After sending a print command via MQTT, monitor whether the printer's
gcode_state changes within 15 seconds. If not, log a warning visible in
support packages. Addresses silent command drops observed on P1S firmware
01.09.01.00 where the printer ignores project_file commands while
continuing to send status updates.
Add a speed control badge to the printer monitoring card controls row
that lets users switch between Silent (50%), Standard (100%), Sport
(124%), and Ludicrous (166%) presets during active prints. The badge
displays a gauge icon with the current speed percentage, always visible
but disabled when idle. Includes backend endpoint, optimistic UI
updates, i18n for all 7 locales, and full test coverage.
Ntfy notifications with camera snapshots failed when the printer name
or filename contained non-ASCII characters. httpx enforces ASCII
encoding on string header values, but the Title and Message headers
can contain printer names with accented letters or CJK characters.
Encode these header values as UTF-8 bytes, which ntfy handles correctly.
Test notifications were unaffected because they use a hardcoded ASCII
title and no image attachment.
When running multiple virtual printers with different access codes on
separate bind IPs, FTP connections were always routed to the wrong VP.
Root cause: the iptables REDIRECT rule (990→9990) rewrites the
destination IP to the incoming interface's primary address. With Linux's
weak host model (arp_filter=0), packets for secondary IPs arrive on the
primary interface, and REDIRECT sends them all to the first VP's FTP
server. MQTT was unaffected because port 8883 had no redirect.
Fix: FTP server now binds directly to port 990 (standard implicit FTPS),
eliminating the iptables redirect entirely. Requires CAP_NET_BIND_SERVICE
(already set in the systemd service file and Docker image).
Also removed a global asyncio set_exception_handler() in the MQTT server
that was overwritten by each VP instance, causing spurious "Unhandled
exception in client_connected_cb" errors on startup.
Changes:
- FTP_PORT: 9990 → 990 (ftp_server.py)
- Removed set_exception_handler() from MQTT server
- Updated Dockerfile, docker-compose.yml port mappings
- Deprecated --redirect-990 in install script
- Updated wiki: removed iptables instructions for all platforms
- Added migration guide (docs/migration-vp-ftp-port.md)
- Added unit tests for port constant and no-global-state invariant
After assigning a spool to an AMS slot, the Bambuddy UI could show the
wrong filament preset (e.g. "Bambu PLA Matte" instead of "Bambu PLA
Silk") even though the printer was configured correctly.
Two bugs:
1. AssignSpoolModal (PrintersPage hover card path) never saved the slot
preset mapping to the DB, so the display fell back to the old/stale
mapping from a previous manual configuration.
2. AssignToAmsModal (SpoolBuddy path) constructed the preset name from
spool.material + spool.subtype ("PLA Silk") instead of using the
authoritative spool.slicer_filament_name ("Bambu PLA Silk").
Fix: the backend now saves the slot preset mapping in assign_spool()
after successful MQTT configuration, using slicer_filament_name as the
display name. This covers both frontend paths and ensures the correct
name is always stored.
FTP PASS commands were logged with the plaintext password visible in
log files. Since support packages include logs and are shared publicly
on GitHub issues, this exposed user access codes. Now redacted as
PASS ********.
Print complete notifications were chained behind the finish photo
capture task with no timeout. If photo capture hung, the notification
would never send. Added a 45-second timeout so notifications always
fire regardless of photo outcome.
Also added diagnostic logging to MQTT state detection and upgraded
notification error logging to include stack traces for easier
debugging.
X1C and X1 virtual printers used legacy SSDP model codes
(3DPrinter-X1-Carbon, 3DPrinter-X1) that BambuStudio doesn't
recognize, causing "incompatible printer preset" errors when
sending prints. Changed to the correct codes (BL-P001, BL-P002)
that real printers report via SSDP.
Also fixed proxy mode auto-inherit storing printer display names
(e.g. "X1C") instead of SSDP codes, by adding a resolution layer
that maps display names to model codes.
DB migration auto-converts existing VPs on startup.
Per-printer camera rotation (0°/90°/180°/270°) for cameras mounted
in portrait or upside-down. CSS rotation for live views, Pillow
rotation for notification snapshots. Setting visible in external
camera config when enabled.
Daily beta build tags (e.g. v0.2.3b1-daily.20260316) were not detected
as prereleases because parse_version() only checked the last
dot-separated segment for letters. The daily date suffix is purely
numeric, so it passed the stable release check. Now checks the entire
version string for prerelease markers.
Add tests, docs, and ruff fixes for per-user email notifications
- Fix missing timezone import in email_service.py (F821)
- Fix unused lambda arg in main.py asyncio done_callback (ARG005)
- Fix E302 blank line spacing for mark_printer_stopped_by_user
- Fix F821/UP037 forward reference in user_email_pref model
- Fix SettingsPage test for duplicate "Notifications" text
- Add backend unit tests for permissions, schemas, and templates
- Add backend integration tests for user-notifications API
- Add frontend tests for NotificationsPage
- Add user_email_pref model import to test conftest
- Update CHANGELOG and README
Webhook providers did not include image data (e.g. camera snapshots
from first layer complete notifications) even though other providers
like Telegram, Pushover, and Discord already attached them. The webhook
payload now includes a base64-encoded "image" field when a snapshot is
available (generic format only, excluded from Slack format).
- Sanitize project notes with DOMPurify before rendering via
dangerouslySetInnerHTML (ProjectDetailPage.tsx)
- Replace hand-rolled HTML sanitizer with DOMPurify in ProjectPageModal
to prevent attribute injection via crafted 3MF href values
- Block /api/v1/auth/setup when auth is already enabled to prevent
unauthenticated clients from disabling authentication remotely
The Debian ffmpeg package uses GnuTLS, whose hardened defaults reject
TLS renegotiation and legacy ciphers that some Bambu printer firmwares
(notably P2S) rely on — causing RTSP sessions to drop after a few
seconds.
Add a local TLS termination proxy (Python ssl/OpenSSL) that handles
the TLS connection to the printer and exposes a plain RTSP port to
ffmpeg. The proxy rewrites RTSP request-line URLs (rtsp://proxy →
rtsps://printer) while preserving Authorization headers so Digest
auth hashes remain valid.
Also:
- Reduce RTSP reconnect delay from 1.0s to 0.2s
- Add ffmpeg fast-start flags (-probesize 32, -analyzeduration 0,
-fflags nobuffer, -flags low_delay)
- Fix external camera double rate-limiting causing choppy streams
- Apply TLS proxy to external camera rtsps:// URLs and snapshot capture
- Update orphan ffmpeg cleanup to match rtsp:// (proxied) URLs
- Add unit tests for RTSP URL rewriting and proxy lifecycle
The Bambu Cloud API returns the base filament_id for versioned
setting IDs (e.g. GFSL99 → GFL99 for all "Generic PLA" variants),
so assigning a spool with a specific variant like "Generic PLA Silk"
(GFSL99_01) would configure the AMS slot with the base "Generic PLA"
profile (GFL99) instead of the correct one (GFL96).
Added a post-resolution cross-check: if the resolved filament_id maps
to a different name than the spool's stored preset name, reverse-lookup
the correct filament_id from the built-in filament table.
Printer File Manager Doesn't Auto-Refresh ([#704](https://github.com/maziggy/bambuddy/issues/704)) — The printer file manager (SD card browser) only fetched the file list once when opened. Files uploaded from BambuStudio/OrcaSlicer while the modal was open wouldn't appear until the user clicked the refresh button or reopened the modal. Now auto-refreshes every 30 seconds while open. Reported by @shadowjig.
Database Connection Pool Exhaustion Under Load ([#704](https://github.com/maziggy/bambuddy/issues/704)) — Background tasks (print scheduler FTP uploads, camera captures, notification sends, timelapse stitching) held database sessions open during slow network I/O, consuming connection pool slots for seconds at a time. With the default pool of 15 connections (size 5 + overflow 10), concurrent operations during print start/complete events could exhaust the pool, causing `QueuePool limit reached` errors and `greenlet_spawn` failures in RFID spool auto-assignment. Doubled the pool to 30 connections (size 10 + overflow 20). Reported by @shadowjig.
RTSP stream URLs (rtsps://bblp:<code>@<ip>:322/...) were not covered
by the credential sanitizer, leaking access codes in support bundles
and bug report logs. Extended the URL regex to match rtsps:// and added
access codes to the sensitive string collection for exact-match
redaction in both export paths.
Ambient drying: automatically dry filament on idle printers when
humidity exceeds threshold, regardless of queue state. Separate toggle
from queue auto-drying — both can run simultaneously. Uses the same
presets, humidity threshold, and power constraint detection.
Fix: block mode (wait for drying) previously skipped the humidity
auto-stop check for already-drying printers, causing drying to
continue indefinitely. Now only prevents starting new drying.
Queue auto-drying: scheduler automatically starts drying on idle printers
with scheduled queue prints when AMS humidity exceeds the configured
threshold. Uses conservative parameters (lowest temp, longest duration)
for mixed filaments. Drying stops when humidity drops below threshold
(30-minute minimum prevents oscillation), when scheduled items are
removed, or when the feature is disabled. Optional "block queue" mode
delays the next print until drying completes.
Configurable presets: temperature and duration per filament type,
editable in Settings → Print Queue, used by both manual drying popover
and queue auto-drying. Separate presets for AMS 2 Pro (n3f) and AMS-HT
(n3s) reflecting different heating capabilities.
PSU detection: drying button disabled with tooltip when dry_sf_reason
indicates insufficient power. Parses drying status bits and dry_sf_reason
from AMS info hex string via MQTT.
Backend: print_scheduler.py (+316 lines), bambu_mqtt.py, printer_manager,
schemas, settings route. Frontend: PrintersPage drying presets prop,
SettingsPage drying config UI, i18n (7 locales). Tests: 27 new tests in
test_scheduler_auto_drying.py covering conservative params, presets,
state sync, stop logic, minimum drying time, and auto-stop regressions.
Fix P2S camera stream dropping and snapshot capture race (#661)
P2S firmware's TLS renegotiation is rejected by Debian's hardened GnuTLS
defaults, causing ffmpeg RTSP sessions to drop after ~3 seconds. Add
GnuTLS config allowing unsafe renegotiation and legacy ciphers. Also add
ffmpeg fast-start flags, reduce reconnect delay from 1.0s to 0.2s,
remove double rate-limiting on external camera streams, and fix orphan
cleanup killing snapshot capture ffmpeg processes (exit code -9).
Or as a single combined commit:
Fix P2S camera streaming, snapshot race, and energy stats (#661, #695)
Camera: P2S firmware's TLS renegotiation rejected by Debian's hardened
GnuTLS defaults, dropping RTSP sessions after ~3s. Add GnuTLS compat
config, ffmpeg fast-start flags, reduce reconnect delay to 0.2s, remove
external camera double rate-limiting, and register snapshot ffmpeg PIDs
with the orphan tracker to prevent SIGKILL during capture.
In "total" energy tracking mode, the stats endpoint queried smart plug
lifetime counters which can't be filtered by date range. Energy costs
and kWh stayed the same regardless of timeframe selection. Fall back to
per-print archive data when date filters are active.
parse_version() misclassified "0.2.2b4-daily.20260313" as a release
because the daily suffix made the last dot-segment ("20260313") contain
no alpha chars, bypassing prerelease detection. Strip -daily.YYYYMMDD
suffix before parsing so daily builds compare as their base beta version.
The migration that removes the UNIQUE constraint on smart_plugs.printer_id
used an exact substring match ("printer_id INTEGER UNIQUE") to detect the
constraint. Databases created with older SQLAlchemy versions may express
the constraint differently (quoted column names, table-level UNIQUE clause,
or separate UNIQUE indexes), causing the migration to silently skip.
Users hit "IntegrityError: UNIQUE constraint failed: smart_plugs.printer_id"
when assigning a second HA switch to a printer.
Replace the exact string match with regex pattern matching that handles
inline constraints, table-level UNIQUE(printer_id), quoted column names,
and standalone UNIQUE indexes.
Printers send many undocumented HMS codes (e.g. 0501_0002, 0501_0004,
0300_0001) that don't correspond to real errors — calibration status,
firmware state, etc. The frontend already filters these out (only shows
codes in ERROR_DESCRIPTIONS), but the backend notified for all codes
with severity >= 2, causing spurious email/push notifications on every
backend restart when a printer has active phantom codes.
Flip the logic: only send notifications for HMS codes with a known
description in the backend's HMS_ERROR_DESCRIPTIONS dictionary. Also
fix the log message to report the actual number of notifications sent,
not the pre-filter count.
Non-script HA entities (switch/light/input_boolean) on the printer card
always sent turn_on when clicked, which is a no-op when the switch is
already on. Now sends toggle for non-script entities so the badge click
actually changes the switch state. Script entities still use turn_on.
Also fix SmartPlugManager._get_plug_for_printer() using
scalar_one_or_none() which crashes with MultipleResultsFound when
multiple plugs are assigned to the same printer (e.g., Tasmota + HA
switch). Now fetches all plugs and returns the main non-script plug.
Add tests for both fixes: _get_plug_for_printer multi-plug handling
(5 tests) and canonicalFilamentType/filamentTypesCompatible/autoMatch
PA-CF equivalence (8 tests).
Bambu Lab firmware treats PA-CF, PA12-CF, and PAHT-CF as interchangeable,
but the print scheduler and filament override UI used exact string matching.
A 3MF requiring PA-CF wouldn't match PA12-CF in the AMS, leaving the
override dropdown disabled and preventing scheduler assignment.
Add a filament type equivalence system (both backend and frontend) so
these PA variants are treated as compatible in scheduler assignment,
AMS slot matching, force color match validation, and the override dropdown.
Also fix the "Force color match" checkbox click target being too wide
(entire row instead of just the checkbox/label) by changing flex to
inline-flex on the label element.
When all higher-priority slot-to-tray mapping methods failed (MQTT
mapping, print command mapping, queue mapping, color matching), the
internal usage tracker fell back to slot_id - 1 which can never reach
external spool IDs (254/255) or AMS-HT IDs (128+). Added position-based
resolution using sorted available tray IDs, matching the Spoolman fix
from PR #686.
Notify users when the first layer finishes printing so they can check
adhesion remotely. Triggers once per print when layer 2 begins
(layer_num >= 2, capped at <= 5 to handle reconnects). Includes a
camera snapshot attachment. Adds the on_first_layer_complete toggle
to all notification providers, with backend/frontend/i18n support
across all 7 locales.
When creating a virtual printer in proxy mode, the model was always set
to X1C because the frontend hides the model dropdown and the backend
used a hardcoded default. Now auto-inherits the model from the target
printer in proxy mode — on create, on target printer change, and on
mode switch to proxy.
Start, monitor, and stop drying sessions for AMS 2 Pro (n3f) and
AMS-HT (n3s) directly from the Printers page. Flame icon in AMS card
header opens a popover with filament-based temperature/duration presets
from BambuStudio. Live countdown status bar shows time remaining.
Backend: cache module_type from MQTT get_version, expose dry_time and
module_type in both WebSocket and REST paths, add supports_drying()
with firmware gating, add server-side guard on start_drying endpoint.
Frontend: drying button, popover with filament select + temp/duration
sliders, status bar, start/stop mutations. i18n for all 7 locales.
Supported: X1/X1C (fw 01.09+), P1P/P1S (fw 01.08+), H2D (fw 01.02.30+),
H2D Pro, X1E. Not supported: P2S, A1, A1 Mini, H2S, H2C.
Cloud credentials were stored globally — one Bambu Cloud account per
Bambuddy instance. When auth was enabled, any user logging into Cloud
overwrote everyone else's credentials. Credentials are now stored
per-user: each user gets their own independent Cloud login.
Also fixed cloud data endpoints (settings, fields, preset CRUD)
requiring settings:read/settings:update permissions instead of
cloud:auth — users who had "Cloud Auth" enabled but "Settings"
disabled couldn't load profiles after logging in.
The P2S firmware drops RTSP sessions after a few seconds with an I/O
error. The backend treated this as fatal, ending the MJPEG stream and
forcing the frontend through a full reconnection cycle. Added transparent
auto-reconnection: when ffmpeg's RTSP connection dies, it respawns
immediately and continues streaming MJPEG frames to the browser with
only a brief freeze (~1s). Up to 30 reconnections before giving up.
Three bugs: (1) home_flag bit 18 is set on all printers regardless
of connection type, so every ethernet-capable model showed the badge
even on WiFi. Replaced with wifi_signal heuristic — ethernet printers
with WiFi disabled report a hardcoded -90 dBm sentinel. (2) The lazy
import used `from app.utils.printer_models` which crashes with
ModuleNotFoundError in paho-mqtt's background thread (correct path:
backend.app.utils.printer_models). This killed the thread, causing
all printers to go stale after 60s and disconnect/reconnect in a
loop. (3) WiFi-only models excluded via model-based gating.
home_flag bit 18 is set on all printers regardless of hardware,
causing the ethernet badge to appear on WiFi-only models (A1, P1P,
etc.). The previous fix removed the feature entirely, so ethernet
printers lost their badge too.
Now only trusts bit 18 on models with an ethernet port (X1C, X1E,
P1S, P2S, H2D, H2D Pro, H2C, H2S). WiFi-only models always show
the WiFi signal badge.
maziggy