The print dialog described every slot from the printer's own telemetry, and
a printer cannot describe a spool it did not sell: a tray record carries no
brand field, tray_sub_brands is left empty for anything that is not a Bambu
spool, and the colour arrives as a bare hex the client resolves against
Bambu's own colour catalogue. A Devil Design PLA Basic Orange assigned in
Bambuddy therefore read as "PLA (Sunflower Yellow)" -- Bambu sell a
Sunflower Yellow at the same FEC600 -- while the printer card, which reads
the assignment, named it correctly. Two views of one slot, disagreeing.
GET /printers/{id}/inventory-remain now carries each bound slot's brand,
material, subtype, colour name and hex alongside the pooling key it already
sent, and the dialog prefers that over telemetry. The fallback is per field,
not all or nothing, so a spool with no stored colour name still gets the
catalogue lookup it had before while its brand and subtype come from the
binding. Resolved server-side because the identity rule differs per
inventory mode -- brand is a column in internal mode and a nested vendor in
Spoolman's, where the subtype is the filament name with its material prefix
stripped and the colour name has a three-step read order Spoolman has no
field for. Spoolman's synthesised colour name, which falls back to the
subtype, is withheld rather than rendered as "PLA Basic (Basic)".
Matching is deliberately untouched and still runs on the printer's
telemetry. The auto-assignment, the colour-mismatch test and the mapping
that actually gets dispatched all read type, colour hex and tray_info_idx,
so renaming a slot cannot make the panel and the dispatcher draw different
conclusions from it. The payload is re-read on every open of the dialog: it
names the slots now, and a spool assigned moments earlier would otherwise
keep its old name for the rest of the thirty-second stale window. Done at
the two readers rather than by invalidating the key from each of the
eighteen places a binding or a spool can change, half of which are internal
paths and half Spoolman ones -- covering some would make freshness depend on
which mode you run.
Two hardening fixes fall out of putting a mapper on this path.
build_slot_materials runs before every queue start through
compute_deficit_for_queue_item, and _map_spoolman_spool walks a dozen nested
fields off the wire, any of which arriving as the wrong type raises
AttributeError rather than ValueError. Naming a slot must never cost a
dispatch, so that call fails soft to no name. The same inputs also reached
_material_identity_spoolman and _normalize_color_for_id, which have always
been on this path and would fail a queue start on a Spoolman record whose
filament is not a dict or whose color_hex is a number; both now read those
as "nothing to pool with". Behaviour for well-formed input is unchanged --
the guards only intercept types that previously raised -- so no pooling key
moves and AMS Filament Backup is untouched.
A print was refused a colour match between two filaments the dialog itself
labelled "Blue". The comparison was right: the slicer profile asked for a
near-pure #0028FF and the slot held Bambu's navy #0A2989, 118 apart in the
blue channel alone and a CIEDE2000 distance of 15, where 1 is a
just-noticeable difference. Nothing on screen said so. A hex that misses the
colour catalogue is named by a coarse family bucket, so both sides resolved
to the same word, and the warning sat between two identical labels with
nothing to reconcile it against. Read as a broken matcher, which is what the
report said, and a fair reading of what was shown.
Where both sides of a mismatch carry the same name they are now qualified by
their hex, and the tooltip names them together: "Same type, different color:
needs Blue (#0028FF), slot has Blue (#0A2989)". Names that already differ are
left alone -- the hex is noise once the words separate them -- and a side with
no name falls back to its hex rather than growing an empty bracket.
The comparison is untouched. It was correct, and its tolerance is not
something to widen on one report: a difference that size would start matching
navy to cyan, and eligibility is the same rule the queue scheduler dispatches
on, so loosening it would change which spool gets printed rather than only
which warning gets shown. This issue was about being able to see why the
warning fired, and a test pins that it still fires.
The strings around it were hardcoded English: the panel's status line, the
required-filament tooltip, the auto-matched marker, the slot placeholder, the
mismatch detail and the type-not-found message. All nine now go through
translation, in all thirteen locales. Two of them -- "Same type, different
color" and "Filament type not loaded" -- turned out to have had translations
sitting in every locale file the whole time, unused, while the component
rendered the English literal beside them. The parity gate could not have
caught any of this: keys that were never added have nothing to compare
against.
A hex is not one colour in Bambu's range. #FFFFFF is Jade White in PLA
Basic, Ivory White in PLA Matte and plain White in six other materials;
popover resolved its title from the hex alone, against a map that keeps
one name per hex, so an ivory Matte spool read "Jade White" while the
profile line beside it correctly read Matte Ivory.
/inventory/colors/map now carries the names collapsing loses, keyed
"<material>|<hex>". An entry is emitted only when it recovers a name the
same manufacturer's own range lost -- 11 of them against the 608 colours
in the shipped catalog. Both halves matter: a name equal to the flat
answer is weight, and a name from another brand is not a recovery, it
would put Prusament's "Pristine White" on every generic white PLA slot.
A slot with a spool assigned from Inventory is titled with that spool's
own colour name: it is the roll the user said is in there. Bambu
internal codes are still rejected as non-names (#857).
With a switch fitted, an AMS is not wired to a nozzle any more. It is
plumbed into one of the switch's two inlets and reaches both nozzles
through it, so every unit reports its extruder as "not fixed" (0xE) and
ams_extruder_map comes back empty on these machines.
The printer card had nothing to fall back on but the AMS unit number, so
AMS-A was badged R and AMS-B was badged L purely because their unit ids
are 0 and 1, a third unit got no badge at all, and every one of those
labels was wrong. The SpoolBuddy assign modal had the same fallback in a
worse form, mapping anything that was not extruder 1 to R.
The binding turned out to need no new telemetry. BambuStudio reads it out
of bits 24-27 of the same AMS info string we already parse for the AMS
type and the extruder id -- 0 is In-B, 1 is In-A -- and it is only
meaningful when a switch is installed, because without one 0xE really
does mean an uninitialised unit and those bits carry nothing. That gates
the read, which in turn forced the switch block to be parsed before the
AMS block: _handle_ams_data runs early in _process_message and
_update_state only much later, so the binding was lost on every frame
that carried both. _parse_fila_switch is split out and called first, and
left in _update_state as well so that stays a complete absorb step.
The badge keeps L and R rather than A and B, because the lettering is
familiar and matches the physical layout. It is a different colour from
the plain nozzle badge, and its tooltip names the inlet in full, since
the letter is the inlet's position and not a claim about which nozzle
that AMS feeds -- the switch can route either inlet to either outlet. An
AMS still reporting a real extruder id keeps its ordinary badge, which
BambuStudio also treats as authoritative over any switch binding, and a
switch that has been fitted but not yet set up on the printer shows
nothing rather than a guess.
The print dialog's slot dropdown gets the same label. It replaces a
left/right hint that never once rendered: ftsExtruderForSlot compared
snow-encoded in[] values against global tray ids and could not match.
Decoding it correctly would not have saved it -- the firmware reports
which slot sits in each inlet and which nozzle each outlet feeds, but
never which inlet is currently paired with which outlet, so no per-slot
nozzle can be derived. That function is gone rather than fixed.
The dialog also points out when every filament a print needs sits behind
one inlet. Bambu's own guidance is that this is legal but slow: a change
between two filaments on the same inlet retracts the outgoing spool all
the way back to its AMS before the next can be fed up the shared tube,
where a change across the two inlets only retracts as far as the switch.
All on one inlet means every change in the job takes the slow path, and
moving a single spool fixes it. So it advises, it does not block.
Both views update live. Two things were stopping that. fila_switch and
ams_switch_inlet were absent from printer_state_to_dict, and the frontend
shallow-merges each WebSocket push over its cached status, so a field the
push omits keeps whatever the last full fetch left behind. And the
broadcast dedup key had no term for either, so "Join IN-B" on the printer
screen moved nothing: the binding is not in the tray component of that
key, and it is not in the AMS change-hash either, which covers tray
fields only and must stay that way because it drives Spoolman sync.
Assigning an AMS to an inlet remains printer-side. BambuStudio can read
the binding and has no command to write it -- its switch class is parse
and getters only, and the recommended-arrangement popup draws and
publishes nothing -- so there is no wire format for us to copy.
Adding the two fields to PrinterState broke four test modules whose
SimpleNamespace stubs predate them. The stubs are fixed rather than the
production reads made defensive: the real dataclass always carries both,
and a getattr in the dedup key would silently stop tracking the field if
it were ever renamed.
Dragging a sliced file onto a printer card refused the drop unless the
printer was connected and neither RUNNING nor PAUSE. The overlay went red
with "Printer busy", handleCardDrop returned early, and the file was
discarded with no toast and nothing uploaded. The card's Print button was
hidden by the same condition, so both routes into "Print from Printer
Card" closed at once and the way through was the File Manager, uploading
and queueing by hand.
The gate never described a real constraint. Every print Bambuddy sends
becomes a queue item; dropping onto an idle printer only looks instant
because the scheduler dispatches it on the next pass. Busy is a timing
difference, not a different path. The modal has always passed
disableBusy={false} to PrinterSelector, and asapToastShouldPromiseLaterStart
exists precisely to say "this will start later" when the target cannot
take it now. cleanup_library_after_dispatch is a print_queue column
consumed at dispatch, not on close, so the transient upload survives
however long the item waits.
Offline is included for the same reason: the queue dispatches when the
printer comes back, so a machine that is powered down can be given work.
The overlay now says which one is happening -- "Drop to print" when the
job would start immediately, "Drop to queue" when it would wait, covering
a print in progress, a paused job, an AMS mid-cycle, a plate not yet
cleared, and a printer that is offline. The predicate behind that wording
is the one the modal already used for its own later-start notice, lifted
out of PrintModal into utils/printer as isPrinterCurrentlyDispatchable so
the card cannot promise something the modal contradicts a second later.
The drop is also gated on the permissions the flow actually exercises. It
uploads to the library and creates a queue item, so library:upload and
queue:create -- the pair the Print button beside it has always checked.
printers:control, which it checked before and never uses, meant someone
holding that alone got the file uploaded and then rejected by the queue,
leaving a library row behind with nothing pointing at it. The refusal now
names whichever of the two is missing instead of claiming the printer is
busy.
printers.cannotPrint is dropped in favour of printers.dropToQueue across
all 13 locales; its text was both unused and, after this, wrong.
The Print button stays inside the expanded-card block, so S-size cards
still show the drop zone and no button, exactly as before.
The Vortek rack holds six hotends, and a multi-colour plate is sliced to
use a different one per colour so it can skip the purge. Which of the six
each colour takes is not in the 3MF. The same plate, sliced and sent twice
from Bambu Studio with a different choice each time, produces two files
that differ only in rounding in the last digit of a few extrusion figures
-- the filament grouping, the toolchange stream, the 120 nozzle-change
markers and project_settings.config are all identical. The choice travels
only in the dispatched nozzle_mapping.
Bambuddy had no way to state it, so those plates went out with no nozzle
assignment at all and the printer chose for itself. That is what levelled
on one hotend and printed with another, millimetres above the plate.
Every rack-bound filament now carries a position picker beside its AMS
slot dropdown, listing all six with the nozzle each holds. An empty
position, or one holding the wrong diameter or flow type, is shown greyed
out with the reason rather than hidden, so someone looking for position 4
finds it. The choice is per filament *group* rather than per slot, because
a group is one hotend: two filaments the slicer grouped together share it
and cannot point at different positions.
Nothing has to be picked. Positions are assigned automatically, preferring
one already loaded with that colour, which on the plate this was built
against reproduces Bambu Studio's own pick exactly.
A nozzle currently picked up onto the carriage is offered too. The
firmware drops its rack position from the report entirely rather than
sending a placeholder (#943), and refusing it would rule out the position
most likely to be wanted -- the one the last print left mounted. Only
recoverable when exactly one position is missing; two gaps are genuinely
ambiguous and stay unavailable.
Positions are re-checked at dispatch, not just when queued, because the
rack can be re-loaded in between. The two failure modes differ on purpose:
an explicitly chosen position that no longer fits stops the print, names
what the position now holds, and deletes the uploaded file from the SD
card so it cannot be started by hand either -- an operator who named a
hotend must not silently get a different one. An automatic assignment that
cannot be made instead falls back to letting the firmware choose, which is
what happened before any of this existed.
The pick is stored as {group: position} rather than as the expanded
nozzle_mapping, though that is what goes on the wire. That column means
"Bambu Studio decided, forward verbatim", and only the group-and-position
form can be re-checked against what is actually mounted at dispatch.
The existing multi-rack refusal in extract_nozzle_mapping_from_3mf stays.
It still guards the #2800 fallback, which can only ever name one rack id.
Measured on the maintainer's H2C: rack position n is physical nozzle id
15 + n, confirmed by cross-referencing two captured dispatches against
Bambu Studio's own dialog. extruder_max_nozzle_count names which carriage
is the rack straight from the file, and is read rather than assumed -- a
fourth independent confirmation of the carriage indices fixed in 45dc139.
The print dialog is also wider, on every printer. Its filament rows carry
the most horizontal content in it and adding a picker truncated names to
"Bamb...". The column widths themselves only change on a rack machine.
Tests: 44 unit covering the plan, the resolver, the mounted-nozzle
recovery and every refusal; 9 dispatch integration asserting the two real
captures end to end; 7 API round-trip; 33 frontend. The API ones exist
because two integration bugs got through a green suite that tested the
pieces and not the seams -- the group data reached only one of the three
filament-requirements routes, and the field was declared on every schema
except the create one, where Pydantic dropped it in silence.
Three follow-ups to #2804, all bearing on one decision: which spool a print
uses when the exact colour is not loaded.
Colour ranking is now perceptual. The ranking added in #2804 measured RGB
distance, which rates a colour by how far apart the numbers are rather than
how far apart they look, and it overweights blue badly enough to invert the
answer: against a required #1E4821 green, a purple #38202F is the nearer of
two eligible spools by RGB and four times the further once measured properly.
Both sides now use CIEDE2000 -- perceptual_color_distance in
backend/app/utils/color_utils.py and colorDistance in amsHelpers.ts, kept
structurally identical so they can be read side by side. Verified against the
Sharma/Wu/Dalal published reference set, all 31 pairs to 1e-4, and the two
implementations agree to within 1e-9 across 800 sampled pairs. Eligibility is
untouched, still the per-channel RGB box, so this only reorders spools that
already qualified.
Type matching now agrees between the interface and the scheduler. Bambu
firmware treats PA-CF, PA12-CF and PAHT-CF as one material and the scheduler
has always matched them accordingly, but the interface compared raw type
strings and called that same pairing a mismatch. The badge contradicted what
the printer was about to do, and the manual override picker, which groups by
canonical type, offered the very spool the badge then rejected. The fifteen
comparison sites in useFilamentMapping.ts, useMultiPrinterFilamentMapping.ts
and PrinterSelector.tsx now call filamentTypesCompatible.
The pipeline pre-flight reads the matcher's table instead of its own copy.
That copy had drifted into disagreeing in both directions: it aliased PLA
Basic to PLA where the matcher never has, so a run could clear the check and
then fail to map its slots, and it lacked the nylon grouping, so it flagged
runs the matcher handles without complaint. A check whose job is to predict
dispatch is wrong whenever it disagrees with dispatch, whichever way it leans,
so it and the scheduler now both read backend/app/utils/filament_types.py.
That canonicaliser deliberately does not strip surrounding whitespace. It
looks like a free improvement, but it would collapse a junk tray_type to ""
just as a 3MF declaring no filament type yields "", and a typeless requirement
would start matching a junk-typed tray instead of reporting the slot unmapped.
Padded type strings are worth handling on their own terms, with that case
addressed.
One behaviour change outside the ranking: the pre-flight is stricter for a
printer reporting a product name such as "PLA Basic" where the generic
material belongs, which it now flags rather than passes. Rare in practice,
since the printer reports material and product name in separate fields, and it
is the answer the matcher would give. Nothing about which spool a print
actually uses changed outside the colour ranking itself.
Adds 203 backend and 6 frontend tests. The #2804 tie-break test now uses
identical colours: two colours at equal RGB distance are not perceptually
tied, which is rather the point.
The dialog weighed each plate against the spool in the slot it mapped to
and knew nothing about AMS Filament Backup, so a two-plate job needing
1441 g of ABS was refused against a 1000 g spool while the identical full
spool in the next slot went uncounted. The dispatcher has pooled matching
spools since #1762 and would have run the print -- "Print anyway" was
always the right answer to this warning.
The rule for which spools back each other up now lives in one place:
build_slot_materials() in filament_deficit, which the dispatcher's pool
and the new slot_materials half of GET /printers/{id}/inventory-remain
both draw on. The dialog groups on the keys it is handed rather than
resolving spools a second time, which is what let the two answers drift
apart, and which also gives the check to Spoolman users -- it read the
internal inventory only, so in Spoolman mode it approved everything.
Where a pool really is short the warning quotes the pooled totals, since
the per-slot figure reads as a contradiction next to a full peer spool.
Printing a multi-plate file in different quantities per plate meant
queueing each plate separately and tracking the counts by hand: one
shared Quantity field cannot say "plate 1 once, plate 2 twice, plate 3
three times". Each selected plate now carries its own quantity, and the
submission becomes an order on a new Batches tab.
The point is the distinction the old flat batch could not express.
print_batch_plates stores how many runs of each plate were wanted,
separately from what was queued, so a run that fails, is cancelled or is
skipped does not satisfy a target -- the order goes on saying it owes a
print instead of quietly under-delivering. Queue remaining re-queues
exactly what is missing, for the whole order or one plate, by cloning
the most recent item for that plate: that inherits the printer or model
target, AMS mapping, filament overrides and print options along with the
validation they already passed, rather than re-serialising twenty fields
through a template that would drift from the model the first time
someone adds a column. Clones append to the end of the relevant
printer's queue and take the same advisory lock the add-to-queue route
does; positions are per-printer sequences, not global.
Cost is measured, not estimated. print_log_entries gains queue_item_id,
set where the queue item is already in scope, so each run's material and
energy are attributed through the item that produced them -- an
unrelated reprint of the same archive never lands in an order's total,
and a multi-plate order gets each plate's own cost rather than the whole
file's via the plate-scoped estimate from #2614. Before any run has
completed there is no honest figure, so cost reads as unknown instead of
a fabricated 0.00.
The Batches tab wires up GET /queue/batches, which has been unreferenced
since the batch MVP shipped, along with six locale keys that were
translated and never used. It is a separate tab because an order
outlives the queue that produced it: once its runs finish they leave the
active queue, so Queue and History each hold half the picture.
completed was not a reachable status before now, so every batch created
since April is still marked active however long ago its last print
finished -- 73 of them on the development install. A startup pass closes
out the finished ones: those whose runs all completed become completed,
and groupings whose items were all cancelled become cancelled, which is
what they are. Not applied to orders, which state their intent
independently of their runs and still owe the work. Only batches with
nothing queued or printing are considered, and repeating the pass also
catches an order whose last run landed while the process was down.
Batches with neither items nor targets are no longer listed at all --
empty shells left when a grouping's items went with their source
archive.
Dispatch applies the same source-file gates as POST /queue/. It creates
queue items, so without them it would be a weaker door to the same
outcome; the archive and library-file checks move into shared helpers
so a third route cannot drift from them.
The edit dialog offered a printer picker and target-model dropdown for
an item with alternatives. Saving left a row with variants AND a
printer_id, and the scheduler's fixed-printer branch wins that race, so
it dispatched a row whose library_file_id is still null and failed in
the upload. PATCH now refuses printer/model changes on such an item —
comparing against the current value, since the dialog re-sends
target_model unchanged — and the route eager-loads variants, without
which the guard could not see them and every PATCH response dropped the
alternatives from its payload.
Names come from a shared helper now. A cross-model item holds neither
archive_id nor library_file_id until dispatch, so five separate inlined
fallbacks all rendered "File #null"; they now read "x1c.gcode.3mf +1
more".
The queue also grouped these under "Any H2D" — the first candidate
mirrored onto the row — filing a job under a printer it might never run
on. It groups as "Any H2D / X1C", matching the row beneath it.
Selecting several sliced files and pressing Print now creates one queue
item carrying all of them, instead of hiding the Print button the moment
a second file is selected. The printer picker is replaced by the ordered
candidate list, since choosing these files is already the answer to
"which printer" and the only question left is which is preferred.
Per-candidate configuration is the plate only. Model-based assignment
sends no AMS mapping — the printer is unknown until dispatch, where the
scheduler derives it — so a per-candidate mapping editor would collect
choices it then discards. Filament overrides stay shared: "this job
needs PETG" holds for every slice of the same job.
Adds Group as versions for durable grouping, a versions badge counting
the whole group rather than the rows on screen, and a queue card label
naming every model a pending item is waiting on.
Every field that takes a chamber target stopped at 60: the per-filament
chamber map and per-print override in Preheat & Heat Soak, the chamber
quick-select presets, and the printer-card chamber control. 60 is the
X1E's ceiling and the X1E was the only heated-chamber model when that
limit was written; the H2 series and X2D heat to 65, so the top of their
range was unreachable.
The ceiling now lives in one constant per side (MAX_CHAMBER_TEMP_C in
backend/app/utils/printer_models.py and frontend/src/utils/printer.ts)
rather than as a literal at each call site. X1E firmware clamps a higher
request to its own maximum, so a shared ceiling is safe.
Also fixes a live bug at PrintersPage.tsx:7985: parsePresetTriple was
bounded to 60 there, and it rejects the whole triple on any out-of-range
entry, so a saved 65 preset would have silently reverted the printer
card to the defaults while Settings still showed 65.
Round-3 review of the "Save AMS mapping" PR.
The queue item's ams_mapping was set unconditionally, on the reasoning that
honouring the slicer's own pick is a correctness fix rather than a feature.
It is both. Storing a resolved mapping makes _ensure_ams_mapping return
early, so _compute_ams_mapping_for_printer never runs — and that function is
where prefer_lowest_filament lives, along with the AMS-filament-backup gate
that qualifies it (#1766), the inventory-remain overrides, and the per-slot
force-colour overrides. Every existing queue-mode VP pointed at a printer
would have quietly lost all of it on upgrade, without a setting to turn it
back on.
So save_ams_mapping now gates the queue item too, not just the archive
persistence. Off is exactly the old behaviour. The correctness case the PR
was written for — two spools of the same red PLA, and the slot the user
picked in the slicer thrown away — is still fixed, for anyone who asks for
it.
Force color match wins over it when both are on. Its only effect on a
fixed-printer item is the filament_overrides written onto the queue item,
and those are read inside the function a stored mapping skips, so the two
toggles sitting next to each other on the same card silently cancelled. The
dispatch now matches strictly, as asked, while the slicer's pick is still
saved onto the archive — that is what the toggle's name promises, and a
later reprint is a separate decision from this print. The queue-add fallback
applies the same rule to a request that carries force-colour overrides.
A mapping shorter than a plate's highest slot id cannot address that plate's
own slots, and _ensure_ams_mapping would have kept it anyway, since it only
rejects an all-unresolved one. Each plate now checks the length it needs and
falls back to a computed mapping if the array does not reach. Bambu Studio
sends a file-global array, so this normally never fires; it also means a
multi-plate Send All degrades safely if that ever stops being true.
The badges claimed more than they delivered. Both rendered whenever a saved
mapping existed, ignoring which printer it belonged to, while the tooltips
promised the reprint would reuse those exact spools — true only on the
printer the trays were resolved against. The queue row's flag is now
computed against that row's own printer, which is precisely when dispatch
reuses the mapping, and the archive card names the printer instead of
implying any of them will do. It hides itself when that printer no longer
exists. Retranslated in all 13 locales.
Frontend tests, which the PR had none of. The printer-scoping rule is now a
pure function rather than an inline expression, covered for the mismatched
printer, the no-printer-selected case that would otherwise compare undefined
against undefined, and malformed extra_data. The toggle's undo bookkeeping
is covered for unresolved slots, short mappings, and hand-made picks —
preserved when the toggle never wrote that slot, replaced when it did, which
is behaviour worth pinning either way.
Also reverts all three queue-mode switches when a save fails, not just the
new one; without it the card shows a setting the server rejected.
Round-2 review fixes for #2700.
Blocking: the toggle didn't actually gate the archive write. archive.py's
promotion fired for any print_data carrying ams_mapping, but bambu_mqtt's
request-topic interception captures ams_mapping unconditionally for every
print source (slicer-direct LAN prints included). Since main.py's
real-printer auto-archive path forwards the full MQTT payload as
print_data, every archive on any install — VP or not — grew
extra_data.slicer_ams_mapping. Fixed by replacing the print_data-sniffing
with an explicit `slicer_ams_mapping` param on archive_print() that only
the VP-queue path (already gated on save_ams_mapping) ever passes.
Blocking: a saved mapping could get reused on a printer it was never
resolved against — tray IDs only mean something relative to one printer's
AMS layout. extra_data.slicer_ams_mapping is now stored as
{mapping, printer_id} instead of a bare array:
- add_to_queue's fallback only fires when the reprint's target printer_id
matches the mapping's origin printer.
- The frontend's archiveAmsMapping only surfaces (and the Mapping button
only appears) when the print modal's selected printer matches too.
- A model-based VP (target_printer_id=None, no MQTT bridge to any real
printer) never stamps a mapping in the first place — there's no live AMS
layout for the slicer to have resolved tray IDs against.
Also from review:
- Multi-plate archives now get the Mapping button too (the per-plate
FilamentMapping loop was missing archiveAmsMapping entirely).
- Added coverage for the previously-untested late-MQTT archive patch path
(_restamp_recent_queue_item), including the model-based-VP skip case.
- usingArchiveMapping now also resets on printer change, not just
plate/archive (it already worked via the printer-scoping above, but is
now an explicit dependency too).
- The Mapping button's revert (OFF) now undoes only the slots it itself
set, not every manual pick in scope — matches the comment above it.
- Added a comment on why negative-value slots (external spool) are
skipped rather than cleared when applying a saved mapping.
Lets a reprint reuse the AMS slot the slicer itself picked, instead of
re-deriving one from the file's static type/color.
When a Print Queue VP has "Save AMS mapping" on, the slicer's own
live-resolved ams_mapping (from the project_file MQTT command) is
persisted onto the archive as extra_data.slicer_ams_mapping. A later
reprint can reuse it via a new "Mapping" button in the filament-mapping
panel — one click snaps every slot to the saved pick, click again
reverts to auto-match. Archive cards and queue rows get an "AMS mapping
saved" badge so it's visible beforehand. add_to_queue also falls back
to the saved mapping automatically when the caller sends no explicit
ams_mapping (e.g. a plain reprint with no per-slot edits).
The queue item's own ams_mapping (used for that dispatch) is still
captured unconditionally whenever the slicer provides it — that part is
a correctness fix, not gated behind the toggle. Only the archive
persistence for future reprints is opt-in.
Split out from the original combined PR per review: this half is
genuinely opt-in and low-risk (#2684). The dispatch-time validation
gate that keeps a stored mapping honest (#1308) changes behaviour for
every existing user and will land as its own PR.
Review fixes applied:
- _extract_slicer_ams_mapping_json: dropped the unreachable `v is None`
arm and rejected bool explicitly (isinstance(v, int) accepts bool).
- Translated the Russian docstring text to English.
- save_ams_mapping's model comment moved to a trailing comment on the
column line, matching the file's convention.
- usingArchiveMapping now resets when the plate or archive changes, so
the Mapping button can't read ON against a mapping it never applied.
- Translated "Click to change slot assignment" and "Re-read".
- add_to_queue's fallback is now called out explicitly in code comments
and covered by three new integration tests (fallback fires, explicit
mapping wins, unrelated extra_data doesn't false-trigger).
Closes#2684
In the Print dialog's Filament Mapping, each required filament shows its
name and the grams the job needs, e.g. "Bambu PLA Basic (281.2g)". Name and
grams shared one fixed-width column with truncate on the whole string, so a
long name pushed the "(...g)" off the end and clipped it -- partially on a
wide screen, entirely in mobile portrait. The gram usage is the number that
matters (does the spool have enough left?), so it shouldn't be the part that
gets dropped.
Pin the gram usage (shrink-0, whitespace-nowrap) and let only the name
truncate, with the full name on hover. Applied to both the Specific-Printer
(FilamentMapping) and Any-model (PrinterSelector) panels. Layout only.
Bed levelling, flow calibration, and nozzle-offset calibration were on/off
only, so the sole way to run bed levelling was to force a full level before
every print. Bambu Studio has always offered a third "Auto" state that lets
the printer skip the calibration when it was done recently -- the state most
users actually want. Make these three options tri-state (off/on/auto),
defaulting to auto, and leave vibration/layer-inspect/timelapse as on/off
(Bambu Studio exposes no auto for those).
Wire encoding follows Bambu Studio's source exactly: each option sends a JSON
bool (true only for "on") plus a companion int -- off=0, on=1, auto=2. The
bool fields stay booleans (the #1478 H2S regression); only the companion int
widened from {0,1} to {0,1,2}. #1721's observation that stage 8/39 stays
queued when sending 2 is the auto contract (queued, skipped at runtime if
recent), not a broken "off".
- schemas: TriState = Literal[off/on/auto] with a BeforeValidator coercing
legacy bool / 0-1 / true-false so old clients and un-migrated rows validate
- model + migration: boolean columns -> String; SQLite via column affinity +
data backfill, PostgreSQL via ALTER COLUMN TYPE guarded on information_schema
(verified on both dialects); settings rows normalised true/false -> on/off
- MQTT: start_print takes the tri-state strings and emits the paired bool+int
- Virtual Printer: reconstructs the slicer's auto/on/off from the int companion
(auto_bed_leveling / extrude_cali_flag) in both capture paths
- frontend: CalibrationMode type; off/auto/on segmented controls in the print
dialog, queue bulk-edit, and Settings -> Workflow; calibrationMode_* strings
in all 11 locales
A P1S queue row with use_ams=true but ams_mapping=[-1] was silently
printed with no AMS, starting against the empty external feed and pausing
with a runout. Two faults combined:
- start_print treated -1 (unresolved) the same as >=254 (explicit
external) when deciding to force use_ams=False. Only genuine external
now downgrades; -1 never does.
- The scheduler trusted a stored [-1] as "already resolved" and passed it
through. It now recomputes from live AMS trays whenever the stored
mapping is entirely unresolved, and clears it if nothing matches rather
than sending a doomed command.
Frontend: the Print dialog no longer serializes an all-[-1] mapping while
the printer status is still loading (the hook returns no mapping), and
submit waits for AMS status with a "Waiting for AMS status" notice.
Tests: new backend + frontend regression coverage; corrected one existing
test that pinned the old [-1] -> use_ams=False behavior.
A queue item's "Any <model>" button labeled itself from the file's slice
metadata while the scheduler used the row's target_model, so an X1C-sliced
item targeting H2D showed "Any X1C" above "assign to first idle H2D". The
mismatch itself was created silently: sliced-for metadata loads async, and
switching to model mode before it arrived pre-selected the alphabetically
first model (H2D on a mixed farm), after which the model dropdown hid
itself. Nothing validated compatibility, so the scheduler would hand X1C
G-code to an H2D.
Frontend: never default the target silently, keep the dropdown visible in
model mode (incompatible models disabled), label from the actual target,
warn on mismatch, block submit when incompatible.
Backend: new GCODE_COMPAT_FAMILIES table (X1/X1C/X1E/P1P/P1S interchange;
everything else exact-match; missing metadata never blocks). Queue create
and update reject incompatible targets with 400; the scheduler holds back
pre-existing mismatched rows with an actionable waiting_reason instead of
dispatching them.
queueing plates we cannot map (#2552)
The override panel disappeared for a multi-plate selection in Any [model]
mode, but only once the dialog had been opened before -- which the reporter
saw as "after the file was queued or printed". The filament requirements are
keyed on the selected plate, which is null as soon as two plates are ticked.
On a cold cache the modal cannot yet tell the file is multi-plate and fetches
the whole file's requirements for one render; the panel rendered from that
union. On a warm cache it knows from the first render, the whole-file fetch
never runs, and the panel had nothing to render. Visibility was decided by a
cache race, and the "working" case listed filaments from plates the user had
not selected.
Model mode now renders one panel per selected plate from that plate's own
requirements, and each queued plate carries only the overrides for the slots
it prints, so a colour forced on one plate no longer blocks another.
Reviewing the per-plate machinery turned up four more holes, all closed here:
a manual tray pick survived a change of printer, and a global tray id names a
different spool on a different machine; a plate whose filaments could not be
read was indistinguishable from one needing none and was queued with neither
mapping nor forced colours, so Print now waits for every selected plate to
answer and names the one it cannot read; the insufficient-filament check still
weighed the whole file against a mapping the plates no longer use, and now
follows what each plate dispatches, summing demand per tray; and the
per-printer tray editor no longer appears for a multi-plate fan-out, where its
choices were collected and then discarded.
Selecting several plates hid the filament mapping panel but did not stop the
modal sending a mapping. With no single plate selected it fell back to the
whole file's filament list -- the union of every plate -- and matched against
that. Tray assignment is stateful, so where plate 1 prints red on slot 1 and
plate 2 prints red on slot 2, slot 1 claimed the only red spool and slot 2 fell
through to a type-only match on black. That one mapping went out with every
plate, and the scheduler uses a stored mapping verbatim, so plate 2 printed in
the wrong colour -- decided by a panel the user never saw.
Fetch each selected plate's requirements and map them separately: one panel per
plate, named after it, with its own tray overrides, and each queue item carries
its own plate's mapping. A fan-out across several printers would be a panel per
plate per printer, so those items carry no mapping and the scheduler maps each
plate against the printer it picks. Model mode is unchanged -- no printer means
no trays to map onto.
The tray matcher existed twice and this needed a third caller, so extract it
once and have both existing paths delegate; its 62 tests pass unchanged.
The bug only reproduces with a realistic query cache -- the shared test harness
sets gcTime: 0, which evicts the union and makes the modal look innocent -- so
the new modal tests bring their own client.
The app was built dark-first, so hundreds of hardcoded Tailwind semantic
text/icon utilities at light shades (text-amber-400, text-blue-300, ...) had
no dark: variant. With darkMode:'class' they applied in light theme too,
producing washed-out text on pale tints and white cards — including the three
reported spots (AMS Drying banner, Archives no-3MF warning, debug-logging
banner). Give each a theme-aware pair: a darker readable shade in light theme
with the original pinned to dark:, so dark theme is unchanged. ~100 files.
The bambu-* CSS-variable palette (self-correcting) and the dark-only SpoolBuddy
kiosk are left untouched. Plain text-white is already theme-aware via the
existing index.css .text-white override, so it needed no changes.
Editing a queue item that was created with "Any of model X" left the
printer selection area completely blank — the assignmentMode was
initialised to 'model' from queueItem.target_model, but the three
model-mode props (onAssignmentModeChange, onTargetModelChange,
onTargetLocationChange) were gated behind !isEditing. That flipped
modelAssignmentAvailable to false in PrinterSelector and hid the mode
toggle, the model dropdown, AND the location filter; combined with the
assignmentMode === 'printer' gate on the printer list, the whole
selector rendered empty.
Users hit this whenever they queued something to "Any of model X" and
then wanted to change the target model / location — the only workaround
was delete + re-queue.
Fix: drop the !isEditing gate on all three PrinterSelector props. The
submit path already handles both flavours (target_model+target_location
with printer_id=null vs. printer_id with the target fields nulled), so
un-gating the UI just surfaces the machinery that was already there.
Edit is still only offered on pending items, so the mode-flip can't race
an in-flight dispatch.
PrintModal carried a useEffect that reset scheduleOptions.gcodeInjection
to false whenever mode === 'create' AND effectiveQuantity <= 1. The
comment claimed the checkbox only renders for quantity > 1, but the
actual render gate in ScheduleOptions is just hasGcodeSnippets — no
quantity check. So with snippets configured + quantity = 1 (the OP
scenario): user clicks the checkbox, React updates state to true,
the parent's useEffect immediately sees effectiveQuantity <= 1 and
resets to false, and the checkbox appears un-clickable. Edit-queue-
item mode worked because mode !== 'create' short-circuited the reset.
Drop the effectiveQuantity <= 1 clause from the reset. Keep the
!settings?.gcode_snippets half as the legitimate cleanup for the
"admin removes all snippets while modal is open" case. The scheduler
reads item.gcode_injection per queue item regardless of batch size,
so single prints can inject too.
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
Settings:
- Introduced billing enabled toggle with printer kill switch functionality in the settings.
- Added finance monthly budget reset day and timezone settings.
Other:
- Added cost center fields to PrintModal (if enabled)
- Switched sequence in PrintModal (cost center after estimated cost, and before print options)
- Implemented Finance Page
Reported off-list by a corporate supporter running a multi-operator
farm shift. Backend already rejects double-sends with HTTP 409 (see
background_dispatch._dispatch at lines 283-290), so no double-print
was possible, but PrinterSelector consulted only PrinterStatus.state
({IDLE, FINISH, FAILED}) to decide whether a printer was selectable.
PRINT_START is the only signal that flips the printer out of IDLE, so
during the upload + print-command + firmware-ack window the card
stayed clickable and operators only found out after submitting.
New useDispatchedPrinterIds hook subscribes to the existing
background-dispatch WebSocket event (already consumed for the toast
overlay), collects printer_ids from dispatched_jobs + active_jobs,
and exposes them via useSyncExternalStore so every PrinterSelector
instance shares one snapshot. OR'd into isPrinterBusy; badge label
flips to "Dispatching..." instead of a misleading "Idle".
No backend change — the reservation already exists, the UI just
didn't reflect it. No behaviour change for add-to-queue / edit-queue
modes (disableBusy stays false for those).
Two tightly-coupled deliverables in one drop -- a new AMS Filament Backup
status/control surface, and the #1766 fix that depends on it.
Added -- AMS Filament Backup status + control
- Parse bit 18 of top-level print.cfg into PrinterState.ams_filament_backup
on every push_status. Verified against OrcaSlicer source
(DeviceManager.cpp:4961) and a live H2D ON/OFF capture. Tri-state
(None = A1 family / pre-cfg push) preserves today's behaviour.
- Hold-timer guard (3 s) prevents stale frames from flickering the badge
back to the printer's old cfg after a user-initiated toggle.
- POST /printers/{id}/ams-backup toggle, set_ams_filament_backup() client
method calling _set_print_option("auto_switch_filament", enabled).
- GET /printers/{id}/inventory-remain endpoint exposes the same map the
dispatcher uses (internal and Spoolman modes both work uniformly).
- Small icon badge in the printer card's "Filaments" section header
(placement reads as printer-wide because the cfg bit is printer-wide,
not per-AMS). Click to toggle, success toast.
- 5 i18n keys x 11 locales for the badge UI.
Fixed -- #1766: prefer_lowest didn't pick lowest, ignored backup state
- Backend gate in _compute_ams_mapping_for_printer: coerce prefer_lowest
to False when status.ams_filament_backup is False; log the skip.
- New effectivePreferLowest(setting, backup) helper applied at every
frontend sort entry point: single-printer PrintModal, multi-printer
hook per-printer, PrinterSelector InlineMappingEditor, FilamentMapping
standalone editor (the last had NO preferLowest awareness at all
before this change).
- New preferLowestSortKey(f, inventoryByTrayId) mirrors backend's two-tier
key exactly, including the banding tie-break (regular AMS < AMS-HT <
external) so the client-side pre-compute matches the dispatch-time pick.
An earlier draft used a flat `amsId * 4 + trayId` priority which gave
external slots (ams_id = -1) a NEGATIVE priority -- caught in code
review before commit.
- Settings -> Filament -> "Prefer lowest remaining filament" gets an
explanatory note about the printer-side AMS Backup dependency, with
i18n key in all 11 locales.
Restructures the queue page around three tabs (Queue / History / Timeline)
and adds first-class batch grouping plus a real time-based timeline.
Queue tab
- Layout toggle: Sort by Position (flat list) or Group by Printer (per-
printer section cards with aggregate count / time / weight headers).
- Batch grouping: pending items sharing a batch_id render as a single
collapsible row with aggregate stats; children draggable within the
batch only. Per-batch collapse state in localStorage.
- Multi-drag: dragging any selected row moves all selected items as a
contiguous block via DragOverlay (+N ghost).
- Selection bar gains a Group as batch action when 2+ ungrouped items
are selected. Ungroup lives on the batch parent row.
History tab
- Two-line rich rows: filament color swatch + weight + type, user
attribution, inline error message on failed / skipped rows.
- Responsive 1 / 2 / 3 column grid so a long history uses available
width instead of stretching one row per line.
- Batch siblings group into a collapsible parent with status-rollup
chips (3 OK / 1 failed / etc).
- Thumbnail hover preview shows the full image at 192x192 next to the
small thumb.
Timeline tab
- Replaces the hourly-list view with a Gantt swimlane: one row per
printer (plus per target_model and unassigned), horizontal hour
axis, jobs as bars positioned by start time and sized by duration.
- Live NOW marker.
- Only committed schedules are rendered: currently printing items,
pending items with scheduled_time, and pending ASAP behind an active
print. Staged (manual_start), waiting (waiting_reason), and ASAP
jobs on idle printers are filtered out.
- 24h rolling window with 12h step controls.
- Per-bar tooltip with start, end, progress, batch name.
Backend
- POST /queue/batches creates a batch, optionally assigning existing
pending item_ids (manual grouping) or returning an empty batch the
client can attach to subsequent /queue/ POSTs.
- POST /queue/batches/{id}/ungroup clears batch_id from all members
(skipping items the caller does not own) and deletes the batch row
when no members remain.
- POST /queue/ accepts an optional batch_id and validates that the
batch exists, is active, and the caller may modify it. The existing
quantity > 1 auto-batch path still fires when no batch_id is sent.
PrintModal
- When N plates from one source are queued in a single submission
(model assignment or single printer), the modal pre-creates a batch
and passes its id to each addToQueue call so multi-plate jobs land
grouped automatically. Falls back to ungrouped items if the batch
pre-create fails.
Before this change, the Re-print and Schedule modals' per-filament
slot dropdown hid every slot whose extruder didn't match the filament's
slicer-assigned nozzle. On H2D with AMS A+C on the left and B on the
right, an L-assigned filament could only pick A or C and an R-assigned
one could only pick B — locking the user out of cross-extruder picks
even when they'd intentionally loaded the required filament into the
other AMS.
The slicer wasn't the source of the asymmetry: BambuStudio Desktop,
OrcaSlicer Desktop, and the Bambuddy sidecar all produced identical
filament_map values for the same source 3MF. Bambuddy's UI filter was.
Drop the f.extruderId === item.nozzle_id clause in FilamentMapping's
loadedFilaments filter. Single-nozzle and FTS short-circuits stay; the
L/R row badge stays as a hint to the slicer's intent. Printer firmware
decides at start-print whether the cross-extruder ams_mapping is valid.
Round 2 fixed the model-mode FilamentOverride: tray_info_idx →
sub-brand, plus a material-disambiguated colour name from a new
/inventory/colors/by-material endpoint. The printer-mode panel that
renders the same 3MF (FilamentMapping) was reading the same raw
fields — item.type for the required label, getColorName(item.color)
for the swatch tooltip — and was not touched, so picking "Specific
Printer" still showed "Required: PLA - Black" for a slice the
"Any H2D" branch already labelled "Bambu PLA Matte - Charcoal".
Extract the three-query resolution machinery from FilamentOverride
into a shared hook useFilamentLabels (returns positional
{resolvedName, colorLabel} per slot). Both panels call it; both
read the same labels. The hook also owns extractMaterialHint so the
"strip leading brand token" rule has one source of truth.
FilamentMapping required-side now reads {resolvedName} instead of
{item.type}; swatch tooltip reads `Required: {resolvedName} -
{colorLabel}` instead of `Required: {item.type} -
getColorName(item.color)`.
The Print Queue's schedule dialog hid the per-slot "Force color match"
checkbox when a specific printer was picked, even though the scheduler
in print_scheduler.py:535 honours force_color_match regardless of how
the queue item was created. Model-mode ("Any A1") rendered
FilamentOverride which carries the checkbox; printer-mode rendered
FilamentMapping which had no force-match UI at all. Pure UI gap.
Extend FilamentMapping to accept optional forceColorMatch +
onForceColorMatchChange props, mirroring FilamentOverride's signature,
and render the same <Palette>-iconed checkbox under each filament row
when a handler is wired. PrintModal/index.tsx passes the existing
forceColorMatch state through — same object both modes write into so
toggling between modes preserves the user's selection. No new i18n
keys (printModal.forceColorMatch already ships in all 11 locales).
When the user clicked Print Anyway on a filament-deficit warning, the
acknowledgement was one-shot. The route cleared manual_start and
filament_short, then the next scheduler tick re-ran
compute_deficit_for_queue_item against identical spool state, found
the same deficit, and re-set both flags. The item bounced between
"user said anyway" and "scheduler re-blocked" — every Play click
returned 409, every confirm got rolled back on the next tick.
Add a persistent acknowledgement flag on the queue item:
- New column `skip_filament_check` on print_queue. SQLite + Postgres
migration branched on is_sqlite() so Postgres doesn't reject
DEFAULT 0 on BOOLEAN.
- PrintQueueItemCreate + PrintQueueItemResponse schemas + the
TypeScript types carry the field.
- POST /print-queue/{id}/start with skip_filament_check=true now
ALSO sets item.skip_filament_check = True (not just clearing
manual_start / filament_short).
- PrintScheduler._block_on_filament_deficit short-circuits to
False — no compute, no flag-setting, no notification — when
item.skip_filament_check is True. We trust the operator's
decision and stop fighting them.
- PrintModal at queue-creation time threads
skip_filament_check=true into the create payload when the user
clicks Print Anyway on the frontend deficit warning, so a print
that was warned-then-acknowledged at add-to-queue time goes in
pre-acknowledged — scheduler never blocks it on first tick.
Flag is not auto-cleared on spool swap by design: if remaining is
now sufficient, the check returns no deficit anyway, so the flag
is moot. Auto-clearing would add lifecycle complexity without
changing behaviour.
AMS Backup awareness (the other half of the discussion) intentionally
NOT included — verified the H2D's bit-26 of print.cfg toggles with
the printer-side AMS Backup setting, but the X1C's cfg has a
different shape entirely and verifying every model family isn't
realistic. Silently under-warning would be worse than always
per-slot. The check stays single-slot for now.
Reporter on a multi-printer farm with 40+-plate runs needed to walk to
the printer with the right physical plate, but the queue and the
scheduling modal didn't surface curr_bed_type the way the archive card
already did.
New utils/threemf_tools.extract_bed_type_from_3mf helper (per-plate) so
both the queue API and the /plates endpoint can return per-plate values.
PrintQueueItemResponse.bed_type populated from archive.bed_type /
library_file.file_metadata['bed_type'] as the default, then overridden
per-plate via the helper when item.plate_id is set. /archives/{id}/plates
(and library equivalent) include bed_type in each plate object.
Per-plate accuracy matters because archive.bed_type is captured at
ingest as only the first plate's value (services/archive.py:235) -
a 40-plate 3MF mixing PEI + Engineering returns PEI at the archive
level for every plate. The helper re-reads the 3MF and returns the
truth.
Frontend: queue card meta row + PlateSelector per-plate row + PrintModal
header all render bed icon + canonical label via the existing
getBedTypeInfo() helper, same as the archive card.
Bambuddy's project_file MQTT payload hardcoded "nozzle_offset_cali": 2 (skip),
giving users on H2D / H2D Pro / H2C / X2D no way to control the same toggle
BambuStudio exposes. Critical for diamond-nozzle setups that must keep the
calibration off.
start_print() now takes a nozzle_offset_cali kwarg; the value is encoded as
1 (run) or 2 (skip) and gated on is_dual_nozzle so single-nozzle machines
always send 2 even if a stale flag arrives. The kwarg threads through
printer_manager, both background_dispatch sites, and print_scheduler so
every dispatch path respects the per-item setting.
print_queue gains a nozzle_offset_cali column (DEFAULT TRUE, is_sqlite()
branch for Postgres BOOLEAN). Settings default key default_nozzle_offset_cali
defaults to TRUE to match BambuStudio. Schemas updated across print_queue,
library FilePrintRequest, archive ReprintRequest, settings.
PrintModal renders the new toggle only when the selected printer is dual-
nozzle (printer-mode: nozzle_count===2; model-mode: DUAL_NOZZLE_MODELS).
SettingsPage default-print-options row + QueuePage bulk-edit tri-state both
hide unless any registered printer is dual-nozzle. Labels reuse the existing
settings.default* keys so the only new i18n strings are
settings.defaultNozzleOffsetCali / Desc and queue.bulkEdit.nozzleOffsetCali
- real translations in all 11 locales.
The FTS routes any AMS slot to either extruder, so AMS info reports
bits 8-11 = 0xE (uninitialized) and ams_extruder_map ends up empty.
The print modal's per-nozzle dropdown filter then hides every loaded
slot, leaving the user with an empty filament dropdown.
Detection: parse print.device.fila_switch from MQTT push_status into a
new FilaSwitchState dataclass on PrinterState; surface it through the
GET /printers/{id}/status response as a nullable FilaSwitchResponse.
Frontend: useFilamentMapping and FilamentMapping skip the per-extruder
filter when fila_switch.installed is true. Slots currently fed into a
track display an [L]/[R] routing badge in the dropdown so the user
can see where the FTS is currently routing them.
Tests: 4 backend unit (TestFilamentTrackSwitchDetection), 2 backend
integration (status route), 2 hook regression, 2 component regression.
The "Print" button on a printer card (and drag-drop-onto-card) used
FileUploadModal to persist the file as a LibraryFile, then dispatched
through POST /library/files/{id}/print. The LibraryFile row + disk file
were left behind after every one-off print, polluting File Manager with
entries the user never asked to save.
FilePrintRequest.cleanup_library_after_dispatch (default False) opts
into post-dispatch cleanup. When set, _run_print_library_file stages
db.delete(lib_file) in the same transaction as archive_print so a
mid-flight FTP / start_print failure rolls both back cleanly, commits
together, then unlinks the library disk file + thumbnail after commit
succeeds. External library files (is_external=True) are never touched.
Only the Printers-page Direct-Print PrintModal sets the flag. Every
other api.printLibraryFile caller (File Manager Print, Project Detail
Print) leaves it unset — their entries are there by user intent.
Also moves formatPrintName out of PrintersPage.tsx into a new
utils/printName.ts module — fa1c46d9 (#881) exported it inline so its
test could import it, tripping react-refresh/only-export-components.
* feat: print files directly from project view (closes#930)
Show printable files from linked library folders directly in the project
detail page, with Print Now and Add to Queue buttons per file. Removes
the detour through the File Manager for common reprint workflows.
Per-model start/end G-code snippets configurable in Settings (Workflow
tab). Queue items get "Inject G-code" toggle — scheduler injects
snippets into a temp 3MF copy before FTP upload. Supports Farmloop,
SwapMod, AutoClear, Printflow 3D and similar bed-clearing systems.
Original files are never modified.
When multiple AMS spools match the same type/color criteria, an optional
setting now prefers the spool with the lowest remaining filament. This
helps consume partial spools before starting new ones. Sorting applies
to all matching paths: queue scheduler, print modal, and multi-printer
mapping. Unknown remain values (-1) sort to end.
Stagger option now available when printing directly to multiple printers,
not just in queue mode. Prints are automatically queued with staggered
start times using group size/interval from Settings. New "Require
plate-clear confirmation" setting lets farm users disable per-printer
plate confirmations so queued prints start automatically on finished
printers.
Also fixes settings API type parsing for require_plate_clear (boolean),
stagger_group_size and stagger_interval_minutes (integer) — without this,
saved values returned as strings would cause the settings toggle to
always show enabled and trigger a permanent save loop.
maziggy