Two-part root cause for missing photos/filament/cost on large prints
(#972). The configured ftp_timeout was only plumbed through as the FTP
socket timeout; the asyncio.wait_for wrapping run_in_executor stayed on
its 60s hardcoded default, so the user's 300s setting never applied.
Worse, asyncio.wait_for cannot cancel run_in_executor threads — after
the 60s outer timeout fired, the executor thread kept running
ftplib.retrbinary and frequently completed the download ~30–60s later,
but by then the async wrapper had returned False. with_ftp_retry kept
re-attempting the same path, each retry truncating the file the zombie
thread had just written, and the archive was ultimately persisted as a
fallback with no 3MF.
download_file_async now accepts timeout at each call site (plumbed from
ftp_timeout) and salvages post-timeout success via an explicit
completion flag the executor thread sets only after download_to_file
returns True. Per-attempt completion dict so a prot_p zombie can't
flip the flag for a later prot_c attempt. A cosmetic // prefix in the
directory-search download path is also fixed by replacing string
concatenation with posixpath.join.
Four attempts at making the printer-card SD badge stable on H2D all failed:
the final straw was powering on an A1 causing every connected H2D to flip to
red simultaneously. Bambu firmware SD signaling is not reliably derivable
from MQTT — the legacy `sdcard` field is sporadic and inconsistently typed,
and home_flag bits 8-9 are cleared on heartbeat pushes regardless of card
state with no clean way to distinguish heartbeats from full status reports.
Remove the badge from the Printers page card and the Printer Info modal,
drop `sdcard` from the frontend PrinterStatus type, and strip all home_flag
derivation and heartbeat-handling code from the MQTT parser.
`state.sdcard` is retained on the backend and populated only from a plain
truthy read of the `sdcard` field, because firmware_update.py uses it as a
precondition before starting firmware installs.
Third follow-up on the H2D SD card badge. The prior 3-strike downgrade still
lost the race: on idle printers, a nearby printer coming online (e.g. an A1
reconnecting) triggered an MQTT activity burst that let idle H2Ds accumulate
≥3 heartbeat home_flag pushes before the next full push_status, flipping every
H2D badge to red at once.
Reworked the derivation:
- the top-level `sdcard` field is authoritative when present (truthy check
handles bool / int / "HAS_SDCARD_NORMAL" string variants)
- home_flag bits 8-9 are only consulted on full push_status payloads
(detected via ≥2 of gcode_state, mc_percent, nozzle_temper, print_type,
stg_cur, ams)
- bare heartbeat pushes carrying home_flag alone no longer affect SD state
Removed the now-dead `_home_flag_seen` latch and 3-strike counter. Tests in
TestSdCardParsing rewritten to cover the new semantics.
H2D sends heartbeat-style home_flag pushes where bits 8-9 are clear
even when a card is inserted, so a single heartbeat flipped the badge
to red until the next full push. Downgrades true->false now require
three consecutive clear reads; upgrades apply immediately.
Parse `sdcard` from `home_flag` bits 8-9 (HAS_SDCARD_NORMAL /
HAS_SDCARD_ABNORMAL) when available and fall back to a type-tolerant
truthy check on the top-level `sdcard` field. Firmware ships that
field inconsistently (bool, int `1`, or string `"HAS_SDCARD_NORMAL"`),
so the previous `is True` identity check flipped the badge to red on
every report that carried a non-bool value.
Surface four Home Assistant-style controls on the Printers page card:
- SD Card badge in the top status row (green / red, icon-only).
- Enclosure Door badge in the top status row (green / yellow, icon-only).
Detection per printer family — X1/X1C/X1E read home_flag bit 23, all
others read top-level `stat` (hex string) bit 23 — so X1 firmware that
does not flip stat bit 23 stops false-triggering "open". WebSocket
status-change dedup key now includes door_open so toggling the door
alone publishes a push, no 30s REST-poll wait.
- Airduct Mode badge beside the speed control (cooling / heating)
for P2S/H2D/H2C/H2S; one-click dropdown calls the existing
set_airduct MQTT command via a new POST /printers/{id}/airduct-mode
route.
- Force Refresh entry in the kebab menu — calls the existing
/printers/{id}/refresh-status endpoint to request a pushall snapshot
without forcing a reconnect.
Tests: door-open parsing (X1 home_flag, non-X1 stat, ignore mismatched
source, invalid hex) and airduct route (validation, not-connected,
success, failure).
The Printer tab AMS popup and spool auto-provisioner resolved color
names from hardcoded tray_id_name tables with a suffix-code fallback —
and suffix codes like "R1" are not globally unique across material
families. A17-R1 (PLA Translucent Cherry Pink) fell through the
fallback and resolved to "Scarlet Red" (A01-R1, PLA Matte), baking
the wrong name into auto-created inventory spools.
The fix removes the hardcoded tables entirely. Backend resolves color
names via the existing color_catalog table by hex; frontend fetches a
compact {hex: name} map once per session via a new
GET /inventory/colors/map endpoint (auth-gated but not on
inventory:read — read-only views need it too) and stores it in a
ColorCatalogProvider context. A useSyncExternalStore hook cascades a
re-render into pages mounted before the fetch completes so they
refresh from HSL-fallback names once the catalog loads.
Existing auto-provisioned spools keep their stored names; only new
provisioning and live display benefit. Co-Authored-By is intentionally
omitted here per project convention — set it via git config if needed.
The Statistics page reported "Gesamt" (All Time) kWh correctly but showed
zero for Today/Week/Month in total-consumption mode. Two bugs drove it:
1. The starting plug counter was kept in an in-memory dict
`_print_energy_start` that was lost on any backend restart mid-print, so
the per-print `energy_kwh` delta silently never got computed. The stats
endpoint's fallback path `SUM(PrintArchive.energy_kwh)` therefore summed
to zero for users running in total mode.
2. Total-consumption mode has no per-print delta by design — it includes
idle/preheat/standby — so the fallback to archive rows was the wrong
strategy even when the data existed.
Fix, in two parts:
- Persist `energy_start_kwh` on the archive row and read it back from a
fresh session at print end. Deletes `_print_energy_start` and its 5
call sites, replacing them with a single `_record_energy_start()` helper.
Per-print tracking is now restart-resilient regardless of tracking mode.
- Add hourly `smart_plug_energy_snapshots` table + `_snapshot_loop()` in
SmartPlugManager. Rewrote the `/archives/stats` energy branch as
`_sum_snapshot_deltas()` which computes per-plug
`max(0, last-in-range - baseline)` where baseline is the latest snapshot
at or before the range start, falling back to the earliest-ever snapshot
and signalling `energy_data_warming_up` when no pre-range baseline
exists (fresh upgrade). MQTT plugs are skipped from snapshots since they
only report "today" and have no lifetime counter.
Frontend: QuickStatsWidget renders an AlertTriangle next to Energy Used /
Energy Cost with a tooltip when `energy_data_warming_up` is true, so the
"low values right after upgrading" situation is explained in-product.
Fully localised across 7 UI languages.
Tests: new backend unit tests cover the snapshot delta arithmetic
(baseline/endpoint, counter reset clamp, multi-plug, warming-up fallback,
endpoint windowing), per-print restart resilience via expunge_all, and the
snapshot task lifecycle (start idempotent, stop cancels). Frontend tests
assert the warning icon appears only when the flag is set and only on the
energy tiles.
Docs: updated `CHANGELOG.md`, `README.md`, wiki `features/energy.md`,
wiki `features/statistics.md`, and website `features.html` with the new
behaviour and warming-up explanation.
detect_current_branch() was reading .git/HEAD from settings.base_dir,
which points at the data volume (DATA_DIR=/app/data in Docker) and
never contains .git. The repo is at /app, so the lookup always failed
and the code fell through to the GIT_BRANCH env-var → "main" fallback.
The SpoolBuddy device was therefore checking out `main` regardless of
which branch Bambuddy itself was running.
The old subprocess-based implementation had the same bug but it was
masked: the stock Docker image has no `git` binary, so `git rev-parse`
raised FileNotFoundError, the except clause swallowed it, and the
fallback kicked in. Swapping to filesystem reads exposed the wrong
lookup path.
Add a module-level _APP_DIR constant (parents[3] of the module file,
same depth as config.py uses for its own _app_dir) and read `.git/HEAD`
from there. A regression test plants a decoy .git in the data dir and
asserts we still pick up the real one from the app root.
Per your NO GIT WRITES rule, nothing is staged or committed.
Follow-up to the asyncssh migration. asyncssh.connect() internally
calls getpass.getuser() for ~/.ssh/config host matching, regardless
of the explicit `username=` passed for the remote login. Under an
arbitrary Docker PUID with no /etc/passwd entry, getpass.getuser()
raises "No username set in the environment" (OSError in Python 3.13+,
previously a bare KeyError).
Fix: set LOGNAME=bambuddy, USER=bambuddy, HOME=/app in the Dockerfile.
getpass.getuser() tries env vars before pwd.getpwuid(), so the lookup
never touches the passwd database and works for any PUID the operator
picks — no helper code, no image rebuild for different UIDs.
Also pass config=[] to asyncssh.connect() so it does not try to load
~/.ssh/config (whose default path needs a resolvable home directory).
An earlier draft of this fix added a Python helper that caught the
KeyError and injected LOGNAME at module import. That was both more
code than needed and broken on Python 3.13, which wraps the KeyError
in an OSError the helper didn't catch — so the module import itself
crashed, producing a 500 on /spoolbuddy/devices/{id}/update. Reverted
in favour of the one-line ENV fix.
Follow-up to the previous commit that swapped the `ssh`/`ssh-keygen`
subprocesses for asyncssh. asyncssh.connect() internally calls
getpass.getuser() to resolve the *local* username for ~/.ssh/config
host matching, regardless of the explicit `username=` we pass for the
remote login. Under an arbitrary Docker PUID with no /etc/passwd
entry, getpass.getuser() tries LOGNAME/USER/LNAME/USERNAME (all unset
in python:3.13-slim) and falls back to pwd.getpwuid(), which raises
KeyError. asyncssh rewraps that as "Unknown local username: set one
of LOGNAME, USER, LNAME, or USERNAME in the environment" — which
surfaced in the UI as "ssh connection failed: no username set in the
environment".
Fix is two-part:
- _ensure_local_username_env() runs at module import. If getpass
.getuser() already works, or any of LOGNAME/USER/LNAME/USERNAME is
set, it is a no-op. Otherwise it sets LOGNAME=bambuddy so asyncssh
can proceed. Native installs are untouched.
- asyncssh.connect() is now called with config=[] to skip the
default ~/.ssh/config load, which relies on a resolvable home
directory that may not exist under arbitrary Docker PUIDs.
Three new unit tests cover the env-var fallback, including the case
where the operator has set USER but the passwd lookup still fails.
Commit 67749565 eliminated ssh-keygen from the SpoolBuddy remote-update
flow, but the update path still shelled out to the OpenSSH `ssh` client
for every command. Like ssh-keygen, the `ssh` binary calls
getpwuid(getuid()) during startup and aborts with "No user exists for
uid <N>" when the container runs under an arbitrary PUID that isn't in
/etc/passwd (python:3.13-slim only ships a root entry, so any
`user: "1000:1000"` compose setup trips the same error).
detect_current_branch() had a related problem: when the git repo is
bind-mounted into the container, .git exists inside Docker, so the code
tried to run `git rev-parse`. Git isn't in the image, so the subprocess
silently fell back to the GIT_BRANCH env var — and if git ever were
added, it could hit the same getpwuid trap.
The entire update path is now subprocess-free:
- _run_ssh_command uses asyncssh (pure-Python, built on the already
installed cryptography library). Connection errors map to rc=255 to
match `ssh`'s convention; asyncio.timeout handles the timeout path.
- detect_current_branch reads .git/HEAD directly (handling git-worktree
`gitdir:` pointer files too), keeping the same GIT_BRANCH → "main"
fallback chain.
- shutil and the inline `import subprocess` are gone from the module.
Regression tests assert that neither keypair creation, branch
detection, nor command execution spawns any subprocess. Native installs
are unaffected.
The SpoolBuddy remote-update flow shelled out to `ssh-keygen` to create
its update keypair on first use. Inside the Docker container the process
runs under an arbitrary PUID that is not listed in /etc/passwd, so
ssh-keygen aborted at the getpwuid() home-directory lookup with
"no user exists for uid 1001" and the update button failed.
Generate the ed25519 keypair in-process via the `cryptography` library
(already a dependency) and serialize it in OpenSSH format. No subprocess,
no /etc/passwd lookup. Native installs are unaffected.
Added a regression test that asserts no subprocess is spawned during
keypair creation so this can't come back.
Two related LDAP authentication changes.
Fix: POSIX primary group membership was ignored. authenticate_ldap_user
only searched for posixGroup entries via memberUid (supplementary
groups). A user's primary group — referenced by the gidNumber attribute
on the user object matching gidNumber on a posixGroup — was never
resolved, so users whose role came from their primary group landed
without the expected permissions. The authenticator now runs a second
search for posixGroup entries whose gidNumber matches the user's
primary gidNumber, then dedupes DNs case-insensitively before passing
the list to resolve_group_mapping (LDAP DNs are case-insensitive by
spec).
New feature: ldap_default_group setting. Settings → Authentication →
LDAP → Advanced has a new "Default group" selector. When an LDAP user
authenticates but is not listed in any mapped LDAP group, they are
assigned to this fallback group instead of being left with no groups
(and therefore no permissions). A warning is logged each time the
fallback is applied so admins can spot missing group assignments.
Empty setting preserves the old behavior.
Tests: added 4 mocked authenticate_ldap_user tests covering primary
gidNumber lookup, dedupe of overlapping memberUid+primary gid matches,
case-insensitive DN dedupe, and the guard when a user entry has no
gidNumber attribute. Also extended the existing parse_ldap_config tests
to cover the new default_group field.
Backend: ldap_service.py (primary group + dedupe + default_group
field), schemas/settings.py (schema field), api/routes/auth.py
(fallback wiring in _provision_ldap_user / _sync_ldap_user).
Frontend: LDAPSettings.tsx default-group dropdown in the Advanced
collapsible, api/client.ts type field, new i18n keys in all 7 locales
(defaultGroup, defaultGroupNone, defaultGroupHint).
Users can authenticate against an LDAP/AD server with configurable
server URL, bind DN, search base, and user filter. Supports StartTLS
and LDAPS — plaintext is not allowed. Both Active Directory (memberOf)
and POSIX groups (memberUid) are mapped to BamBuddy groups on each
login. Auto-provisioning creates local accounts on first LDAP login.
Local admin accounts remain as fallback when LDAP is unreachable.
Password management is disabled for LDAP users.
When multiple smart plugs were assigned to the same printer, only the
first plug's automation triggered. All automation paths (print start
auto-on, print complete auto-off, queue auto-off, scheduler power-on)
now iterate every plug linked to the printer. Also fix queue auto-off
hardcoded to Tasmota instead of using the correct service for the plug
type.
The dev mode probe (ams_filament_setting to ext slot) fired on every
auto-reconnect, which destabilized some firmware MQTT brokers (A1/P1)
causing a reconnect-probe-disconnect feedback loop. Now caches the
probe result across reconnects and only probes once on first connect,
with a 5s delay to let the session stabilize.
When auto-archive was off, archive_id was None at print completion so
the entire 3MF tracking path was skipped. AMS remain% fallback also
failed on printers reporting remain=-1. Now searches library files and
previous archives by filename to locate the 3MF without an archive,
and captures the AMS slot-to-tray mapping at print start so it's
available at completion regardless of archive state.
Add timeout and retry to the developer mode probe. After a keep-alive
timeout, paho auto-reconnects but the session can be half-broken: the
printer sends status but ignores commands. The probe had no recovery —
one unanswered probe permanently blocked retries. Now times out after
10s with one retry; two consecutive failures force-close the socket for
a clean reconnect.
Move H2S from the drying-unsupported blocklist to the firmware-gated
list, requiring minimum firmware 01.02.00.00 (released end of March
2026). Both remote AMS drying and queue auto-drying now work on H2S.
REST/Webhook smart plugs can now fetch power and energy data from
individual URLs instead of requiring all values in a single status
response. Each value falls back to the shared Status URL when no
separate URL is set, preserving backward compatibility. Added power
and energy multipliers for unit conversion (e.g. 0.001 for Wh→kWh).
Race condition in _update_state: dev mode probe released GIL via MQTT
publish between raw_data overwrite and vt_tray list restoration, letting
the event loop iterate over raw dict keys (strings) instead of spool
dicts. Affects A1, P1, and X1Plus firmware that don't send the fun field.
Fix: normalize vt_tray dict→list before raw_data assignment, restore
preserved fields before any GIL-releasing work, add defensive guard in
printer_state_to_dict.
Single-nozzle printers (X1C, P1S, A1) report tray_now=254 for external
spool, but BambuStudio sends ams_id=255 (VIRTUAL_TRAY_MAIN_ID) in the
print command's ams_mapping2 field. Bambuddy was passing 254 as-is,
causing firmware to target AMS tray 0 instead of external spool —
resulting in 07FF_8012 "Failed to get AMS mapping table" or prints stuck
at heatbed heating when an AMS is connected but empty.
Map external spool to ams_id=255 for all non-H2D printers. H2D
dual-nozzle printers retain 254 (deputy) / 255 (main) distinction.
Printers with no AMS hardware (P1S/P1P with only external spool)
rejected print commands with "Failed to get AMS mapping table"
because use_ams was always sent as true. Now auto-sets use_ams=false
when all filament slots map to external spools or are unmapped.
H2D-series excluded since they use use_ams for nozzle routing.
Auto-off now has a "Keep Enabled" toggle that keeps it active between
prints instead of disabling after each use (one-shot). Useful for HA
accessories like BentoBox filters that should always power off after
prints. Default behavior (one-shot) is unchanged.
The stale connection fix (6ac375a) force-closed the socket to trigger
paho reconnect, but paho's disconnect callback redundantly broadcast
state changes, causing rapid connected/disconnected cycling in the UI.
Now sets a flag before the force-close so _on_disconnect skips the
redundant broadcast. Also relaxed keepalive from 15s to 30s — the
aggressive interval caused spurious disconnects on transient hiccups.
Moved _disconnection_event.set() to the top of _on_disconnect so no
early-return filter can prevent it from unblocking disconnect() callers.
Removed leftover debug payload dump.
Assigning or unassigning a spool now broadcasts a spool_assignment_changed
event to all connected WebSocket clients. The frontend handles this event
by invalidating the spool-assignments and slotPresets caches, so other
open tabs update automatically without a page reload.
BambuStudio converts virtual tray IDs (254/255) to -1 in the flat
ams_mapping and relies on ams_mapping2 for external spool routing.
Bambuddy was passing raw 254/255 in the flat array, which H2D firmware
rejects with "Failed to get AMS mapping table".
- Convert external tray IDs to -1 in flat ams_mapping (match BambuStudio)
- Fix ams_mapping2 for external trays: each virtual tray is its own AMS
unit with slot_id 0, not a shared unit differentiated by slot
- Fix main/deputy nozzle ID comment (255=main, 254=deputy per BambuStudio)
- Add 8 unit tests for start_print() mapping construction
External folder scan generated thumbnails for 3mf/stl/gcode files but
skipped image files. Added IMAGE_EXTENSIONS check with
create_image_thumbnail() to the scan loop.
Some printers (e.g. H2D) only send {id, state} in incremental MQTT
tray updates — no tray_type, tray_color, or other fields. When
filament is unloaded (state changes from 11 to 10), the old tray
data persisted indefinitely because the merge logic only updates
fields present in the incoming message.
Backend:
- Detect tray state != 11 without tray_type in incremental updates
and clear stale tray data (bambu_mqtt.py)
- Expose tray `state` field via REST API and WebSocket broadcasts
(printer.py schema, printers.py route, printer_manager.py)
- Include AMS tray content in WebSocket dedup key so load/unload
transitions trigger broadcasts (main.py)
Frontend:
- Add `state` to AMSTray interface (client.ts)
- Show configure/assign buttons for state=10 (spool present, not
loaded) but hide for state=9 (truly empty) on AMS/HT slots
- Hide fill level bar on empty slots
Tests:
- 5 new tests covering state-based clearing, preservation, reload,
and idempotency
When a Bambu Lab spool is detected in the AMS but no tag match exists,
check for an untagged inventory spool with matching material/subtype/color
before creating a new entry. Links the RFID tag to the existing spool
(data_origin="rfid_linked") to prevent duplicate inventory entries.
15 backend unit tests covering keypair management, branch detection,
SSH command execution (success/failure/timeout), and full update flow
with error handling. 4 new frontend tests for the Updates tab (version
display, buttons, SSH setup, update available state).
BambuStudio connects to undocumented proprietary ports 2024-2026
on A1/P1S models during the print flow. The proxy wasn't forwarding
these ports, causing connection refused (RST) and triggering the
access code dialog instead of printing. MQTT and FTP worked fine —
port 2024 was the sole blocker.
Added transparent TCP pass-through proxies for ports 2024-2026,
following the same pattern as the existing FileTransfer (6000) and
RTSP (322) proxies. Silently ignored on models that don't use them.
When targeting a specific printer, the scheduler's power-on-wait loop
created new MQTT clients on each attempt. Each new client re-tried the
request topic subscription, which some brokers (e.g. A1) reject by
disconnecting. This caused a 170s thrash loop leaving the connection
fragile, so the eventual print command silently failed to reach the
printer.
Cache request topic support per serial number at the class level so
new client instances inherit the knowledge and skip the subscription.
When a printer shuts down it sends a final MQTT message with
tray_exist_bits=0 and power_on_flag=false. The tray_exist_bits
clearing code processed this all-zero value, wiping every AMS
slot's filament data. On reconnect, the auto-unlink check saw
empty tray data (no color, no type) and deleted all spool
assignments as "fingerprint mismatch".
Fix: skip tray_exist_bits slot clearing when power_on_flag is
false. Defaults to true when absent for backwards compatibility.
Adds 3 regression tests covering shutdown preservation, genuine
removal still working, and missing power_on_flag fallback.
Add a "Rotate spool during drying" checkbox to the manual drying popover
for AMS 2 Pro and AMS-HT units. The firmware-level rotate_tray field was
already sent (hardcoded to false) — this makes it user-configurable.
The checkbox defaults to unchecked and resets each time the popover opens.
Firmware silently disables rotation if filament is currently loaded.
The closed-source bambu_networking DLL validates TLS connection parameters
and rejects connections where the certificate doesn't match the printer's
real BBL CA certificate. The TLS-terminating proxy presented Bambuddy's
own certificate, causing X1C/X1 prints to silently fail after verify_job.
Switch to transparent TCP proxying for FTP, FileTransfer, Camera, and FTP
data — only MQTT remains TLS-terminated (required for IP rewriting). The
slicer now gets end-to-end TLS directly with the printer's real certificate.
Changes:
- SlicerProxyManager uses TCPProxy for FTP (990), FileTransfer (6000),
Camera (322), and pre-listens on FTP data ports (50000-50100)
- Only MQTT (8883) uses TLSProxy for IP rewriting
- Remove debug logging from MQTT and FTP proxy code
- Fix install.sh missing AmbientCapabilities=CAP_NET_BIND_SERVICE
- Update module docstring, migration docs, README proxy description
- Add tests verifying transparent proxy architecture
When the slicer and printer are on different VLANs, Bambu Studio could
not send prints through the proxy because the printer's real IP leaked
through MQTT payloads, the bind protocol forwarded the real printer's
identity, file transfer and camera ports were not proxied, and FTP
data connections raced the TLS handshake on zero-byte uploads.
- Rewrite IP addresses in MQTT PUBLISH payloads (string + integer)
with proper packet framing and cross-chunk buffering
- Respond to bind/detect with VP identity via BindServer
- Add TLS proxies for port 6000 (file transfer) and 322 (RTSP camera)
- Buffer slicer FTP data during printer connection setup
- Advertise configured VP name in SSDP proxy
- Add cross-subnet SSDP wildcard listener for VPN setups
- Register UserEmailPreference model in models/__init__.py
- Add 11 unit tests for MQTT rewrite, IP conversion, SSDP name
When the slicer and printer are on different VLANs, Bambu Studio could
not send prints through the proxy because the printer's real IP leaked
through MQTT payloads, the bind protocol forwarded the real printer's
identity, the port 6000 file transfer tunnel was not proxied, and FTP
data connections raced the TLS handshake on zero-byte uploads.
- Rewrite IP addresses in MQTT PUBLISH payloads (string + integer)
with proper packet framing and cross-chunk buffering
- Respond to bind/detect with VP identity via BindServer
- Add TLS proxy for port 6000 (file transfer tunnel)
- Buffer slicer FTP data during printer connection setup
- Advertise configured VP name in SSDP proxy
- Add cross-subnet SSDP wildcard listener for VPN setups
- Register UserEmailPreference model in models/__init__.py
- Add 11 unit tests for MQTT rewrite, IP conversion, SSDP name
X1C and X1 virtual printers used legacy SSDP model codes
(3DPrinter-X1-Carbon, 3DPrinter-X1) that BambuStudio doesn't
recognize, causing "incompatible printer preset" errors when
sending prints. Changed to the correct codes (BL-P001, BL-P002)
that real printers report via SSDP.
Also fixed proxy mode auto-inherit storing printer display names
(e.g. "X1C") instead of SSDP codes, by adding a resolution layer
that maps display names to model codes.
DB migration auto-converts existing VPs on startup.
Webhook providers did not include image data (e.g. camera snapshots
from first layer complete notifications) even though other providers
like Telegram, Pushover, and Discord already attached them. The webhook
payload now includes a base64-encoded "image" field when a snapshot is
available (generic format only, excluded from Slack format).
The Debian ffmpeg package uses GnuTLS, whose hardened defaults reject
TLS renegotiation and legacy ciphers that some Bambu printer firmwares
(notably P2S) rely on — causing RTSP sessions to drop after a few
seconds.
Add a local TLS termination proxy (Python ssl/OpenSSL) that handles
the TLS connection to the printer and exposes a plain RTSP port to
ffmpeg. The proxy rewrites RTSP request-line URLs (rtsp://proxy →
rtsps://printer) while preserving Authorization headers so Digest
auth hashes remain valid.
Also:
- Reduce RTSP reconnect delay from 1.0s to 0.2s
- Add ffmpeg fast-start flags (-probesize 32, -analyzeduration 0,
-fflags nobuffer, -flags low_delay)
- Fix external camera double rate-limiting causing choppy streams
- Apply TLS proxy to external camera rtsps:// URLs and snapshot capture
- Update orphan ffmpeg cleanup to match rtsp:// (proxied) URLs
- Add unit tests for RTSP URL rewriting and proxy lifecycle
Non-script HA entities (switch/light/input_boolean) on the printer card
always sent turn_on when clicked, which is a no-op when the switch is
already on. Now sends toggle for non-script entities so the badge click
actually changes the switch state. Script entities still use turn_on.
Also fix SmartPlugManager._get_plug_for_printer() using
scalar_one_or_none() which crashes with MultipleResultsFound when
multiple plugs are assigned to the same printer (e.g., Tasmota + HA
switch). Now fetches all plugs and returns the main non-script plug.
Add tests for both fixes: _get_plug_for_printer multi-plug handling
(5 tests) and canonicalFilamentType/filamentTypesCompatible/autoMatch
PA-CF equivalence (8 tests).
maziggy