Ambient drying: automatically dry filament on idle printers when
humidity exceeds threshold, regardless of queue state. Separate toggle
from queue auto-drying — both can run simultaneously. Uses the same
presets, humidity threshold, and power constraint detection.
Fix: block mode (wait for drying) previously skipped the humidity
auto-stop check for already-drying printers, causing drying to
continue indefinitely. Now only prevents starting new drying.
Queue auto-drying: scheduler automatically starts drying on idle printers
with scheduled queue prints when AMS humidity exceeds the configured
threshold. Uses conservative parameters (lowest temp, longest duration)
for mixed filaments. Drying stops when humidity drops below threshold
(30-minute minimum prevents oscillation), when scheduled items are
removed, or when the feature is disabled. Optional "block queue" mode
delays the next print until drying completes.
Configurable presets: temperature and duration per filament type,
editable in Settings → Print Queue, used by both manual drying popover
and queue auto-drying. Separate presets for AMS 2 Pro (n3f) and AMS-HT
(n3s) reflecting different heating capabilities.
PSU detection: drying button disabled with tooltip when dry_sf_reason
indicates insufficient power. Parses drying status bits and dry_sf_reason
from AMS info hex string via MQTT.
Backend: print_scheduler.py (+316 lines), bambu_mqtt.py, printer_manager,
schemas, settings route. Frontend: PrintersPage drying presets prop,
SettingsPage drying config UI, i18n (7 locales). Tests: 27 new tests in
test_scheduler_auto_drying.py covering conservative params, presets,
state sync, stop logic, minimum drying time, and auto-stop regressions.
* AMS Labels addition to PrintersPage
* Added database reinitialization for schema migrations on database restore
* Bug fixes and AMS Label persistence updates
* Update database.py to resolve PR conflicts
* PR Comment Resolution
* Resolve conflicts in database.py for PR#570
* Updates to address PR#570 additional comments
* Optimize visibility handling for popup component
* Improve serial key handling in printers.py
Refactor serial key assignment to handle empty AMS serial gracefully.
* Implement error handling in serial number mapping
Add error handling for serial number mapping.
* Add migration to drop old ams_labels table
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
* feat(queue): show spool grams left in filament slot mapping
* Bumped version
* Add SpoolBuddy AMS slot config, external slots, and dashboard redesign
- AMS page: external spool slots (Ext/Ext-L/Ext-R), click-to-configure
modal on all slots, temperature/humidity threshold-colored indicators,
nozzle L/R badges for dual-nozzle printers, compact AMS-HT layout
- Dashboard: two-column layout with device status + printers list (left)
and current spool card (right), state-colored scale/NFC icons, dashed
border card styling
- Daemon: suppress redundant scale reports (±2g threshold + stability
state change detection) to prevent weight display bouncing
- TopBar: auto-select online printers only, SpoolBuddy logo
* Fix SpoolBuddy daemon crash when read_tag module is missing
NFCReader.__init__ imported read_tag and instantiated PN5180() outside
the try/except block, so a missing module crashed the entire daemon.
Moved the import inside the existing try/except so the daemon gracefully
skips NFC polling — matching the scale reader's existing behavior.
* Fix SpoolBuddy daemon failing to import hardware drivers
The daemon imports read_tag and scale_diag as bare modules, but they
live in spoolbuddy/scripts/ which isn't on sys.path when systemd runs
the daemon. Added scripts/ to sys.path at startup, resolved relative
to the module file. Also moved the read_tag import inside NFCReader's
try/except (was crashing the daemon instead of skipping gracefully)
and demoted hardware-not-available messages from ERROR to INFO.
* Increase scale moving average window to reduce weight bouncing
5 samples at 100ms (500ms window) wasn't enough to smooth NAU7802 ADC
noise — the averaged value still varied by >2g between 1s report
intervals, and the stability state kept flipping, triggering a report
every cycle. Increased to 20 samples (2s window) so noise is smoothed
before reaching the reporting layer.
* Remove stability flipping as scale report trigger
When ADC noise kept the spread hovering around the 2g stability
threshold, the stable flag toggled every cycle, forcing a report with
a slightly different weight each time. Now only actual weight changes
of >=2g trigger reports. The stable flag is still included in each
report for consumers that need it.
* Fix formatting of option elements in FilamentMapping
* Make low stock threshold editable
* Add new filter for low spools
* Update bug report template to require additional fields
* Added toast for invalid imputs with locales, updated inputb field restrictions
* Minor Spoolbuddy frontend improvements
* Updated test_backend.sh
* Updated Spoolbuddy install script to strip down Raspbian
* Updated Spoolbuddy install script
* Add API key auth support to /auth/me for SpoolBuddy kiosk
When Bambuddy auth is enabled, the SpoolBuddy kiosk gets redirected to
the login page because ProtectedRoute requires a user from GET /auth/me,
which only handled JWT tokens. The kiosk daemon already has an API key
but couldn't use it to satisfy the frontend auth check.
- Backend: /auth/me now accepts API keys (Bearer bb_xxx or X-API-Key)
and returns a synthetic admin UserResponse with all permissions
- Frontend: AuthContext reads ?token= from URL on first load, stores in
localStorage, and strips from URL (prevents history/referrer leakage)
- Install script: kiosk URL now includes ?token=${API_KEY}
- Tests: 3 new integration tests (Bearer API key, X-API-Key header,
invalid key rejection)
* SpoolBuddy touch-friendly UI overhaul for 1024x600 kiosk display
Enlarge all interactive elements across 9 SpoolBuddy components to meet
44px minimum tap targets on the RPi touchscreen. Increase nav icons
(20→24px), labels (10→12px), bar heights, section headers, printer
buttons, spool visualizations, fill bars, and status indicators.
Compact the dashboard stats bar and remove the printers card. Add
fullScreen prop to ConfigureAmsSlotModal with two-column layout
(filament list left, K-profile + color right) to eliminate scrolling.
* Minor changes, CSS fixes
* Refactor usageFilter state to remove 'lowstock' option for clarity
* Move var saving to API, add test coverage
* fix: threshold validation and cleanup
* Change test input from '150' to '0'
---------
Co-authored-by: tridev <c.tripod@gmx.ch>
Co-authored-by: MartinNYHC <mz@v8w.de>
Users on the Docker `latest` tag were seeing update notifications for beta
releases (e.g. v0.2.1b) they couldn't install. The update checker now fetches
/releases instead of /releases/latest and filters by parse_version() prerelease
detection. A new toggle in Settings (default: off) lets users opt in to beta
notifications.
When enabling Spoolman, stale built-in inventory slot assignments
persisted in the database and the printer card UI still showed
assign/unassign buttons from the internal inventory. Now bulk-deletes
all SpoolAssignment records on mode switch, invalidates the frontend
spool-assignments cache, and hides inventory UI on printer cards while
Spoolman is active.
- Add HA_URL and HA_TOKEN environment variables for automatic HA
integration configuration in HA add-on deployments
- Environment variables always override database settings with
non-negotiable precedence; database values preserved for fallback
- Auto-enable integration when both env vars are set; partial config
(one env var) uses database enable state without auto-enabling
- Add centralized get_homeassistant_settings() function following
Spoolman pattern; replace direct database queries across codebase
- Add ha_url_from_env, ha_token_from_env, ha_env_managed fields to
AppSettings schema to inform frontend about configuration source
- UI shows read-only fields with lock icons and "(Environment Managed)"
labels when env-controlled; toggle shows auto-enable badge
- Add comprehensive test coverage: 9 integration + 8 unit tests
Closes#283
- Replace number inputs with select dropdowns for retry attempts,
retry delay, and connection timeout to avoid auto-save race conditions
- Move connection timeout inside the FTP retry toggle section
- Add ftp_timeout to backend settings schema and integer parsing list
so the value actually persists (was silently dropped before)
Closes#275
Implement accurate per-filament usage tracking for Spoolman integration,
similar to OpenSpoolman v0.3.0. This replaces the previous single-spool
reporting with multi-material aware tracking.
Features:
- Parse G-code from 3MF files at print start to build per-layer,
per-filament cumulative extrusion maps
- Store tracking data in new `active_print_spoolman` database table
(survives server restarts for long prints)
- Report accurate partial usage when prints fail/cancel based on
actual layer progress and G-code data
- Add "Disable AMS Weight Sync" setting to prevent AMS percentage-based
weight estimates from overwriting Spoolman's granular tracking
- Add "Report Partial Usage for Failed Prints" toggle (only shown when
weight sync is disabled)
- Use Spoolman's filament density instead of defaults for mm-to-grams
conversion
- Prefer tray_uuid over tag_uid for spool identification
- SSDP proxy for cross-network setups: select slicer network interface for automatic printer discovery via SSDP relay
- FTP proxy now listens on privileged port 990 (matching Bambu Studio expectations) instead of 9990
- For systemd: requires `AmbientCapabilities=CAP_NET_BIND_SERVICE` capability
- Automatic directory permission checking at startup with clear error messages for Docker/bare metal
Introduces a new "Proxy Mode" for the Virtual Printer that enables
remote printing from anywhere in the world without VPN, port forwarding,
or Bambu Cloud dependency.
Bambuddy acts as a TLS relay between a remote slicer (Bambu Studio/
OrcaSlicer) and the local Bambu Lab printer:
Remote Slicer → Internet → Bambuddy Server → Local Network → Printer
The slicer connects to Bambuddy using the real printer's serial number
and access code. Bambuddy authenticates and relays all FTP (file transfer)
and MQTT (commands/status) traffic with end-to-end TLS encryption.
- No port forwarding required - printer stays safely on local network
- No VPN needed - connect from coffee shops, hotels, work, anywhere
- No Bambu Cloud dependency - fully self-hosted solution
- End-to-end TLS encryption on FTP (port 9990) and MQTT (port 8883)
- Works with Bambu Studio and OrcaSlicer
- Uses real printer credentials for authentication
- Automatic printer selection from connected printers
- Add SlicerProxyManager class for TLS relay (tcp_proxy.py)
- TLS termination with auto-generated certificates
- Concurrent FTP and MQTT proxy servers
- Connection lifecycle management with proper cleanup
- Extend VirtualPrinterManager with proxy mode support
- New 'proxy' mode alongside archive/review/queue modes
- Target printer selection and credential management
- Add proxy configuration endpoints to settings API
- Add permission checks for proxy endpoints
- Add Proxy Mode card to Virtual Printer settings
- Target printer dropdown for proxy destination
- Real-time proxy status display (ports, target, running state)
- Full i18n support (English, German)
- Add network architecture diagram
- Add proxy mode section to README
- Add comprehensive guide to wiki
- Add prominent feature section to website
- Backend unit tests for SlicerProxyManager
- Backend unit tests for proxy mode configuration
- Frontend tests for proxy mode UI components
Closes#207#170
Proxy mode changes:
- Replace transparent TCP proxy with TLS-terminating proxy
- Slicer connects to Bambuddy cert, Bambuddy connects to printer
- Use real printer's serial number for SSDP and certificate
- This ensures MQTT topic subscriptions match the real printer
The proxy now:
1. Accepts TLS from slicer using Bambuddy's certificate
2. Opens TLS connection to real printer
3. Forwards decrypted data bidirectionally
Also: Complete i18n localization for VirtualPrinterSettings component
Replace the complex JSON-based backup system (~2000 lines) with a simple
approach that copies the SQLite database and all data directories into a
single ZIP file.
Backend changes:
- Add close_all_connections() and reinitialize_database() helpers to database.py
- New GET /backup endpoint: creates complete ZIP with bambuddy.db and all
data directories (archive, virtual_printer, plate_calibration, icons, projects)
- New POST /restore endpoint: extracts ZIP, replaces database and directories,
requires restart after restore
- Move legacy endpoints to /backup-legacy and /restore-legacy for transition
Frontend changes:
- Simplify api.exportBackup() - no longer takes category parameters
- Simplify api.importBackup() - no longer takes overwrite parameter
- Remove BackupModal and RestoreModal components from GitHubBackupSettings
- Add simple Download/Restore buttons with inline logic
- Add blocking modal overlay during backup/restore operations
- Add beforeunload handler to prevent accidental navigation
- Show operation status messages during backup/restore
Benefits:
- ~100 lines vs ~2000 lines of backup/restore code
- Complete by definition - SQLite database contains ALL data
- No code changes needed when schema changes
- No ID remapping required - IDs stay the same
- Faster - file copy vs querying all tables
Resolved conflicts:
- CHANGELOG.md: Kept both HA Script Support and STL Thumbnail features
- database.py: Kept both migration sets (UNIQUE constraint removal + queue columns)
- SmartPlugCard.tsx: Merged script UI support with base styling
- static/: Rebuilt frontend with merged changes
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implement a full permissions system replacing simple admin/user roles:
Backend:
- Add Group model with many-to-many user relationship
- Add 50+ granular permissions (resource:action pattern)
- Create default groups: Administrators, Operators, Viewers
- Add permission-checking dependencies for route protection
- Add groups API endpoints (CRUD, user assignment)
- Add change password endpoint for users
- Update backup/restore to include groups
- Migrate existing users to groups on startup
Frontend:
- Add GroupsPage for managing groups and permissions
- Add permission helpers to AuthContext (hasPermission, hasAnyPermission)
- Add PermissionRoute component for protected routes
- Disable buttons/features based on permissions (with tooltips)
- Add change password modal in sidebar for all users
- Add forgot password info modal on login page
- Show user groups in UsersPage with group assignment
Testing:
- Add integration tests for groups API
- Add tests for user-group assignments
- Add tests for change password endpoint
- Seed default groups in test fixtures
Closes#28#161
- Add separate MQTT topics for power, energy, and state monitoring
- mqtt_power_topic, mqtt_power_path, mqtt_power_multiplier
- mqtt_energy_topic, mqtt_energy_path, mqtt_energy_multiplier
- mqtt_state_topic, mqtt_state_path, mqtt_state_on_value
- Support different MQTT topics per data type (e.g., Zigbee2MQTT with
separate power/energy/state topics)
- Individual multipliers for power and energy (e.g., mW→W, Wh→kWh)
- Configurable ON value for state monitoring (e.g., "ON", "true", "1")
- Maintain backward compatibility with legacy mqtt_topic/mqtt_multiplier
- Database migration auto-copies legacy fields to new fields
- Update backup/restore to handle new MQTT fields
- Add backend tests for new MQTT configurations
- Update frontend form with organized Power/Energy/State sections
Closes#173
Enhance Home Assistant script support with automation triggers and
printer card visibility control.
- Script automation: Run scripts automatically when main plug turns on/off
- Show/hide scripts on printer cards (configurable per script)
- Scripts appear in dedicated row on printer cards with quick-run buttons
- Toast notification when triggering scripts from settings/sidebar
Closes#176
Add support for MQTT-based smart plugs that subscribe to external MQTT
topics and extract power/energy data from JSON payloads. This enables
integration with Zigbee2MQTT, Shelly, Tasmota discovery, and other
MQTT-enabled energy monitoring devices.
Features:
- New "mqtt" plug type alongside tasmota and homeassistant
- Subscribe to any MQTT topic with configurable JSON paths
- Extract power, energy, and state values using dot notation
- Optional multiplier for unit conversion (mW to W, etc.)
- Monitor-only mode (no on/off control) with teal color scheme
- Reuses existing MQTT broker settings from network configuration
- Energy data included in statistics and per-print tracking
- Full backup/restore support for MQTT plug configurations
Closes#173
Add new setting "Check printer firmware" in Settings → General → Updates
that allows users to disable automatic firmware update checks from
Bambu Lab servers.
Closes#169
Model-based queue assignment:
- Extract printer_model from sliced 3MF files during upload
- Display sliced-for model in archive view
- New queue mode: assign to "Any [Model]" instead of specific printer
- Scheduler auto-assigns to first idle printer of matching model
- Filament validation: only assign to printers with required filament types loaded
- Waiting reason display shows why jobs are waiting (e.g., "Waiting for filament: Printer1 (needs PLA)")
- "Waiting" status badge (purple) distinguishes from regular "Pending"
Queue notifications (7 new events):
- Job Added: When a job is added to queue
- Job Assigned: When a model-based job is assigned to a printer
- Job Started: When a queue job starts printing
- Job Waiting: When a job is waiting for filament (enabled by default)
- Job Skipped: When a job is skipped due to previous failure (enabled by default)
- Job Failed: When a job fails to start (enabled by default)
- Queue Complete: When all queued jobs finish
Backend changes:
- New columns: print_queue.target_model, print_queue.required_filament_types, print_queue.waiting_reason
- New columns: notification_providers.on_queue_job_* (7 event triggers)
- Notification templates for all queue events
- Scheduler validates filament compatibility before model-based assignment
- Queue API extracts filament types from 3MF when adding model-based items
- Local backup/restore includes queue notification settings
Frontend changes:
- TypeScript interfaces updated for new fields
- Queue page shows waiting reason and "Waiting" badge
- Notification settings includes "Print Queue" section with 7 toggles
Closes#162
Expose printer telemetry at /api/v1/metrics in Prometheus text format for
integration with Grafana, Prometheus, and other monitoring systems.
Backend:
- Add metrics.py route with GET /api/v1/metrics endpoint
- Support optional bearer token authentication
- Export printer metrics: connection, state, temperatures, fans, WiFi
- Export print metrics: progress, remaining time, layer count
- Export statistics: prints by status, filament used, print time
- Export queue metrics: pending and active jobs
- Add prometheus_enabled and prometheus_token settings
Frontend:
- Add Prometheus Metrics card in Settings → Network tab
- Toggle to enable/disable metrics endpoint
- Optional bearer token field for authentication
- Display list of available metrics
Tests:
- Add test_metrics_api.py with 7 integration tests
- Test access control (disabled, enabled, token auth)
- Test metrics format and content validation
New feature to automatically backup K-profiles, cloud profiles, and app
settings to a GitHub repository with scheduled or on-demand execution.
Features:
- Configure GitHub repo URL and Personal Access Token
- Schedule backups hourly, daily, or weekly (background scheduler)
- Manual backup trigger with real-time progress tracking
- Skip unchanged commits (only creates commit when data changes)
- Backup history log with status and commit links
- Requires Bambu Cloud login for full profile access
- New Settings → Backup & Restore tab consolidating all backup options
- GitHub backup config included in local backup/restore (except PAT)
Backend:
- New models: GitHubBackupConfig, GitHubBackupLog
- New service: GitHubBackupService with scheduler and GitHub API client
- New routes: /github-backup/* for config, status, logs, and triggers
- Updated settings.py to include github_backup in backup/restore
Frontend:
- New GitHubBackupSettings.tsx component with auto-save
- Updated SettingsPage with Backup tab and status indicator
- Added API types and methods to client.ts
Tests:
- Backend integration tests for all GitHub backup API endpoints
- Frontend API type and endpoint tests
- Add "Plate Detection" option to backup modal
- Store printer_id_to_serial mapping in backup for calibration files
- Remap printer IDs during restore based on serial numbers so files
like printer_3_ref_0.jpg get correctly renamed if printer 3 becomes
printer 2 on the new system
- Add parents=True to mkdir calls in config.py to fix startup crash
- Labels/metadata are now correctly restored via the metadata.json files
Thomas Rambach