H2D firmware reports stg_cur=74 during print preparation, which was
not in the STAGE_NAMES lookup table (sourced from BambuStudio, which
only goes up to 66). This caused "Unknown stage (74)" to display on
the printer card. Also adds stage 77 ("Preparing AMS") which exists
in BambuStudio source but was missing from the lookup.
When scheduling a print to "any printer" (model-based assignment),
users can now override the 3MF's original filament choices per slot.
The override dropdown shows compatible filaments loaded across all
printers of the selected model, filtered by type and nozzle (H2D).
The scheduler matches against overridden type/color instead of the
original 3MF values, preferring printers with exact color matches.
Backend:
- New GET /printers/available-filaments endpoint (aggregates loaded
filaments across printers of a model, includes extruder_id for
dual-nozzle nozzle-aware filtering)
- New filament_overrides JSON column on print_queue table
- Scheduler applies overrides before AMS mapping, clears tray_info_idx
on overridden slots so color matching takes priority
- Printer selection prefers printers with most override color matches
Frontend:
- New FilamentOverride component with per-slot override dropdowns
- Type-filtered options (PLA slots only show PLA)
- Nozzle-aware filtering (H2D: only shows filaments on correct extruder)
- Integrated into PrintModal for model-based queue mode
Tests:
- 11 backend unit tests (color match counting, override application)
- 12 frontend tests (rendering, type/nozzle filtering, interactions)
i18n: All 6 locales (en, de, fr, it, ja, pt-BR)
The MQTT "fun" field is an integer in the JSON payload, but the
parser used int(value, 16) which requires a string. This raised
TypeError on every message, silently swallowed by the except clause,
so developer_mode was never set.
Parse the MQTT "fun" field bit 0x20000000 to detect whether connected
printers have Developer LAN Mode enabled. Show a persistent orange
warning banner when any printer lacks it, since newer firmware silently
rejects MQTT write commands without developer mode.
- Parse fun field into developer_mode on PrinterState
- Add /printers/developer-mode-warnings lightweight polling endpoint
- Include developer_mode in printer status API and support bundle
- Orange banner with affected printer names and wiki link
- Translations for all 6 locales (en, de, fr, it, ja, pt-BR)
- 7 backend + 4 frontend tests
P2S firmware sends local slot IDs (0-3) in tray_now, not global tray
IDs, when multiple AMS units are connected. The UI highlighted the
wrong AMS unit (e.g., AMS-A instead of AMS-B). Usage tracking was
unaffected because it uses the MQTT mapping field.
Added disambiguation in _handle_ams_data for single-nozzle printers
with ams_exist_bits indicating >1 AMS: cross-references tray_now with
the MQTT mapping field (snow-encoded) to resolve the correct global
tray ID. Falls back to raw value when no mapping is available or
ambiguous. No behavior change for single-AMS printers or dual-nozzle
(H2D) printers.
Three bugs allowed uploaded gcode files to survive on the printer's SD
card, causing firmware restarts to auto-start old prints hours later.
1. The post-print cleanup retry loop always broke after attempt 1
regardless of delete success — delete_file_async returns False on
failure instead of raising, so the except-based retry never fired.
2. When start_print() failed after uploading, the file was never cleaned
up since on_print_complete never fires for prints that never started.
3. Cleanup failures were logged at DEBUG level, invisible in production.
When a spool runs empty mid-print and the AMS auto-switches to a backup,
the entire print weight was attributed to the original spool. Track tray
changes during the print via tray_change_log on PrinterState, then split
the 3MF weight across trays using per-layer gcode segment boundaries at
print completion. Falls back to linear layer-ratio splitting when gcode
data is unavailable.
ntfy servers with attachments disabled reject thumbnail uploads with
"attachments not allowed" (HTTP 400 / code 40014), causing the entire
notification to fail. Now automatically retries without the image so
the notification still gets delivered.
The log sanitizer only used regex patterns, missing arbitrary user-chosen
strings (printer names, usernames). Tasmota smart plug credentials were
logged verbatim in URLs by httpx.
- Make _sanitize_log_content() database-aware: query Printer names/serials,
User usernames, and Bambu Cloud email for exact-string replacement
(longest-first, skip <3 chars to prevent over-redaction)
- Fix serial regex leaking first 3 chars (remove capture group partial
redaction), add case-insensitive flag
- Move Tasmota credentials from URL-embedded (http://user:pass@host) to
httpx auth= parameter so they never appear in logs
- Add URL credentials regex as defense-in-depth for user:pass@ in logs
- Add 'username' and 'path' to settings sensitive_keys filter (catches
smtp_username, slicer_binary_path in support-info.json)
When sending notifications with image attachments (progress/error
events), the message body was placed in an HTTP Message header. Messages
containing newlines (e.g. "Printer: file.stl\nRemaining: 4h 52m") were
rejected by httpx since HTTP headers cannot contain newline characters.
Escape newlines to literal \n which ntfy renders as line breaks.
MQTT raw data returns AMS unit and tray IDs as strings (e.g. "0"),
but _build_loaded_filaments() compared them to integers without
casting. After the scheduler assigned an idle printer to an "Any
Model" job, it crashed computing AMS mapping with:
'>=' not supported between instances of 'str' and 'int'
The exception prevented the assignment from committing, so the
scheduler retried every 30 seconds in an infinite loop. The job
stayed in "Waiting" and the "Clear Plate" button kept reappearing.
Cast ams_id and tray_id to int(), matching the pattern already used
for external spool IDs on line 550.
When a spool ran empty during a print and the AMS auto-switched to a
backup, on_ams_change eagerly deleted the SpoolAssignment (fingerprint
mismatch). on_print_complete then queried the now-deleted assignment
and silently dropped usage.
Snapshot all spool assignments into PrintSession at print start. At
completion, prefer the snapshot over live DB queries in both the 3MF
primary path and the AMS remain% delta fallback. Fall back to live
query for backward compatibility with in-flight sessions started
before upgrade.
The MQTT callback thread checked self._pending_kprofile_response before
calling .set(), but the asyncio thread could clear it to None between
the check and the use (TOCTOU race after get_kprofiles() timeout).
Capture the event reference in a local variable to eliminate the race.
This allows users sending particularly large prints to slow printers such as the P1-series to start a print and then move onto another task in Bambuddy immediately (such as starting more prints on more printers). It also gives the user visibility into what's happening instead of a loading indicator appearing for an indefinite period of time.
The new toast-based UI uses websockets to update in real time. It will also appear for other users / instances of Bambuddy, not just the user who started the prints, allowing more transparency and handling cases where the user closes the page and then comes back wanting to know the status of the dispatching.
fix: review fixes for background dispatch PR #408
- Restore missing imports in main.py (inventory, print_log, virtual_printers, mqtt_smart_plug_service)
- Guard voidresp() for A1 printers to prevent hang after upload
- Don't fail upload on voidresp() error since data transfer already completed
- Add ams_mapping to register_expected_print calls for Spoolman usage tracking
- Fix cancel_job TOCTOU race by using single lock acquisition
- Fix batch counter reset TOCTOU by re-checking condition inside second lock
- Add backgroundDispatch translations to fr.ts and pt-BR.ts
- Remove dead upload_progress_callback definitions
- Skip redundant "Print queued" toast in reprint mode (dispatch toast handles it)
- 5 backend tests: cancel_job single-lock TOCTOU, batch reset re-check,
job lifecycle
- 2 FTP regression tests: voidresp error handling (upload-loop fix),
A1 model voidresp skip
- 1 frontend test: reprint toast suppression
- CHANGELOG: background dispatch feature + test coverage entries
- README: add background dispatch to Scheduling & Automation
- Website: add feature item to Automation section
- Wiki: add Background Print Dispatch section to print-queue.md
When the snow field hadn't arrived yet, the ams_extruder_map fallback
computed ams_id * 4 + slot for AMS-HT units (128-135), producing
invalid tray IDs like 512+. AMS-HT has a single slot; global ID = unit
ID.
- Single-AMS fallback: return ams_id directly for AMS-HT (128-135)
- Multi-AMS matching: decompose AMS-HT trays correctly (slot=0)
- Multi-AMS narrowing: slot > 0 eliminates AMS-HT candidates
- last_loaded_tray: tighten to valid IDs only (0-15, 128-135, 254)
- Add 10 tests for AMS-HT fallback and last_loaded_tray validation
Multiple Virtual Printers:
- Each VP gets a dedicated bind IP with independent FTP, MQTT, SSDP, and Bind services
- New VirtualPrinter DB model, CRUD API (/api/virtual-printers), React UI
- VirtualPrinterList, VirtualPrinterCard, VirtualPrinterAddDialog components
- Per-instance TLS certificates (shared CA), 11 printer models, all 4 modes
- Auto-incremented serial suffixes, network interface override per VP
Dual Bind/Detect Ports (#445):
- Listen on both ports 3000 and 3002 for slicer bind/detect handshake
- Different BambuStudio/OrcaSlicer versions use different ports
- Applies to BindServer (server mode) and SlicerProxyManager (proxy mode)
- Updated Dockerfile, docker-compose.yml, firewall rules in wiki
Also:
- Rewrote VP test suite for new multi-instance architecture (75 tests)
- Rewritten "How it works" section with 3-step workflow explanation
- Updated all 5 locales (en, de, ja, fr, it)
- Updated wiki and website for multi-VP + dual ports
- New multi-VP screenshot
The printer only sends PAUSE via MQTT gcode_state, never PAUSED.
Removed all unreachable PAUSED comparisons from frontend (4 files)
and backend (2 files).
Library files are stored on disk with UUID-hex filenames for uniqueness,
but archive_print() used the disk path as the display name. Pass the
original LibraryFile.filename through from both the print scheduler and
direct-print-from-library flow so the archive's filename, print_name,
and directory name all use the human-readable name.
Add color-matching fallback for slot-to-tray mapping on printers that
don't provide the MQTT mapping field (snow encoding) or reject request
topic subscription. Matches 3MF filament slot colors against AMS tray
colors to resolve the correct physical tray. Returns no match when
colors are ambiguous (duplicate tray colors) to safely fall through
to existing fallbacks.
Mapping priority chain: print_cmd → MQTT snow → queue → color match →
tray_now → slot_id-1.
On dual-nozzle printers (H2C, H2D Pro) with multiple AMS units, usage
tracking attributed filament consumption to the wrong spools. The MQTT
mapping field — a snow-encoded array mapping slicer slots to physical
AMS trays — was preserved in state but never parsed.
Add _decode_mqtt_mapping() to convert snow encoding (ams_hw_id * 256 +
slot) to bambuddy global tray IDs. Insert as priority 2 in the mapping
resolution chain, after print_cmd ams_mapping but before queue/tray_now
fallbacks. Works for all printer models and print sources.
AMS-HT trays (IDs 128-135) are single-slot units, but the snow_slot
computation used `snow_tray % 4 if snow_tray < 128 else -1`, yielding
-1 for AMS HT. This caused a misleading "slot mismatch" debug log on
every MQTT update despite producing the correct tray_now value. Now
returns slot 0 for AMS-HT IDs (128-135), matching the firmware's
tray_now=0 for these single-slot units.
P2S (and X1C) with multiple AMS units incorrectly entered the H2D
dual-nozzle tray_now disambiguation code path, causing warning log
spam. The check `tray_now <= 3` matched any printer loading from
AMS 0. Now uses a persistent `_is_dual_nozzle` flag detected from
device.extruder.info (>= 2 entries), which only dual-nozzle printers
(H2D, H2D Pro) report. Flag is set early in message processing so
it's available before AMS data is parsed.
Recent BambuStudio/OrcaSlicer updates require a bind/detect handshake on
port 3000 before connecting via MQTT/FTP. Without this, slicers cannot
discover or connect to the virtual printer in any mode.
- Add BindServer for server modes (immediate/review/print_queue)
- Add TCPProxy for raw TCP forwarding (proxy mode)
- Update Dockerfile (EXPOSE 3000) and docker-compose.yml (bridge port)
- Add 10 new tests for BindServer protocol and integration
Some printer MQTT brokers (e.g. P1S) reject subscriptions to the request
topic by killing the TCP connection, causing a disconnect loop. The request
topic subscription for ams_mapping capture is now fail-safe with two
detection paths:
- SUBACK rejection: on_subscribe callback detects failure code 0x80
- Broker kills connection: on_disconnect detects disconnect within 10s of
unconfirmed subscription attempt
After detection, the request topic is disabled for that printer and
reconnection succeeds with only the report topic. Printers that support
the request topic (e.g. X1E, H2D) get ams_mapping capture; printers that
don't (e.g. P1S) gracefully degrade to tray_now-based tracking.
Subscribe to the MQTT request topic (device/{serial}/request) to intercept
print commands from any source (BambuStudio, OrcaSlicer, Bambu Handy, or
Bambuddy itself). Captures ams_mapping from project_file commands and passes
it through print start/complete callbacks. Fixes wrong tray attribution on
H2D Pro when prints are started from external slicers.
Usage tracking works on X1E but fails on H2D Pro — the wrong tray
is identified, attributing usage to the wrong spool. The root cause
is unknown because we don't know what MQTT mapping data each printer
model reports.
Adds INFO-level logging at print start and completion:
- state.raw_data["mapping"] (unknown format, preserved but never parsed)
- tray_now, last_loaded_tray values
- All raw_data keys containing "map" (discovery)
- Per-AMS-tray summary: tray_type, tray_color, tray_now, tray_tar
This enables comparing MQTT behavior across printer models without
requiring DEBUG mode, so testers can send normal logs.
Three fixes for inventory spool usage not updating after prints:
1. Store ams_mapping from print command (reprint, library print, queue)
so the usage tracker maps 3MF slots to the actual physical trays
the user selected, not the default slicer mapping.
2. Track last_loaded_tray on printer state — the last valid tray_now
(0-253) seen during printing. On H2D printers, tray_now is always
255 in AMS data; the real tray resolves via snow field ~44s after
print start but reverts to "unloaded" at completion. The fallback
chain is: tray_now_at_start > current tray_now > last_loaded_tray.
3. Use color similarity (Euclidean RGB distance, threshold 50) instead
of exact hex match for auto-unlink fingerprint checks. RFID sensors
report slightly different shades across reads (e.g. distance ~43.6
for the same spool), causing false assignment unlinks after prints.
When a print was queued from the file manager (library_file_id path),
the scheduler never created an archive or called register_expected_print().
This forced on_print_start to re-download the 3MF via FTP, and if that
failed, a fallback archive with no file was created — breaking 3MF-based
filament usage tracking entirely. The queue item's archive_id also stayed
NULL, so the usage tracker couldn't find the AMS slot mapping.
Now the scheduler creates an archive from the library file before uploading,
sets item.archive_id, and the existing register_expected_print() call fires
since archive is no longer None.
Add a "Clear Errors" button to the HMS error modal that sends
clean_print_error via MQTT and locally clears hms_errors for
immediate UI feedback. Useful for dismissing stale print_error
values that persist after print cancellation or transient events.
Pushover and Discord already received print thumbnails, but Telegram
and ntfy only got text. Telegram now uses sendPhoto with the image as
a caption attachment. ntfy sends the image as a binary PUT with
Filename/Message headers. No config changes needed.
The duplicate badge on archive cards only matched by content hash,
so re-sliced prints of the same model (different GCODE, same name)
were not flagged. Now also matches by print name (case-insensitive),
consistent with the detail view's find_duplicates() logic.
The firmware update cache stored downloaded files under a mangled name
(e.g. X1C_01_09_00_10.bin) instead of the original filename from
Bambu Lab's CDN. On cache hit the wrong filename was uploaded to the
printer's SD card, so the printer couldn't find the firmware file.
Now caches with the original filename so it's always correct.
Add a chronological, table-based print log as a 4th view mode in the
Archives page. Log entries are stored in a separate print_log_entries
table — clearing the log never touches archives or queue items.
Backend:
- New PrintLogEntry model with independent table
- GET /print-log/ endpoint with search, printer, user, status, date filters
- DELETE /print-log/ clears only log entries
- Thumbnail serving endpoint for log entries
- write_log_entry() service called on print completion
- Auth: ARCHIVES_READ for viewing, ARCHIVES_DELETE_ALL for clearing
Frontend:
- New 'log' ViewMode with ClipboardList icon toggle
- Filterable/searchable table with pagination (10/25/50/100 rows)
- Colored status badges, duration formatting, filament color swatches
- Clear button with confirmation modal
- All filter state persisted to localStorage
- i18n: EN, DE, JA, FR, IT translations
Suppress SQL/aiosqlite debug noise (~90% log volume reduction), add
caller-traced PRINT COMMAND logging to start_print(), log scheduler
queue checks, tighten stale archive ilike match to exact match, and
warn on multiple queue items in "printing" status. Includes 18 new
unit tests.
Notify users when the print bed cools below a configurable threshold
(default 35°C) after a print finishes, so they know when to remove parts.
- Backend: DB migration, model, schemas, notification template, service
method, background cooldown monitor (polls every 15s, 30min timeout)
- Frontend: event toggle in provider card/modal, threshold setting in
Settings > Notifications, i18n keys for all 5 locales
- Tests: 4 backend + 4 frontend tests
- Docs: README, website, wiki updated
Downgrade 58 diagnostic logger.info calls to logger.debug in
bambu_mqtt.py — payload dumps, detector state changes, field
discovery, H2D disambiguation, and periodic status updates no longer
flood logs at the default INFO level. User-initiated actions (print,
stop, calibration, AMS load/unload) remain at INFO. Also suppress
paho-mqtt library INFO messages in production mode.
Backend:
- Add dual external spool support for H2D (vt_tray as list: Ext-L/Ext-R)
- Add cloud filament ID map endpoint (/cloud/filament-id-map)
- Fix RFID spool data erased by periodic AMS updates (skip tag matcher
for RFID-tagged trays)
- Fix AMS slot config overwrites RFID spool state
- Fix K-profile selection corrupts existing profiles on X1C/P1S
- Resolve K-profiles filament name via cloud filament ID map
- Update print scheduler and usage tracker for dual external spools
Frontend:
- Add printer model filtering to ConfigureAmsSlotModal (cloud/local/builtin
presets filtered by @BBL model suffix and compatible_printers)
- Add pre-population for configured slots (preset, color, K-profile)
- Add K-Profiles view with accurate filament name resolution
- Internationalize all ConfigureAmsSlotModal strings (en/de/fr/it/ja — 21 keys)
- Add 5 new ConfigureAmsSlotModal tests (model filtering, pre-selection,
color pre-population, i18n)
- Update PrintersPage for dual external spool rendering
Docs:
- Update CHANGELOG, README, website features, and wiki AMS docs
filament_details now shows which AMS unit and tray each filament came
from (e.g. "AMS-A T1 PLA: 12.4g | AMS-A T3 PETG: 2.8g"). External
spool holders show "Ext". Falls back to type-only format when usage
tracking data is unavailable (e.g. Spoolman mode).
- usage_tracker: include spool material in result dicts
- main.py: pass usage_results to notification flow via archive_data
- notification_service: build filament_details with AMS labels when
usage_results available, fall back to existing slot-based format
- Update sample data and changelog
3MF slicer estimates are now the primary tracking source for ALL spools
(BL and non-BL), with AMS remain% delta as fallback. Per-layer G-code
analysis provides accurate partial usage for failed/cancelled prints.
Fix wrong-spool tracking bug: 3MF slot_id was mapped directly to AMS
tray position, but the printer remaps slicer slots at print time. Now
uses queue ams_mapping for queue prints and tray_now from printer state
for single-filament non-queue prints.
Add filament_grams, filament_details, and progress template variables
to print_complete, print_failed, and print_stopped notification events.
Webhook payloads include per-slot filament breakdown. Per-slot data
stored in archive extra_data during 3MF parsing.
Status summary bar on the Printers page now shows availability count
("X available") and a "Next available" indicator with printer name,
progress bar, percentage, and remaining time for the printer finishing
soonest. Always visible when printers are printing; hidden otherwise.
Fix race condition in bulk archive deletion where files were removed
from disk before the database commit. Concurrent SQLite writes could
cause a lock timeout, rolling back the DB delete while files were
already gone — leaving orphaned records with broken thumbnails. Now
deletes the DB record first and only removes files after a successful
commit.
Dual-nozzle H2D/H2D Pro: filament matching now respects nozzle assignments
from the 3MF file. Each AMS unit feeds a specific nozzle (L/R), and the
scheduler/frontend constrain matching to only trays on the correct nozzle.
Falls back to unfiltered matching when no trays exist on the target nozzle.
L/R badges shown in the filament mapping UI. Translated in en/de/ja/it.
Fix AMS slot config overwritten on startup: on_ams_change unconditionally
unlinked BL spool assignments on every MQTT pushall, then re-assigned them
sending ams_filament_setting without setting_id — clearing the printer's
filament preset. Now compares spool RFID identifiers before unlinking.
Fix BL spool detection false positives: removed tray_info_idx from detection
logic in both backend is_bambu_lab_spool() and frontend isBambuLabSpool().
Third-party spools using Bambu generic presets had GF-prefixed tray_info_idx
values, causing misidentification. Now uses only tray_uuid and tag_uid.
SQLite WAL mode with 5s busy timeout reduces "database is locked" errors.
maziggy