The filament list is positional from the modal down to the CLI's
filament_N.json parts, but for a source that already carries slice_info the
requirements endpoint returns only the slots the plate consumes. A
MakerWorld model declaring four filaments and painting with slot 4 alone
therefore showed one dropdown, whose PETG pick the CLI bound to slot 1 —
slot 4 sliced with the profile baked into the source, and the print came out
PLA.
The endpoint now takes full_slots, which widens that answer to every
project slot with used_in_plate flags, and only the slice modal passes it.
Print-time AMS matching shares the endpoint and keeps the used-only list, so
it still asks for exactly the spools the job needs.
setInterval does not await an async callback. Slicing a large project
blocks the backend for seconds, so poll ticks piled up behind one stalled
request, each holding a snapshot taken while the job was still active.
They resolved together, and every one of them ran the completion path —
one toast and two query invalidations each. A 20s stall against the 1.5s
interval produced 13 "Sliced X" toasts from a single slice.
Only one poll round is now in flight at a time, which also stops queueing
requests against a backend that is already saturated. Completion is
recorded once per job id, and a round still awaiting a response when the
effect tears down now returns instead of acting.
The Filament Mapping panel reported "(Ready)" with a green tick for a slot
where the slice wanted dark red and the auto-matched tray held dark green.
Manually picking that same tray reported the mismatch correctly, which is
what made it obvious something was inconsistent.
Auto-match ranks candidates by tray_info_idx first, and a uniquely-matching
preset was accepted as definitive on the premise "same preset = same spool =
same colour". The preset names the variant, not the spool: GFA00 is PLA
Basic, GFA01 PLA Matte, GFA17 PLA Translucent, in every colour Bambu sells.
The reporter's own bundle has eight GFA00 trays in eight colours. With one
Matte spool loaded, every Matte requirement idx-matched it and the colour
comparison was never reached - which is why this surfaced on PLA Matte and
not on Basic, where several spools are usually loaded and the match falls
through to the branch that does compare colours.
The verdict now comes from the tray that was selected rather than from which
rule selected it, and both branches share one comparison so they cannot
drift apart again. Selection is unchanged - the right variant still wins per
mismatch and the slot stays selected.
A requirement with no colour at all is treated as satisfied rather than
mismatched; 3MFs that omit it parse to "" and there is nothing to disagree
with. That also affects the manual branch, which used to flag it.
No dispatch change: _get_missing_force_color_slots already required an exact
colour, so force colour match was gated correctly throughout.
Follow-up to #2680: the calendar toggle only put dates on the file pane, so
the folder tree had no way to show the timestamp it was already sorting on.
FolderTreeItem now takes showModified and renders latest_activity_at under
the folder name, threaded through the recursive call so nested folders get it
too. No backend change - the field was already on the wire from the sort fix.
Folders are labelled "last activity", not "last modified", and get their own
i18n key. The value is the newest timestamp among the folder, its files and
everything below it, so a folder can read as newer than its own directory
mtime - calling that "modified" would look like a fresh instance of the
ls -lt mismatch the issue was originally about. Folders with no activity
render nothing rather than an Invalid Date placeholder.
The name span moved into a flex column so the second line does not disturb
the row's link badge, file count or kebab menu. That broke a folder-delete
test that reached the row via parentElement, now fixed to use closest().
Separately, the #996 collapse describe left an implementation on the
module-global localStorage.getItem mock, which silently collapsed the folder
tree for every describe after it. It resets in afterEach now; without that,
any later test asserting on nested folders fails for reasons unrelated to
what it is testing.
The hook is mounted globally in WebSocketProvider, so refetchInterval on its
per-printer status queries added one request per printer every 30s on every
page. The Printers page already runs that fallback on the same query key, and
useWebSocket writes ['printerStatus', id] straight into the cache, so the poll
bought nothing outside the Printers page and cost a request per printer per
tab everywhere else.
Also captures document.title at mount instead of restoring to a hardcoded
'Bambuddy', so the default no longer has to be kept in sync with index.html.
jsdom has no canvas backend, so getContext('2d') logged a "Not implemented"
jsdomError with a full React stack on every run of the hook's tests, and the
favicon branch bailed on the null context and went untested. Stubbing
getContext/toDataURL removes the noise and lets the ring code run, so the
favicon swap and the restore-on-toggle-off path are now asserted.
Telegram groups with Topics enabled always received notifications in the
General topic, since only Bot Token and Chat ID were configurable. Splitting
notifications per printer meant running a separate chat for each one.
The Telegram provider now takes an optional Forum Topic ID - the last number
in a topic's link, t.me/c/1234567890/25 - and routes its messages there. Left
empty, nothing changes.
The value is coerced to an int once in _send_telegram and attached to both the
sendMessage JSON body and the sendPhoto form data. That ordering matters:
Telegram rejects a string message_thread_id in the JSON body while accepting
one in the multipart call, so passing the raw form value through would have
worked for thumbnail notifications and 400'd for plain-text ones. A
non-numeric value is rejected in the form and again server-side before any
request goes out.
No migration - provider config is a JSON blob.
Adds Forum Topic ID plus help text to the Telegram section of the provider
dialog, translated in all 13 locales. Backend tests cover omitted / blank /
int-typed / non-numeric values and both send paths; frontend tests cover the
field being optional, absent for other providers, round-tripping on save, and
blocking save on a bad value.
Optional and off by default, toggled under Settings -> Appearance. When enabled, the browser tab shows the soonest-finishing print's percentage plus a green progress-ring favicon, updated live over the existing WebSocket. The preference is stored per-browser in localStorage.
Adds the usePrintProgressTitle hook (with tests), a ThemeContext preference, the Settings toggle, i18n strings for all locales, and a README entry.
The uk locale was inserted before ru in i18n/index.ts - in the import block,
the resources map and availableLanguages. Locales are appended to those lists
as they land (tr, then ru on 2026-07-19, then uk on 2026-07-28), and
SettingsPage renders availableLanguages in array order, so the picker showed
Ukrainian above Russian while every other entry followed the order it was
added.
Moves uk to the end of all three lists. SUPPORTED_LNGS is sorted
alphabetically and already had uk in the correct position, so it is unchanged.
Frontend-only, no behaviour change beyond the picker's row order.
A printer with a wrong access code gave no explanation anywhere. The connect
callback's failure branch was a bare `state.connected = False`, discarding the
CONNACK reason code the printer had just sent, so the only trace was paho's
follow-up disconnect -- logged every 30 seconds as "rc=Unspecified error",
which is exactly what a powered-off printer produces. In the report behind this
fix one of three printers had been in that loop for the whole capture, and
neither the log nor the support bundle could say why.
Bambu speaks MQTT 3.1.1, whose CONNACK return codes 4 and 5 paho maps onto
reason codes 134 and 135. Both are now logged with the printer's own reason
string and, for those two, the remedy: the access code is regenerated whenever
LAN Only or Developer Mode is toggled, so it has to be re-read from the screen.
The access code itself is never logged -- it would land in every bundle.
The reason is kept on the client as a stable slug and plumbed through
test_connection into the connection diagnostic, which now distinguishes two
cases it previously conflated. "The printer refused our credentials" is
asserted only when the printer said so; when all Bambuddy knows is that there
is no session, the text hedges and names the alternatives (rebooting, or
already at its limit of simultaneous connections). The old wording claimed the
access code was most likely wrong in both cases.
Frontend needed no change -- ConnectionDiagnostic already renders
`<status>_<reason>` variants with fallback to the plain per-status text, so an
unrecognised slug degrades to today's wording rather than a missing key.
Place the left auxiliary fan badge before the right-hand auxiliary badge so
the row reads part cooling -> left aux -> aux -> chamber/exhaust, matching
the printer's physical left-to-right arrangement.
Adds a test asserting the rendered badge order.
The P2S/X2D have two fans bambuddy didn't fully handle. On the P2S both are
add-on kits; on the X2D they ship from the factory.
1. Left auxiliary part cooling fan — not shown or controllable. It is reported
ONLY as device.airduct part id 10 (raw id 160 >> 4; FAN_REMOTE_COOLING_1 in
Bambu Studio's DevFan::ParseV3_0) and is never mirrored into a flat
big_fanX_speed field, which is why it was invisible. This is the gap
identified in #2576, where the single 'Auxiliary' fan (big_fan1 / M106 P2)
only reaches the right-hand aux fan.
2. Chamber exhaust fan — shown on every P2S labelled 'Chamber Fan'. On P2S/X2D
Bambu's firmware/UI (and Bambu Studio's FAN_CHAMBER_0_IDX) call it 'Exhaust',
and it is a kit on the P2S rather than built in.
Both are now detected from device.airduct.parts, which lists only the fans that
physically exist, so each tile appears only when the hardware is present.
- bambu_mqtt: parse airduct part 10 -> left_aux_fan_speed (None when absent) and
part 3 presence -> exhaust_fan_present; set_fan_speed() accepts index 10 plus a
set_left_aux_fan() helper
- schema / status route / printer_manager broadcast / mqtt_relay expose both fields
- POST /printers/{id}/fan-speed accepts fan=aux2 -> M106 P10, the command Bambu's
official P2S machine profiles use
- frontend: 'Left Auxiliary Fan' tile shown when reported; big_fan2 tile labelled
'Exhaust' and presence-gated on P2S/X2D, unchanged 'Chamber Fan' elsewhere
- i18n: leftAuxiliary + exhaust for all 12 locales
Verified fan -> field map on a live P2S (fw 01.02.00.00), stable across cooling
and heating airduct modes:
Part cooling -> cooling_fan_speed / airduct id 1 (built in)
Aux -> big_fan1_speed / airduct id 2 (built in)
Exhaust -> big_fan2_speed / airduct id 3 (kit)
Left aux -> airduct id 10 only (kit; forced off in heating by mode config)
Tests: airduct id-10 parsing (raw 160 -> id 10, not literal 160), id-3 presence,
base-P2S absence, diff-push survival, clamping, malformed entries, M106 P10
emission, invalid-index rejection; fan-speed API aux2->10 mapping; frontend tile
presence and labelling per model/kit.
The Ukrainian locale was authored before #2622 landed and merged dev in
without picking up the five slice.designSettings* keys that came with it, so
check:i18n failed at 5675 leaves against en's 5680. This is invisible on the
PR because ci.yml only triggers for pull requests targeting main, and this one
targets dev - the only checks that ran were the security workflow's.
Adds the five missing keys, following the file's own convention of rendering
"designer" as "автора" as it already does in slice.useEmbeddedHint.
Two values were still English and the parity gate could not see them, because
check 4 only fires on leaves byte-identical to en: profiles.localProfiles.
pressureAdvance and inventory.paProfileTab both read "Pressure Advance (PA)"
where en has "Pressure Advance" and "PA Profile". The added "(PA)" was enough
to walk past the equality test. Both are now translated, the second as a tab
label matching the Russian. Inline mentions of the term in profiles.subtitle
and kProfilesDescription stay in English, which is what ru does too.
failureDetection.mlUrl is translated rather than allow-listed, and the dead
'{{weight}} г' entry is dropped from UK_COGNATES - that list matches against
the English value, so an entry spelled in Ukrainian could never fire, and
since the unit is now localized no entry is needed at all.
Four straight apostrophes normalized to the typographic form used by the
other 186 in the file. Locale count in the README and the two wiki pages
corrected from 11 to 13; it had already been wrong, omitting Russian.
Published models often deviate from the stock Bambu profile on purpose -
five walls, 100% infill, a 0.1mm first layer. Re-slicing one for a
different printer discarded all of it: the picked process preset
overrides the file's embedded settings, and that override is precisely
what makes cross-printer re-slicing work, so it cannot just be dropped.
"Slice as designed" (#2611) does not help - it is all-or-nothing and
only offered when the picked printer already matches the design's
target.
The deviation list does not have to be computed. Bambu Studio writes it
into the 3MF as different_settings_to_system, laid out as
[process, *filaments, printer] - verified against real files at 2, 3 and
4 filament slots. The parser refuses any file whose array length
contradicts its own filament count rather than guessing an index, since
reading the printer slot as the process slot would carry the designer's
machine_start_gcode onto a foreign printer.
The slice dialog now lists exactly which print settings the author
changed and what each was set to, with a checkbox per setting. Design
intent - wall count, infill, layer and first-layer height, supports,
seam, brim, ironing - is ticked by default. Printer-specific values -
speeds, accelerations, jerk, fans, temperatures, prime-tower geometry -
are listed with a badge but start unticked: tuned for the author's
machine, they can be merely wrong on the target or outside the range its
profile accepts, which fails the slice outright.
Only ticked keys are sent, and only keys the source actually flags as
changed are applied. Values are written into the outgoing process JSON,
the same mechanism the support carry-over has used since #1881: for a
Standard preset pick that JSON is an inherits stub, so the patch is the
child in the chain and wins over the flattened parent. Process slot
only - filament picks are honoured as chosen.
The wiki's "this is not a settings merge" note under Slice as designed
described the gap this closes; rewritten to point at the new panel.
Translated in all locales; wiki updated. Covered by backend and frontend
tests.
Size S exists for one job: watching a whole fleet on a single screen. It
rendered the printer name, a status pip and a progress bar - every other
block on the card is gated behind the expanded view - so it could not
answer the question that view is for, "which printer finishes first".
Dropping to S to fit more printers meant losing the information you
dropped down to compare.
The compact card now carries one line of metrics under the progress bar
while a print is running: remaining time, ETA in the configured
12/24-hour format, and layer progress. These are the values the Medium
card already shows, rendered with the same formatters and the same ETA
styling so the two sizes read alike. Each value is omitted individually
when the printer does not report it, and the row holds its height when
nothing is printing so cards do not shift as prints start and finish.
Card dimensions and grid density are otherwise unchanged.
Frontend only. Wiki updated. Covered by tests - which required teaching
the new test file to mock localStorage.getItem, since the harness
replaces localStorage with bare vi.fn() stubs and setItem is a no-op;
without that the page falls back to its size-M default and the compact
branch never renders.
When a print reaches a terminal state Bambuddy holds the queue until
someone confirms the build plate is clear. That gate was visible only in
the Web UI: the printer's own MQTT push reports nothing beyond RUNNING,
PAUSE, FAILED, FINISH and IDLE, so an external automation could not tell
"finished" from "finished and still waiting for a human".
The per-printer status topic now carries an awaiting_plate_clear field,
and every transition is additionally published on a new retained topic,
bambuddy/printers/{serial}/plate_clear. Retained, and published from the
flag itself rather than from printer telemetry: a subscriber learns the
state of every printer the moment it connects, and the state stays
correct after Auto Off powers a printer down - telemetry stops there,
which would otherwise leave the status topic frozen at false.
Publishing is edge-triggered. The queue clears the gate on every
dispatch whether or not it was up, and no subscriber should see a
"plate cleared" for a plate that was never dirty. Persistence and the
WebSocket broadcast stay unconditional; they are idempotent and predate
this.
A matching Plate Clear Required notification event was added, off by
default on every provider because it fires after every print at the
same moment as the print-complete alert. Only the rising edge notifies.
Acknowledging still goes through POST /printers/{id}/clear-plate.
Two tests in test_printer_manager_status_broadcast.py asserted
_schedule_async.call_count == 2 for the setter. The new emission makes
it three on a transition, so they now assert that the persist and
broadcast coroutines are actually scheduled - which is the contract
Translated in all locales; wiki updated. Covered by backend and
frontend tests.
A spool created by Quick Add, a CSV import or an RFID scan has no slicer
preset, brand or subtype. Reopening it in Edit Spool demanded all three
before anything could be saved, so changing its storage location, cost
or notes was impossible - and Copy Spool had the same gate with no Quick
Add toggle to waive it. The preset you were then forced to pick auto-
filled material, brand and subtype from the preset name, silently
rewriting a hand-entered manufacturer (Elegoo -> Generic) so the spool
no longer appeared where it had been filed.
Editing and copying now require only what the backend requires: the
material. Preset, brand and subtype stay fully visible and editable -
nothing is hidden the way Quick Add hides it - and the required-field
markers no longer advertise a rule that isn't enforced. Selecting a
preset fills only fields that are still empty or that a previously
selected preset had filled, so values the user (or the saved spool)
provided survive; switching between presets still replaces what the
earlier one contributed.
The brand and material dropdowns also no longer filter themselves down
to the brand/material pairs known to the color catalog and slicer
presets. Elegoo is catalogued only for PLA, which made a real product
like Elegoo ASA look impossible to enter. Both lists now always offer
everything known, with paired entries ranked first under Suggested and
the rest under All, and a spool's own custom brand or material is always
present in its own dropdown. The SpoolBuddy write-tag form shares these
fields and gets the same treatment.
Lastly the Quick Add layout no longer leaks out of create mode: quick-
adding a spool and then opening Edit left the edit form in the reduced
layout with no toggle to leave it, because the toggle is create-only.
Frontend only. Translated in all locales; wiki updated. Covered by
validation and form-interaction tests.
Projects made of many distinct files that each need N prints (e.g. 13
plates x 10 sets = 130 prints) only had aggregate progress. Finding out
"how many times have I printed plate_7?" meant reading the Activity
Timeline line by line, unusable at 130 events.
Projects now take an optional Copies per File target. Every printable
file in the project's linked folders shows an X / N badge with a mini
progress bar (gray not started, amber in progress, green done), and the
progress card gains a Complete Sets bar - the minimum per-file count,
i.e. how many finished assemblies can be shipped right now. Without the
target, printable files show a plain printed-count badge.
Counting matches the aggregate project stats: completed runs only,
served by a new /projects/{id}/file-progress endpoint. Runs attribute
to a file via a new library_file_id stamp on queue-dispatched archives,
falling back to content hash and then filename for historical rows.
Also fixed: files queued from a project-linked File Manager folder now
inherit that project, so their prints count toward project statistics -
previously only prints started from the project page were attributed.
Test-harness fix along the way: the test suite's get_db override never
committed, unlike production get_db, so endpoints relying on the
request-scoped commit silently lost their writes in tests. The override
now mirrors production commit/rollback semantics.
Library folders have no ownership tracking, so folder deletion was
gated entirely behind library:delete_all - a user with
library:delete_own could create folders and delete their own files,
but the emptied folder sat there until an admin removed it.
Users with library:delete_own can now delete folders that are truly
empty: no subfolders and no files, including trashed ones - folder
deletion cascades, so removing a folder that holds another user's
trashed file would silently break trash restore. External folders
(operator-configured mounts) and folders linked to a project or
archive still require library:delete_all even when empty, since
deleting them affects more than the folder itself. The bulk-delete
endpoint applies the same rule instead of skipping all folders for
non-admin users.
The folder tree's Delete entry enables accordingly and shows a
"You can only delete empty folders" hint on non-empty folders. The
backend stays authoritative - a folder that only contains trashed
files is invisible in the tree but still refuses deletion.
The live Obico classification was only visible under Settings ->
Failure Detection, so tracking how detection matched an ongoing print
meant flipping between the Printers screen and Settings.
Each printer card's badge row now shows an AI badge whenever detection
is enabled for that printer, like the other health badges: gray Idle
while no print is being watched, then green Safe, amber Warning, or
red Failure while a print is actively monitored. The tooltip carries
the current smoothed score; clicking jumps to the full detection
status and history in Settings. Printers excluded from the monitored
subset show no badge.
Served by a new lightweight /obico/printer-status endpoint readable
with printer permissions alone - it exposes only the enabled flag, the
monitored-printer set, and per-printer classification, keeping ML URL
and other configuration behind the existing settings-gated endpoint.
Bark is the open-source, account-free iOS push app (self-hostable
via bark-server). Configure with just the device key from the app;
the server URL defaults to the official api.day.app relay and
accepts a self-hosted instance. Optional settings: notification
Group, Sound, and iOS Interruption Level - Time Sensitive breaks
through scheduled summaries, Critical bypasses Silent mode and
Focus, Passive delivers silently.
bark-server can wrap failures in an HTTP 200 body ({"code": 400}),
so the sender checks the body code as well as the HTTP status.
Unknown interruption levels are dropped rather than forwarded.
When an HA notification provider targets a notify service (e.g.
notify.mobile_app_myphone), a new optional Data (JSON) field is
forwarded as the service call's nested "data" object - the same
place HA automations put mobile push options like priority, ttl,
channel, and group. ttl: 0 + priority: high make Android pushes
arrive immediately; channel gives printer alerts their own sound.
JSON rather than key=value lines so numbers stay numbers and nested
options work. Validated on both ends: the UI rejects malformed JSON
before saving, and the sender fails loudly instead of posting a
half-built payload. Only included when configured - the default
persistent_notification.create path is unchanged, as its schema
rejects unknown keys.
The Most Expensive record on the Statistics page ranked prints by
filament cost alone, ignoring the per-print energy cost Bambuddy
already measures via an attached smart plug. It now ranks by
filament + measured energy cost; prints without smart-plug data
compete on filament cost alone, as before.
Filament Trends gains an Energy Over Time chart: kWh per day (per
hour for ranges of a week or less, per week for long ranges), with
the range's total kWh and energy cost in the header. The chart only
renders when the selected range contains measured energy data, so
setups without smart plugs see no change.
The /archives/slim stats feed now carries each run's energy_kwh /
energy_cost from print_log_entries. Translated in all locales.
Covered by backend and frontend tests.
The Edit Spool "PA-Profil" tab and the SpoolBuddy write-tag page fetched a
printer's calibrations with getKProfiles(printer.id), which defaults the nozzle
filter to 0.4. The printer/MQTT layer filters strictly by that diameter, so on
a multi-nozzle printer a same-filament 0.6mm K-profile was never retrieved and
the picker showed only the 0.4mm entry ("1 match"). (The AMS-Slot config dialog
was already fixed in #1899; these two pickers were not.)
Add installedNozzleDiameters(status) and a shared fetchPrinterCalibrations()
that queries every reported nozzle diameter and merges the results, falling
back to 0.4 when the printer hasn't reported nozzle hardware. Each profile row
now shows a nozzle-diameter badge so identically-named profiles are distinct.
- postcss 8.5.15 -> 8.5.23 (GHSA-r28c-9q8g-f849, source-map path traversal)
- brace-expansion override ^5.0.7 -> ^5.0.8 (GHSA-mh99-v99m-4gvg, DoS)
react-router: pin react-router-dom to exact 7.18.1 (direct dep) and react-router
to 7.18.1 via overrides (transitive). 7.18.1 is the most-patched 7.x -- it clears
14 advisories that older 7.x releases carry, several reachable from a SPA (open-
redirect XSS in Link/useNavigate, route-matching DoS). The one remaining advisory,
GHSA-qwww-vcr4-c8h2, is RSC-mode-only; Bambuddy is a Vite SPA using BrowserRouter
with no RSC runtime (@react-router/server not installed), so the path is
unreachable. The only version that fully clears npm audit is the 8.3.0 major
(no react-router-dom 8.x exists; it needs migrating 50 import sites plus a React
peer bump), deferred as its own change.
Because a version pin can't stop npm from reporting the theoretical 7.11.0
downgrade as fixAvailable, the ci.yml (hard) and security.yml (nightly issue)
audit gates gain a narrow, documented allowlist keyed on the GHSA id. It resolves
the react-router-dom -> react-router advisory chain and stays fail-closed: a
different advisory on react-router still fails the gate, and an isSemVerMajor
guard drops the exemption the moment a non-major fix ships, forcing us to take it.
The Print Queue History tab reported the full count in its header (e.g.
"History (311 items)") but the row builder hard-sliced the list to
items.slice(0, 50) with no control to load the rest, so everything past the
50th finished print was unreachable. The whole history is already loaded
client-side (the queue endpoint has no limit) and sorted -- it just wasn't
drawn.
History now renders progressively: the first page (50) plus a "Show more"
button and a "Showing X of Y" count that loads the next page until the full
list is on screen. The visible count resets to one page only on a deliberate
re-sort or location-filter change -- not on the periodic queue poll, which
produces a fresh array each tick and would otherwise collapse an expanded
view mid-scroll.
Frontend-only; batch grouping and per-row actions unchanged. Two new i18n
keys across all 12 locales. Covered by a test asserting the 50-row cap, the
count label, and that Show more reveals the remainder. Wiki updated.
The folder tree's "sort by recent activity" and the file pane's date sort
put external (mapped/NAS) files in a near-random order instead of ls -t's
newest-first. Nothing captured the files' on-disk mtime: the sort keyed off
the DB updated_at/created_at, which for a bulk external scan is the same
scan instant for every row, so a whole block tied and sorted arbitrarily;
only rows Bambuddy had later touched individually looked "partially right."
The tree also bubbled up only immediate child-file activity, so a file added
deep in a subtree never lifted its parent folders.
- Add nullable fs_modified_at to LibraryFile and LibraryFolder (dialect-
branched migration, mirroring the #2615 dispatching_at pattern).
- External scan records each file's and directory's real os.stat().st_mtime
and refreshes it on every re-scan, so a file edited over the mount
re-sorts and existing installs backfill on the next scan.
- list_folders computes each folder's activity as a recursive newest-
descendant roll-up (post-order), so a fresh deep file lifts every ancestor.
- Folder tree sort and the file pane's date sort now use the real mtime,
falling back to created_at for managed uploads with none.
- New toolbar toggle shows/hides each item's last-modified date in the right
pane (grid + list), with strings in all locales.
Store the mtime as naive UTC to match the other timestamp columns so activity
comparisons never mix naive and aware values on either dialect. Covered by
integration tests (mtime capture, re-scan refresh, deep-file recursive bubble,
folder mtime) and a frontend test proving fs_modified_at is preferred over
created_at.
In the Print dialog's Filament Mapping, each required filament shows its
name and the grams the job needs, e.g. "Bambu PLA Basic (281.2g)". Name and
grams shared one fixed-width column with truncate on the whole string, so a
long name pushed the "(...g)" off the end and clipped it -- partially on a
wide screen, entirely in mobile portrait. The gram usage is the number that
matters (does the spool have enough left?), so it shouldn't be the part that
gets dropped.
Pin the gram usage (shrink-0, whitespace-nowrap) and let only the name
truncate, with the full name on hover. Applied to both the Specific-Printer
(FilamentMapping) and Any-model (PrinterSelector) panels. Layout only.
The print queue couldn't be reordered on a phone. In portrait the drag
grip and selection checkbox are hidden below the sm breakpoint, so there
was no reorder affordance at all; in landscape the grip shows but it
carried touch-action: manipulation while the only dnd-kit sensor is a
PointerSensor with an 8px distance, so touch gestures scrolled instead of
starting a drag. Reordering was effectively mouse-only.
Add tap-friendly up/down arrow buttons to pending rows on mobile (shown
below sm, where the drag handle is hidden). They move a row one step among
its siblings -- standalone items, whole batches, and items within a batch,
in both the flat and per-printer layouts -- and persist through the same
POST /queue/reorder path as drag. Arrows appear only in the manual
"position" sort (shortest-job-first off) where position has meaning, are
gated on queue:reorder, and the first row's up / last row's down render
disabled. Also switch the desktop drag handle's touch-action to none so
mouse-style drag works on touch (landscape phones, tablets). Reuses the
existing queue.moveUp / queue.moveDown translations.
The File Manager 3D Preview dialog (ModelViewerModal) rendered plate
thumbnails with the raw thumbnail_url. The plate-thumbnail endpoints are
gated behind a camera stream token passed as ?token= (an <img> can't send
an Authorization header), so with auth enabled the browser fetched without
a token and got 401 "Valid camera stream token required" — broken image
icons for every plate. The Slice dialog's picker (PlatePickerModal) and the
Print modal's PlateSelector already append the token via withStreamToken(),
which is why the same file's thumbnails showed there.
Wrap the thumbnail src in withStreamToken(), matching the other two call
sites. The token is synced app-wide and withStreamToken() is a no-op when
auth is off, so non-auth setups are unchanged.
Follow-up to 0f203ce: force color match now picks the right AMS slot, not
just the right printer. The slot mapper cleared tray_info_idx when applying
an override, so on a printer holding two same-colour PLA spools of different
variants (Basic GFA00 / Matte GFA01 / Silk GFA06) it could map to the wrong
one. It now keeps the variant for force_color_match overrides (both the 3MF
and no-3MF fallback paths) so the matcher pins the matching tray, and falls
back to type+colour when that variant isn't loaded. A manual filament swap
(a preference override) still clears the idx so it matches the swapped-in
spool rather than the old one.
The printer-card queue-compatibility hint applies the same variant rule.
Moves react-router-dom/react-router 7.16.0 -> 7.18.1, off the range
flagged by GHSA-wrjc-x8rr-h8h6 (open redirect via backslash in Link/
useNavigate), GHSA-h8fp-f39c-q6mh (RSC), and GHSA-337j-9hxr-rhxg (SSR
hydration). The latter two need RSC/SSR, neither of which this
client-only SPA uses; the open-redirect one is the only reachable path
(post-login redirect), already guarded by sanitizeRedirectTarget.
Stays within the existing ^7.16.0 caret, no new transitive deps. Rebuilt
the static bundle. npm audit now reports 0 vulnerabilities.
npm audit flagged both against the production dependency tree, and the
Frontend Security job fails on any fixable high-severity finding there
(FIXABLE HIGH: linkify-it).
linkify-it 5.0.1 -> 5.0.2 (GHSA-v245-v573-v5vm, high, CVSS 7.5) fixes a
quadratic-complexity DoS in the mailto: validator scan loop. It reaches us
only through prosemirror-markdown inside @tiptap/pm; the editor's own
autolinking uses linkifyjs, which is a different package and unaffected.
Nothing under frontend/src/ imports prosemirror-markdown or markdown-it and
neither appears in the production bundle, so the vulnerable code is tree-
shaken out and no running install was exposed.
dompurify 3.4.11 -> 3.4.12 (GHSA-c2j3-45gr-mqc4, low) fixes a
CUSTOM_ELEMENT_HANDLING bypass of afterSanitizeElements for allowed custom
elements. DOMPurify is shipped, but we never set CUSTOM_ELEMENT_HANDLING and
register no afterSanitizeElements hook, so the bypass has no precondition;
ProjectPageModal additionally passes a strict ALLOWED_TAGS/ALLOWED_ATTR
allowlist.
Both patched versions already satisfy the ranges their parents declare, so
this is a lockfile-only change - no overrides entry needed, package.json
untouched. npm audit reports zero vulnerabilities, npm run build is clean,
and all 2423 frontend tests pass.
Tapping Configure on an AMS slot left the slot popup standing on top of
the filament type/colour dialog it had just opened, so both layers were
on screen at once.
The popup is portaled at z-[60] so it can escape the stacking contexts
sibling printer cards create on the dashboard (#1336), which also puts
it above ConfigureAmsSlotModal and LinkSpoolModal at z-50. Nothing
dismissed it: it is hidden only by the pointer leaving it, and a touch
device never sends that after the tap that opened it. On desktop the
next mouse movement cleared it, which is why this is a tablet report.
FilamentHoverCard and EmptySlotHoverCard now dismiss themselves before
running any action that opens a dialog or navigates away - Configure,
Assign Spool, Unassign Spool, and both Open in Inventory links. The
dismissal clears the pending timer as well, so a queued open cannot
resurrect the card over the dialog.
Actions that report progress inside the popup are unchanged: RFID
re-read, Load and Unload render their spinner there, and Copy UUID its
confirmation tick.
Pairs the top-down plate preview with the slicer's per-object pick mask
(Metadata/pick_N.png), whose pixel colours encode the same identify_id the
firmware's skip command takes, so a click resolves to a real object rather
than an inferred bounding box. Several objects can be selected before one
confirmation; selected and already-skipped items are highlighted on the
plate; the checklist stays available when no mask exists.
view=pick serves only the active plate's mask and 404s otherwise, unlike
every other view. A render returned in a mask's place would be decoded as
object IDs — dark pixels yield small integers that collide with real ones —
and a click would then skip an arbitrary object, mid-print, irreversibly.
The 404 is what tells the UI to fall back to the checklist.
Click mapping goes through the contained rect, since the canvas paints at
mask resolution under object-contain; clicks on a letterbox bar are rejected
rather than clamped onto whichever object touches the border. Confirming
names the object when one is selected and counts them when several are,
which is what plates of identically-named clones need.
No printer-control command path was added or changed; the layer, permission
and existing skip-command guards are untouched.
Slicing for a P2S failed with "filament preset Bambu PLA Basic @BBL X1C 0.2
nozzle (slot 1) is not compatible with printer Bambu Lab P2S 0.4 nozzle" —
naming a profile shown nowhere in the dialog. The picked profile was
"Overture PLA Matte @0.2", whose inheritance chain roots in that X1C profile.
The dialog classifies a profile by its compatible_printers list and falls back
to reading the printer out of its name. That name carries no model, and the
list — present on the imported copy — is not shipped by every source: Bambu
Cloud omits it deliberately (rate limits), and Orca Cloud shipped it but
Bambuddy only mined filament type and colour from the same content.
Orca Cloud entries now carry their own compatible_printers, and the existing
same-name enrichment bridge carries the list onto entries that lack one, in
both directions between the cloud tiers. A bare "@<size>" name tag is read as
a nozzle size as a last resort: it can rule a printer out but never rules one
in, and implausible values are ignored rather than guessed at.
An end-of-print auto-off on a plug that powers a filter fan marked the linked
printer offline and forced its state to "unknown". The mark was unrecoverable:
connected heals on the next MQTT message but state does not (only frames
carrying gcode_state rewrite it, and steady-state push_status frames are
partial), so the printer stayed "unknown" until a manual Force Refresh and the
queue never dispatched to it again.
The offline mark is now an explicit presumption: mark_power_off records the
state it overwrites and _on_message undoes it as soon as the printer sends
another report on its own topic, since inbound traffic proves the power was
never cut. A reconnect discards the saved state, so a genuine power cut is
unaffected. Each plug also gains a controls_printer_power flag (default true,
backfilled) that gates all five power-off paths, and the queue's power-on step
now picks the flagged plug instead of whichever linked plug came first.
Both are transitive dev-only dependencies under eslint (via minimatch and
@eslint/eslintrc) with denial-of-service advisories (GHSA-3jxr-9vmj-r5cp,
GHSA-52cp-r559-cp3m). They are lint/build tooling and not part of the
shipped app, so no running install was exposed. npm audit fix wouldn't move
eslint to the patched releases on its own, so they are pinned through the
existing overrides block in package.json (brace-expansion ^5.0.7,
js-yaml ^4.3.0). npm audit now reports zero vulnerabilities; eslint runs clean.
The A2L reports its 4-slot AMS Lite as unit id 16, but its slot-presence
bitmasks sit at bit base 24 (id 6) and it reports tray_now as a local 0-3
slot. Fed the raw id 16, the ams_id*4+slot convention probed bits 64-67
(always zero) and marked loaded slots empty; the local tray_now was read as
global, so usage deducted from the wrong spool (or not at all); and the
ams_id<=7 DB constraint rejected id-16 Spoolman links.
Normalise the Lite 16->6 at the MQTT ingest boundary so global tray ids land
at 24-27 - matching the firmware's own bit base, working with every existing
ams_id*4+slot consumer, colliding with nothing, and passing the DB
constraint. Globalise tray_now to 24+slot, widen the valid-tray guards, label
the unit "AMS Lite", and build the confirmed ams_mapping2 {ams_id:16,
slot_id:0-3} / flat 0-3 for dispatch. Outbound slot commands translate 6->16
on the wire via a single helper. Self-scoping: only unit id 16 is touched, so
all other printers/AMS types are unaffected. One uncaptured wire field (the
physical global tray on load/cali) is extrapolated and isolated to the helper.
Assigning a spool to an AMS tray pushed ams_filament_setting +
extrusion_cali_sel and reported success immediately, whether or not the
tray accepted it. A silently-dropped assignment never surfaced, and since
a print only deducts from the spool on the exact tray it pulls from, it
also recorded no filament usage - which made the whole thing feel random.
Read the AMS telemetry back after every assign (inventory assign_spool and
the Configure Slot modal) and toast the outcome: loaded when the tray
echoes the pushed tray_info_idx, a warning when the filament loaded but the
K-profile (cali_idx) did not, or not-confirmed after ~30s. Verification
uses the periodic per-tray push (the command ack hardcodes sequence_id 0
and can't be correlated); an on-demand pushall is nudged so it lands
quickly. Covers regular AMS, AMS-HT and external slots; stays silent rather
than inventing a failure if the printer goes quiet. The read-back check
runs on every AMS push because the change-hash excludes tray_info_idx.
Bed levelling, flow calibration, and nozzle-offset calibration were on/off
only, so the sole way to run bed levelling was to force a full level before
every print. Bambu Studio has always offered a third "Auto" state that lets
the printer skip the calibration when it was done recently -- the state most
users actually want. Make these three options tri-state (off/on/auto),
defaulting to auto, and leave vibration/layer-inspect/timelapse as on/off
(Bambu Studio exposes no auto for those).
Wire encoding follows Bambu Studio's source exactly: each option sends a JSON
bool (true only for "on") plus a companion int -- off=0, on=1, auto=2. The
bool fields stay booleans (the #1478 H2S regression); only the companion int
widened from {0,1} to {0,1,2}. #1721's observation that stage 8/39 stays
queued when sending 2 is the auto contract (queued, skipped at runtime if
recent), not a broken "off".
- schemas: TriState = Literal[off/on/auto] with a BeforeValidator coercing
legacy bool / 0-1 / true-false so old clients and un-migrated rows validate
- model + migration: boolean columns -> String; SQLite via column affinity +
data backfill, PostgreSQL via ALTER COLUMN TYPE guarded on information_schema
(verified on both dialects); settings rows normalised true/false -> on/off
- MQTT: start_print takes the tri-state strings and emits the paired bool+int
- Virtual Printer: reconstructs the slicer's auto/on/off from the int companion
(auto_bed_leveling / extrude_cali_flag) in both capture paths
- frontend: CalibrationMode type; off/auto/on segmented controls in the print
dialog, queue bulk-edit, and Settings -> Workflow; calibrationMode_* strings
in all 11 locales
MartinNYHC