Ambient drying: automatically dry filament on idle printers when
humidity exceeds threshold, regardless of queue state. Separate toggle
from queue auto-drying — both can run simultaneously. Uses the same
presets, humidity threshold, and power constraint detection.
Fix: block mode (wait for drying) previously skipped the humidity
auto-stop check for already-drying printers, causing drying to
continue indefinitely. Now only prevents starting new drying.
Queue auto-drying: scheduler automatically starts drying on idle printers
with scheduled queue prints when AMS humidity exceeds the configured
threshold. Uses conservative parameters (lowest temp, longest duration)
for mixed filaments. Drying stops when humidity drops below threshold
(30-minute minimum prevents oscillation), when scheduled items are
removed, or when the feature is disabled. Optional "block queue" mode
delays the next print until drying completes.
Configurable presets: temperature and duration per filament type,
editable in Settings → Print Queue, used by both manual drying popover
and queue auto-drying. Separate presets for AMS 2 Pro (n3f) and AMS-HT
(n3s) reflecting different heating capabilities.
PSU detection: drying button disabled with tooltip when dry_sf_reason
indicates insufficient power. Parses drying status bits and dry_sf_reason
from AMS info hex string via MQTT.
Backend: print_scheduler.py (+316 lines), bambu_mqtt.py, printer_manager,
schemas, settings route. Frontend: PrintersPage drying presets prop,
SettingsPage drying config UI, i18n (7 locales). Tests: 27 new tests in
test_scheduler_auto_drying.py covering conservative params, presets,
state sync, stop logic, minimum drying time, and auto-stop regressions.
Large Hueforge 3MF files (~28 MB) can't be downloaded from the
printer's FTP server within the previous 120s max timeout, especially
during active printing. Added 180s and 300s timeout options to the
FTP settings dropdown.
* feat(queue): show spool grams left in filament slot mapping
* Bumped version
* Add SpoolBuddy AMS slot config, external slots, and dashboard redesign
- AMS page: external spool slots (Ext/Ext-L/Ext-R), click-to-configure
modal on all slots, temperature/humidity threshold-colored indicators,
nozzle L/R badges for dual-nozzle printers, compact AMS-HT layout
- Dashboard: two-column layout with device status + printers list (left)
and current spool card (right), state-colored scale/NFC icons, dashed
border card styling
- Daemon: suppress redundant scale reports (±2g threshold + stability
state change detection) to prevent weight display bouncing
- TopBar: auto-select online printers only, SpoolBuddy logo
* Fix SpoolBuddy daemon crash when read_tag module is missing
NFCReader.__init__ imported read_tag and instantiated PN5180() outside
the try/except block, so a missing module crashed the entire daemon.
Moved the import inside the existing try/except so the daemon gracefully
skips NFC polling — matching the scale reader's existing behavior.
* Fix SpoolBuddy daemon failing to import hardware drivers
The daemon imports read_tag and scale_diag as bare modules, but they
live in spoolbuddy/scripts/ which isn't on sys.path when systemd runs
the daemon. Added scripts/ to sys.path at startup, resolved relative
to the module file. Also moved the read_tag import inside NFCReader's
try/except (was crashing the daemon instead of skipping gracefully)
and demoted hardware-not-available messages from ERROR to INFO.
* Increase scale moving average window to reduce weight bouncing
5 samples at 100ms (500ms window) wasn't enough to smooth NAU7802 ADC
noise — the averaged value still varied by >2g between 1s report
intervals, and the stability state kept flipping, triggering a report
every cycle. Increased to 20 samples (2s window) so noise is smoothed
before reaching the reporting layer.
* Remove stability flipping as scale report trigger
When ADC noise kept the spread hovering around the 2g stability
threshold, the stable flag toggled every cycle, forcing a report with
a slightly different weight each time. Now only actual weight changes
of >=2g trigger reports. The stable flag is still included in each
report for consumers that need it.
* Fix formatting of option elements in FilamentMapping
* Make low stock threshold editable
* Add new filter for low spools
* Update bug report template to require additional fields
* Added toast for invalid imputs with locales, updated inputb field restrictions
* Minor Spoolbuddy frontend improvements
* Updated test_backend.sh
* Updated Spoolbuddy install script to strip down Raspbian
* Updated Spoolbuddy install script
* Add API key auth support to /auth/me for SpoolBuddy kiosk
When Bambuddy auth is enabled, the SpoolBuddy kiosk gets redirected to
the login page because ProtectedRoute requires a user from GET /auth/me,
which only handled JWT tokens. The kiosk daemon already has an API key
but couldn't use it to satisfy the frontend auth check.
- Backend: /auth/me now accepts API keys (Bearer bb_xxx or X-API-Key)
and returns a synthetic admin UserResponse with all permissions
- Frontend: AuthContext reads ?token= from URL on first load, stores in
localStorage, and strips from URL (prevents history/referrer leakage)
- Install script: kiosk URL now includes ?token=${API_KEY}
- Tests: 3 new integration tests (Bearer API key, X-API-Key header,
invalid key rejection)
* SpoolBuddy touch-friendly UI overhaul for 1024x600 kiosk display
Enlarge all interactive elements across 9 SpoolBuddy components to meet
44px minimum tap targets on the RPi touchscreen. Increase nav icons
(20→24px), labels (10→12px), bar heights, section headers, printer
buttons, spool visualizations, fill bars, and status indicators.
Compact the dashboard stats bar and remove the printers card. Add
fullScreen prop to ConfigureAmsSlotModal with two-column layout
(filament list left, K-profile + color right) to eliminate scrolling.
* Minor changes, CSS fixes
* Refactor usageFilter state to remove 'lowstock' option for clarity
* Move var saving to API, add test coverage
* fix: threshold validation and cleanup
* Change test input from '150' to '0'
---------
Co-authored-by: tridev <c.tripod@gmx.ch>
Co-authored-by: MartinNYHC <mz@v8w.de>
- Redesign settings page with tabbed layout (Device, Display, Scale, Updates)
- Add screen blank timeout: blanks after touch inactivity, tap to wake
- Add CSS brightness filter for HDMI displays (no sysfs on HDMI)
- Add backend `language` field to app settings for server-side persistence
- Sync UI language from backend on kiosk load (separate Chromium instance)
- Top bar clock respects user's time format setting (system/12h/24h)
- Add SpoolBuddy settings translations for all 6 languages (en/de/fr/ja/it/pt-BR)
- Disable Chromium swipe-to-navigate in kiosk install script
- Add `video` group for DSI backlight access
Users on the Docker `latest` tag were seeing update notifications for beta
releases (e.g. v0.2.1b) they couldn't install. The update checker now fetches
/releases instead of /releases/latest and filters by parse_version() prerelease
detection. A new toggle in Settings (default: off) lets users opt in to beta
notifications.
Notify users when the print bed cools below a configurable threshold
(default 35°C) after a print finishes, so they know when to remove parts.
- Backend: DB migration, model, schemas, notification template, service
method, background cooldown monitor (polls every 15s, 30min timeout)
- Frontend: event toggle in provider card/modal, threshold setting in
Settings > Notifications, i18n keys for all 5 locales
- Tests: 4 backend + 4 frontend tests
- Docs: README, website, wiki updated
Users can now choose their preferred slicer (Bambu Studio or OrcaSlicer)
in Settings → General. All "Open in Slicer" buttons across Archives,
3D Preview, and context menus use the correct protocol for the selected
slicer. OrcaSlicer uses orcaslicer://open?file=<URL> on all platforms;
Bambu Studio uses bambustudio:// (Windows) or bambustudioopen:// (macOS/
Linux). Default remains Bambu Studio for backward compatibility.
- Add HA_URL and HA_TOKEN environment variables for automatic HA
integration configuration in HA add-on deployments
- Environment variables always override database settings with
non-negotiable precedence; database values preserved for fallback
- Auto-enable integration when both env vars are set; partial config
(one env var) uses database enable state without auto-enabling
- Add centralized get_homeassistant_settings() function following
Spoolman pattern; replace direct database queries across codebase
- Add ha_url_from_env, ha_token_from_env, ha_env_managed fields to
AppSettings schema to inform frontend about configuration source
- UI shows read-only fields with lock icons and "(Environment Managed)"
labels when env-controlled; toggle shows auto-enable badge
- Add comprehensive test coverage: 9 integration + 8 unit tests
Closes#283
- Replace number inputs with select dropdowns for retry attempts,
retry delay, and connection timeout to avoid auto-save race conditions
- Move connection timeout inside the FTP retry toggle section
- Add ftp_timeout to backend settings schema and integer parsing list
so the value actually persists (was silently dropped before)
Closes#275
Implement accurate per-filament usage tracking for Spoolman integration,
similar to OpenSpoolman v0.3.0. This replaces the previous single-spool
reporting with multi-material aware tracking.
Features:
- Parse G-code from 3MF files at print start to build per-layer,
per-filament cumulative extrusion maps
- Store tracking data in new `active_print_spoolman` database table
(survives server restarts for long prints)
- Report accurate partial usage when prints fail/cancel based on
actual layer progress and G-code data
- Add "Disable AMS Weight Sync" setting to prevent AMS percentage-based
weight estimates from overwriting Spoolman's granular tracking
- Add "Report Partial Usage for Failed Prints" toggle (only shown when
weight sync is disabled)
- Use Spoolman's filament density instead of defaults for mm-to-grams
conversion
- Prefer tray_uuid over tag_uid for spool identification
Add new setting "Check printer firmware" in Settings → General → Updates
that allows users to disable automatic firmware update checks from
Bambu Lab servers.
Closes#169
Expose printer telemetry at /api/v1/metrics in Prometheus text format for
integration with Grafana, Prometheus, and other monitoring systems.
Backend:
- Add metrics.py route with GET /api/v1/metrics endpoint
- Support optional bearer token authentication
- Export printer metrics: connection, state, temperatures, fans, WiFi
- Export print metrics: progress, remaining time, layer count
- Export statistics: prints by status, filament used, print time
- Export queue metrics: pending and active jobs
- Add prometheus_enabled and prometheus_token settings
Frontend:
- Add Prometheus Metrics card in Settings → Network tab
- Toggle to enable/disable metrics endpoint
- Optional bearer token field for authentication
- Display list of available metrics
Tests:
- Add test_metrics_api.py with 7 integration tests
- Test access control (disabled, enabled, token auth)
- Test metrics format and content validation
- Add {finish_photo_url} template variable for print_complete, print_failed,
print_stopped events
- Photo capture now completes before notification is sent (ensures image exists)
- Add External URL setting in Settings → Network (auto-detects from browser)
- Full URL constructed using external_url setting for external services
- Fix Telegram Markdown parsing error when messages contain URLs
- Add backend schema for external_url setting
- Add unit test for finish_photo_url variable passing
- New useMultiPrinterFilamentMapping hook for parallel printer status fetching
- Per-printer custom slot configuration with "Custom mapping" checkbox
- Auto-configure using RFID data to match filaments by type/color
- Match status indicator (exact/partial/missing) under each printer
- Re-read button to refresh loaded filaments
- New setting: "Expand custom mapping by default" in Settings → Filament
- FilamentMapping component now accepts defaultExpanded prop
Frontend:
- PrinterSelector: Inline mapping editor for each selected printer
- PrintModal: Fetches settings, auto-expands mapping when setting enabled
- SettingsPage: Toggle for per_printer_mapping_expanded
Backend:
- Added per_printer_mapping_expanded to AppSettings schema
- Added boolean parsing in settings routes
- Added integration tests for new setting
Closes#104
Users can now choose how camera streams open via Settings → General → Camera:
- "New Window" (default): Opens camera in a separate browser window
- "Embedded": Shows camera as a draggable, resizable overlay on the main screen
The embedded camera viewer features:
- Draggable header to reposition anywhere on screen
- Resizable via bottom-right corner handle
- Position and size persist to localStorage across sessions
- Minimize/maximize toggle
- Auto-reconnect with exponential backoff on stream errors
- Stall detection for frozen streams
Closes#105
- Add plug_type field to SmartPlug model ("tasmota" or "homeassistant")
- Add ha_entity_id field for Home Assistant entity reference
- Add global HA settings (ha_url, ha_token, ha_enabled) in Settings
- Create homeassistant_service.py with REST API calls for entity control
- Update smart_plug_manager to dispatch to correct service by plug_type
- Add HA entity discovery endpoint (/ha/entities)
- Add HA connection test endpoint (/ha/test-connection)
- Add Home Assistant tab in AddSmartPlugModal with entity dropdown
- Add HA settings section in Settings → Network tab
- Filter already-configured entities from dropdown
- Update backup/restore to include plug_type and ha_entity_id
- Add frontend tests for HA plug rendering
- Add backend integration tests for HA endpoints
- Update README and CHANGELOG
Closes#91
New feature: Publish BamBuddy events to external MQTT brokers for integration
with Home Assistant, Node-RED, and other automation platforms.
Backend changes:
- New MQTTRelayService (backend/app/services/mqtt_relay.py) with paho-mqtt
- MQTT settings added to AppSettings schema (enabled, broker, port, auth, TLS)
- New /settings/mqtt/status endpoint for connection status
- Event hooks in main.py, print_queue.py, print_scheduler.py, maintenance.py, smart_plugs.py
- PrinterInfo class and get_printer() method added to PrinterManager
- MQTT reconfiguration added to backup/restore flow
- Printer status throttled to 1 update/sec to avoid flooding
Frontend changes:
- New "Network" tab in Settings (between Filament and API Keys)
- FTP Retry settings moved from General to Network tab
- MQTT configuration card with broker, port, TLS toggle, auth fields
- Port auto-populates when TLS toggled (1883 ↔ 8883)
- Connection status indicator (green/red dot) in tab and card header
- Real-time status polling when on Network tab
Published topics:
- bambuddy/status - Online/offline
- bambuddy/printers/{serial}/status - Printer state (throttled)
- bambuddy/printers/{serial}/print/* - Print lifecycle
- bambuddy/printers/{serial}/ams/changed - AMS changes
- bambuddy/queue/* - Queue events
- bambuddy/maintenance/* - Maintenance alerts
- bambuddy/smart_plugs/* - Plug state/energy
- bambuddy/archive/* - Archive events
Tests:
- Added MQTT settings and status endpoint tests
Closes#78
Implement comprehensive theme customization with independent settings for
dark and light modes:
- Style layer: Classic (clean shadows), Glow (accent-colored glow effects),
Vibrant (dramatic deep shadows)
- Background layer: Neutral, Warm, Cool (light mode); plus OLED, Slate,
Forest (dark mode only)
- Accent colors: Green, Teal, Blue, Orange, Purple, Red
All combinations work independently (e.g., Glow + Forest + Teal). Settings
sync across devices via database and show toast confirmations on change.
Backend:
- Add 6 new settings fields (dark_style, dark_background, dark_accent,
light_style, light_background, light_accent)
- Add integration test for theme settings API
Frontend:
- Refactor index.css with 3-layer CSS variable system
- Update ThemeContext for dual-mode theme management
- Add Appearance section to Settings page with 6 dropdowns
- Update components for new ThemeContext API
- Virtual printer appears in Bambu Studio/Orca Slicer via SSDP discovery
- Secure TLS/MQTT communication with auto-generated certificates
- Queue mode (pending uploads) or auto-start mode
- Configurable access code for authentication
- Docker support with network_mode: host and certificate persistence
- Fix backup/restore for virtual printer settings (auto-save no longer overwrites)
- Add database model for storing AMS sensor history (humidity, temperature)
- Record sensor data every 5 minutes via background task
- Add API endpoint to retrieve history with min/max/avg statistics
- Create AMSHistoryModal component with Recharts line charts
- Make humidity/temperature indicators clickable to open history
- Support time range selection (6h, 24h, 48h, 7d)
- Show threshold reference lines on charts (Good/Fair levels)
- Add configurable data retention (default 30 days) in Settings
- Auto-cleanup old data daily
- Fix dark theme styling in modal using inline styles
- Add Escape key to close modal
- Add dynamic humidity indicator with Bambu Lab style water drop icons
- Empty drop for good (dry), half-filled for fair, full for bad (wet)
- Configurable thresholds via Settings page
- Add dynamic temperature indicator with thermometer icons
- Empty for good, half-filled for fair, full for hot
- Colors match humidity: green/gold/red
- Add AMS Display Thresholds settings card
- Humidity thresholds (good/fair) configurable
- Temperature thresholds (good/fair) configurable
- Persisted in backend settings
- Fix AMS card stability issues
- Add ams_extruder_map to WebSocket broadcasts
- Cache AMS data and extruder map to prevent bouncing
- Fix L/R nozzle indicator for dual-nozzle H2 printers
- Fix status summary bar counting
- Don't count printers with unknown status as offline
- Theme-aware L/R nozzle badges (light/dark theme support)
Thomas Rambach