Some printers (e.g. H2D) only send {id, state} in incremental MQTT
tray updates — no tray_type, tray_color, or other fields. When
filament is unloaded (state changes from 11 to 10), the old tray
data persisted indefinitely because the merge logic only updates
fields present in the incoming message.
Backend:
- Detect tray state != 11 without tray_type in incremental updates
and clear stale tray data (bambu_mqtt.py)
- Expose tray `state` field via REST API and WebSocket broadcasts
(printer.py schema, printers.py route, printer_manager.py)
- Include AMS tray content in WebSocket dedup key so load/unload
transitions trigger broadcasts (main.py)
Frontend:
- Add `state` to AMSTray interface (client.ts)
- Show configure/assign buttons for state=10 (spool present, not
loaded) but hide for state=9 (truly empty) on AMS/HT slots
- Hide fill level bar on empty slots
Tests:
- 5 new tests covering state-based clearing, preservation, reload,
and idempotency
Add a "Rotate spool during drying" checkbox to the manual drying popover
for AMS 2 Pro and AMS-HT units. The firmware-level rotate_tray field was
already sent (hardcoded to false) — this makes it user-configurable.
The checkbox defaults to unchecked and resets each time the popover opens.
Firmware silently disables rotation if filament is currently loaded.
Queue auto-drying: scheduler automatically starts drying on idle printers
with scheduled queue prints when AMS humidity exceeds the configured
threshold. Uses conservative parameters (lowest temp, longest duration)
for mixed filaments. Drying stops when humidity drops below threshold
(30-minute minimum prevents oscillation), when scheduled items are
removed, or when the feature is disabled. Optional "block queue" mode
delays the next print until drying completes.
Configurable presets: temperature and duration per filament type,
editable in Settings → Print Queue, used by both manual drying popover
and queue auto-drying. Separate presets for AMS 2 Pro (n3f) and AMS-HT
(n3s) reflecting different heating capabilities.
PSU detection: drying button disabled with tooltip when dry_sf_reason
indicates insufficient power. Parses drying status bits and dry_sf_reason
from AMS info hex string via MQTT.
Backend: print_scheduler.py (+316 lines), bambu_mqtt.py, printer_manager,
schemas, settings route. Frontend: PrintersPage drying presets prop,
SettingsPage drying config UI, i18n (7 locales). Tests: 27 new tests in
test_scheduler_auto_drying.py covering conservative params, presets,
state sync, stop logic, minimum drying time, and auto-stop regressions.
Start, monitor, and stop drying sessions for AMS 2 Pro (n3f) and
AMS-HT (n3s) directly from the Printers page. Flame icon in AMS card
header opens a popover with filament-based temperature/duration presets
from BambuStudio. Live countdown status bar shows time remaining.
Backend: cache module_type from MQTT get_version, expose dry_time and
module_type in both WebSocket and REST paths, add supports_drying()
with firmware gating, add server-side guard on start_drying endpoint.
Frontend: drying button, popover with filament select + temp/duration
sliders, status bar, start/stop mutations. i18n for all 7 locales.
Supported: X1/X1C (fw 01.09+), P1P/P1S (fw 01.08+), H2D (fw 01.02.30+),
H2D Pro, X1E. Not supported: P2S, A1, A1 Mini, H2S, H2C.
home_flag bit 18 is set on all printers regardless of hardware,
causing the ethernet badge to appear on WiFi-only models (A1, P1P,
etc.). The previous fix removed the feature entirely, so ethernet
printers lost their badge too.
Now only trusts bit 18 on models with an ethernet port (X1C, X1E,
P1S, P2S, H2D, H2D Pro, H2C, H2S). WiFi-only models always show
the WiFi signal badge.
home_flag bit 18 was incorrectly interpreted as "wired/ethernet
connection", causing the ethernet badge to always show — even on
printers without an ethernet port (e.g. A1, P1S). This hid the
WiFi signal indicator entirely.
Removed the wired_network field and ethernet badge UI. The WiFi
signal badge now shows correctly whenever the printer reports
signal strength.
* AMS Labels addition to PrintersPage
* Added database reinitialization for schema migrations on database restore
* Bug fixes and AMS Label persistence updates
* Update database.py to resolve PR conflicts
* PR Comment Resolution
* Resolve conflicts in database.py for PR#570
* Updates to address PR#570 additional comments
* Optimize visibility handling for popup component
* Improve serial key handling in printers.py
Refactor serial key assignment to handle empty AMS serial gracefully.
* Implement error handling in serial number mapping
Add error handling for serial number mapping.
* Add migration to drop old ams_labels table
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
Parse home_flag bit 18 (0x00040000) from MQTT to detect ethernet
connections. When set, the printer card shows a green "Ethernet"
badge with a cable icon instead of WiFi signal strength in dBm.
The printer info modal also displays "Ethernet" instead of WiFi
signal details.
The H2C dual nozzle variant reports model code O1C2 via MQTT, but only
O1C was recognized. This caused the camera to use the wrong protocol
(chamber image on port 6000 instead of RTSP on port 322), producing a
reconnect loop. Added O1C2 to all model ID maps across 8 files.
The printer only sends PAUSE via MQTT gcode_state, never PAUSED.
Removed all unreachable PAUSED comparisons from frontend (4 files)
and backend (2 files).
Suppress SQL/aiosqlite debug noise (~90% log volume reduction), add
caller-traced PRINT COMMAND logging to start_print(), log scheduler
queue checks, tighten stale archive ilike match to exact match, and
warn on multiple queue items in "printing" status. Includes 18 new
unit tests.
Backend:
- Add dual external spool support for H2D (vt_tray as list: Ext-L/Ext-R)
- Add cloud filament ID map endpoint (/cloud/filament-id-map)
- Fix RFID spool data erased by periodic AMS updates (skip tag matcher
for RFID-tagged trays)
- Fix AMS slot config overwrites RFID spool state
- Fix K-profile selection corrupts existing profiles on X1C/P1S
- Resolve K-profiles filament name via cloud filament ID map
- Update print scheduler and usage tracker for dual external spools
Frontend:
- Add printer model filtering to ConfigureAmsSlotModal (cloud/local/builtin
presets filtered by @BBL model suffix and compatible_printers)
- Add pre-population for configured slots (preset, color, K-profile)
- Add K-Profiles view with accurate filament name resolution
- Internationalize all ConfigureAmsSlotModal strings (en/de/fr/it/ja — 21 keys)
- Add 5 new ConfigureAmsSlotModal tests (model filtering, pre-selection,
color pre-population, i18n)
- Update PrintersPage for dual external spool rendering
Docs:
- Update CHANGELOG, README, website features, and wiki AMS docs
Existing code did not allow the MQTT relay to be shut down gracefully.
Moved _client.loop_stop() after _client.disconnect() call to allow
Paho to be notified to disconnect and shut down without reconnecting.
Added _client._disconnection_event to help prevent a race condition where
a disconnection is requested but the loop is immediately stopped.
Modify _client.disconnect() to take a timeout parameter (default: 0).
Wait in that routine for the disconnection event with the given timeout.
Apply same logic to MQTTSmartPlugService and add to shutdown sequence.
Shutdown the MQTT relay last in lifespan() with a hard-coded 2 sec timeout.
The disconnect timeout is also available to printer MQTT clients.
It is left to the default of 0 at this time. If later enabled,
it should be a configuration parameters, especially for large farms.
Fixes: #327
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
The print scheduler previously treated FINISH/FAILED as idle states
and would auto-start the next queued print before the user cleared
the build plate. Now requires explicit user confirmation via a
"Clear Plate & Start Next" button on the printer card. Uses an
in-memory plate-cleared flag — no MQTT command needed since the
scheduler's start_print overrides the printer state.
Capture 4 additional fields from MQTT nozzle data (max_temp, serial_number,
filament_color, filament_id) and surface them through REST/WebSocket APIs.
Add per-slot hover popover to the NozzleRackCard showing all metrics, filament
color backgrounds on slots, and i18n labels in all 4 locales.
The H2C printer has a tool-changer with a 6-nozzle rack, but
device.nozzle.info entries beyond index 1 were being dropped due to a
hardcoded 2-nozzle limit. This adds full nozzle rack storage, API
exposure, and a frontend card showing all dock positions.
Track and display who performs key actions in Bambuddy:
- Archives: who uploaded each archive file
- Library: who uploaded each file in File Manager
- Queue: who added each print job to the queue
- Printers: who started the current print (reprint tracking)
Backend changes:
- Add created_by_id column to print_archives, library_files, print_queue tables
- Add database migrations for new columns (auto-run on startup)
- Update archive, library, and queue routes to capture current user
- Add current-print-user endpoint for printer reprint tracking
- Track reprint user in PrinterManager in-memory state
- Fix file uploads not sending auth headers (FormData requires explicit headers)
Frontend changes:
- Display username on archive cards, library files, queue items
- Show "Started by" on printer cards during active prints
- Add auth headers to all 12 FormData upload functions
- Update TypeScript types for user tracking fields
Tests:
- Add unit tests for PrinterManager user tracking methods (7 tests)
- Add integration tests for current-print-user endpoint (3 tests)
- Add integration tests for library file user tracking (3 tests)
Works when authentication is enabled; gracefully hidden when disabled.
Closes#206
- Add H2D Pro option to printer model dropdowns (add/edit modals)
- Support both O1E and O2D internal codes for H2D Pro compatibility
- Add O2D to RTSP-capable and chamber temp supported models
- Add H2DPRO variant to firmware check mapping
- Add H2D Pro and X1E to bug report issue template
Closes#192
Some A1/A1 Mini firmware versions incorrectly report stg_cur=0 (which
maps to "Printing") even when the printer is idle. This is a known
firmware bug also observed in the Home Assistant Bambu Lab integration.
- Add A1_MODELS constant listing affected model variants
- Add has_stg_cur_idle_bug() helper to identify affected models
- Update get_derived_status_name() to check gcode_state before stg_cur
for A1 models: if IDLE + stg_cur=0, return None to show "Idle"
- Fix only applies when all conditions match (A1 model + IDLE + stg_cur=0)
- Non-A1 printers and A1 printers without the bug are unaffected
Closes#168
Add support for external network cameras (MJPEG, RTSP, HTTP snapshot)
that replace a printer's built-in camera when configured.
Features:
- Live streaming on printers page (replaces built-in camera)
- Finish photo capture from external camera on print complete
- Layer-based timelapse: captures frame on each layer change,
stitches to MP4 video on print completion
Backend changes:
- Add external_camera_url, external_camera_type, external_camera_enabled
fields to Printer model with database migration
- New external_camera.py service: MJPEG/RTSP/snapshot frame capture,
connection testing, MJPEG stream generation
- New layer_timelapse.py service: TimelapseSession management,
layer-by-layer frame capture, ffmpeg video stitching
- Add on_layer_change callback to MQTT client and printer manager
- Update camera routes with external camera streaming and tracking
- Update print lifecycle hooks for timelapse start/stitch/cancel
- Add external camera fields to backup/restore
- Rate limiting for external camera streams (prevents browser freeze)
Frontend changes:
- Add external camera configuration UI in Settings > Camera
- Per-printer enable toggle, URL input, type selector, test button
- Toast notification on save
Closes#143
Root Cause: P2S (and other newer models) may report their model as internal codes (e.g., "N7" for P2S) rather than display names in MQTT/SSDP responses. The camera code
only checked for display names like "P2S", causing it to incorrectly use the chamber image protocol (for A1/P1) instead of RTSP.
Internal Code Mapping:
BL-P001 → X1/X1C (RTSP)
C13 → X1E (RTSP)
O1D → H2D (RTSP)
O1C → H2C (RTSP)
O1S → H2S (RTSP)
O1E → H2D Pro (RTSP)
N7 → P2S (RTSP)
C11 → P1P (Chamber)
C12 → P1S (Chamber)
N2S → A1 (Chamber)
N1 → A1 Mini (Chamber)
Closes#127
New feature: Publish BamBuddy events to external MQTT brokers for integration
with Home Assistant, Node-RED, and other automation platforms.
Backend changes:
- New MQTTRelayService (backend/app/services/mqtt_relay.py) with paho-mqtt
- MQTT settings added to AppSettings schema (enabled, broker, port, auth, TLS)
- New /settings/mqtt/status endpoint for connection status
- Event hooks in main.py, print_queue.py, print_scheduler.py, maintenance.py, smart_plugs.py
- PrinterInfo class and get_printer() method added to PrinterManager
- MQTT reconfiguration added to backup/restore flow
- Printer status throttled to 1 update/sec to avoid flooding
Frontend changes:
- New "Network" tab in Settings (between Filament and API Keys)
- FTP Retry settings moved from General to Network tab
- MQTT configuration card with broker, port, TLS toggle, auth fields
- Port auto-populates when TLS toggled (1883 ↔ 8883)
- Connection status indicator (green/red dot) in tab and card header
- Real-time status polling when on Network tab
Published topics:
- bambuddy/status - Online/offline
- bambuddy/printers/{serial}/status - Printer state (throttled)
- bambuddy/printers/{serial}/print/* - Print lifecycle
- bambuddy/printers/{serial}/ams/changed - AMS changes
- bambuddy/queue/* - Queue events
- bambuddy/maintenance/* - Maintenance alerts
- bambuddy/smart_plugs/* - Plug state/energy
- bambuddy/archive/* - Archive events
Tests:
- Added MQTT settings and status endpoint tests
Closes#78
Fix Applied:
1. Added supports_chamber_temp() helper function that returns True only for X1/X1C/X1E, P2S, and H2 series
2. Modified printer_state_to_dict() to filter out chamber, chamber_target, chamber_heating from temperatures for unsupported models
3. Added model caching in PrinterManager so we can look up the model without a database query
4. Updated all callers (main.py, websocket.py) to pass the model
The chamber temperature widget will now simply not appear for P1S/P1P/A1/A1Mini printers since the temperatures.chamber field won't be sent to the frontend.
Features:
- Add print options UI to reprint modal (bed leveling, flow calibration,
vibration calibration, first layer inspection, timelapse)
- Collapsible "Print Options" section with toggle switches
- Default values: bed leveling=on, vibration_cali=on, others=off
Fixes:
- Fix AMS mapping format to match Bambu Studio exactly
- Use slot_id from 3MF to position tray IDs correctly
- Fill unused slots with -1 placeholder
- Add ams_mapping2 with detailed {ams_id, slot_id} pairs
- Fix print command format for proper printer recognition
- Add auto_bed_leveling, cfg, extrude_cali_flag, nozzle_offset_cali
- Use American spelling "bed_leveling" (not British "bed_levelling")
- Match sequence_id format from official apps
- Prevent duplicate tray assignment in filament matching
This resolves the "stuck at filament change" issue on multi-color reprints
affecting X1C and other multi-AMS printer configurations.
- Controls section: New section before Filaments with fan status and printer controls
- Part cooling fan (Fan icon, cyan)
- Auxiliary fan (Wind icon, blue)
- Chamber fan (AirVent icon, green)
- Stop/Pause/Resume buttons moved from Temperature section
- Real-time updates: Fan speeds now broadcast via WebSocket
- Backend: Parse MQTT fan data (cooling_fan_speed, big_fan1_speed, big_fan2_speed)
- Convert 0-15 scale to 0-100%
- Always-visible badges with dynamic coloring based on fan state
- Removed horizontal dividers before Controls and Filaments sections
- Skip Objects Modal:
- Object ID markers overlaid on preview image (grid layout)
- Large prominent ID badges to match printer display
- Info banner explaining to match IDs with printer screen
- Layer warning when skip unavailable (layer <= 1)
- Red badge on button showing skipped count
- Preview image now shown when paused (not just running)
- Close with ESC key or click outside modal
- Full light/dark theme support
- Backend:
- Extract object positions from 3MF (include_positions=True)
- API returns x/y coordinates for objects (when available)
- Parse s_obj from printer MQTT for skipped state persistence
- Cover URL available in PAUSE/PAUSED states
- Tests:
- Added test for objects with position data
1. "Unknown Status (255)" bug
File: backend/app/services/printer_manager.py:291-293
Problem: A1/P1 printers send stg_cur=255 when idle (unlike X1 which uses -1). The code treated 255 as a valid stage number and returned "Unknown stage (255)".
Fix: Changed the condition from if state.stg_cur >= 0: to if 0 <= state.stg_cur < 255: so that 255 is now treated as "no calibration stage" (same as -1).
2. AMS humidity/temp displaced on mobile
File: frontend/src/pages/PrintersPage.tsx:1164-1212
Problem: The AMS row used a rigid horizontal flex layout that didn't adapt to narrow mobile screens, causing humidity/temperature indicators to be displaced.
Fix:
- Added flex-wrap to allow wrapping on very narrow screens
- Added ml-auto to humidity/temp section to keep it right-aligned
- Added max-w-[60px] sm:max-w-none to truncate long filament names on mobile
- Changed gap from fixed gap-3 to responsive gap-2 sm:gap-3
Tests Added
4 new unit tests for get_derived_status_name:
- test_stg_cur_255_returns_none - Verifies A1/P1 idle state
- test_stg_cur_negative_one_returns_none_when_idle - Verifies X1 idle state
- test_valid_stage_returns_name - Verifies valid stages work
- test_stg_cur_zero_returns_printing - Verifies printing state
All 382 tests pass.
- Add getStatusDisplay() helper in frontend to format status nicely
- Add get_derived_status_name() in backend to compute status from:
- stg_cur calibration stages (bed leveling, vibration comp, etc.)
- Temperature data when stg_cur unavailable (heating heatbed/nozzle)
- Include stg_cur and stg_cur_name in WebSocket broadcasts
- Update broadcast status key to detect heating phase changes
Printer cards now show: "Heating heatbed", "Heating nozzle", "Preparing",
"Auto bed leveling", "Cleaning nozzle tip", and 60+ other stage names
instead of just "Printing" or "Idle".
Problem: xcam data was parsed BEFORE _was_running was set to True, so timelapse detection failed when both arrived in the same message.
Fix: Added timelapse detection at two critical points:
# Lines 1375-1381: When entering RUNNING state
if self.state.state == "RUNNING" and current_file:
if not self._was_running:
if self.state.timelapse:
self._timelapse_during_print = True
logger.info(f"[{self.serial_number}] Timelapse detected when entering RUNNING state")
# Lines 1391-1399: When print start detected
if self.state.timelapse:
self._timelapse_during_print = True
logger.info(f"[{self.serial_number}] Timelapse detected at print start")
2. Callback Error Handling (main.py + printer_manager.py)
Problem: The on_print_complete callback was hanging silently - no logs after "Found archive".
Fixes:
- Added try/except wrapper around "Update archive status" section (line 749-767)
- Added [CALLBACK] log messages at start and end of callback
- Added exception handler to _schedule_async in printer_manager.py to log any exceptions from async callbacks
3. New Integration Tests (test_bambu_mqtt.py)
Added TestRealisticMessageFlow class with 5 new tests that simulate real MQTT message sequences:
1. test_timelapse_detected_at_print_start_in_same_message - The critical race condition test
2. test_timelapse_not_detected_when_disabled
3. test_timelapse_detected_when_enabled_after_print_start
4. test_print_complete_includes_timelapse_flag_full_flow - Full lifecycle test
5. test_print_failed_includes_timelapse_flag
These tests process messages through _process_message() with proper {"print": {...}} wrapping, matching real MQTT flow.
Files Modified:
- backend/app/services/bambu_mqtt.py - Timelapse race condition fix
- backend/app/main.py - Error handling + logging for on_print_complete
- backend/app/services/printer_manager.py - Exception capture in _schedule_async
- backend/tests/unit/services/test_bambu_mqtt.py - New integration tests
Next Steps
You should restart the application to apply these changes. The next print will show:
- [CALLBACK] on_print_complete started for printer X
- [ARCHIVE] Updating archive X status...
- [ENERGY], [PHOTO], [AUTO-OFF] logs (if those features trigger)
- [CALLBACK] on_print_complete finished for printer X, archive X
- Add dynamic humidity indicator with Bambu Lab style water drop icons
- Empty drop for good (dry), half-filled for fair, full for bad (wet)
- Configurable thresholds via Settings page
- Add dynamic temperature indicator with thermometer icons
- Empty for good, half-filled for fair, full for hot
- Colors match humidity: green/gold/red
- Add AMS Display Thresholds settings card
- Humidity thresholds (good/fair) configurable
- Temperature thresholds (good/fair) configurable
- Persisted in backend settings
- Fix AMS card stability issues
- Add ams_extruder_map to WebSocket broadcasts
- Cache AMS data and extruder map to prevent bouncing
- Fix L/R nozzle indicator for dual-nozzle H2 printers
- Fix status summary bar counting
- Don't count printers with unknown status as offline
- Theme-aware L/R nozzle badges (light/dark theme support)
maziggy