden — a passive screen must carry no focusable control it cannot act on),
cap the overlay at compact, and poll rather than open a WebSocket. maxLive,
interval and status can be set from the URL, clamped to the popover's ranges.
PROJECTS_CREATE/UPDATE/DELETE were in _APIKEY_DENIED_PERMISSIONS with no
entry in _APIKEY_SCOPE_BY_PERMISSION, so every project mutation returned a
generic 403 for any API key regardless of granted permissions -- the same
regression class as archives (#1888) and library (#1832).
Add a per-key can_manage_projects scope. Project routes gate on plain
PROJECTS_* (no OWN/ALL split), so all three CRUD permissions map to the one
scope; membership edits (add-archives) gate on PROJECTS_UPDATE and are
covered. PROJECTS_READ is unchanged (already under can_read_status).
Column defaults TRUE for new keys; existing rows backfill to FALSE so the
upgrade never silently widens scope. Migration is BOOLEAN (SQLite + Postgres
safe), verified on fresh SQLite and Postgres 17. Bundled SpoolBuddy kiosk key
set to False. Settings API-key UI gets a Manage Projects toggle + Projects
badge; 11-locale i18n. RBAC scope matrix + drift guards extended.
DELETE /api/v1/archives/{id} rejected every API key with 403
"API keys cannot be used for administrative operations", regardless of
the print's owner or the key's scopes. ARCHIVES_DELETE_ALL/_OWN (and the
create/update variants) were on the denylist and absent from the scope
allowlist, so require_ownership_permission fell through to the generic
admin-denied 403 — the whole archive-management surface was unreachable
for API keys. Same regression class as the #1832 library/maintenance
carve-outs.
Add a can_manage_archives per-key scope: ARCHIVES_CREATE, ARCHIVES_
UPDATE_OWN/_ALL and ARCHIVES_DELETE_OWN/_ALL move from the denylist to
the allowlist under it (OWN and ALL fold into the same scope, matching
can_manage_library). ARCHIVES_PURGE stays admin-only — it drops the
print's Quick Stats contribution, mirroring LIBRARY_PURGE. Column
defaults TRUE for UI-created keys; existing rows backfill to FALSE so the
upgrade never silently widens scope. Bundled SpoolBuddy kiosk key stays
minimally scoped (False). Migration is dialect-agnostic and verified on
fresh SQLite and Postgres 17.
Adds the Settings API-key toggle + badge (11-locale i18n) and extends the
RBAC scope matrix to cover all five archive-management permissions.
Carve MAINTENANCE_CREATE/UPDATE/DELETE out of the admin denylist so
HA automations can log "cleaned nozzle" / reset a counter via API key
without granting broader printer control. Follows the same shape as
can_manage_library and can_manage_inventory: new column, allowlist
entry, UI checkbox, wiki row, RBAC test coverage.
Distinct backfill: these perms were EXPLICITLY denied for every API
key before this change (no existing integration relies on them), so
existing rows migrate to FALSE — no silent scope widening on upgrade.
New keys default to TRUE, matching the safe-on-by-default pattern.
Bundled SpoolBuddy kiosk key gets False explicitly (kiosk doesn't need it).
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
Administrators system group sync
- Fresh installs already bootstrap with ALL_PERMISSIONS, so they always have
every permission. Upgrades previously only got what one-off backfill blocks
in seed_default_groups() explicitly listed (library:purge, archives:purge,
the OWN/ALL read-flag block, orca_cloud:auth, pipelines:*). Any Permission
enum member added without a matching block silently stayed missing on
existing admin rows. The most recent gap was printer_sensor_history:read
(Sensor History charts returned 403 for upgraded admins).
- seed_default_groups() now syncs Administrators to ALL_PERMISSIONS on every
startup: append every Permission value that isn't already on the row.
Additive only -- hand-added custom permissions are preserved.
- The pure-admin one-off backfills (library:purge / archives:purge block,
the OWN/ALL + orca_cloud:auth + legacy-read-flag block, the Administrators
branch of the pipeline backfill) are retired since the sync subsumes
them. Non-admin backfills (Operators / Viewers OWN-tier reads, Operators
orca_cloud:auth, pipelines for non-admin groups, makerworld:*, clear_plate
cross-group adders) are untouched.
- Tests: test_administrators_printer_sensor_history_read_backfilled
(regression for the reported gap),
test_administrators_sync_covers_every_current_permission (generic
invariant -- any future new permission lands on admin without needing
a one-off test), test_administrators_sync_is_additive_only (custom
permissions preserved). 12/12 backfill-migration + 102/102 broader
permission tests green; ruff clean.
Pipelines runs dashboard
- PipelineRunsPage.tsx: the Pipeline / Status / Target filter row's three
native <select> elements are replaced with a bambu-themed FilterDropdown
(button trigger, floating menu, optgroup-style headers for the Target
picker, hover + selected states with a check mark, closes on outside
click and Escape). Same value/onChange contract -- visual only.
- SlicerPipelinesPanel.tsx: wrap list?.pipelines ?? [] in useMemo so the
reference is stable when the data is stable. Fixes the
react-hooks/exhaustive-deps warning where the inline fallback returned
a fresh empty array every render, invalidating both downstream useMemo
caches (target-options + filtered-pipelines list).
PROJECTS_CREATE/UPDATE/DELETE were in _APIKEY_DENIED_PERMISSIONS with no
entry in _APIKEY_SCOPE_BY_PERMISSION, so every project mutation returned a
generic 403 for any API key regardless of granted permissions -- the same
regression class as archives (#1888) and library (#1832).
Add a per-key can_manage_projects scope. Project routes gate on plain
PROJECTS_* (no OWN/ALL split), so all three CRUD permissions map to the one
scope; membership edits (add-archives) gate on PROJECTS_UPDATE and are
covered. PROJECTS_READ is unchanged (already under can_read_status).
Column defaults TRUE for new keys; existing rows backfill to FALSE so the
upgrade never silently widens scope. Migration is BOOLEAN (SQLite + Postgres
safe), verified on fresh SQLite and Postgres 17. Bundled SpoolBuddy kiosk key
set to False. Settings API-key UI gets a Manage Projects toggle + Projects
badge; 11-locale i18n. RBAC scope matrix + drift guards extended.
DELETE /api/v1/archives/{id} rejected every API key with 403
"API keys cannot be used for administrative operations", regardless of
the print's owner or the key's scopes. ARCHIVES_DELETE_ALL/_OWN (and the
create/update variants) were on the denylist and absent from the scope
allowlist, so require_ownership_permission fell through to the generic
admin-denied 403 — the whole archive-management surface was unreachable
for API keys. Same regression class as the #1832 library/maintenance
carve-outs.
Add a can_manage_archives per-key scope: ARCHIVES_CREATE, ARCHIVES_
UPDATE_OWN/_ALL and ARCHIVES_DELETE_OWN/_ALL move from the denylist to
the allowlist under it (OWN and ALL fold into the same scope, matching
can_manage_library). ARCHIVES_PURGE stays admin-only — it drops the
print's Quick Stats contribution, mirroring LIBRARY_PURGE. Column
defaults TRUE for UI-created keys; existing rows backfill to FALSE so the
upgrade never silently widens scope. Bundled SpoolBuddy kiosk key stays
minimally scoped (False). Migration is dialect-agnostic and verified on
fresh SQLite and Postgres 17.
Adds the Settings API-key toggle + badge (11-locale i18n) and extends the
RBAC scope matrix to cover all five archive-management permissions.
Carve MAINTENANCE_CREATE/UPDATE/DELETE out of the admin denylist so
HA automations can log "cleaned nozzle" / reset a counter via API key
without granting broader printer control. Follows the same shape as
can_manage_library and can_manage_inventory: new column, allowlist
entry, UI checkbox, wiki row, RBAC test coverage.
Distinct backfill: these perms were EXPLICITLY denied for every API
key before this change (no existing integration relies on them), so
existing rows migrate to FALSE — no silent scope widening on upgrade.
New keys default to TRUE, matching the safe-on-by-default pattern.
Bundled SpoolBuddy kiosk key gets False explicitly (kiosk doesn't need it).
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
require_ownership_permission gates API keys on `all_perm` only — the
comment at auth.py:1659 says OWN and ALL "both map to the same scope
flag" for queue / archives / etc., so checking `all_perm` is the
correct gate. Library deliberately broke that: LIBRARY_UPDATE_OWN /
LIBRARY_DELETE_OWN mapped to can_manage_library, but the ALL variants
were in _APIKEY_DENIED_PERMISSIONS. Result — every API-key request to
DELETE /library/files/{id}, PUT /library/files/{id} (rename), or
POST /library/files/move hit "administrative operations" 403, even
for keys with can_manage_library=True. Only slice worked, because it
doesn't go through require_ownership_permission.
The "ALL stays admin-only because it crosses the user boundary"
intent was internally inconsistent. API keys have no per-row
ownership identity (user=None), so the route's
`file.created_by_id != user.id` ownership check would AttributeError
on a key acting under OWN anyway — the only working path is
can_modify_all=True, which `all_perm` denial blocked outright.
Fix folds LIBRARY_UPDATE_ALL and LIBRARY_DELETE_ALL into
_APIKEY_SCOPE_BY_PERMISSION under can_manage_library, matching the
can_queue precedent (QUEUE_UPDATE_OWN and QUEUE_UPDATE_ALL both
map to can_queue for the same per-key-identity reason). Both removed
from _APIKEY_DENIED_PERMISSIONS. LIBRARY_PURGE stays denied — it
bypasses the soft-delete window and is genuinely destructive.
On dual-nozzle printers (H2C/H2D), the External card stacked a
separate "Ext-L" / "Ext-R" caption below each tray to mark which
extruder it fed. That caption appeared on the External card only,
making the bottom row of the printer card's AMS panel visibly
taller than the row above it.
Fix: the L/R distinction now lives inside the slot's colour circle
in place of the numeric index, and the bottom caption is removed.
FilamentSlotCircle's slotNumber prop is widened to `number | string`
to carry the letter. Single-nozzle externals (one tray, no L/R
distinction) keep the numeric "1".
The Ext-L / Ext-R strings still drive the slot's "location" label
in the filament hover card, so detail context is preserved.
Adds a global local_login_enabled setting plus a per-provider
is_autologin flag on OIDCProvider so operators who run their own SSO
enabled, or if the calling admin has no UserOIDCLink — either would
lock everyone out. App-layer invariant: at most one provider can carry
is_autologin; setting it on one clears it on every other.
/auth/advanced-auth/status surfaces both new fields so the LoginPage
decides UI in one query. The env-var bypass flips the reported
local_login_enabled back to true so the SPA matches what the route
will accept.
fix(db): order filament_shopping_list color_name ALTER after CREATE
PR #1814 added ALTER TABLE filament_shopping_list ADD COLUMN color_name
before the CREATE TABLE IF NOT EXISTS for that table. On fresh installs
the ALTER hit "no such table" — not in _safe_execute's swallow list —
and aborted run_migrations, breaking every migration test that starts
from a fresh DB. Moved the ALTER to after the CREATE on both SQLite and
Postgres branches; the CREATE already declares color_name, so this is
purely the upgrade path and "duplicate column name" on re-runs is
swallowed.
Reprints triggered a bogus "Print Stopped" push notification while the print
kept running, surfaced by the reconciler synthesising a missed PRINT COMPLETE
on MQTT reconnect.
bambu_mqtt:3647 mints a fresh subtask_id per dispatch. On reprint, the
on_print_start expected-archive promotion only wrote subtask_id when the
stored value was empty (`not archive.subtask_id`) — so the archive kept the
FIRST run's id. On the next MQTT reconnect, reconcile_stale_active_prints
(#1542) compared the stale stored id against the printer's live id, found
a mismatch, and synthesised a status="aborted" PRINT COMPLETE — which fires
the "Print Stopped" notification.
Captured cleanly in the reporter's support bundle:
[RECONCILE] Printer 1: synthesising missed PRINT COMPLETE for archive 31
— subtask_id changed ('1844213296' → '2103771517')
immediately followed by gcode_state: RUNNING on the same wire.
Fix: update archive.subtask_id whenever the new effective id differs from
the stored one, not only when the stored one is empty. Inequality check
preserves the noop-on-stable-push behaviour the original guard provided.
Two places in main.py (expected-print and duplicate-printing-archive
branches). 3 new unit tests cover the reprint, first-run, and stable-push
paths. Reconciler itself unchanged — it was doing the right thing given
the data it had.
Single failure on a printer with require_previous_success queue items
permanently skipped every downstream + every new item — the
_check_previous_success lookback always walked back to the original
failed row (skipped is excluded from the lookback), and no code path
could dismiss that failure.
Three pieces:
1. PrintQueueItem.gate_acknowledged Boolean column (default False).
SQLite/Postgres-safe ALTER, dialect-branched DEFAULT.
2. _check_previous_success skips rows where gate_acknowledged=True so
acknowledged failures walk past the lookback. Fresh post-resume
failures still gate independently.
3. POST /api/v1/queue/printer/{printer_id}/resume — gated on
QUEUE_UPDATE_ALL — acknowledges failed/aborted items for that
printer AND restores items where
status='skipped' AND error_message='Previous print failed or was
aborted' back to pending in one transaction. Returns
{acknowledged, restored}.
Frontend banner above the active Queue tab surfaces blocked printers,
fires a warning-variant ConfirmModal, and shows a precise toast on
success.
When the printer reports ams_filament_backup=True,
compute_deficit_for_queue_item pools remaining_grams across spools
matching (preset, colour) on the same printer (scoped per extruder on
dual-nozzle) before declaring a per-slot shortfall. Identity is strict:
same slicer_filament preset AND same colour (alpha-normalised). Two
PETG HF spools in different colours are NOT pooled — the firmware would
swap correctly but the print would change colour mid-run. Spoolman side
mirrors the rule via filament.id + color_hex. Backup OFF falls back to
the pre-PR per-slot accounting line-for-line.
8 new test cases in TestFilamentDeficitBackupAware pin pool covers,
pool insufficient, different presets, backup-OFF regression, dual-
extruder side scoping, no-preset never pairs, colour-strict, and
alpha-hex normalisation. The 8 pre-existing test_filament_deficit.py
cases stay green.
feat(printers): AMS Filament Backup modal with BS-style ring per pair
Badge click on the Filaments section header (#1766) now opens a
modal: filament-colour ring per backup pair, material name + rotation
count in the centre, slot labels distributed around the colour band on
contrast-aware pills. Closely modelled on Bambu Studio's Auto Refill
widget. Lone slots are intentionally not listed. R / L badges per ring
when the extruder map carries two distinct values; collapses to no-
badge rendering for single-nozzle printers misflagged as dual.
Esc keypress closes the modal. Theme-aware via CSS variables matching
AMSHistoryModal. computeBackupGroups helper in utils/amsHelpers
defensively dedupes duplicate ams.id entries observed on switch-VP
aggregations.
10 modal render cases pin: Esc closes / unmount nulls the listener /
ring renders for pairs and omits lone slots / R-L badges only when
extruder map has distinct values / empty state / toggle gating.
13 frontend cases pin computeBackupGroups identity rules.
feat(printers): active-print P-N pill on AMS slot tiles during RUNNING
While the printer is mid-print, each AMS slot tile referenced by
status.ams_mapping carries a small "P1 / P2 / P3" pill in the top-
right corner, naming which print-slot is mapped to that AMS slot.
Catches the #1762 comment-2 scenario: a queue job set for "any X1C"
staged to a printer with mismatched filament, no way to verify mid-
print. Same wire data (status.ams_mapping is already on the wire) —
the addition is purely surface.
The existing ring-bambu-green highlight for effectiveTrayNow keeps its
meaning (currently extruding RIGHT NOW); the pill is the per-slot
static assignment for the active print.
chore(scheduler): log Print Anyway short-circuit at INFO
_block_on_filament_deficit logs at INFO when it honours
item.skip_filament_check, so a future "Print Anyway didn't work" report
(third commenter on #1762 hit this shape) has actionable evidence in
the standard support bundle without DEBUG. Bundled because the deficit
fix makes the original symptom disappear for users with backup ON.
maziggy