With Auto Off enabled and another job queued, the smart plug cut power when a
print finished and immediately re-powered the printer because the scheduler
saw pending items. The printer booted fresh into IDLE and the next job
auto-dispatched, bypassing the "Clear Plate & Start Next" confirmation.
Root cause: the plate-clear gate lived only in PrinterManager._plate_cleared
(in-memory set) and _is_printer_idle treated IDLE as unconditionally idle. On
power cycle the in-memory flag was lost and the IDLE-on-boot state skipped
the gate entirely.
Fix:
- Replace the in-memory flag with an awaiting_plate_clear column on the
printers table, rehydrated into the PrinterManager at startup.
- Set the flag in on_print_complete for completed/failed prints (not user
cancellations); clear it on ack and on scheduler dispatch.
- _is_printer_idle now short-circuits to not-idle whenever require_plate_clear
is on and the flag is set, regardless of the currently reported state —
so the gate holds through power cycles, Bambuddy restarts, and the printer
booting back into IDLE.
- /printers/{id}/clear-plate no longer requires the printer to report
FINISH/FAILED; it accepts the ack whenever the flag is raised.
- Frontend widgets (PrinterQueueWidget, Layout, BulkPrinterToolbar) gate on
the flag rather than reported state.
Tests: added regression tests for IDLE+awaiting=True (the #961 case) and
full DB round-trip tests for the persistence layer.
The Statistics page reported "Gesamt" (All Time) kWh correctly but showed
zero for Today/Week/Month in total-consumption mode. Two bugs drove it:
1. The starting plug counter was kept in an in-memory dict
`_print_energy_start` that was lost on any backend restart mid-print, so
the per-print `energy_kwh` delta silently never got computed. The stats
endpoint's fallback path `SUM(PrintArchive.energy_kwh)` therefore summed
to zero for users running in total mode.
2. Total-consumption mode has no per-print delta by design — it includes
idle/preheat/standby — so the fallback to archive rows was the wrong
strategy even when the data existed.
Fix, in two parts:
- Persist `energy_start_kwh` on the archive row and read it back from a
fresh session at print end. Deletes `_print_energy_start` and its 5
call sites, replacing them with a single `_record_energy_start()` helper.
Per-print tracking is now restart-resilient regardless of tracking mode.
- Add hourly `smart_plug_energy_snapshots` table + `_snapshot_loop()` in
SmartPlugManager. Rewrote the `/archives/stats` energy branch as
`_sum_snapshot_deltas()` which computes per-plug
`max(0, last-in-range - baseline)` where baseline is the latest snapshot
at or before the range start, falling back to the earliest-ever snapshot
and signalling `energy_data_warming_up` when no pre-range baseline
exists (fresh upgrade). MQTT plugs are skipped from snapshots since they
only report "today" and have no lifetime counter.
Frontend: QuickStatsWidget renders an AlertTriangle next to Energy Used /
Energy Cost with a tooltip when `energy_data_warming_up` is true, so the
"low values right after upgrading" situation is explained in-product.
Fully localised across 7 UI languages.
Tests: new backend unit tests cover the snapshot delta arithmetic
(baseline/endpoint, counter reset clamp, multi-plug, warming-up fallback,
endpoint windowing), per-print restart resilience via expunge_all, and the
snapshot task lifecycle (start idempotent, stop cancels). Frontend tests
assert the warning icon appears only when the flag is set and only on the
energy tiles.
Docs: updated `CHANGELOG.md`, `README.md`, wiki `features/energy.md`,
wiki `features/statistics.md`, and website `features.html` with the new
behaviour and warming-up explanation.
Users can authenticate against an LDAP/AD server with configurable
server URL, bind DN, search base, and user filter. Supports StartTLS
and LDAPS — plaintext is not allowed. Both Active Directory (memberOf)
and POSIX groups (memberUid) are mapped to BamBuddy groups on each
login. Auto-provisioning creates local accounts on first LDAP login.
Local admin accounts remain as fallback when LDAP is unreachable.
Password management is disabled for LDAP users.
Per-model start/end G-code snippets configurable in Settings (Workflow
tab). Queue items get "Inject G-code" toggle — scheduler injects
snippets into a temp 3MF copy before FTP upload. Supports Farmloop,
SwapMod, AutoClear, Printflow 3D and similar bed-clearing systems.
Original files are never modified.
New SJF toggle badge on the queue page. When enabled, the scheduler
picks shorter print jobs before longer ones instead of FIFO. A
starvation guard flags jobs that get skipped once, moving them to
the front on the next cycle so long jobs can't be postponed indefinitely.
- Add print_time_seconds and been_jumped columns to PrintQueueItem
- Cache print duration from 3MF metadata at queue item creation
- SJF query: printer_id, target_model, been_jumped DESC, print_time_seconds ASC, position
- Mark jumped items in-memory after each print start
- Toggle badge on queue page header with live state indicator
- Frontend auto-sorts to match scheduler order when SJF enabled
- Settings schema, boolean parsing, and migration (SQLite + PostgreSQL)
- i18n badge keys for all 7 locales
- 10 integration tests for SJF ordering and starvation logic
- Wiki, website, README, and changelog updated
Bambuddy can now use an external PostgreSQL database via the
DATABASE_URL environment variable. SQLite remains the default.
Dialect-aware helpers handle upserts, PRAGMAs, FTS (FTS5 vs
tsvector+GIN), backup/restore, and health checks. All migration
blocks use savepoints to prevent Postgres transaction poisoning.
Backups are always portable SQLite format regardless of backend.
Cross-database restore imports SQLite backups into PostgreSQL
with automatic boolean/datetime conversion, NOT NULL default
filling, and FK constraint handling.
REST/Webhook smart plugs can now fetch power and energy data from
individual URLs instead of requiring all values in a single status
response. Each value falls back to the shared Status URL when no
separate URL is set, preserving backward compatibility. Added power
and energy multipliers for unit conversion (e.g. 0.001 for Wh→kWh).
GitHub backup can now optionally include spool inventory (with usage
history) and print archive metadata as JSON. Both toggles are off by
default. No binary files (gcode/3MF) are included.
Auto-off now has a "Keep Enabled" toggle that keeps it active between
prints instead of disabling after each use (one-shot). Useful for HA
accessories like BentoBox filters that should always power off after
prints. Default behavior (one-shot) is unchanged.
The daemon now collects CPU temp, core count, load average, memory/disk
usage, OS info, and system uptime every heartbeat using stdlib-only reads
from /proc and /sys. Stats are sent as a JSON blob in the heartbeat
payload, stored in a new system_stats TEXT column, and displayed in a
new "System" tab in SpoolBuddy Settings with color-coded usage bars.
SpoolBuddy devices can now be updated from Settings → Updates without
SSH access. The daemon picks up an "update" command via its existing
heartbeat, runs git fetch/reset + pip install, reports progress back
to the backend, then exits for systemd to restart with the new code.
Backend: update_status/update_message fields, trigger + status endpoints
Daemon: _perform_update() handler, report_update_status() API method
Frontend: "Apply Update" button with live progress in UpdatesTab
When all matching printers were busy and a job was queued with ASAP
timing, the scheduler immediately fired a "Job Waiting for Filament"
notification even though the job was just waiting for a printer to
finish — no user action required.
Added _is_busy_only() check to skip the waiting notification when the
only reason is "Busy". Notifications still fire for actionable reasons
(missing filament, offline, wrong color). Also renamed the default
notification template title to "Queue Job Waiting" and updated
descriptions across all 7 locales.
When the slicer and printer are on different VLANs, Bambu Studio could
not send prints through the proxy because the printer's real IP leaked
through MQTT payloads, the bind protocol forwarded the real printer's
identity, the port 6000 file transfer tunnel was not proxied, and FTP
data connections raced the TLS handshake on zero-byte uploads.
- Rewrite IP addresses in MQTT PUBLISH payloads (string + integer)
with proper packet framing and cross-chunk buffering
- Respond to bind/detect with VP identity via BindServer
- Add TLS proxy for port 6000 (file transfer tunnel)
- Buffer slicer FTP data during printer connection setup
- Advertise configured VP name in SSDP proxy
- Add cross-subnet SSDP wildcard listener for VPN setups
- Register UserEmailPreference model in models/__init__.py
- Add 11 unit tests for MQTT rewrite, IP conversion, SSDP name
Per-printer camera rotation (0°/90°/180°/270°) for cameras mounted
in portrait or upside-down. CSS rotation for live views, Pillow
rotation for notification snapshots. Setting visible in external
camera config when enabled.
Add tests, docs, and ruff fixes for per-user email notifications
- Fix missing timezone import in email_service.py (F821)
- Fix unused lambda arg in main.py asyncio done_callback (ARG005)
- Fix E302 blank line spacing for mark_printer_stopped_by_user
- Fix F821/UP037 forward reference in user_email_pref model
- Fix SettingsPage test for duplicate "Notifications" text
- Add backend unit tests for permissions, schemas, and templates
- Add backend integration tests for user-notifications API
- Add frontend tests for NotificationsPage
- Add user_email_pref model import to test conftest
- Update CHANGELOG and README
Notify users when the first layer finishes printing so they can check
adhesion remotely. Triggers once per print when layer 2 begins
(layer_num >= 2, capped at <= 5 to handle reconnects). Includes a
camera snapshot attachment. Adds the on_first_layer_complete toggle
to all notification providers, with backend/frontend/i18n support
across all 7 locales.
Cloud credentials were stored globally — one Bambu Cloud account per
Bambuddy instance. When auth was enabled, any user logging into Cloud
overwrote everyone else's credentials. Credentials are now stored
per-user: each user gets their own independent Cloud login.
Also fixed cloud data endpoints (settings, fields, preset CRUD)
requiring settings:read/settings:update permissions instead of
cloud:auth — users who had "Cloud Auth" enabled but "Settings"
disabled couldn't load profiles after logging in.
Virtual printers in Queue mode now have an "Auto-dispatch" setting.
When enabled (default), prints start automatically — preserving current
behavior. When disabled, prints are added with manual_start so they
wait for manual dispatch from the queue UI.
* AMS Labels addition to PrintersPage
* Added database reinitialization for schema migrations on database restore
* Bug fixes and AMS Label persistence updates
* Update database.py to resolve PR conflicts
* PR Comment Resolution
* Resolve conflicts in database.py for PR#570
* Updates to address PR#570 additional comments
* Optimize visibility handling for popup component
* Improve serial key handling in printers.py
Refactor serial key assignment to handle empty AMS serial gracefully.
* Implement error handling in serial number mapping
Add error handling for serial number mapping.
* Add migration to drop old ams_labels table
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
Floating bug report button submits issues via bambuddy.cool relay (no GitHub
token needed locally). Collects 30s debug logs with printer push_all, sanitizes
all sensitive data, uploads logs as files to GitHub. Screenshot upload/paste/drag
with JPEG compression. Translated into all 7 languages. Includes 21 tests.
Write NTAG213/215/216 tags for third-party spools via the SpoolBuddy
kiosk UI. New "Write" page with three workflows: existing spool, new
spool creation, and tag replacement. Backend encodes 133-byte OpenTag3D
NDEF payloads (material, color, brand, weight, temp). Daemon writes
page-by-page via PN5180 NTAG WRITE command with read-back verification.
Write commands flow through heartbeat polling with WebSocket status
updates. Includes 39 new tests and translations for all 6 languages.
SpoolBuddy's "Link to Spool" used the generic updateSpool API which only
set tag_uid, leaving tag_type and data_origin empty. Now uses linkTagToSpool
with tag_type='generic' and data_origin='nfc_link'.
Added a "Weight Check" inventory column (hidden by default) that compares
each spool's last scale measurement against calculated gross weight with
±50g tolerance. Shows green check for match, yellow warning + sync button
for mismatch. Backend stores last_scale_weight and last_weighed_at on each
spool when weight is synced via SpoolBuddy. Includes edge case handling
when scale weight < core weight. i18n keys added for all 6 locales.
Add weight_locked flag to spools that auto-sets when weight_used is
explicitly updated via the API. Both the MQTT AMS remain% auto-sync and
the manual force-sync endpoint skip locked spools. Usage tracker delta
tracking is unaffected. Users can re-enable AMS sync by setting
weight_locked to false.
When scheduling a print to "any printer" (model-based assignment),
users can now override the 3MF's original filament choices per slot.
The override dropdown shows compatible filaments loaded across all
printers of the selected model, filtered by type and nozzle (H2D).
The scheduler matches against overridden type/color instead of the
original 3MF values, preferring printers with exact color matches.
Backend:
- New GET /printers/available-filaments endpoint (aggregates loaded
filaments across printers of a model, includes extruder_id for
dual-nozzle nozzle-aware filtering)
- New filament_overrides JSON column on print_queue table
- Scheduler applies overrides before AMS mapping, clears tray_info_idx
on overridden slots so color matching takes priority
- Printer selection prefers printers with most override color matches
Frontend:
- New FilamentOverride component with per-slot override dropdowns
- Type-filtered options (PLA slots only show PLA)
- Nozzle-aware filtering (H2D: only shows filaments on correct extruder)
- Integrated into PrintModal for model-based queue mode
Tests:
- 11 backend unit tests (color match counting, override application)
- 12 frontend tests (rendering, type/nozzle filtering, interactions)
i18n: All 6 locales (en, de, fr, it, ja, pt-BR)
SpoolBuddy turns a Raspberry Pi 4B with a PN5180 NFC reader and
NAU7802 scale into a filament management station that integrates
with Bambuddy via REST API and WebSocket.
Backend: SpoolBuddyDevice model, 10 REST endpoints (/spoolbuddy/*),
6 WebSocket broadcast types, background offline-detection watchdog.
RPi daemon: asyncio service with concurrent NFC polling (300ms,
MIFARE Classic + Bambu HKDF key derivation), scale reading (10 SPS,
5-sample moving average, stability detection), and 10s heartbeat
with exponential backoff reconnect.
Frontend: kiosk-optimized 1024x600 UI at /spoolbuddy with Dashboard
(live weight + NFC spool detection), AMS Overview, Inventory,
Printers, and Settings pages. useSpoolBuddyState reducer hook
driven by WebSocket CustomEvents.
i18n: all 6 locales (en, de, fr, it, ja, pt-BR).
Multiple Virtual Printers:
- Each VP gets a dedicated bind IP with independent FTP, MQTT, SSDP, and Bind services
- New VirtualPrinter DB model, CRUD API (/api/virtual-printers), React UI
- VirtualPrinterList, VirtualPrinterCard, VirtualPrinterAddDialog components
- Per-instance TLS certificates (shared CA), 11 printer models, all 4 modes
- Auto-incremented serial suffixes, network interface override per VP
Dual Bind/Detect Ports (#445):
- Listen on both ports 3000 and 3002 for slicer bind/detect handshake
- Different BambuStudio/OrcaSlicer versions use different ports
- Applies to BindServer (server mode) and SlicerProxyManager (proxy mode)
- Updated Dockerfile, docker-compose.yml, firewall rules in wiki
Also:
- Rewrote VP test suite for new multi-instance architecture (75 tests)
- Rewritten "How it works" section with 3-step workflow explanation
- Updated all 5 locales (en, de, ja, fr, it)
- Updated wiki and website for multi-VP + dual ports
- New multi-VP screenshot
Add a chronological, table-based print log as a 4th view mode in the
Archives page. Log entries are stored in a separate print_log_entries
table — clearing the log never touches archives or queue items.
Backend:
- New PrintLogEntry model with independent table
- GET /print-log/ endpoint with search, printer, user, status, date filters
- DELETE /print-log/ clears only log entries
- Thumbnail serving endpoint for log entries
- write_log_entry() service called on print completion
- Auth: ARCHIVES_READ for viewing, ARCHIVES_DELETE_ALL for clearing
Frontend:
- New 'log' ViewMode with ClipboardList icon toggle
- Filterable/searchable table with pagination (10/25/50/100 rows)
- Colored status badges, duration formatting, filament color swatches
- Clear button with confirmation modal
- All filter state persisted to localStorage
- i18n: EN, DE, JA, FR, IT translations
Notify users when the print bed cools below a configurable threshold
(default 35°C) after a print finishes, so they know when to remove parts.
- Backend: DB migration, model, schemas, notification template, service
method, background cooldown monitor (polls every 15s, 30min timeout)
- Frontend: event toggle in provider card/modal, threshold setting in
Settings > Notifications, i18n keys for all 5 locales
- Tests: 4 backend + 4 frontend tests
- Docs: README, website, wiki updated
External links behind reverse proxies (Traefik, nginx) block iframe
embedding via X-Frame-Options/CSP headers. Add a per-link boolean
toggle so users can choose between iframe (default) and new-tab
behavior. Keyboard shortcuts also respect the setting.
- Fixed Edit User modal to populate email field
- Added Reset Password button to Edit User modal (advanced auth only)
- Added "Welcome Email" template for user creation
- Added "Password Reset" email template
- Removed scrollbar from Settings menu tabs
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
Users who use OrcaSlicer without Bambu Cloud can now import slicer
presets directly into Bambuddy. Supports .orca_filament, .bbscfg,
.bbsflmt, .zip, and .json exports with automatic inheritance resolution
via OrcaSlicer's GitHub base profiles (cached with 7-day TTL).
Users with local DNS can now add printers using hostnames like
printer.local or my-printer.home.lan. Updated backend schema
validation, database column width, frontend form patterns/placeholders,
and i18n labels across all locales. Added integration tests for
hostname and FQDN creation plus invalid hostname rejection.
Implement accurate per-filament usage tracking for Spoolman integration,
similar to OpenSpoolman v0.3.0. This replaces the previous single-spool
reporting with multi-material aware tracking.
Features:
- Parse G-code from 3MF files at print start to build per-layer,
per-filament cumulative extrusion maps
- Store tracking data in new `active_print_spoolman` database table
(survives server restarts for long prints)
- Report accurate partial usage when prints fail/cancel based on
actual layer progress and G-code data
- Add "Disable AMS Weight Sync" setting to prevent AMS percentage-based
weight estimates from overwriting Spoolman's granular tracking
- Add "Report Partial Usage for Failed Prints" toggle (only shown when
weight sync is disabled)
- Use Spoolman's filament density instead of defaults for mm-to-grams
conversion
- Prefer tray_uuid over tag_uid for spool identification
Sn0rrii